Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
43,606 matching · page 485/873Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-63962(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes() svdm_consume_modes() checks pmdata->altmodes against the array size once before the loop over the count, but forgot to check the bound at every point in the loop. In the well-behaved SVDM discovery flow this is harmless because each of at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming ACK with any request the port actually sent. Once port->partner is set, an unsolicited Discover Modes ACK is consumed unconditionally. A broken or malicious port partner can therefore drive altmodes to ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra Discover Modes ACK with seven VDOs. Because the pre-loop check passes, the loop could then writes up to five entries past altmode_desc[]. For mode_data_prime the next field in struct tcpm_port is the partner_altmode[] pointer array, which then receives partner-chosen SVID/VDO bytes. Move the bound check inside the loop so the array can never be indexed past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner supplies or how the function was reached. | Jul 19, 2026 |
| CVE-2026-63961(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: validate count before reading Status Update VDO A broken/malicious device can send the incorrect count for a status update VDO, which will cause the kernel to read uninitialized stack data and send it off elsewhere. Fix this up by correctly verifying the count for the update object. | Jul 19, 2026 |
| CVE-2026-63960(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer() wcove_read_rx_buffer() copies the PD RX FIFO into the caller's struct pd_message with for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++) regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i); which has two problems: USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed). The byte count latched in RXINFO is the number of bytes the port partner put on the wire, so a malicious partner that transmits a 31-byte frame can drive the loop one byte past the destination if the WCOVE BMC receiver does not enforce the PD object-count limit in hardware. The existing FIXME flagged this as unverified. Independently, regmap_read() takes an unsigned int * and stores a full unsigned int at the destination. Passing the byte pointer msg + i means each iteration writes four bytes; the high three are zero (val_bits is 8) and are normally overwritten by the next iteration, but the final iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration already writes three zero bytes past msg, which sits on the IRQ thread's stack in wcove_typec_irq(). Clamp the loop to sizeof(struct pd_message) and read each register into a local before storing only its low byte, so the copy can never exceed the destination regardless of what RXINFO reports. | Jul 19, 2026 |
| CVE-2026-63959(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNT A broken/malicious port can transmit a CRC-valid frame whose header advertises up to seven data objects but whose body carries fewer than that. Check for this, and rightfully reject the message, instead of reading from uninitialized stack memory. | Jul 19, 2026 |
| CVE-2026-63958(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_connector_change() The connector number in a UCSI CCI notification is a 7-bit field supplied by the PPM. ucsi_connector_change() uses it to index the ucsi->connector[] array without checking it against the number of connectors the PPM reported at init time, so a buggy or malicious PPM (EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 / glink transports) can drive schedule_work() on memory past the end of the array. Reject connector numbers that are zero or exceed cap.num_connectors before dereferencing the array. | Jul 19, 2026 |
| CVE-2026-63957(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: USB: serial: safe_serial: fix memory corruption with small endpoint Make sure that the bulk-out buffer size is at least eight bytes to avoid user-controlled slab corruption in "safe" mode should a malicious device report a smaller size. | Jul 19, 2026 |
| CVE-2026-63956(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: fix memory corruption with small endpoint Make sure that the interrupt-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption or NULL-pointer dereference should a malicious device report a smaller size. | Jul 19, 2026 |
| CVE-2026-63955(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: do not trigger BUG() on BH disabled context __get_vm_area_node() currently triggers a BUG() if in_interrupt() returns true. However, in_interrupt() also reports true when BH are disabled. The bridge code can call rhashtable_lookup_insert_fast() with bottom halves disabled: __vlan_add() -> br_fdb_add_local() spin_lock_bh(&br->hash_lock); <-- Disable BH -> fdb_add_local() -> fdb_create() -> rhashtable_lookup_insert_fast() -> kvmalloc() -> vmalloc() -> __get_vm_area_node() -> BUG_ON(in_interrupt()) spin_unlock_bh(&br->hash_lock) this triggers the BUG() despite the caller not being in NMI or hard IRQ context. Replace the in_interrupt() check with in_nmi() || in_hardirq(). | Jul 19, 2026 |
