Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
48,884 matching · page 683/978Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-53335(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: handle ctx allocation failure DAMON_LRU_SORT allocates the damon_ctx object for its kdamond in its init function. damon_lru_sort_enabled_store() wrongly assumes the allocation will always succeed once tried. If the damon_ctx allocation was failed, therefore, code execution reaches to damon_commit_ctx() while 'ctx' is NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the NULL dereference by returning -ENOMEM if 'ctx' is NULL. | Jul 1, 2026 |
| CVE-2026-53334(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: mm/damon/reclaim: handle ctx allocation failure Patch series "mm/damon/{reclaim,lru_sort}: handle ctx allocation failures". DAMON_RECLAIM and DAMON_LRU_SORT could dereference NULL pointers if their damon_ctx object allocations fail. The bugs are expected to happen infrequently because the allocations are arguably too small to fail on common setups. But theoretically they are possible and the consequences are bad. Fix those. The issues were discovered [1] by Sashiko. This patch (of 2): DAMON_RECLAIM allocates the damon_ctx object for its kdamond in its init function. damon_reclaim_enabled_store() wrongly assumes the allocation will always succeed once tried. If the damon_ctx allocation was failed, therefore, code execution reaches to damon_commit_ctx() while 'ctx' is NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the NULL dereference by returning -ENOMEM if 'ctx' is NULL. | Jul 1, 2026 |
| CVE-2026-53333(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: mm/mincore: handle non-swap entries before !CONFIG_SWAP guard mincore_swap() also fields migration/hwpoison entries (and shmem swapin-error entries), which can exist on !CONFIG_SWAP builds when CONFIG_MIGRATION or CONFIG_MEMORY_FAILURE is enabled. The !IS_ENABLED(CONFIG_SWAP) guard ran before the non-swap-entry early return, so mincore_pte_range() can spuriously WARN and report these pages nonresident on !CONFIG_SWAP kernels. Move the guard below the non-swap-entry check so only true swap entries trip the WARN, and migration/hwpoison entries take the existing "uptodate / non-shmem" path. | Jul 1, 2026 |
| CVE-2026-53332(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd When the remoteproc starts in parallel with the NGD driver being probed, or the remoteproc is already up when the PDR lookup is being registered, or in the theoretical event that we get an interrupt from the hardware, these callbacks will operate on uninitialized data. This result in issues to boot the affected boards. One such example can be seen in the following fault, where qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work. [ 21.858578] ------------[ cut here ]------------ [ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116 ... [ 21.859251] Call trace: [ 21.859255] __queue_work+0x5e0/0x790 (P) [ 21.859265] queue_work_on+0x6c/0xf0 [ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl] [ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl] [ 21.859318] notifier_call_chain+0xa4/0x230 [ 21.859329] srcu_notifier_call_chain+0x64/0xb8 [ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common] [ 21.859355] rproc_start+0x130/0x230 [ 21.859367] rproc_boot+0x3d4/0x518 ... Move the enablement of interrupts, and the registration of SSR and PDR until after the NGD device has been registered. This could be further refined by moving initialization to the control driver probe and by removing the platform driver model from the picture. | Jul 1, 2026 |
| CVE-2026-53331(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock During the SSR/PDR down notification the tx_lock is taken with the intent to provide synchronization with active DMA transfers. But during this period qcom_slim_ngd_down() is invoked, which ends up in slim_report_absent(), which takes the slim_controller lock. In multiple other codepaths these two locks are taken in the opposite order (i.e. slim_controller then tx_lock). The result is a lockdep splat, and a possible deadlock: rprocctl/449 is trying to acquire lock: ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus but task is already holding lock: ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctrl->tx_lock); lock(&ctrl->lock); lock(&ctrl->tx_lock); lock(&ctrl->lock); The assumption is that the comment refers to the desire to not call qcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction. But any such transaction is initiated and completed within a single qcom_slim_ngd_xfer_msg(). Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torn down, all child devices are notified that the slimbus is gone and the child devices are removed. Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid the deadlock. | Jul 1, 2026 |
