Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
36,904 matching · page 668/739Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2022-49535(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix null pointer dereference after failing to issue FLOGI and PLOGI If lpfc_issue_els_flogi() fails and returns non-zero status, the node reference count is decremented to trigger the release of the nodelist structure. However, if there is a prior registration or dev-loss-evt work pending, the node may be released prematurely. When dev-loss-evt completes, the released node is referenced causing a use-after-free null pointer dereference. Similarly, when processing non-zero ELS PLOGI completion status in lpfc_cmpl_els_plogi(), the ndlp flags are checked for a transport registration before triggering node removal. If dev-loss-evt work is pending, the node may be released prematurely and a subsequent call to lpfc_dev_loss_tmo_handler() results in a use after free ndlp dereference. Add test for pending dev-loss before decrementing the node reference count for FLOGI, PLOGI, PRLI, and ADISC handling. | Feb 26, 2025 |
| CVE-2022-49533(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ath11k: Change max no of active probe SSID and BSSID to fw capability The maximum number of SSIDs in a for active probe requests is currently reported as 16 (WLAN_SCAN_PARAMS_MAX_SSID) when registering the driver. The scan_req_params structure only has the capacity to hold 10 SSIDs. This leads to a buffer overflow which can be triggered from wpa_supplicant in userspace. When copying the SSIDs into the scan_req_params structure in the ath11k_mac_op_hw_scan route, it can overwrite the extraie pointer. Firmware supports 16 ssid * 4 bssid, for each ssid 4 bssid combo probe request will be sent, so totally 64 probe requests supported. So set both max ssid and bssid to 16 and 4 respectively. Remove the redundant macros of ssid and bssid. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01300-QCAHKSWPL_SILICONZ-1 | Feb 26, 2025 |
| CVE-2022-49531(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: loop: implement ->free_disk Ensure that the lo_device which is stored in the gendisk private data is valid until the gendisk is freed. Currently the loop driver uses a lot of effort to make sure a device is not freed when it is still in use, but to to fix a potential deadlock this will be relaxed a bit soon. | Feb 26, 2025 |
| CVE-2022-49528(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: media: i2c: dw9714: Disable the regulator when the driver fails to probe When the driver fails to probe, we will get the following splat: [ 59.305988] ------------[ cut here ]------------ [ 59.306417] WARNING: CPU: 2 PID: 395 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 59.310345] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 59.318362] Call Trace: [ 59.318582] <TASK> [ 59.318765] regulator_put+0x1f/0x30 [ 59.319058] devres_release_group+0x319/0x3d0 [ 59.319420] i2c_device_probe+0x766/0x940 Fix this by disabling the regulator in error handling. | Feb 26, 2025 |
| CVE-2022-49527(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: avoid null dereference in deinit If venus_probe fails at pm_runtime_put_sync the error handling first calls hfi_destroy and afterwards hfi_core_deinit. As hfi_destroy sets core->ops to NULL, hfi_core_deinit cannot call the core_deinit function anymore. Avoid this null pointer derefence by skipping the call when necessary. | Feb 26, 2025 |
| CVE-2022-49523(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: ath11k: disable spectral scan during spectral deinit When ath11k modules are removed using rmmod with spectral scan enabled, crash is observed. Different crash trace is observed for each crash. Send spectral scan disable WMI command to firmware before cleaning the spectral dbring in the spectral_deinit API to avoid this crash. call trace from one of the crash observed: [ 1252.880802] Unable to handle kernel NULL pointer dereference at virtual address 00000008 [ 1252.882722] pgd = 0f42e886 [ 1252.890955] [00000008] *pgd=00000000 [ 1252.893478] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 1253.093035] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.89 #0 [ 1253.115261] Hardware name: Generic DT based system [ 1253.121149] PC is at ath11k_spectral_process_data+0x434/0x574 [ath11k] [ 1253.125940] LR is at 0x88e31017 [ 1253.132448] pc : [<7f9387b8>] lr : [<88e31017>] psr: a0000193 [ 1253.135488] sp : 80d01bc8 ip : 00000001 fp : 970e0000 [ 1253.141737] r10: 88e31000 r9 : 970ec000 r8 : 00000080 [ 1253.146946] r7 : 94734040 r6 : a0000113 r5 : 00000057 r4 : 00000000 [ 1253.152159] r3 : e18cb694 r2 : 00000217 r1 : 1df1f000 r0 : 00000001 [ 1253.158755] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1253.165266] Control: 10c0383d Table: 5e71006a DAC: 00000055 [ 1253.172472] Process swapper/0 (pid: 0, stack limit = 0x60870141) [ 1253.458055] [<7f9387b8>] (ath11k_spectral_process_data [ath11k]) from [<7f917fdc>] (ath11k_dbring_buffer_release_event+0x214/0x2e4 [ath11k]) [ 1253.466139] [<7f917fdc>] (ath11k_dbring_buffer_release_event [ath11k]) from [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx+0x1840/0x29cc [ath11k]) [ 1253.478807] [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx [ath11k]) from [<7f8fe868>] (ath11k_htc_rx_completion_handler+0x180/0x4e0 [ath11k]) [ 1253.490699] [<7f8fe868>] (ath11k_htc_rx_completion_handler [ath11k]) from [<7f91308c>] (ath11k_ce_per_engine_service+0x2c4/0x3b4 [ath11k]) [ 1253.502386] [<7f91308c>] (ath11k_ce_per_engine_service [ath11k]) from [<7f9a4198>] (ath11k_pci_ce_tasklet+0x28/0x80 [ath11k_pci]) [ 1253.514811] [<7f9a4198>] (ath11k_pci_ce_tasklet [ath11k_pci]) from [<8032227c>] (tasklet_action_common.constprop.2+0x64/0xe8) [ 1253.526476] [<8032227c>] (tasklet_action_common.constprop.2) from [<803021e8>] (__do_softirq+0x130/0x2d0) [ 1253.537756] [<803021e8>] (__do_softirq) from [<80322610>] (irq_exit+0xcc/0xe8) [ 1253.547304] [<80322610>] (irq_exit) from [<8036a4a4>] (__handle_domain_irq+0x60/0xb4) [ 1253.554428] [<8036a4a4>] (__handle_domain_irq) from [<805eb348>] (gic_handle_irq+0x4c/0x90) [ 1253.562321] [<805eb348>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c) Tested-on: QCN6122 hw1.0 AHB WLAN.HK.2.6.0.1-00851-QCAHKSWPL_SILICONZ-1 | Feb 26, 2025 |
| CVE-2022-49520(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall If a compat process tries to execute an unknown system call above the __ARM_NR_COMPAT_END number, the kernel sends a SIGILL signal to the offending process. Information about the error is printed to dmesg in compat_arm_syscall() -> arm64_notify_die() -> arm64_force_sig_fault() -> arm64_show_signal(). arm64_show_signal() interprets a non-zero value for current->thread.fault_code as an exception syndrome and displays the message associated with the ESR_ELx.EC field (bits 31:26). current->thread.fault_code is set in compat_arm_syscall() -> arm64_notify_die() with the bad syscall number instead of a valid ESR_ELx value. This means that the ESR_ELx.EC field has the value that the user set for the syscall number and the kernel can end up printing bogus exception messages*. For example, for the syscall number 0x68000000, which evaluates to ESR_ELx.EC value of 0x1A (ESR_ELx_EC_FPAC) the kernel prints this error: [ 18.349161] syscall[300]: unhandled exception: ERET/ERETAA/ERETAB, ESR 0x68000000, Oops - bad compat syscall(2) in syscall[10000+50000] [ 18.350639] CPU: 2 PID: 300 Comm: syscall Not tainted 5.18.0-rc1 #79 [ 18.351249] Hardware name: Pine64 RockPro64 v2.0 (DT) [..] which is misleading, as the bad compat syscall has nothing to do with pointer authentication. Stop arm64_show_signal() from printing exception syndrome information by having compat_arm_syscall() set the ESR_ELx value to 0, as it has no meaning for an invalid system call number. The example above now becomes: [ 19.935275] syscall[301]: unhandled exception: Oops - bad compat syscall(2) in syscall[10000+50000] [ 19.936124] CPU: 1 PID: 301 Comm: syscall Not tainted 5.18.0-rc1-00005-g7e08006d4102 #80 [ 19.936894] Hardware name: Pine64 RockPro64 v2.0 (DT) [..] which although shows less information because the syscall number, wrongfully advertised as the ESR value, is missing, it is better than showing plainly wrong information. The syscall number can be easily obtained with strace. *A 32-bit value above or equal to 0x8000_0000 is interpreted as a negative integer in compat_arm_syscal() and the condition scno < __ARM_NR_COMPAT_END evaluates to true; the syscall will exit to userspace in this case with the ENOSYS error code instead of arm64_notify_die() being called. | Feb 26, 2025 |