| CVE-2026-63954(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: hpfs: fix a crash if hpfs_map_dnode_bitmap fails If hpfs_map_dnode_bitmap fails, the code would call hpfs_brelse4 on uninitialized quad buffer head, causing a crash. | Jul 19, 2026 |
| CVE-2026-63953(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: fix pgtable leak in migrate_vma_insert_huge_pmd_page When migrate_vma_insert_huge_pmd_page() jumps to unlock_abort due to a PMD check failure, the pgtable allocated earlier via pte_alloc_one() is never freed, causing a memory leak. Added free_abort label to release the pgtable in error path. | Jul 19, 2026 |
| CVE-2026-63952(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: memfd: deny writeable mappings when implying SEAL_WRITE When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the implied seal is set after the check that makes sure the memfd can not have any writable mappings. This means one can use SEAL_EXEC to apply SEAL_WRITE while having writeable mappings. This breaks the contract that SEAL_WRITE provides and can be used by an attacker to pass a memfd that appears to be write sealed but can still be modified arbitrarily. Fix this by adding the implied seals before the call for mapping_deny_writable() is done. | Jul 19, 2026 |
| CVE-2026-63951(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: zram: fix use-after-free in zram_writeback_endio A crash was observed in zram_writeback_endio due to a NULL pointer dereference in wake_up. The root cause is a race condition between the bio completion handler (zram_writeback_endio) and the writeback task. In zram_writeback_endio, wake_up() is called on &wb_ctl->done_wait after releasing wb_ctl->done_lock. This creates a race window where the writeback task can see num_inflight become 0, return, and free wb_ctl before zram_writeback_endio calls wake_up(). CPU 0 (zram_writeback_endio) CPU 1 (writeback_store) ============================ ============================ zram_writeback_slots zram_submit_wb_request zram_submit_wb_request wait_event(wb_ctl->done_wait) spin_lock(&wb_ctl->done_lock); list_add(&req->entry, &wb_ctl->done_reqs); spin_unlock(&wb_ctl->done_lock); wake_up(&wb_ctl->done_wait); zram_complete_done_reqs spin_lock(&wb_ctl->done_lock); list_add(&req->entry, &wb_ctl->done_reqs); spin_unlock(&wb_ctl->done_lock); while (num_inflight) > 0) spin_lock(&wb_ctl->done_lock); list_del(&req->entry); spin_unlock(&wb_ctl->done_lock); // num_inflight becomes 0 atomic_dec(num_inflight); // Leave zram_writeback_slots // Free wb_ctl release_wb_ctl(wb_ctl); // UAF crash! wake_up(&wb_ctl->done_wait); This patch fixes this race by using RCU. By protecting wb_ctl with rcu_read_lock() in zram_writeback_endio and using kfree_rcu() to free it, we ensure that wb_ctl remains valid during the execution of zram_writeback_endio. | Jul 19, 2026 |
| CVE-2026-63950(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one Initialize nr_pages to 1 at the start of each loop iteration, like folio_referenced_one() does. Without this, nr_pages computed by a previous folio_unmap_pte_batch() call can be reused on a later iteration that does not run folio_unmap_pte_batch() again. mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call madvise(MADV_FREE), then make the last page device-exclusive via HMM_DMIRROR_EXCLUSIVE. Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will first clear the first 15 out of 16 entries mapping the lazyfree folio. This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets reused on a device-exclusive pte, thus potentially corrupting folio refcount/mapcount. At the moment, I have a userspace program which can make the kernel spit out a trace, but the blow up is in folio_referenced_one(), because there are existing bugs in the interaction between device-private and rmap (which too I am investigating). I did a one liner kernel change to avoid going into folio_referenced_one(), and the kernel blows up at folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted. Note that the bug is there not since file folio batching but lazyfree folio batching, since device-exclusive only works for anonymous folios. Userspace visible effect is simply kernel crashing somewhere due to refcount/mapcount corruption. | Jul 19, 2026 |