| CVE-2026-53330(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval() [Why & How] The aux_rd_interval array in struct dc_lttpr_caps is declared with MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset parameter passed to dp_get_eq_aux_rd_interval() can be as large as MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD. This leads to an out-of-bounds read of aux_rd_interval[7] when offset is 8. Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to accommodate the full range of valid repeater counts defined by the DP spec. (cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04) | Jul 1, 2026 |
| CVE-2026-53329(opens NVD record) | High | 7.0 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Use krealloc_array() in dal_vector_reserve() [Why & How] dal_vector_reserve() computes the allocation size as "capacity * vector->struct_size" using uint32_t arithmetic, which can silently wrap to a small value on overflow. This would cause krealloc to return a smaller buffer than expected, leading to heap overflows on subsequent vector appends. Replace krealloc() with krealloc_array() which performs an internal overflow check and returns NULL on wrap, preventing the issue. (cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707) | Jul 1, 2026 |
| CVE-2026-53328(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task() A WARN fires when systemd's user manager writes "+cpu +memory +pids" to its own subtree_control while a sched_ext scheduler is loaded: WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0 scx_cgroup_move_task+0xa8/0xb0 sched_move_task+0x134/0x290 cpu_cgroup_attach+0x39/0x70 cgroup_migrate_execute+0x37d/0x450 cgroup_update_dfl_csses+0x1e3/0x270 cgroup_subtree_control_write+0x3e7/0x440 scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu cgroup changes. It can still be NULL when scx_cgroup_move_task() runs, through this sequence: Step Result --------------------------------- ---------------------------------- 1. cpu enabled on cgroup G cpu css = A 2. cpu toggled off then on for G A killed, B created (same cgroup) 3. an exiting task keeps A alive migration skips it, A now stale 4. +memory migrates G stale A vs current B pulls cpu in 5. cpu attach runs for all tasks hits a live, cpu-unchanged task 6. scx_cgroup_move_task() on it cgrp_moving_from NULL -> WARN The mismatch is that scx_cgroup_can_attach() keys on cgroup identity while migration drives the move on css identity, so a NULL cgrp_moving_from here is a legitimate css-only migration, not a missing prep. The call is already gated on cgrp_moving_from, so just drop the warning. ops.cgroup_prep_move() and ops.cgroup_move() stay paired. | Jul 1, 2026 |
| CVE-2026-53327(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: debugobjects: Do not fill_pool() if pi_blocked_on On RT enabled kernels, fill_pool() ends up calling rtlock_lock(), which asserts if current::pi_blocked_on is set, because a task can obviously only block on one lock as otherwise the priority inheritenace chain gets corrupted. Prevent this by expanding the conditional to take current::pi_blocked_on into account. | Jul 1, 2026 |
| CVE-2026-53326(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: debugobjects: Don't call fill_pool() in early boot hardirq context When booting a debug PREEMPT_RT kernel on an ARM64 system, a "inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage" lockdep warning message was reported to the console. During early boot, interrupts are enabled before the scheduler is enabled. In this window (before SYSTEM_SCHEDULING is set) interrupts can fire and in the hard interrupt context handler attempt to fill the pool This can lead to a deadlock when the interrupt occurred when the interrupt hits a region which holds a lock that is required to be taken in the allocation path. Add a new can_fill_pool() helper and reorder the exception rule and forbid this scenario by excluding allocations from hard interrupt context. | Jul 1, 2026 |