| CVE-2022-49519(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: ath10k: skip ath10k_halt during suspend for driver state RESTARTING Double free crash is observed when FW recovery(caused by wmi timeout/crash) is followed by immediate suspend event. The FW recovery is triggered by ath10k_core_restart() which calls driver clean up via ath10k_halt(). When the suspend event occurs between the FW recovery, the restart worker thread is put into frozen state until suspend completes. The suspend event triggers ath10k_stop() which again triggers ath10k_halt() The double invocation of ath10k_halt() causes ath10k_htt_rx_free() to be called twice(Note: ath10k_htt_rx_alloc was not called by restart worker thread because of its frozen state), causing the crash. To fix this, during the suspend flow, skip call to ath10k_halt() in ath10k_stop() when the current driver state is ATH10K_STATE_RESTARTING. Also, for driver state ATH10K_STATE_RESTARTING, call ath10k_wait_for_suspend() in ath10k_stop(). This is because call to ath10k_wait_for_suspend() is skipped later in [ath10k_halt() > ath10k_core_stop()] for the driver state ATH10K_STATE_RESTARTING. The frozen restart worker thread will be cancelled during resume when the device comes out of suspend. Below is the crash stack for reference: [ 428.469167] ------------[ cut here ]------------ [ 428.469180] kernel BUG at mm/slub.c:4150! [ 428.469193] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 428.469219] Workqueue: events_unbound async_run_entry_fn [ 428.469230] RIP: 0010:kfree+0x319/0x31b [ 428.469241] RSP: 0018:ffffa1fac015fc30 EFLAGS: 00010246 [ 428.469247] RAX: ffffedb10419d108 RBX: ffff8c05262b0000 [ 428.469252] RDX: ffff8c04a8c07000 RSI: 0000000000000000 [ 428.469256] RBP: ffffa1fac015fc78 R08: 0000000000000000 [ 428.469276] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 428.469285] Call Trace: [ 428.469295] ? dma_free_attrs+0x5f/0x7d [ 428.469320] ath10k_core_stop+0x5b/0x6f [ 428.469336] ath10k_halt+0x126/0x177 [ 428.469352] ath10k_stop+0x41/0x7e [ 428.469387] drv_stop+0x88/0x10e [ 428.469410] __ieee80211_suspend+0x297/0x411 [ 428.469441] rdev_suspend+0x6e/0xd0 [ 428.469462] wiphy_suspend+0xb1/0x105 [ 428.469483] ? name_show+0x2d/0x2d [ 428.469490] dpm_run_callback+0x8c/0x126 [ 428.469511] ? name_show+0x2d/0x2d [ 428.469517] __device_suspend+0x2e7/0x41b [ 428.469523] async_suspend+0x1f/0x93 [ 428.469529] async_run_entry_fn+0x3d/0xd1 [ 428.469535] process_one_work+0x1b1/0x329 [ 428.469541] worker_thread+0x213/0x372 [ 428.469547] kthread+0x150/0x15f [ 428.469552] ? pr_cont_work+0x58/0x58 [ 428.469558] ? kthread_blkcg+0x31/0x31 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1 | Feb 26, 2025 |
| CVE-2022-49518(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-topology: Correct get_control_data for non bytes payload It is possible to craft a topology where sof_get_control_data() would do out of bounds access because it expects that it is only called when the payload is bytes type. Confusingly it also handles other types of controls, but the payload parsing implementation is only valid for bytes. Fix the code to count the non bytes controls and instead of storing a pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes), store the pointer to the data itself and add a new member to save the size of the data. In case of non bytes controls we store the pointer to the chanv itself, which is just an array of values at the end. In case of bytes control, drop the wrong cdata->data (wdata[i].pdata) check against NULL since it is incorrect and invalid in this context. The data is pointing to the end of cdata struct, so it should never be null. | Feb 26, 2025 |
| CVE-2022-49516(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: ice: always check VF VSI pointer values The ice_get_vf_vsi function can return NULL in some cases, such as if handling messages during a reset where the VSI is being removed and recreated. Several places throughout the driver do not bother to check whether this VSI pointer is valid. Static analysis tools maybe report issues because they detect paths where a potentially NULL pointer could be dereferenced. Fix this by checking the return value of ice_get_vf_vsi everywhere. | Feb 26, 2025 |
| CVE-2022-49511(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: fbdev: defio: fix the pagelist corruption Easily hit the below list corruption: == list_add corruption. prev->next should be next (ffffffffc0ceb090), but was ffffec604507edc8. (prev=ffffec604507edc8). WARNING: CPU: 65 PID: 3959 at lib/list_debug.c:26 __list_add_valid+0x53/0x80 CPU: 65 PID: 3959 Comm: fbdev Tainted: G U RIP: 0010:__list_add_valid+0x53/0x80 Call Trace: <TASK> fb_deferred_io_mkwrite+0xea/0x150 do_page_mkwrite+0x57/0xc0 do_wp_page+0x278/0x2f0 __handle_mm_fault+0xdc2/0x1590 handle_mm_fault+0xdd/0x2c0 do_user_addr_fault+0x1d3/0x650 exc_page_fault+0x77/0x180 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x7fd98fc8fad1 == Figure out the race happens when one process is adding &page->lru into the pagelist tail in fb_deferred_io_mkwrite(), another process is re-initializing the same &page->lru in fb_deferred_io_fault(), which is not protected by the lock. This fix is to init all the page lists one time during initialization, it not only fixes the list corruption, but also avoids INIT_LIST_HEAD() redundantly. V2: change "int i" to "unsigned int i" (Geert Uytterhoeven) | Feb 26, 2025 |
| CVE-2022-49500(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: wl1251: dynamically allocate memory used for DMA With introduction of vmap'ed stacks, stack parameters can no longer be used for DMA and now leads to kernel panic. It happens at several places for the wl1251 (e.g. when accessed through SDIO) making it unuseable on e.g. the OpenPandora. We solve this by allocating temporary buffers or use wl1251_read32(). Tested on v5.18-rc5 with OpenPandora. | Feb 26, 2025 |
| CVE-2022-49496(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: prevent kernel crash when rmmod mtk-vcodec-dec.ko If the driver support subdev mode, the parameter "dev->pm.dev" will be NULL in mtk_vcodec_dec_remove. Kernel will crash when try to rmmod mtk-vcodec-dec.ko. [ 4380.702726] pc : do_raw_spin_trylock+0x4/0x80 [ 4380.707075] lr : _raw_spin_lock_irq+0x90/0x14c [ 4380.711509] sp : ffff80000819bc10 [ 4380.714811] x29: ffff80000819bc10 x28: ffff3600c03e4000 x27: 0000000000000000 [ 4380.721934] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 [ 4380.729057] x23: ffff3600c0f34930 x22: ffffd5e923549000 x21: 0000000000000220 [ 4380.736179] x20: 0000000000000208 x19: ffffd5e9213e8ebc x18: 0000000000000020 [ 4380.743298] x17: 0000002000000000 x16: ffffd5e9213e8e90 x15: 696c346f65646976 [ 4380.750420] x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000040 [ 4380.757542] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 4380.764664] x8 : 0000000000000000 x7 : ffff3600c7273ae8 x6 : ffffd5e9213e8ebc [ 4380.771786] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 [ 4380.778908] x2 : 0000000000000000 x1 : ffff3600c03e4000 x0 : 0000000000000208 [ 4380.786031] Call trace: [ 4380.788465] do_raw_spin_trylock+0x4/0x80 [ 4380.792462] __pm_runtime_disable+0x2c/0x1b0 [ 4380.796723] mtk_vcodec_dec_remove+0x5c/0xa0 [mtk_vcodec_dec] [ 4380.802466] platform_remove+0x2c/0x60 [ 4380.806204] __device_release_driver+0x194/0x250 [ 4380.810810] driver_detach+0xc8/0x15c [ 4380.814462] bus_remove_driver+0x5c/0xb0 [ 4380.818375] driver_unregister+0x34/0x64 [ 4380.822288] platform_driver_unregister+0x18/0x24 [ 4380.826979] mtk_vcodec_dec_driver_exit+0x1c/0x888 [mtk_vcodec_dec] [ 4380.833240] __arm64_sys_delete_module+0x190/0x224 [ 4380.838020] invoke_syscall+0x48/0x114 [ 4380.841760] el0_svc_common.constprop.0+0x60/0x11c [ 4380.846540] do_el0_svc+0x28/0x90 [ 4380.849844] el0_svc+0x4c/0x100 [ 4380.852975] el0t_64_sync_handler+0xec/0xf0 [ 4380.857148] el0t_64_sync+0x190/0x194 [ 4380.860801] Code: 94431515 17ffffca d503201f d503245f (b9400004) | Feb 26, 2025 |