| CVE-2026-63949(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: auxdisplay: line-display: fix OOB read on zero-length message_store() linedisp_display() unconditionally reads msg[count - 1] before checking whether count is zero, so a write of zero bytes to the message sysfs attribute hits msg[-1]: write(fd, "", 0); -> message_store(..., buf, count=0) -> linedisp_display(linedisp, buf, count=0) -> msg[count - 1] == '\n' ; OOB read The kernfs write buffer for that store is a 1-byte allocation (kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0), so msg[-1] is a 1-byte read before the slab object. On a KASAN-enabled kernel this trips an out-of-bounds report and panics; on stock kernels it silently reads adjacent slab data and, if that byte happens to be '\n', the following count-- wraps ssize_t 0 to -1 and is then passed to kmemdup_nul(). linedisp_display() is reached from the message_store() sysfs callback (drivers/auxdisplay/line-display.c message attribute, mode 0644) and from the in-tree initial-message setup with count == -1, so the OOB path is only userspace-triggerable via zero-byte writes; vfs_write() does not short-circuit on count == 0 and kernfs_fop_write_iter() dispatches the store callback regardless. Guard the trailing-newline trim with a count check. The existing if (!count) block then takes the clear-display path unchanged. Affects every auxdisplay driver that registers via linedisp_register() / linedisp_attach(): ht16k33, max6959, img-ascii-lcd, seg-led-gpio. | Jul 19, 2026 |
| CVE-2026-63948(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn __set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold() before scheduling the delayed work. The normal path in l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the end, but the early return when chan->conn is NULL skips the put, leaking the reference. Add the missing l2cap_chan_put() before the early return. | Jul 19, 2026 |
| CVE-2026-63947(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: fix missing length checks in hidp_input_report() hidp_input_report() reads keyboard and mouse payload data from an skb without first verifying that skb->len contains enough data. hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching to hidp_input_report(). If a paired device sends a truncated packet, the handler reads beyond the valid skb data, resulting in an out-of-bounds read of skb data. The OOB bytes may be interpreted as phantom key presses or spurious mouse movement. Replace the open-coded length tracking and pointer arithmetic with skb_pull_data() calls. skb_pull_data() returns NULL if the requested bytes are not present, eliminating the need for a manual size variable and the separate skb->len guard. | Jul 19, 2026 |
| CVE-2026-63946(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix UAF in iso_recv_frame iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock before using sk, with no reference held. A concurrent iso_sock_kill() can free sk in that window, causing use-after-free on sk->sk_state and sock_queue_rcv_skb(). Fix by replacing the bare pointer read with iso_sock_hold(conn), which calls sock_hold() while the spinlock is held, atomically elevating the refcount before the lock drops. Add a drop_put label so sock_put() is called on all exit paths where the hold succeeded. | Jul 19, 2026 |
| CVE-2026-63945(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock iso_sock_close() calls iso_sock_clear_timer() before acquiring lock_sock(sk). iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the socket lock held: if (!iso_pi(sk)->conn) return; cancel_delayed_work(&iso_pi(sk)->conn->timeout_work); Concurrently, iso_conn_del() executes under lock_sock(sk) and calls iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in the final reference to the connection being dropped: CPU0 CPU1 ---- ---- iso_sock_clear_timer() if (conn != NULL) ... lock_sock(sk) iso_chan_del() iso_pi(sk)->conn = NULL cancel_delayed_work(conn) /* NULL deref or UAF */ iso_pi(sk)->conn is not stable across the unlock window, causing a NULL pointer dereference or use-after-free. Serialize iso_sock_clear_timer() with the socket lock by moving it inside lock_sock()/release_sock(), matching the pattern used in iso_conn_del() and all other call sites. | Jul 19, 2026 |
| CVE-2026-63944(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was obtained from an RCU-protected iteration over hdev->conn_hash.list and is not valid once these locks are dropped. A concurrent disconnect can free the hci_conn between the unlock and the dereference, causing a use-after-free read. The cancellation mechanism in hci_conn_del() cannot prevent this because hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL: hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL); While hci_conn_del() dequeues with data=conn: hci_cmd_sync_dequeue(hdev, NULL, conn, NULL); Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never matches, and the pending work item is not cancelled. Fix this by saving conn->conn_timeout into a local variable while the locks are still held, so the stale conn pointer is never dereferenced after unlock. This is the same class of bug as the one fixed by commit 035c25007c9e ("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which addressed the identical pattern in a different function. This vulnerability was identified using 0sec.ai, an open-source automated security auditing platform (https://github.com/0sec-labs). | Jul 19, 2026 |