| CVE-2026-53909(opens NVD record) | Medium | 6.5 | MCO does not correctly validate types of uploaded files. File upload validation functionality relies only on client-side checks, which can be bypassed. An authorized, low-privileged attacker can upload files with arbitrary types to the server. Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions. | Jul 1, 2026 |
| CVE-2026-53908(opens NVD record) | Medium | 4.3 | MCO is vulnerable to User Enumeration through authentication-related functionalities. The application returns distinguishable responses for valid and invalid users during username reminder and password reset operations. An attacker can leverage these differences to enumerate valid usernames and email addresses. Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions. | Jul 1, 2026 |
| CVE-2026-53907(opens NVD record) | Medium | 5.4 | MCO is vulnerable to Stored Cross‑Site Scripting (XSS) via the application logo upload functionality. An attacker with the ability to change the application logo can upload a crafted SVG file containing malicious JavaScript code that is executed when the logo is rendered or opened. Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions. | Jul 1, 2026 |
| CVE-2026-53906(opens NVD record) | High | 8.2 | MCO is vulnerable to Path Disclosure and Path Traversal in file handling functionality related to data export and upload. Improper validation of the filename parameter allows writing files to arbitrary locations as well as indirect disclosure of absolute server paths through error messages. Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions. | Jul 1, 2026 |
| CVE-2026-53905(opens NVD record) | High | 7.1 | MCO does not properly enforce authorization checks in the /customer/servlet/mco/webapi/admin-view-hierarchy/get-acl-tree-structure endpoint. An authenticated, low-privileged user can retrieve administrator access control structures without proper authorization checks. This may expose sensitive permission mappings and internal configuration details. Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions. | Jul 1, 2026 |
| CVE-2026-53904(opens NVD record) | High | 7.1 | MCO is vulnerable to Account Denial of Service due to improper implementation of password reset functionality. Each password reset request invalidates previously set password as well as previously issued temporary passwords, furthermore, password resets are not limited in any way. An attacker who provides victim's email and answer to their security question, can successfully initiate the reset process and continuously invalidate credentials, effectively locking the victim out of their account. Answering security questions has a limited number of tries which lowers the risk of this vulnerability. Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions. | Jul 1, 2026 |
| CVE-2026-53903(opens NVD record) | High | 8.1 | MCO is vulnerable to an Insecure Direct Object Reference (IDOR) vulnerability in the /customer/servlet/mco/webapi/trading-document/fetchPdfStatement endpoint. The application does not properly validate whether an authenticated user is authorized to access a requested document, allowing direct retrieval based on a user-supplied identifier. An attacker can access trading documents belonging to other users by providing a valid document ID. Although exploitation requires guessing the identifier, predictable ID patterns enable feasible enumeration, leading to unauthorized disclosure of sensitive information. Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions. | Jul 1, 2026 |
| CVE-2026-53902(opens NVD record) | Medium | 6.5 | MCO does not properly enforce authorization checks in the /customer/servlet/mco/webapi/profile-sections/group-membership endpoint. An authenticated user can modify their group membership without proper authorization checks, allowing privilege escalation. An attacker can add themselves to arbitrary groups by supplying a valid group ID, which can be obtained via other application functionalities (e.g. /customer/servlet/mco/webapi/group/picker/groups), provided he has necessary permissions, or potentially inferred through brute-force techniques. Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions. | Jul 1, 2026 |