| CVE-2022-49479(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: mt76: fix tx status related use-after-free race on station removal There is a small race window where ongoing tx activity can lead to a skb getting added to the status tracking idr after that idr has already been cleaned up, which will keep the wcid linked in the status poll list. Fix this by only adding status skbs if the wcid pointer is still assigned in dev->wcid, which gets cleared early by mt76_sta_pre_rcu_remove | Feb 26, 2025 |
| CVE-2022-49471(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: rtw89: cfo: check mac_id to avoid out-of-bounds Somehow, hardware reports incorrect mac_id and pollute memory. Check index before we access the array. UBSAN: array-index-out-of-bounds in rtw89/phy.c:2517:23 index 188 is out of range for type 's32 [64]' CPU: 1 PID: 51550 Comm: irq/35-rtw89_pc Tainted: G OE Call Trace: <IRQ> show_stack+0x52/0x58 dump_stack_lvl+0x4c/0x63 dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x45 __ubsan_handle_out_of_bounds.cold+0x44/0x49 ? __alloc_skb+0x92/0x1d0 rtw89_phy_cfo_parse+0x44/0x7f [rtw89_core] rtw89_core_rx+0x261/0x871 [rtw89_core] ? __alloc_skb+0xee/0x1d0 rtw89_pci_napi_poll+0x3fa/0x4ea [rtw89_pci] __napi_poll+0x33/0x1a0 net_rx_action+0x126/0x260 ? __queue_work+0x217/0x4c0 __do_softirq+0xd9/0x315 ? disable_irq_nosync+0x10/0x10 do_softirq.part.0+0x6d/0x90 </IRQ> <TASK> __local_bh_enable_ip+0x62/0x70 rtw89_pci_interrupt_threadfn+0x182/0x1a6 [rtw89_pci] irq_thread_fn+0x28/0x60 irq_thread+0xc8/0x190 ? irq_thread_fn+0x60/0x60 kthread+0x16b/0x190 ? irq_thread_check_affinity+0xe0/0xe0 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> | Feb 26, 2025 |
| CVE-2022-49470(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: fix use-after-free at btmtksdio_recv_event We should not access skb buffer data anymore after hci_recv_frame was called. [ 39.634809] BUG: KASAN: use-after-free in btmtksdio_recv_event+0x1b0 [ 39.634855] Read of size 1 at addr ffffff80cf28a60d by task kworker [ 39.634962] Call trace: [ 39.634974] dump_backtrace+0x0/0x3b8 [ 39.634999] show_stack+0x20/0x2c [ 39.635016] dump_stack_lvl+0x60/0x78 [ 39.635040] print_address_description+0x70/0x2f0 [ 39.635062] kasan_report+0x154/0x194 [ 39.635079] __asan_report_load1_noabort+0x44/0x50 [ 39.635099] btmtksdio_recv_event+0x1b0/0x1c4 [ 39.635129] btmtksdio_txrx_work+0x6cc/0xac4 [ 39.635157] process_one_work+0x560/0xc5c [ 39.635177] worker_thread+0x7ec/0xcc0 [ 39.635195] kthread+0x2d0/0x3d0 [ 39.635215] ret_from_fork+0x10/0x20 [ 39.635247] Allocated by task 0: [ 39.635260] (stack is not available) [ 39.635281] Freed by task 2392: [ 39.635295] kasan_save_stack+0x38/0x68 [ 39.635319] kasan_set_track+0x28/0x3c [ 39.635338] kasan_set_free_info+0x28/0x4c [ 39.635357] ____kasan_slab_free+0x104/0x150 [ 39.635374] __kasan_slab_free+0x18/0x28 [ 39.635391] slab_free_freelist_hook+0x114/0x248 [ 39.635410] kfree+0xf8/0x2b4 [ 39.635427] skb_free_head+0x58/0x98 [ 39.635447] skb_release_data+0x2f4/0x410 [ 39.635464] skb_release_all+0x50/0x60 [ 39.635481] kfree_skb+0xc8/0x25c [ 39.635498] hci_event_packet+0x894/0xca4 [bluetooth] [ 39.635721] hci_rx_work+0x1c8/0x68c [bluetooth] [ 39.635925] process_one_work+0x560/0xc5c [ 39.635951] worker_thread+0x7ec/0xcc0 [ 39.635970] kthread+0x2d0/0x3d0 [ 39.635990] ret_from_fork+0x10/0x20 [ 39.636021] The buggy address belongs to the object at ffffff80cf28a600 which belongs to the cache kmalloc-512 of size 512 [ 39.636039] The buggy address is located 13 bytes inside of 512-byte region [ffffff80cf28a600, ffffff80cf28a800) | Feb 26, 2025 |
| CVE-2022-49456(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: bonding: fix missed rcu protection When removing the rcu_read_lock in bond_ethtool_get_ts_info() as discussed [1], I didn't notice it could be called via setsockopt, which doesn't hold rcu lock, as syzbot pointed: stack backtrace: CPU: 0 PID: 3599 Comm: syz-executor317 Not tainted 5.18.0-rc5-syzkaller-01392-g01f4685797a5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 bond_option_active_slave_get_rcu include/net/bonding.h:353 [inline] bond_ethtool_get_ts_info+0x32c/0x3a0 drivers/net/bonding/bond_main.c:5595 __ethtool_get_ts_info+0x173/0x240 net/ethtool/common.c:554 ethtool_get_phc_vclocks+0x99/0x110 net/ethtool/common.c:568 sock_timestamping_bind_phc net/core/sock.c:869 [inline] sock_set_timestamping+0x3a3/0x7e0 net/core/sock.c:916 sock_setsockopt+0x543/0x2ec0 net/core/sock.c:1221 __sys_setsockopt+0x55e/0x6a0 net/socket.c:2223 __do_sys_setsockopt net/socket.c:2238 [inline] __se_sys_setsockopt net/socket.c:2235 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2235 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f8902c8eb39 Fix it by adding rcu_read_lock and take a ref on the real_dev. Since dev_hold() and dev_put() can take NULL these days, we can skip checking if real_dev exist. [1] https://lore.kernel.org/netdev/27565.1642742439@famine/ | Feb 26, 2025 |
| CVE-2022-49453(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: soc: ti: ti_sci_pm_domains: Check for null return of devm_kcalloc The allocation funciton devm_kcalloc may fail and return a null pointer, which would cause a null-pointer dereference later. It might be better to check it and directly return -ENOMEM just like the usage of devm_kcalloc in previous code. | Feb 26, 2025 |
| CVE-2022-49452(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: dpaa2-eth: retrieve the virtual address before dma_unmap The TSO header was DMA unmapped before the virtual address was retrieved and then used to free the buffer. This meant that we were actually removing the DMA map and then trying to search for it to help in retrieving the virtual address. This lead to a invalid virtual address being used in the kfree call. Fix this by calling dpaa2_iova_to_virt() prior to the dma_unmap call. [ 487.231819] Unable to handle kernel paging request at virtual address fffffd9807000008 (...) [ 487.354061] Hardware name: SolidRun LX2160A Honeycomb (DT) [ 487.359535] pstate: a0400005 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 487.366485] pc : kfree+0xac/0x304 [ 487.369799] lr : kfree+0x204/0x304 [ 487.373191] sp : ffff80000c4eb120 [ 487.376493] x29: ffff80000c4eb120 x28: ffff662240c46400 x27: 0000000000000001 [ 487.383621] x26: 0000000000000001 x25: ffff662246da0cc0 x24: ffff66224af78000 [ 487.390748] x23: ffffad184f4ce008 x22: ffffad1850185000 x21: ffffad1838d13cec [ 487.397874] x20: ffff6601c0000000 x19: fffffd9807000000 x18: 0000000000000000 [ 487.405000] x17: ffffb910cdc49000 x16: ffffad184d7d9080 x15: 0000000000004000 [ 487.412126] x14: 0000000000000008 x13: 000000000000ffff x12: 0000000000000000 [ 487.419252] x11: 0000000000000004 x10: 0000000000000001 x9 : ffffad184d7d927c [ 487.426379] x8 : 0000000000000000 x7 : 0000000ffffffd1d x6 : ffff662240a94900 [ 487.433505] x5 : 0000000000000003 x4 : 0000000000000009 x3 : ffffad184f4ce008 [ 487.440632] x2 : ffff662243eec000 x1 : 0000000100000100 x0 : fffffc0000000000 [ 487.447758] Call trace: [ 487.450194] kfree+0xac/0x304 [ 487.453151] dpaa2_eth_free_tx_fd.isra.0+0x33c/0x3e0 [fsl_dpaa2_eth] [ 487.459507] dpaa2_eth_tx_conf+0x100/0x2e0 [fsl_dpaa2_eth] [ 487.464989] dpaa2_eth_poll+0xdc/0x380 [fsl_dpaa2_eth] | Feb 26, 2025 |