| CVE-2026-63943(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: Input: xpad - fix out-of-bounds access for Share button xpadone_process_packet() receives len directly from urb->actual_length and uses it to index the share-button byte at data[len - 18] or data[len - 26]. Since both len and data[0] are under the device's control, a broken controller can send a GIP_CMD_INPUT packet with actual_length < 18 (e.g. 5 bytes) and reach this code path, causing accesses beyond the actual array. Fix this by calculating the offset and checking bounds against the packet length. | Jul 19, 2026 |
| CVE-2026-63942(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: parport: Fix race between port and client registration The parport subsystem registers port devices before they are fully initialised, resulting in a race condition where client drivers such as lp can attach to ports that are not completely initialised or even being torn down. When the port and client drivers are built as modules and loaded around the same time during boot, this occasionally results in a crash. I was able to make this happen reliably in a VM with a PC-style parallel port by patching parport_pc to fail probing: > --- a/drivers/parport/parport_pc.c > +++ b/drivers/parport/parport_pc.c > @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base, > if (!p) > goto out3; > > - base_res = request_region(base, 3, p->name); > + base_res = NULL; > if (!base_res) > goto out4; > and then running: while true; do modprobe lp & modprobe parport_pc wait rmmod lp parport_pc done for a few seconds. In the long term I think port registration should be changed to put the call to device_add() inside parport_announce_port(), but since the latter currently cannot fail this will require changing all port drivers. For now, add a flag to indicate whether a port has been "announced" and only try to attach client drivers to ports when the flag is set. | Jul 19, 2026 |
| CVE-2026-63941(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor ZCR_EL2 can be updated by a VHE guest hypervisor either using ZCR_EL2 (which traps) or ZCR_EL1 (which does not trap). KVM handles both in different way: - on ZCR_EL2 trap, ZCR_EL2.LEN is immediately capped at the VM's own VL limit. This has the potential to break existing SW that relies on the full LEN field to be stateful. - on ZCR_EL1 access, we do absolutely nothing. On restoring the SVE context for an L2 guest, we directly restore the guest hypervisor's view of ZCR_EL2 into the physical ZCR_EL2. If the guest's view of the register was updated using the ZCR_EL2 accessor, the value has already been sanitised (with the caveat mentioned above). But if the guest used ZCR_EL1, the raw value is written into the HW, and the L2 guest can now access VLs that it shouldn't. Fix all the above by moving the VL capping to the restore points, ensuring that: - the HW is always programmed with a capped value, irrespective of the accessor being used, - the ZCR_EL2.LEN field is always completely stateful, irrespective of the accessor being used. Additionally, move ZCR_EL2 to be a sanitised register, ensuring that only the LEN field is actually stateful. This requires some creative construction of the RES0 mask, as the sysreg generation script does not yet generate RAZ/WI fields. [maz: rewrote commit message, tidy up access_zcr_el2()] | Jul 19, 2026 |
| CVE-2026-63940(opens NVD record) | Critical | 9.3 | In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Ignore Port I/O requests of length '0' Explicitly ignore Port I/O requests of length '0' (or count '0'), so that setting up the software scratch area (and other code) doesn't have to worry about underflowing the length, and to allow for WARNing on trying to configure the scratch area with len==0. | Jul 19, 2026 |
| CVE-2026-63939(opens NVD record) | Critical | 9.3 | In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Compute the correct max length of the in-GHCB scratch area When setting the length of the GHCB scratch area, and the area is in the GHCB shared buffer, set the effective length of the scratch area to the max possible size given the start of the guest-provided pointer, and the end of the shared buffer. The code was "fine" when first introduced, as KVM doesn't consult the length of the buffer when emulating MMIO, because the passed in @len always specifies the *max* size required. But for PSC requests, the incoming @len is just the minimum length (to process the header), and KVM needs to know the full size of the scratch area to avoid buffer overflows (spoiler alert). Opportunistically rename @len => @min_len to better reflect its role. | Jul 19, 2026 |