| CVE-2026-13323(opens NVD record) | Medium | 4.1 | In Open VSX Registry before 1.0.2, the /vscode/unpkg/ endpoint serves user-supplied HTML files with Content-Type: text/html and without a Content-Security-Policy or Content-Disposition: attachment response header. An unauthenticated attacker can register a publisher account, upload a VSIX containing a crafted HTML payload, and induce an authenticated user to visit the resulting URL. The browser renders the file inline in the open-vsx.org origin context, enabling session token exfiltration, persistent Personal Access Token (PAT) generation, and unauthorized publication of malicious extension versions. Because Open VSX extensions are distributed to VS Code, VSCodium, Cursor, Windsurf, and compatible editors, a compromised extension update constitutes a supply chain attack against all downstream users. | Jul 1, 2026 |
| CVE-2026-14258(opens NVD record) | Medium | 6.5 | A flaw was found in dhcpcd's IPv6 Neighbor Discovery Router Advertisement processing. A specially crafted IPv6 Router Advertisement containing a zero-length Neighbor Discovery option can bypass validation during packet storage and later be reparsed without adequate validation, causing the parser to enter a non-advancing loop. Successful exploitation may result in excessive CPU consumption, leading to a denial of service. | Jul 1, 2026 |
| CVE-2026-7840(opens NVD record) | Critical | 9.8 | UltraVNC repeater through 1.8.2.2 contains a global buffer overflow in its embedded HTTP administration server. The functions wi_senderr() and wi_replyhdr() in repeater/webgui/webutils.c write the caller-supplied HTTP request URI into a fixed 1000-byte global buffer (hdrbuf) via unchecked sprintf calls. The HTTP receive buffer accepts URIs up to approximately 150 KB (WI_RXBUFSIZE = 153600), so an unauthenticated attacker who can reach the repeater HTTP port (default TCP 80) can overflow hdrbuf by at least 500 bytes with a single HTTP request containing a URI of 1500 bytes or longer, corrupting adjacent .bss-segment globals. The overflow occurs before any authentication check, making it reachable without credentials. A remote, unauthenticated attacker can achieve arbitrary code execution on the host running the repeater. | Jul 1, 2026 |
| CVE-2026-7839(opens NVD record) | Critical | 9.1 | UltraVNC repeater through 1.8.2.2 initializes the HTTP administration server with a hardcoded default password. In repeater/webgui/settings.c:197, when settings2.txt is absent on first run the repeater writes the literal string "adminadmi2" as the admin password via strcpy_s(saved_password, 64, "adminadmi2"). The HTTP Basic-auth handler wi_decode_auth() checks this password without rate-limiting or lockout. Any remote attacker who can reach the repeater HTTP port (default TCP 80) can authenticate as administrator using the well-known default credential on a fresh or unmodified installation, gaining full control of the repeater configuration including allow/deny rules and session visibility. | Jul 1, 2026 |
| CVE-2026-7838(opens NVD record) | High | 8.8 | UltraVNC viewer through 1.8.2.2 contains an integer overflow leading to a heap buffer overflow in the RFB protocol failure-response parsing path. In vncviewer/ClientConnection.cpp, the 4-byte network-supplied reasonLen field (type CARD32) is passed as reasonLen+1 to CheckBufferSize(). Because both operands are unsigned 32-bit, a reasonLen of 0xFFFFFFFF overflows to 0, causing CheckBufferSize to allocate only 256 bytes. The subsequent ReadString(m_netbuf, reasonLen) call then performs ReadExact for the original 4 GiB length into that 256-byte heap buffer. This overflow is reachable via rfbConnFailed (auth-scheme negotiation) and rfbVncAuthFailed (post-handshake) message types without successful authentication. A malicious VNC server, or any man-in-the-middle on the RFB stream, can trigger this condition when the victim viewer connects, potentially resulting in remote code execution as the user running the viewer. The crash was confirmed with AddressSanitizer on a portable reproduction harness (heap-buffer-overflow WRITE at offset 256). | Jul 1, 2026 |
| CVE-2026-7831(opens NVD record) | High | 7.6 | UltraVNC viewer through 1.8.2.2 contains an off-by-one stack buffer overflow in the RFB ServerInit message handler. In vncviewer/ClientConnection.cpp, when the server-supplied nameLength equals exactly 2024 the code declares a 2024-byte stack buffer _dn[2024] and calls ReadString(_dn, 2024). ReadString writes the NUL terminator at buf[length], i.e., _dn[2024], one byte past the end of the stack buffer. A malicious VNC server can trigger this condition by advertising a desktop name of length 2024 in its ServerInit message. On release builds without stack canaries the single-byte NUL overwrite adjacent stack data. On builds with /GS stack protection the canary is corrupted and the process terminates, resulting in denial of service. User interaction (connecting the viewer to the malicious server) is required. | Jul 1, 2026 |