| CVE-2022-49451(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix list protocols enumeration in the base protocol While enumerating protocols implemented by the SCMI platform using BASE_DISCOVER_LIST_PROTOCOLS, the number of returned protocols is currently validated in an improper way since the check employs a sum between unsigned integers that could overflow and cause the check itself to be silently bypassed if the returned value 'loop_num_ret' is big enough. Fix the validation avoiding the addition. | Feb 26, 2025 |
| CVE-2022-49425(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix dereference of stale list iterator after loop body The list iterator variable will be a bogus pointer if no break was hit. Dereferencing it (cur->page in this case) could load an out-of-bounds/undefined value making it unsafe to use that in the comparision to determine if the specific element was found. Since 'cur->page' *can* be out-ouf-bounds it cannot be guaranteed that by chance (or intention of an attacker) it matches the value of 'page' even though the correct element was not found. This is fixed by using a separate list iterator variable for the loop and only setting the original variable if a suitable element was found. Then determing if the element was found is simply checking if the variable is set. | Feb 26, 2025 |
| CVE-2022-49418(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix free of uninitialized nfs4_label on referral lookup. Send along the already-allocated fattr along with nfs4_fs_locations, and drop the memcpy of fattr. We end up growing two more allocations, but this fixes up a crash as: PID: 790 TASK: ffff88811b43c000 CPU: 0 COMMAND: "ls" #0 [ffffc90000857920] panic at ffffffff81b9bfde #1 [ffffc900008579c0] do_trap at ffffffff81023a9b #2 [ffffc90000857a10] do_error_trap at ffffffff81023b78 #3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45 #4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de #5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs] #6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f #7 [ffffc90000857c60] walk_component at ffffffff813a86c4 #8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553 #9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86b | Feb 26, 2025 |
| CVE-2022-49416(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix use-after-free in chanctx code In ieee80211_vif_use_reserved_context(), when we have an old context and the new context's replace_state is set to IEEE80211_CHANCTX_REPLACE_NONE, we free the old context in ieee80211_vif_use_reserved_reassign(). Therefore, we cannot check the old_ctx anymore, so we should set it to NULL after this point. However, since the new_ctx replace state is clearly not IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do anything else in this function and can just return to avoid accessing the freed old_ctx. | Feb 26, 2025 |
| CVE-2022-49407(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: dlm: fix plock invalid read This patch fixes an invalid read showed by KASAN. A unlock will allocate a "struct plock_op" and a followed send_op() will append it to a global send_list data structure. In some cases a followed dev_read() moves it to recv_list and dev_write() will cast it to "struct plock_xop" and access fields which are only available in those structures. At this point an invalid read happens by accessing those fields. To fix this issue the "callback" field is moved to "struct plock_op" to indicate that a cast to "plock_xop" is allowed and does the additional "plock_xop" handling if set. Example of the KASAN output which showed the invalid read: [ 2064.296453] ================================================================== [ 2064.304852] BUG: KASAN: slab-out-of-bounds in dev_write+0x52b/0x5a0 [dlm] [ 2064.306491] Read of size 8 at addr ffff88800ef227d8 by task dlm_controld/7484 [ 2064.308168] [ 2064.308575] CPU: 0 PID: 7484 Comm: dlm_controld Kdump: loaded Not tainted 5.14.0+ #9 [ 2064.310292] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 2064.311618] Call Trace: [ 2064.312218] dump_stack_lvl+0x56/0x7b [ 2064.313150] print_address_description.constprop.8+0x21/0x150 [ 2064.314578] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.315610] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.316595] kasan_report.cold.14+0x7f/0x11b [ 2064.317674] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.318687] dev_write+0x52b/0x5a0 [dlm] [ 2064.319629] ? dev_read+0x4a0/0x4a0 [dlm] [ 2064.320713] ? bpf_lsm_kernfs_init_security+0x10/0x10 [ 2064.321926] vfs_write+0x17e/0x930 [ 2064.322769] ? __fget_light+0x1aa/0x220 [ 2064.323753] ksys_write+0xf1/0x1c0 [ 2064.324548] ? __ia32_sys_read+0xb0/0xb0 [ 2064.325464] do_syscall_64+0x3a/0x80 [ 2064.326387] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2064.327606] RIP: 0033:0x7f807e4ba96f [ 2064.328470] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 39 87 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 7c 87 f8 ff 48 [ 2064.332902] RSP: 002b:00007ffd50cfe6e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 2064.334658] RAX: ffffffffffffffda RBX: 000055cc3886eb30 RCX: 00007f807e4ba96f [ 2064.336275] RDX: 0000000000000040 RSI: 00007ffd50cfe7e0 RDI: 0000000000000010 [ 2064.337980] RBP: 00007ffd50cfe7e0 R08: 0000000000000000 R09: 0000000000000001 [ 2064.339560] R10: 000055cc3886eb30 R11: 0000000000000293 R12: 000055cc3886eb80 [ 2064.341237] R13: 000055cc3886eb00 R14: 000055cc3886f590 R15: 0000000000000001 [ 2064.342857] [ 2064.343226] Allocated by task 12438: [ 2064.344057] kasan_save_stack+0x1c/0x40 [ 2064.345079] __kasan_kmalloc+0x84/0xa0 [ 2064.345933] kmem_cache_alloc_trace+0x13b/0x220 [ 2064.346953] dlm_posix_unlock+0xec/0x720 [dlm] [ 2064.348811] do_lock_file_wait.part.32+0xca/0x1d0 [ 2064.351070] fcntl_setlk+0x281/0xbc0 [ 2064.352879] do_fcntl+0x5e4/0xfe0 [ 2064.354657] __x64_sys_fcntl+0x11f/0x170 [ 2064.356550] do_syscall_64+0x3a/0x80 [ 2064.358259] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2064.360745] [ 2064.361511] Last potentially related work creation: [ 2064.363957] kasan_save_stack+0x1c/0x40 [ 2064.365811] __kasan_record_aux_stack+0xaf/0xc0 [ 2064.368100] call_rcu+0x11b/0xf70 [ 2064.369785] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm] [ 2064.372404] receive_from_sock+0x290/0x770 [dlm] [ 2064.374607] process_recv_sockets+0x32/0x40 [dlm] [ 2064.377290] process_one_work+0x9a8/0x16e0 [ 2064.379357] worker_thread+0x87/0xbf0 [ 2064.381188] kthread+0x3ac/0x490 [ 2064.383460] ret_from_fork+0x22/0x30 [ 2064.385588] [ 2064.386518] Second to last potentially related work creation: [ 2064.389219] kasan_save_stack+0x1c/0x40 [ 2064.391043] __kasan_record_aux_stack+0xaf/0xc0 [ 2064.393303] call_rcu+0x11b/0xf70 [ 2064.394885] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm] [ 2064.397694] receive_from_sock+0x290/0x770 ---truncated--- | Feb 26, 2025 |
| CVE-2022-49405(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: staging: r8188eu: prevent ->Ssid overflow in rtw_wx_set_scan() This code has a check to prevent read overflow but it needs another check to prevent writing beyond the end of the ->Ssid[] array. | Feb 26, 2025 |