| CVE-2026-63938(opens NVD record) | Critical | 9.3 | In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Check PSC request indices against the actual size of the buffer When processing Page State Change (PSC) requests, validate the PSC buffer against the effective size of the scratch area, which could be less than the maximum size if the guest provided a pointer that isn't exactly at the start of the GHCB shared buffer. | Jul 19, 2026 |
| CVE-2026-63937(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Use READ_ONCE() when reading entries/indices from PSC buffer Use READ_ONCE() when reading entries/indices from the guest-accessible Page State Change buffer to defend against TOCTOU bugs. Don't bother with READ_ONCE()/WRITE_ONCE() for cases where KVM is writing (and not consuming the result!), as the guest isn't supposed to touch the buffer while it's being processed. I.e. using READ_ONCE() is all about protecting against misbehaving guests. | Jul 19, 2026 |
| CVE-2026-63936(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: iio: adc: mt6359: fix unchecked return value in mt6358_read_imp In mt6358_read_imp(), the variable val_v is passed to regmap_read() but the return value is not checked. If the read fails, val_v remains uninitialized and its random stack content is subsequently reported as a measurement result. Initialize val_v to zero to ensure a predictable value is reported in case of bus failure and to prevent potential stack data leakage. This also satisfies static analyzers that might otherwise flag the variable as used uninitialized. | Jul 19, 2026 |
| CVE-2026-63935(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: iio: adc: nxp-sar-adc: fix division by zero in write_raw Add a validation check for the sampling frequency value before using it as a divisor. A user writing zero or a negative value to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. Also prevent unsigned integer underflow when the computed cycle count is smaller than NXP_SAR_ADC_CONV_TIME, which would wrap the u32 inpsamp to a huge value. | Jul 19, 2026 |
| CVE-2026-63934(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: iio: gyro: itg3200: fix i2c read into the wrong stack location itg3200_read_all_channels() takes `__be16 *buf' as a parameter and fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the parameter (a pointer), `&buf' is the address of the local pointer slot on the stack of itg3200_read_all_channels(), not the address of the caller's scan buffer. The (char *) cast hides the type mismatch. i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16) = 8 bytes into the parameter's stack slot, which is discarded when the function returns. The caller's scan buffer in itg3200_trigger_handler() is never written to, so iio_push_to_buffers_with_timestamp() pushes uninitialised stack contents to userspace via /dev/iio:deviceX every scan -- both a functional bug (no actual gyroscope or temperature data is delivered through the triggered buffer) and an information leak. The non-buffered read_raw() path is unaffected: it goes through itg3200_read_reg_s16() which uses `&out' on a local s16 value, where that is correct. Drop the spurious `&' so the i2c read writes into the caller's buffer. | Jul 19, 2026 |
| CVE-2026-63933(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: iio: gyro: adis16260: fix division by zero in write_raw Add a validation check for the sampling frequency value before using it as a divisor. A user writing zero to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. | Jul 19, 2026 |
| CVE-2026-63932(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: iio: chemical: mhz19b: reject oversized serial replies mhz19b_receive_buf() appends each serdev chunk into the fixed MHZ19B_CMD_SIZE receive buffer and advances buf_idx by len without checking that the chunk fits in the remaining space. A large callback can therefore overflow st->buf before the command path validates the reply. Reset the reply state before each command and reject oversized serial replies before copying them into the fixed buffer. When an oversized reply is detected, wake the waiter and report -EMSGSIZE instead of overwriting st->buf. | Jul 19, 2026 |
| CVE-2026-63931(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: iio: chemical: scd30: fix division by zero in write_raw Add a zero check for val2 before using it as a divisor when setting the sampling frequency. A user writing a zero fractional part to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. | Jul 19, 2026 |
| CVE-2026-63930(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: iio: buffer: hw-consumer: fix use-after-free in error path In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code was using list_for_each_entry() to iterate through buffers while calling iio_buffer_put() which can free the current buffer if refcount drops to 0. The list_for_each_entry() loop macro then evaluates buf->head.next to continue iteration, accessing the freed buffer. Fix this by using list_for_each_entry_safe(). | Jul 19, 2026 |