| CVE-2026-7830(opens NVD record) | High | 7.4 | UltraVNC through 1.8.2.2 uses inadequate cryptography in the MS-Logon II authentication scheme (rfbUltraVNC_MsLogonIIAuth). In rfb/dh.cpp the Diffie-Hellman key exchange is performed with parameters that fit in an unsigned 64-bit integer (DH_MAX_BITS controls the prime size). A 64-bit DH key can be broken by Pollard's rho algorithm in under one second on current hardware. Additionally, the private exponent is generated by the rng() function, which multiplies three libc rand() values seeded from time(NULL). With approximately 31 bits of internal state and a time-based seed, the private exponent is recoverable in under a minute by a passive observer. A network attacker who can observe the MS-Logon II handshake (via sniffing, recording, or man-in-the-middle) can derive the shared DH key and decrypt the encapsulated username and password, resulting in full credential disclosure. This affects legacy MS-Logon II connections; MS-Logon III (X25519 + AES-256-GCM) is unaffected. | Jul 1, 2026 |
| CVE-2026-7829(opens NVD record) | High | 7.2 | UltraVNC repeater through 1.8.2.2 contains a post-authentication out-of-bounds write in the allow/deny rule parser. In repeater/webgui/settings.c:225-272, after strncpy_s copies a rule token into temp1[rule1] (25-byte destination) or temp2/temp3 (16-byte destination), the code unconditionally writes a NUL terminator at temp1[rule1][len] = 0 without clamping len to the destination size. When an authenticated administrator saves a rule with a token length equal to or greater than the destination size, the NUL byte is written one or more bytes past the end of the stack-allocated array, corrupting adjacent stack data. An attacker who has obtained admin credentials (including via CVE-2026-7839 default password) can trigger this to gain code execution on the repeater host. | Jul 1, 2026 |
| CVE-2026-7828(opens NVD record) | Medium | 5.3 | UltraVNC repeater through 1.8.2.2 contains an integer overflow in the HTTP request logging path. In repeater/webgui/settings.c:336, the win_log() function allocates list nodes via malloc(sizeof(struct LIST) + strlen(line)), where line is derived from HTTP request URIs. If strlen(line) is sufficiently large, the addition overflows to a value smaller than sizeof(struct LIST), causing a heap allocation smaller than required. The subsequent strcpy of the full string into the undersized allocation produces a heap buffer overflow. In the current implementation this overflow is bounded by the HTTP receive buffer size (WI_RXBUFSIZE = 153600 bytes, well below SIZE_MAX on 32-bit builds), limiting practical exploitability to a partial heap write. A remote unauthenticated attacker can trigger the theoretical overflow path by sending a maximally-sized URI in an HTTP request to the repeater HTTP port. | Jul 1, 2026 |
| CVE-2026-58519(opens NVD record) | Medium | 5.4 | Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in The Wikimedia Foundation Mediawiki - Cargo Extension allows Stored XSS. This issue affects Mediawiki - Cargo Extension: from * before 3.9.1. | Jul 1, 2026 |
| CVE-2026-58518(opens NVD record) | Medium | 6.3 | Cross-Site request forgery (CSRF) vulnerability in The Wikimedia Foundation Mediawiki - RedirectManager Extension allows Cross Site Request Forgery. This issue affects Mediawiki - RedirectManager Extension: from * before 1.3.3. | Jul 1, 2026 |
| CVE-2026-44042(opens NVD record) | Low | 3.7 | UltraVNC repeater through 1.8.2.2 contains an off-by-one error in the Base64 decode helper used for HTTP Basic authentication. In repeater/webgui/webutils.c:817, the wi_uudecode() function checks whether the input length exceeds the output buffer with a strict greater-than comparison (>), while the correct check should be greater-than-or-equal (>=). When strlen(authdata) equals sizeof(decode), the decoded output length (approximately 3/4 of input) does not overflow the buffer in current practice because the outer HTTP request bounds constrain the Authorization header. However, the defective check leaves a latent off-by-one condition that could become exploitable if the buffering constraints change. The current risk is limited to a one-byte write at the boundary of a 1024-byte stack buffer under constrained conditions. | Jul 1, 2026 |