| CVE-2022-49393(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix list iterator in fastrpc_req_mem_unmap_impl This is another instance of incorrect use of list iterator and checking it for NULL. The list iterator value 'map' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty (in this case, the check 'if (!map) {' will always be false and never exit as expected). To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'map' as a dedicated pointer to point to the found element. Without this patch, Kernel crashes with below trace: Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000ffff7fb03750 ... Call trace: fastrpc_map_create+0x70/0x290 [fastrpc] fastrpc_req_mem_map+0xf0/0x2dc [fastrpc] fastrpc_device_ioctl+0x138/0xc60 [fastrpc] __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0xd4/0xfc do_el0_svc+0x28/0x90 el0_svc+0x3c/0x130 el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x18c/0x190 Code: 14000016 f94000a5 eb05029f 54000260 (b94018a6) ---[ end trace 0000000000000000 ]--- | Feb 26, 2025 |
| CVE-2022-49380(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid f2fs_bug_on() in dec_valid_node_count() As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215897 I have encountered a bug in F2FS file system in kernel v5.17. The kernel should enable CONFIG_KASAN=y and CONFIG_KASAN_INLINE=y. You can reproduce the bug by running the following commands: The kernel message is shown below: kernel BUG at fs/f2fs/f2fs.h:2511! Call Trace: f2fs_remove_inode_page+0x2a2/0x830 f2fs_evict_inode+0x9b7/0x1510 evict+0x282/0x4e0 do_unlinkat+0x33a/0x540 __x64_sys_unlinkat+0x8e/0xd0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is: .total_valid_block_count or .total_valid_node_count could fuzzed to zero, then once dec_valid_node_count() was called, it will cause BUG_ON(), this patch fixes to print warning info and set SBI_NEED_FSCK into CP instead of panic. | Feb 26, 2025 |
| CVE-2022-49364(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to clear dirty inode in f2fs_evict_inode() As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215904 The kernel message is shown below: kernel BUG at fs/f2fs/inode.c:825! Call Trace: evict+0x282/0x4e0 __dentry_kill+0x2b2/0x4d0 shrink_dentry_list+0x17c/0x4f0 shrink_dcache_parent+0x143/0x1e0 do_one_tree+0x9/0x30 shrink_dcache_for_umount+0x51/0x120 generic_shutdown_super+0x5c/0x3a0 kill_block_super+0x90/0xd0 kill_f2fs_super+0x225/0x310 deactivate_locked_super+0x78/0xc0 cleanup_mnt+0x2b7/0x480 task_work_run+0xc8/0x150 exit_to_user_mode_prepare+0x14a/0x150 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0x90 The root cause is: inode node and dnode node share the same nid, so during f2fs_evict_inode(), dnode node truncation will invalidate its NAT entry, so when truncating inode node, it fails due to invalid NAT entry, result in inode is still marked as dirty, fix this issue by clearing dirty for inode and setting SBI_NEED_FSCK flag in filesystem. output from dump.f2fs: [print_node_info: 354] Node ID [0xf:15] is inode i_nid[0] [0x f : 15] | Feb 26, 2025 |
| CVE-2022-49363(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on block address in f2fs_do_zero_range() As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215894 I have encountered a bug in F2FS file system in kernel v5.17. I have uploaded the system call sequence as case.c, and a fuzzed image can be found in google net disk The kernel should enable CONFIG_KASAN=y and CONFIG_KASAN_INLINE=y. You can reproduce the bug by running the following commands: kernel BUG at fs/f2fs/segment.c:2291! Call Trace: f2fs_invalidate_blocks+0x193/0x2d0 f2fs_fallocate+0x2593/0x4a70 vfs_fallocate+0x2a5/0xac0 ksys_fallocate+0x35/0x70 __x64_sys_fallocate+0x8e/0xf0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is, after image was fuzzed, block mapping info in inode will be inconsistent with SIT table, so in f2fs_fallocate(), it will cause panic when updating SIT with invalid blkaddr. Let's fix the issue by adding sanity check on block address before updating SIT table with it. | Feb 26, 2025 |
| CVE-2022-49362(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix potential use-after-free in nfsd_file_put() nfsd_file_put_noref() can free @nf, so don't dereference @nf immediately upon return from nfsd_file_put_noref(). | Feb 26, 2025 |
| CVE-2022-49361(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check for inline inode Yanming reported a kernel bug in Bugzilla kernel [1], which can be reproduced. The bug message is: The kernel message is shown below: kernel BUG at fs/inode.c:611! Call Trace: evict+0x282/0x4e0 __dentry_kill+0x2b2/0x4d0 dput+0x2dd/0x720 do_renameat2+0x596/0x970 __x64_sys_rename+0x78/0x90 do_syscall_64+0x3b/0x90 [1] https://bugzilla.kernel.org/show_bug.cgi?id=215895 The bug is due to fuzzed inode has both inline_data and encrypted flags. During f2fs_evict_inode(), as the inode was deleted by rename(), it will cause inline data conversion due to conflicting flags. The page cache will be polluted and the panic will be triggered in clear_inode(). Try fixing the bug by doing more sanity checks for inline data inode in sanity_check_inode(). | Feb 26, 2025 |
| CVE-2022-49360(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on total_data_blocks As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215916 The kernel message is shown below: kernel BUG at fs/f2fs/segment.c:2560! Call Trace: allocate_segment_by_default+0x228/0x440 f2fs_allocate_data_block+0x13d1/0x31f0 do_write_page+0x18d/0x710 f2fs_outplace_write_data+0x151/0x250 f2fs_do_write_data_page+0xef9/0x1980 move_data_page+0x6af/0xbc0 do_garbage_collect+0x312f/0x46f0 f2fs_gc+0x6b0/0x3bc0 f2fs_balance_fs+0x921/0x2260 f2fs_write_single_data_page+0x16be/0x2370 f2fs_write_cache_pages+0x428/0xd00 f2fs_write_data_pages+0x96e/0xd50 do_writepages+0x168/0x550 __writeback_single_inode+0x9f/0x870 writeback_sb_inodes+0x47d/0xb20 __writeback_inodes_wb+0xb2/0x200 wb_writeback+0x4bd/0x660 wb_workfn+0x5f3/0xab0 process_one_work+0x79f/0x13e0 worker_thread+0x89/0xf60 kthread+0x26a/0x300 ret_from_fork+0x22/0x30 RIP: 0010:new_curseg+0xe8d/0x15f0 The root cause is: ckpt.valid_block_count is inconsistent with SIT table, stat info indicates filesystem has free blocks, but SIT table indicates filesystem has no free segment. So that during garbage colloection, it triggers panic when LFS allocator fails to find free segment. This patch tries to fix this issue by checking consistency in between ckpt.valid_block_count and block accounted from SIT. | Feb 26, 2025 |
| CVE-2022-49356(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Trap RDMA segment overflows Prevent svc_rdma_build_writes() from walking off the end of a Write chunk's segment array. Caught with KASAN. The test that this fix replaces is invalid, and might have been left over from an earlier prototype of the PCL work. | Feb 26, 2025 |
| CVE-2022-49349(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in ext4_rename_dir_prepare We got issue as follows: EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue ext4_get_first_dir_block: bh->b_data=0xffff88810bee6000 len=34478 ext4_get_first_dir_block: *parent_de=0xffff88810beee6ae bh->b_data=0xffff88810bee6000 ext4_rename_dir_prepare: [1] parent_de=0xffff88810beee6ae ================================================================== BUG: KASAN: use-after-free in ext4_rename_dir_prepare+0x152/0x220 Read of size 4 at addr ffff88810beee6ae by task rep/1895 CPU: 13 PID: 1895 Comm: rep Not tainted 5.10.0+ #241 Call Trace: dump_stack+0xbe/0xf9 print_address_description.constprop.0+0x1e/0x220 kasan_report.cold+0x37/0x7f ext4_rename_dir_prepare+0x152/0x220 ext4_rename+0xf44/0x1ad0 ext4_rename2+0x11c/0x170 vfs_rename+0xa84/0x1440 do_renameat2+0x683/0x8f0 __x64_sys_renameat+0x53/0x60 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f45a6fc41c9 RSP: 002b:00007ffc5a470218 EFLAGS: 00000246 ORIG_RAX: 0000000000000108 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f45a6fc41c9 RDX: 0000000000000005 RSI: 0000000020000180 RDI: 0000000000000005 RBP: 00007ffc5a470240 R08: 00007ffc5a470160 R09: 0000000020000080 R10: 00000000200001c0 R11: 0000000000000246 R12: 0000000000400bb0 R13: 00007ffc5a470320 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:00000000440015ce refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x10beee flags: 0x200000000000000() raw: 0200000000000000 ffffea00043ff4c8 ffffea0004325608 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88810beee580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88810beee600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88810beee680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88810beee700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88810beee780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint ext4_rename_dir_prepare: [2] parent_de->inode=3537895424 ext4_rename_dir_prepare: [3] dir=0xffff888124170140 ext4_rename_dir_prepare: [4] ino=2 ext4_rename_dir_prepare: ent->dir->i_ino=2 parent=-757071872 Reason is first directory entry which 'rec_len' is 34478, then will get illegal parent entry. Now, we do not check directory entry after read directory block in 'ext4_get_first_dir_block'. To solve this issue, check directory entry in 'ext4_get_first_dir_block'. [ Trigger an ext4_error() instead of just warning if the directory is missing a '.' or '..' entry. Also make sure we return an error code if the file system is corrupted. -TYT ] | Feb 26, 2025 |