| CVE-2026-63929(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix DMA fence leak in iio_buffer_enqueue_dmabuf() iio_buffer_enqueue_dmabuf() allocates a struct iio_dma_fence (104 bytes, kmalloc-128) via kmalloc_obj()+dma_fence_init(), which sets the initial kref to 1. It then calls dma_resv_add_fence() which takes a second reference (kref=2), and stores a raw pointer in block->fence. On the success path the function returns without calling dma_fence_put() to release the initial reference, so every buffer enqueue permanently leaks one kmalloc-128 allocation. The iio_buffer_cleanup() work item only releases the temporary reference taken during completion signalling by iio_buffer_signal_dmabuf_done(); the initial reference from dma_fence_init() is never released. With four iio_rwdev instances at 240kHz and 512 samples per buffer, this produces ~1875 kmalloc-128 allocations per second matching the observed slab growth exactly. A test with ftrace confirmed that the dma_fence_destroy event was never triggered. Fix by calling dma_fence_put() after dma_resv_add_fence(), transferring ownership of the fence to the DMA reservation object. The DMA fence then gets properly discarded after being signalled. | Jul 19, 2026 |
| CVE-2026-63928(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: USB: serial: omninet: fix memory corruption with small endpoint Make sure that the bulk-out buffers are at least as large as the hardcoded transfer size to avoid user-controlled slab corruption should a malicious device report a smaller endpoint max packet size than expected. | Jul 19, 2026 |
| CVE-2026-63927(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: Fix use after free in debug code We're not allowed to dereference "urb" after calling usb_hcd_giveback_urb() so save the urb->status ahead of time. | Jul 19, 2026 |
| CVE-2026-63926(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: bpf: sockmap: fix tail fragment offset in bpf_msg_push_data When bpf_msg_push_data() inserts data in the middle of a scatterlist entry, it splits the original entry into a left fragment and a right fragment. The right fragment offset is page-local, but the code advances it with `start`, which is the message-global insertion point. For inserts into a non-first SG entry, this over-advances the offset and leaves the split layout inconsistent. Advance the right fragment offset by the fragment-local delta, `start - offset`, which matches the length removed from the front of the original entry. | Jul 19, 2026 |
| CVE-2026-63925(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: macsec: fix replay protection at XPN lower-PN wrap In macsec_post_decrypt(), when pn is U32_MAX, pn + 1 overflows u32 to 0 and the first branch never fires. If next_pn_halves.lower is also in the upper half, pn_same_half(pn, lower) is true and the XPN else-if does not fire either, leaving next_pn_halves unchanged. An attacker that captures the legitimate frame carrying pn == 0xFFFFFFFF on an XPN association can then replay it indefinitely, since lowest_pn never rises above the captured pn and macsec_decrypt() reconstructs the same IV. Extend the XPN else-if to also fire when pn + 1 wraps to 0, so receipt of pn == U32_MAX advances next_pn_halves to (upper + 1, 0). | Jul 19, 2026 |
| CVE-2026-63924(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo() ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers. Let's recompute nh pointer to make sure any change won't mess things up. | Jul 19, 2026 |
| CVE-2026-63923(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: validate body pcifunc in rvu_mbox_handler_rep_event_notify rvu_mbox_handler_rep_event_notify() in drivers/net/ethernet/marvell/ octeontx2/af/rvu_rep.c queues a sender-controlled REP_EVENT_NOTIFY request body verbatim, and rvu_rep_up_notify() then forwards event->pcifunc (the nested body field, distinct from the AF-normalised header pcifunc) into rvu_get_pfvf(), rvu_get_pf() and the AF->PF mailbox device index without any bounds check. A VF attached to a PF that has been put into switchdev representor mode reaches this path: the VF mailbox handler otx2_pfvf_mbox_handler() forwards every message id including MBOX_MSG_REP_EVENT_NOTIFY to AF without an allowlist, and the AF dispatcher rewrites only msg->pcifunc, leaving struct rep_event::pcifunc attacker-controlled. The sibling rvu_mbox_handler_esw_cfg() refuses requests whose header pcifunc is not rvu->rep_pcifunc; this handler has no equivalent gate. An out-of-range body pcifunc selects an &rvu->pf[]/&rvu->hwvf[] element past the allocated array and, for RVU_EVENT_MAC_ADDR_CHANGE, turns into a six-byte attacker-chosen OOB ether_addr_copy() target inside the queued worker; KASAN reports a slab-out-of-bounds write in rvu_rep_wq_handler. Reject malformed requests at the handler entry by gating on is_pf_func_valid(), which is already the canonical PF/VF range check in this driver; expose it via rvu.h so callers in rvu_rep.c can use it instead of open-coding the same range arithmetic. | Jul 19, 2026 |