| CVE-2026-44041(opens NVD record) | Medium | 4.3 | UltraVNC through 1.8.2.2 contains an out-of-bounds read in the wide-string to multibyte conversion helper. In rfb/dh.cpp:204, the vncWc2Mb() function passes a caller-supplied WCHAR pointer to wcslen() before any bounds check. If the caller provides a wide-character buffer that is not properly NUL-terminated, wcslen() reads past the end of the buffer until it encounters a NUL wchar, resulting in an out-of-bounds read. Under typical Win32 API usage this requires an abnormal caller contract. Impact is limited to a potential information disclosure from adjacent memory regions or a process crash (denial of service) if the over-read crosses a page boundary. | Jul 1, 2026 |
| CVE-2026-44040(opens NVD record) | Medium | 4.8 | UltraVNC through 1.8.2.2 uses a cryptographically weak pseudo-random number generator to produce VNC authentication challenge bytes. In rfb/vncauth.c:119-129, the vncRandomBytes() function seeds libc rand() with time(0) + getpid() + rand() and generates a 16-byte challenge. The combined seed space is approximately 31 bits (libc rand() internal state) and is entirely determined by publicly-observable values (wall-clock time and process ID). An attacker who can observe the authentication exchange can enumerate the seed space and predict the challenge within seconds, enabling forgery or offline brute-forcing of responses. Note: on Windows, the active code path may use vncEncryptBytes2.cpp which calls CryptGenRandom; reachability on shipped Windows binaries requires compile-graph verification and is under investigation. | Jul 1, 2026 |
| CVE-2026-14191(opens NVD record) | High | 7.8 | An out-of-bounds heap write exists in the RAR5 recovery-volume (.rev) parser in WinRAR and UnRAR (RecVolumes5::ReadHeader in recvol5.cpp). The RecItems vector is sized only when the first .rev file in a set is processed; subsequent .rev files supply an independent RecNum value that is validated against that file's own TotalCount field but never against the actual size of RecItems. A crafted set of two or more .rev files can therefore write an attacker-controlled 32-bit value (the header's RevCRC field) to RecItems[RecNum] at an attacker-controlled offset up to 65534 * sizeof(RecVolItem) bytes past the allocation, corrupting adjacent heap objects. Triggering requires the victim to run a recovery/test operation on an attacker-supplied .rev set (for example 'unrar t x.part1.rev', WinRAR 'Repair archive', or auto-recovery when extracting a volume set with a missing .rar part). This is the RAR5-path sibling of CVE-2023-40477 (which was fixed in the RAR3 path only in WinRAR 6.23). Fixed in WinRAR / RAR 7.23. | Jul 1, 2026 |
| CVE-2026-57963(opens NVD record) | Medium | 6.5 | An attacker who can send HTML chat messages (via Matrix or XMPP) can inject arbitrary styled content, phishing links, and CSS that manipulates the chat UI. This vulnerability was fixed in Thunderbird 152.0.1 and Thunderbird 140.12.1. | Jul 1, 2026 |
| CVE-2026-57962(opens NVD record) | Medium | 5.3 | A malicious LDAP server, which a Thunderbird user is configured to query for address-book autocomplete, can stash arbitrarily large amounts of attacker-supplied data into the Thunderbird LDAP client until it crashes due to memory exhaustion. This vulnerability was fixed in Thunderbird 152.0.1 and Thunderbird 140.12.1. | Jul 1, 2026 |
| CVE-2026-53488(opens NVD record) | High | 8.8 | containerd is an open-source container runtime. In versions prior to 1.7.33, 2.3.2, 2.2.5, 2.1.9, and 2.0.10 the CRI plugin propagates labels from an image config (LABEL instruction in Dockerfile) to a container without validation. This may result in executing an arbitrary command on the host, via a plugin that consumes container labels for some operations. This issue has been fixed in versions 1.7.33, 2.3.2, 2.2.5, 2.1.9, and 2.0.10. | Jul 1, 2026 |
| CVE-2026-56278(opens NVD record) | Critical | 9.1 | Flowise before 3.1.0 (affected versions 3.0.13 and earlier) uses a weak hardcoded default secret ('flowise') for the express-session middleware when the EXPRESS_SESSION_SECRET environment variable is not set (packages/server/src/enterprise/middleware/passport/index.ts). Because this default secret is publicly visible in the source code, an attacker can forge valid signed session cookies to impersonate any user and bypass authentication. | Jun 30, 2026 |