| CVE-2022-49343(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ext4: avoid cycles in directory h-tree A maliciously corrupted filesystem can contain cycles in the h-tree stored inside a directory. That can easily lead to the kernel corrupting tree nodes that were already verified under its hands while doing a node split and consequently accessing unallocated memory. Fix the problem by verifying traversed block numbers are unique. | Feb 26, 2025 |
| CVE-2022-49340(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: ip_gre: test csum_start instead of transport header GRE with TUNNEL_CSUM will apply local checksum offload on CHECKSUM_PARTIAL packets. ipgre_xmit must validate csum_start after an optional skb_pull, else lco_csum may trigger an overflow. The original check was if (csum && skb_checksum_start(skb) < skb->data) return -EINVAL; This had false positives when skb_checksum_start is undefined: when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement was straightforward if (csum && skb->ip_summed == CHECKSUM_PARTIAL && skb_checksum_start(skb) < skb->data) return -EINVAL; But was eventually revised more thoroughly: - restrict the check to the only branch where needed, in an uncommon GRE path that uses header_ops and calls skb_pull. - test skb_transport_header, which is set along with csum_start in skb_partial_csum_set in the normal header_ops datapath. Turns out skbs can arrive in this branch without the transport header set, e.g., through BPF redirection. Revise the check back to check csum_start directly, and only if CHECKSUM_PARTIAL. Do leave the check in the updated location. Check field regardless of whether TUNNEL_CSUM is configured. | Feb 26, 2025 |
| CVE-2022-49337(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock When user_dlm_destroy_lock failed, it didn't clean up the flags it set before exit. For USER_LOCK_IN_TEARDOWN, if this function fails because of lock is still in used, next time when unlink invokes this function, it will return succeed, and then unlink will remove inode and dentry if lock is not in used(file closed), but the dlm lock is still linked in dlm lock resource, then when bast come in, it will trigger a panic due to user-after-free. See the following panic call trace. To fix this, USER_LOCK_IN_TEARDOWN should be reverted if fail. And also error should be returned if USER_LOCK_IN_TEARDOWN is set to let user know that unlink fail. For the case of ocfs2_dlm_unlock failure, besides USER_LOCK_IN_TEARDOWN, USER_LOCK_BUSY is also required to be cleared. Even though spin lock is released in between, but USER_LOCK_IN_TEARDOWN is still set, for USER_LOCK_BUSY, if before every place that waits on this flag, USER_LOCK_IN_TEARDOWN is checked to bail out, that will make sure no flow waits on the busy flag set by user_dlm_destroy_lock(), then we can simplely revert USER_LOCK_BUSY when ocfs2_dlm_unlock fails. Fix user_dlm_cluster_lock() which is the only function not following this. [ 941.336392] (python,26174,16):dlmfs_unlink:562 ERROR: unlink 004fb0000060000b5a90b8c847b72e1, error -16 from destroy [ 989.757536] ------------[ cut here ]------------ [ 989.757709] kernel BUG at fs/ocfs2/dlmfs/userdlm.c:173! [ 989.757876] invalid opcode: 0000 [#1] SMP [ 989.758027] Modules linked in: ksplice_2zhuk2jr_ib_ipoib_new(O) ksplice_2zhuk2jr(O) mptctl mptbase xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn cdc_ether usbnet mii ocfs2 jbd2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfsv3 nfs_acl nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc scsi_transport_fc sunrpc ipmi_devintf bridge stp llc rds_rdma rds bonding ib_sdp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm falcon_lsm_serviceable(PE) falcon_nf_netcontain(PE) mlx4_vnic falcon_kal(E) falcon_lsm_pinned_13402(E) mlx4_ib ib_sa ib_mad ib_core ib_addr xenfs xen_privcmd dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 lpc_ich mfd_core ipmi_ssif i2c_core ipmi_si ipmi_msghandler [ 989.760686] ioatdma sg ext3 jbd mbcache sd_mod ahci libahci ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel megaraid_sas mlx4_core crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ksplice_2zhuk2jr_ib_ipoib_old] [ 989.761987] CPU: 10 PID: 19102 Comm: dlm_thread Tainted: P OE 4.1.12-124.57.1.el6uek.x86_64 #2 [ 989.762290] Hardware name: Oracle Corporation ORACLE SERVER X5-2/ASM,MOTHERBOARD,1U, BIOS 30350100 06/17/2021 [ 989.762599] task: ffff880178af6200 ti: ffff88017f7c8000 task.ti: ffff88017f7c8000 [ 989.762848] RIP: e030:[<ffffffffc07d4316>] [<ffffffffc07d4316>] __user_dlm_queue_lockres.part.4+0x76/0x80 [ocfs2_dlmfs] [ 989.763185] RSP: e02b:ffff88017f7cbcb8 EFLAGS: 00010246 [ 989.763353] RAX: 0000000000000000 RBX: ffff880174d48008 RCX: 0000000000000003 [ 989.763565] RDX: 0000000000120012 RSI: 0000000000000003 RDI: ffff880174d48170 [ 989.763778] RBP: ffff88017f7cbcc8 R08: ffff88021f4293b0 R09: 0000000000000000 [ 989.763991] R10: ffff880179c8c000 R11: 0000000000000003 R12: ffff880174d48008 [ 989.764204] R13: 0000000000000003 R14: ffff880179c8c000 R15: ffff88021db7a000 [ 989.764422] FS: 0000000000000000(0000) GS:ffff880247480000(0000) knlGS:ffff880247480000 [ 989.764685] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 989.764865] CR2: ffff8000007f6800 CR3: 0000000001ae0000 CR4: 0000000000042660 [ 989.765081] Stack: [ 989.765167] 00000000000 ---truncated--- | Feb 26, 2025 |
| CVE-2022-49336(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/etnaviv: check for reaped mapping in etnaviv_iommu_unmap_gem When the mapping is already reaped the unmap must be a no-op, as we would otherwise try to remove the mapping twice, corrupting the involved data structures. | Feb 26, 2025 |