| CVE-2026-63922(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh after handling HAO option ip6_parse_tlv() caches skb_network_header(skb) in nh while walking IPv6 TLVs. ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can move the skb head and invalidate the cached network header pointer. Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs are parsed from the current skb head. This matches the existing pattern used in ip6_parse_tlv() after helpers that can modify skb header storage. | Jul 19, 2026 |
| CVE-2026-63921(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate(). After patch 1/2 in this series, vti6_update() unlinks and relinks the tunnel through t->net. vti6_siocdevprivate() still uses dev_net(dev) for the collision lookup. For a tunnel moved through IFLA_NET_NS_FD, dev_net(dev) is the new netns, not t->net. SIOCCHGTUNNEL on a migrated tunnel then runs: net = dev_net(dev) /* migrated netns */ t = vti6_locate(net, &p1, false) /* misses target in t->net */ ... t = netdev_priv(dev) vti6_update(t, &p1, false) /* mutates t->net's hash */ A caller in the migrated netns picks params that match a tunnel in the creation netns. The lookup in dev_net(dev) finds nothing. vti6_update() prepends the migrated tunnel at the head of the creation netns hash bucket for those params. Later lookups in the creation netns resolve to the migrated device. xfrm receive delivers the matched packets through a device the caller controls. Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). Cross tenant scope on container hosts. Switch the SIOCCHGTUNNEL path on a non fallback device to use t->net for the lookup. The lookup now matches the netns vti6_update() operates on. Also add ns_capable(self->net->user_ns, CAP_NET_ADMIN) before the lookup. The check at the top of the case is against dev_net(dev)->user_ns, which after migration is the attacker's netns. A caller there can pick params absent from self->net, the lookup returns NULL, t becomes self, and vti6_update() inserts the device into the creation netns hash. The new check requires CAP_NET_ADMIN in the creation netns user_ns too. SIOCADDTUNNEL and SIOCCHGTUNNEL on the fallback device keep dev_net(dev), which equals init_net there. | Jul 19, 2026 |
| CVE-2026-63920(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: ipv6: validate extension header length before copying to cmsg ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR} cmsgs (and their IPV6_2292* legacy counterparts) by trusting the on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length. The length was validated only at parse time (ipv6_parse_hopopts(), etc.). An nftables payload-write expression can rewrite hdrlen after parsing and before the skb reaches recvmsg; the write itself is in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040 bytes from an 8-byte header. nftables is reachable from an unprivileged user namespace, so this is an unprivileged slab-out-of-bounds read: BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540 put_cmsg+0x3ac/0x540 udpv6_recvmsg+0xca0/0x1250 sock_recvmsg+0xdf/0x190 ____sys_recvmsg+0x1b1/0x620 Add ipv6_get_exthdr_len() which validates that at least two bytes are accessible before reading the hdrlen field, then checks the computed length against skb_tail_pointer(skb), returning 0 on failure. Extension headers are kept in the linear skb area by pskb_may_pull() during input, so skb_tail_pointer() is the correct bound. Use ipv6_get_exthdr_len() at all non-AH call sites: the five standalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR) and the three standard cases in the extension-header walk loop (DSTOPTS, ROUTING, default). AH retains an inline bounds check because its length formula differs ((ptr[1]+2)<<2). The walk loop also gets a pre-read bounds check at the top to validate ptr before any case accesses ptr[0] or ptr[1]. When the walk loop detects a corrupted header, return from the function instead of continuing to process later socket options. | Jul 19, 2026 |
| CVE-2026-63919(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: xfrm: input: hold netns during deferred transport reinjection Transport-mode reinjection stores a struct net pointer in skb->cb and uses it later from xfrm_trans_reinject(). That pointer must stay valid until the deferred callback runs. Take a netns reference when queueing deferred reinjection work and drop it after the callback completes. Use maybe_get_net() so the queueing path does not revive a namespace that is already being torn down. This keeps the existing workqueue design and fixes the netns lifetime handling in one place for all users of xfrm_trans_queue_net(). | Jul 19, 2026 |