| CVE-2026-56277(opens NVD record) | Medium | 6.5 | Flowise before 3.1.2 sets Access-Control-Allow-Origin to a hardcoded wildcard (*) on its text-to-speech (TTS) generation endpoint (packages/server/src/controllers/text-to-speech/index.ts), independent of the server's configured CORS policy. This bypasses the server's otherwise restrictive default CORS configuration (getCorsOptions()) and allows any webpage to make cross-origin requests that trigger TTS generation using stored credentials, enabling drive-by cross-origin credential abuse. | Jun 30, 2026 |
| CVE-2026-56264(opens NVD record) | High | 8.1 | Crawl4AI before 0.8.7 contains an arbitrary JavaScript execution vulnerability in the Docker API server's /execute_js endpoint, which accepts and executes arbitrary user-supplied JavaScript in the server's browser context with --disable-web-security enabled. An attacker can execute arbitrary JavaScript and, combined with the browser's relaxed security settings, perform server-side request forgery against internal services. | Jun 30, 2026 |
| CVE-2026-54673(opens NVD record) | Medium | 6.5 | electron-updater allows for automatic updates for Electron apps. Prior to 9.7.0, the HTTP redirect handler (HttpExecutor.prepareRedirectUrlOptions) only stripped a credential header whose key string matched exactly lowercase "authorization", exposing credentials. Other credential-bearing headers — most notably PRIVATE-TOKEN (used by GitLab's personal access token flow) and mixed-case Authorization (used by GitLab's Bearer/OAuth flow) — were not stripped and could be forwarded to an attacker-controlled cross-origin redirect destination. This issue has been fixed in version 9.7.0. | Jun 30, 2026 |
| CVE-2026-54672(opens NVD record) | High | 7.8 | electron-updater allows for automatic updates for Electron apps. Prior to 26.15.0, AppImage targets built by app-builder-lib could use an empty path component when setting the LD_LIBRARY_PATH environment variable at runtime. This causes the current working directory to be added to the dynamic linker search path, which may allow an attacker to execute arbitrary code by placing a malicious shared library in the directory from which the AppImage is launched. This issue has been fixed in version 26.15.0. | Jun 30, 2026 |
| CVE-2026-14154(opens NVD record) | Medium | 4.8 | Inappropriate implementation in DevTools in Google Chrome prior to 150.0.7871.47 allowed an attacker who convinced a user to install a malicious extension to perform UI spoofing via a crafted Chrome Extension. (Chromium security severity: Low) | Jun 30, 2026 |
| CVE-2026-14153(opens NVD record) | Medium | 5.3 | Inappropriate implementation in Glic in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who convinced a user to engage in specific UI gestures to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) | Jun 30, 2026 |
| CVE-2026-14148(opens NVD record) | Medium | 6.5 | Type Confusion in CSS in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: Low) | Jun 30, 2026 |
| CVE-2026-14144(opens NVD record) | Medium | 4.2 | Incorrect security UI in Views in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who convinced a user to engage in specific UI gestures to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) | Jun 30, 2026 |
| CVE-2026-14141(opens NVD record) | Medium | 4.3 | Incorrect security UI in Document Picture-in-Picture in Google Chrome on Android prior to 150.0.7871.47 allowed a remote attacker to perform domain spoofing via a crafted HTML page. (Chromium security severity: Low) | Jun 30, 2026 |
| CVE-2026-14140(opens NVD record) | Medium | 4.3 | Insufficient validation of untrusted input in Input in Google Chrome on Android prior to 150.0.7871.47 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) | Jun 30, 2026 |
| CVE-2026-14139(opens NVD record) | Medium | 4.2 | Inappropriate implementation in TabStrip in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who convinced a user to engage in specific UI gestures to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) | Jun 30, 2026 |
| CVE-2026-14138(opens NVD record) | Medium | 4.2 | Inappropriate implementation in WebAppInstalls in Google Chrome on Windows prior to 150.0.7871.47 allowed a remote attacker who convinced a user to engage in specific UI gestures to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) | Jun 30, 2026 |
| CVE-2026-14137(opens NVD record) | Medium | 4.2 | Insufficient validation of untrusted input in Chrome for iOS in Google Chrome on iOS prior to 150.0.7871.47 allowed a remote attacker who convinced a user to engage in specific UI gestures to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) | Jun 30, 2026 |