| CVE-2022-49330(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd syzbot got a new report [1] finally pointing to a very old bug, added in initial support for MTU probing. tcp_mtu_probe() has checks about starting an MTU probe if tcp_snd_cwnd(tp) >= 11. But nothing prevents tcp_snd_cwnd(tp) to be reduced later and before the MTU probe succeeds. This bug would lead to potential zero-divides. Debugging added in commit 40570375356c ("tcp: add accessors to read/set tp->snd_cwnd") has paid off :) While we are at it, address potential overflows in this code. [1] WARNING: CPU: 1 PID: 14132 at include/net/tcp.h:1219 tcp_mtup_probe_success+0x366/0x570 net/ipv4/tcp_input.c:2712 Modules linked in: CPU: 1 PID: 14132 Comm: syz-executor.2 Not tainted 5.18.0-syzkaller-07857-gbabf0bb978e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcp_snd_cwnd_set include/net/tcp.h:1219 [inline] RIP: 0010:tcp_mtup_probe_success+0x366/0x570 net/ipv4/tcp_input.c:2712 Code: 74 08 48 89 ef e8 da 80 17 f9 48 8b 45 00 65 48 ff 80 80 03 00 00 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 aa b0 c5 f8 <0f> 0b e9 16 fe ff ff 48 8b 4c 24 08 80 e1 07 38 c1 0f 8c c7 fc ff RSP: 0018:ffffc900079e70f8 EFLAGS: 00010287 RAX: ffffffff88c0f7f6 RBX: ffff8880756e7a80 RCX: 0000000000040000 RDX: ffffc9000c6c4000 RSI: 0000000000031f9e RDI: 0000000000031f9f RBP: 0000000000000000 R08: ffffffff88c0f606 R09: ffffc900079e7520 R10: ffffed101011226d R11: 1ffff1101011226c R12: 1ffff1100eadcf50 R13: ffff8880756e72c0 R14: 1ffff1100eadcf89 R15: dffffc0000000000 FS: 00007f643236e700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1ab3f1e2a0 CR3: 0000000064fe7000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_clean_rtx_queue+0x223a/0x2da0 net/ipv4/tcp_input.c:3356 tcp_ack+0x1962/0x3c90 net/ipv4/tcp_input.c:3861 tcp_rcv_established+0x7c8/0x1ac0 net/ipv4/tcp_input.c:5973 tcp_v6_do_rcv+0x57b/0x1210 net/ipv6/tcp_ipv6.c:1476 sk_backlog_rcv include/net/sock.h:1061 [inline] __release_sock+0x1d8/0x4c0 net/core/sock.c:2849 release_sock+0x5d/0x1c0 net/core/sock.c:3404 sk_stream_wait_memory+0x700/0xdc0 net/core/stream.c:145 tcp_sendmsg_locked+0x111d/0x3fc0 net/ipv4/tcp.c:1410 tcp_sendmsg+0x2c/0x40 net/ipv4/tcp.c:1448 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] __sys_sendto+0x439/0x5c0 net/socket.c:2119 __do_sys_sendto net/socket.c:2131 [inline] __se_sys_sendto net/socket.c:2127 [inline] __x64_sys_sendto+0xda/0xf0 net/socket.c:2127 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f6431289109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f643236e168 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f643139c100 RCX: 00007f6431289109 RDX: 00000000d0d0c2ac RSI: 0000000020000080 RDI: 000000000000000a RBP: 00007f64312e308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff372533af R14: 00007f643236e300 R15: 0000000000022000 | Feb 26, 2025 |
| CVE-2022-49328(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: mt76: fix use-after-free by removing a non-RCU wcid pointer Fixes an issue caught by KASAN about use-after-free in mt76_txq_schedule by protecting mtxq->wcid with rcu_lock between mt76_txq_schedule and sta_info_[alloc, free]. [18853.876689] ================================================================== [18853.876751] BUG: KASAN: use-after-free in mt76_txq_schedule+0x204/0xaf8 [mt76] [18853.876773] Read of size 8 at addr ffffffaf989a2138 by task mt76-tx phy0/883 [18853.876786] [18853.876810] CPU: 5 PID: 883 Comm: mt76-tx phy0 Not tainted 5.10.100-fix-510-56778d365941-kasan #5 0b01fbbcf41a530f52043508fec2e31a4215 [18853.876840] Call trace: [18853.876861] dump_backtrace+0x0/0x3ec [18853.876878] show_stack+0x20/0x2c [18853.876899] dump_stack+0x11c/0x1ac [18853.876918] print_address_description+0x74/0x514 [18853.876934] kasan_report+0x134/0x174 [18853.876948] __asan_report_load8_noabort+0x44/0x50 [18853.876976] mt76_txq_schedule+0x204/0xaf8 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877002] mt76_txq_schedule_all+0x2c/0x48 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877030] mt7921_tx_worker+0xa0/0x1cc [mt7921_common f0875ebac9d7b4754e1010549e7db50fbd90a047] [18853.877054] __mt76_worker_fn+0x190/0x22c [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877071] kthread+0x2f8/0x3b8 [18853.877087] ret_from_fork+0x10/0x30 [18853.877098] [18853.877112] Allocated by task 941: [18853.877131] kasan_save_stack+0x38/0x68 [18853.877147] __kasan_kmalloc+0xd4/0xfc [18853.877163] kasan_kmalloc+0x10/0x1c [18853.877177] __kmalloc+0x264/0x3c4 [18853.877294] sta_info_alloc+0x460/0xf88 [mac80211] [18853.877410] ieee80211_prep_connection+0x204/0x1ee0 [mac80211] [18853.877523] ieee80211_mgd_auth+0x6c4/0xa4c [mac80211] [18853.877635] ieee80211_auth+0x20/0x2c [mac80211] [18853.877733] rdev_auth+0x7c/0x438 [cfg80211] [18853.877826] cfg80211_mlme_auth+0x26c/0x390 [cfg80211] [18853.877919] nl80211_authenticate+0x6d4/0x904 [cfg80211] [18853.877938] genl_rcv_msg+0x748/0x93c [18853.877954] netlink_rcv_skb+0x160/0x2a8 [18853.877969] genl_rcv+0x3c/0x54 [18853.877985] netlink_unicast_kernel+0x104/0x1ec [18853.877999] netlink_unicast+0x178/0x268 [18853.878015] netlink_sendmsg+0x3cc/0x5f0 [18853.878030] sock_sendmsg+0xb4/0xd8 [18853.878043] ____sys_sendmsg+0x2f8/0x53c [18853.878058] ___sys_sendmsg+0xe8/0x150 [18853.878071] __sys_sendmsg+0xc4/0x1f4 [18853.878087] __arm64_compat_sys_sendmsg+0x88/0x9c [18853.878101] el0_svc_common+0x1b4/0x390 [18853.878115] do_el0_svc_compat+0x8c/0xdc [18853.878131] el0_svc_compat+0x10/0x1c [18853.878146] el0_sync_compat_handler+0xa8/0xcc [18853.878161] el0_sync_compat+0x188/0x1c0 [18853.878171] [18853.878183] Freed by task 10927: [18853.878200] kasan_save_stack+0x38/0x68 [18853.878215] kasan_set_track+0x28/0x3c [18853.878228] kasan_set_free_info+0x24/0x48 [18853.878244] __kasan_slab_free+0x11c/0x154 [18853.878259] kasan_slab_free+0x14/0x24 [18853.878273] slab_free_freelist_hook+0xac/0x1b0 [18853.878287] kfree+0x104/0x390 [18853.878402] sta_info_free+0x198/0x210 [mac80211] [18853.878515] __sta_info_destroy_part2+0x230/0x2d4 [mac80211] [18853.878628] __sta_info_flush+0x300/0x37c [mac80211] [18853.878740] ieee80211_set_disassoc+0x2cc/0xa7c [mac80211] [18853.878851] ieee80211_mgd_deauth+0x4a4/0x10a0 [mac80211] [18853.878962] ieee80211_deauth+0x20/0x2c [mac80211] [18853.879057] rdev_deauth+0x7c/0x438 [cfg80211] [18853.879150] cfg80211_mlme_deauth+0x274/0x414 [cfg80211] [18853.879243] cfg80211_mlme_down+0xe4/0x118 [cfg80211] [18853.879335] cfg80211_disconnect+0x218/0x2d8 [cfg80211] [18853.879427] __cfg80211_leave+0x17c/0x240 [cfg80211] [18853.879519] cfg80211_leave+0x3c/0x58 [cfg80211] [18853.879611] wiphy_suspend+0xdc/0x200 [cfg80211] [18853.879628] dpm_run_callback+0x58/0x408 [18853.879642] __device_suspend+0x4cc/0x864 [18853.879658] async_suspend+0x34/0xf4 [18 ---truncated--- | Feb 26, 2025 |
| CVE-2022-49325(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: tcp: add accessors to read/set tp->snd_cwnd We had various bugs over the years with code breaking the assumption that tp->snd_cwnd is greater than zero. Lately, syzbot reported the WARN_ON_ONCE(!tp->prior_cwnd) added in commit 8b8a321ff72c ("tcp: fix zero cwnd in tcp_cwnd_reduction") can trigger, and without a repro we would have to spend considerable time finding the bug. Instead of complaining too late, we want to catch where and when tp->snd_cwnd is set to an illegal value. | Feb 26, 2025 |
| CVE-2022-49321(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: xprtrdma: treat all calls not a bcall when bc_serv is NULL When a rdma server returns a fault format reply, nfs v3 client may treats it as a bcall when bc service is not exist. The debug message at rpcrdma_bc_receive_call are, [56579.837169] RPC: rpcrdma_bc_receive_call: callback XID 00000001, length=20 [56579.837174] RPC: rpcrdma_bc_receive_call: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 After that, rpcrdma_bc_receive_call will meets NULL pointer as, [ 226.057890] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 ... [ 226.058704] RIP: 0010:_raw_spin_lock+0xc/0x20 ... [ 226.059732] Call Trace: [ 226.059878] rpcrdma_bc_receive_call+0x138/0x327 [rpcrdma] [ 226.060011] __ib_process_cq+0x89/0x170 [ib_core] [ 226.060092] ib_cq_poll_work+0x26/0x80 [ib_core] [ 226.060257] process_one_work+0x1a7/0x360 [ 226.060367] ? create_worker+0x1a0/0x1a0 [ 226.060440] worker_thread+0x30/0x390 [ 226.060500] ? create_worker+0x1a0/0x1a0 [ 226.060574] kthread+0x116/0x130 [ 226.060661] ? kthread_flush_work_fn+0x10/0x10 [ 226.060724] ret_from_fork+0x35/0x40 ... | Feb 26, 2025 |
| CVE-2022-49318(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: f2fs: remove WARN_ON in f2fs_is_valid_blkaddr Syzbot triggers two WARNs in f2fs_is_valid_blkaddr and __is_bitmap_valid. For example, in f2fs_is_valid_blkaddr, if type is DATA_GENERIC_ENHANCE or DATA_GENERIC_ENHANCE_READ, it invokes WARN_ON if blkaddr is not in the right range. The call trace is as follows: f2fs_get_node_info+0x45f/0x1070 read_node_page+0x577/0x1190 __get_node_page.part.0+0x9e/0x10e0 __get_node_page f2fs_get_node_page+0x109/0x180 do_read_inode f2fs_iget+0x2a5/0x58b0 f2fs_fill_super+0x3b39/0x7ca0 Fix these two WARNs by replacing WARN_ON with dump_stack. | Feb 26, 2025 |
| CVE-2022-49317(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: f2fs: avoid infinite loop to flush node pages xfstests/generic/475 can give EIO all the time which give an infinite loop to flush node page like below. Let's avoid it. [16418.518551] Call Trace: [16418.518553] ? dm_submit_bio+0x48/0x400 [16418.518574] ? submit_bio_checks+0x1ac/0x5a0 [16418.525207] __submit_bio+0x1a9/0x230 [16418.525210] ? kmem_cache_alloc+0x29e/0x3c0 [16418.525223] submit_bio_noacct+0xa8/0x2b0 [16418.525226] submit_bio+0x4d/0x130 [16418.525238] __submit_bio+0x49/0x310 [f2fs] [16418.525339] ? bio_add_page+0x6a/0x90 [16418.525344] f2fs_submit_page_bio+0x134/0x1f0 [f2fs] [16418.525365] read_node_page+0x125/0x1b0 [f2fs] [16418.525388] __get_node_page.part.0+0x58/0x3f0 [f2fs] [16418.525409] __get_node_page+0x2f/0x60 [f2fs] [16418.525431] f2fs_get_dnode_of_data+0x423/0x860 [f2fs] [16418.525452] ? asm_sysvec_apic_timer_interrupt+0x12/0x20 [16418.525458] ? __mod_memcg_state.part.0+0x2a/0x30 [16418.525465] ? __mod_memcg_lruvec_state+0x27/0x40 [16418.525467] ? __xa_set_mark+0x57/0x70 [16418.525472] f2fs_do_write_data_page+0x10e/0x7b0 [f2fs] [16418.525493] f2fs_write_single_data_page+0x555/0x830 [f2fs] [16418.525514] ? sysvec_apic_timer_interrupt+0x4e/0x90 [16418.525518] ? asm_sysvec_apic_timer_interrupt+0x12/0x20 [16418.525523] f2fs_write_cache_pages+0x303/0x880 [f2fs] [16418.525545] ? blk_flush_plug_list+0x47/0x100 [16418.525548] f2fs_write_data_pages+0xfd/0x320 [f2fs] [16418.525569] do_writepages+0xd5/0x210 [16418.525648] filemap_fdatawrite_wbc+0x7d/0xc0 [16418.525655] filemap_fdatawrite+0x50/0x70 [16418.525658] f2fs_sync_dirty_inodes+0xa4/0x230 [f2fs] [16418.525679] f2fs_write_checkpoint+0x16d/0x1720 [f2fs] [16418.525699] ? ttwu_do_wakeup+0x1c/0x160 [16418.525709] ? ttwu_do_activate+0x6d/0xd0 [16418.525711] ? __wait_for_common+0x11d/0x150 [16418.525715] kill_f2fs_super+0xca/0x100 [f2fs] [16418.525733] deactivate_locked_super+0x3b/0xb0 [16418.525739] deactivate_super+0x40/0x50 [16418.525741] cleanup_mnt+0x139/0x190 [16418.525747] __cleanup_mnt+0x12/0x20 [16418.525749] task_work_run+0x6d/0xa0 [16418.525765] exit_to_user_mode_prepare+0x1ad/0x1b0 [16418.525771] syscall_exit_to_user_mode+0x27/0x50 [16418.525774] do_syscall_64+0x48/0xc0 [16418.525776] entry_SYSCALL_64_after_hwframe+0x44/0xae | Feb 26, 2025 |
| CVE-2022-49309(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: drivers: staging: rtl8723bs: Fix deadlock in rtw_surveydone_event_callback() There is a deadlock in rtw_surveydone_event_callback(), which is shown below: (Thread 1) | (Thread 2) | _set_timer() rtw_surveydone_event_callback()| mod_timer() spin_lock_bh() //(1) | (wait a time) ... | rtw_scan_timeout_handler() del_timer_sync() | spin_lock_bh() //(2) (wait timer to stop) | ... We hold pmlmepriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need pmlmepriv->lock in position (2) of thread 2. As a result, rtw_surveydone_event_callback() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_bh(), which could let timer handler to obtain the needed lock. What`s more, we change spin_lock_bh() in rtw_scan_timeout_handler() to spin_lock_irq(). Otherwise, spin_lock_bh() will also cause deadlock() in timer handler. | Feb 26, 2025 |
| CVE-2022-49296(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: ceph: fix possible deadlock when holding Fwb to get inline_data 1, mount with wsync. 2, create a file with O_RDWR, and the request was sent to mds.0: ceph_atomic_open()--> ceph_mdsc_do_request(openc) finish_open(file, dentry, ceph_open)--> ceph_open()--> ceph_init_file()--> ceph_init_file_info()--> ceph_uninline_data()--> { ... if (inline_version == 1 || /* initial version, no data */ inline_version == CEPH_INLINE_NONE) goto out_unlock; ... } The inline_version will be 1, which is the initial version for the new create file. And here the ci->i_inline_version will keep with 1, it's buggy. 3, buffer write to the file immediately: ceph_write_iter()--> ceph_get_caps(file, need=Fw, want=Fb, ...); generic_perform_write()--> a_ops->write_begin()--> ceph_write_begin()--> netfs_write_begin()--> netfs_begin_read()--> netfs_rreq_submit_slice()--> netfs_read_from_server()--> rreq->netfs_ops->issue_read()--> ceph_netfs_issue_read()--> { ... if (ci->i_inline_version != CEPH_INLINE_NONE && ceph_netfs_issue_op_inline(subreq)) return; ... } ceph_put_cap_refs(ci, Fwb); The ceph_netfs_issue_op_inline() will send a getattr(Fsr) request to mds.1. 4, then the mds.1 will request the rd lock for CInode::filelock from the auth mds.0, the mds.0 will do the CInode::filelock state transation from excl --> sync, but it need to revoke the Fxwb caps back from the clients. While the kernel client has aleady held the Fwb caps and waiting for the getattr(Fsr). It's deadlock! URL: https://tracker.ceph.com/issues/55377 | Feb 26, 2025 |
| CVE-2022-49295(opens NVD record) | High | 7.0 | In the Linux kernel, the following vulnerability has been resolved: nbd: call genl_unregister_family() first in nbd_cleanup() Otherwise there may be race between module removal and the handling of netlink command, which can lead to the oops as shown below: BUG: kernel NULL pointer dereference, address: 0000000000000098 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 31299 Comm: nbd-client Tainted: G E 5.14.0-rc4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:down_write+0x1a/0x50 Call Trace: start_creating+0x89/0x130 debugfs_create_dir+0x1b/0x130 nbd_start_device+0x13d/0x390 [nbd] nbd_genl_connect+0x42f/0x748 [nbd] genl_family_rcv_msg_doit.isra.0+0xec/0x150 genl_rcv_msg+0xe5/0x1e0 netlink_rcv_skb+0x55/0x100 genl_rcv+0x29/0x40 netlink_unicast+0x1a8/0x250 netlink_sendmsg+0x21b/0x430 ____sys_sendmsg+0x2a4/0x2d0 ___sys_sendmsg+0x81/0xc0 __sys_sendmsg+0x62/0xb0 __x64_sys_sendmsg+0x1f/0x30 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: nbd(E-) | Feb 26, 2025 |
| CVE-2022-49294(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check if modulo is 0 before dividing. [How & Why] If a value of 0 is read, then this will cause a divide-by-0 panic. | Feb 26, 2025 |
| CVE-2022-49292(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ALSA: oss: Fix PCM OSS buffer allocation overflow We've got syzbot reports hitting INT_MAX overflow at vmalloc() allocation that is called from snd_pcm_plug_alloc(). Although we apply the restrictions to input parameters, it's based only on the hw_params of the underlying PCM device. Since the PCM OSS layer allocates a temporary buffer for the data conversion, the size may become unexpectedly large when more channels or higher rates is given; in the reported case, it went over INT_MAX, hence it hits WARN_ON(). This patch is an attempt to avoid such an overflow and an allocation for too large buffers. First off, it adds the limit of 1MB as the upper bound for period bytes. This must be large enough for all use cases, and we really don't want to handle a larger temporary buffer than this size. The size check is performed at two places, where the original period bytes is calculated and where the plugin buffer size is calculated. In addition, the driver uses array_size() and array3_size() for multiplications to catch overflows for the converted period size and buffer bytes. | Feb 26, 2025 |
| CVE-2022-49289(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: uaccess: fix integer overflow on access_ok() Three architectures check the end of a user access against the address limit without taking a possible overflow into account. Passing a negative length or another overflow in here returns success when it should not. Use the most common correct implementation here, which optimizes for a constant 'size' argument, and turns the common case into a single comparison. | Feb 26, 2025 |