| CVE-2026-63918(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: l2tp: use refcount_inc_not_zero in l2tp_session_get_by_ifname A reader in l2tp_session_get_by_ifname() can return a pointer to a session whose refcount has reached zero. The getter takes its reference with plain refcount_inc(), but every other session getter in the same file (l2tp_v2_session_get, l2tp_v3_session_get, and the corresponding _get_next variants) uses refcount_inc_not_zero() because the IDR/RCU lookup can race with refcount_dec_and_test() -> l2tp_session_free() -> kfree_rcu(). The ifname getter is the only outlier; the inconsistency was raised on-list after 979c017803c4 ("l2tp: use list_del_rcu in l2tp_session_unhash"). A reader inside rcu_read_lock_bh() that matches session->ifname can be preempted between the strcmp() and the refcount_inc(). If the last reference drops on another CPU in that window, the reader's refcount_inc() runs on a counter that has reached zero. refcount_t catches the addition-on-zero, prints "refcount_t: addition on 0; use-after-free", saturates the counter, and returns the saturated pointer to the caller. Session memory is held live by the in-flight RCU read section, but the kfree_rcu() callback queued from l2tp_session_free() will free it once the grace period closes; a caller that dereferences the returned session past that point hits a slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPU sleeping lock and the preemption window is real; on stock PREEMPT kernels local_bh_disable() is a preempt_count increment that closes the cross-CPU race in practice (see below). Use refcount_inc_not_zero() and continue the list walk on failure, matching the other session getters in the file. The ifname getter is the only session getter in net/l2tp/ that still uses the bare refcount_inc() pattern; this change restores file-internal consistency. The success path is unchanged. | Jul 19, 2026 |
| CVE-2026-63917(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: ip6: vti: Use ip6_tnl.net in vti6_changelink(). ip netns add ns1 ip netns add ns2 ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7 ip -n ns1 link set vti6_test netns ns2 ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9 ip netns del ns2 ip netns del ns1 [ 132.495484] ------------[ cut here ]------------ [ 132.497609] kernel BUG at net/core/dev.c:12376! Commit 61220ab34948 ("vti6: Enable namespace changing") dropped NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then move through IFLA_NET_NS_FD. After the move dev_net(dev) points at the new netns while t->net stays at the creation netns. vti6_changelink() and vti6_update() still use dev_net(dev) and dev_net(t->dev). They unlink from one per netns hash and relink into another. The creation netns is left with a stale entry. cleanup_net() of that netns later walks freed memory. Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). Cross tenant scope on container hosts. | Jul 19, 2026 |
| CVE-2026-63916(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix OOB write in wacom_hid_set_device_mode() wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE usage is always located in the first field (field[0]) of the feature report. However, a device can specify HID_DG_INPUTMODE in a different field. If HID_DG_INPUTMODE is in a field other than the first one and the first field has a report_count smaller than the usage_index of HID_DG_INPUTMODE, this leads to an out-of-bounds write to r->field[0]->value. Fix this by storing the field index of HID_DG_INPUTMODE in 'struct hid_data' during feature mapping. In wacom_hid_set_device_mode(), use this stored field index to access the correct field and add bounds checks to ensure both the field index and the value index are within valid ranges before writing. | Jul 19, 2026 |
| CVE-2026-63915(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: nfc: hci: fix out-of-bounds read in HCP header parsing Both nfc_hci_recv_from_llc() and nci_hci_data_received_cb() read packet->header from skb->data at function entry without first checking that the buffer holds at least one byte. A malicious NFC peer can send a 0-byte HCP frame that passes through the SHDLC layer and reaches these functions, causing an out-of-bounds heap read of packet->header. The same 0-byte frame, if queued as a non-final fragment, also causes the reassembly loop to underflow msg_len to UINT_MAX, triggering skb_over_panic() when the reassembled skb is written. Fix this by adding a pskb_may_pull() check at the entry of each function before packet->header is first accessed. The existing pskb_may_pull() checks before the reassembled hcp_skb is cast to struct hcp_packet remain in place to guard the 2-byte HCP message header. | Jul 19, 2026 |
| CVE-2026-63914(opens NVD record) | High | 7.3 | In the Linux kernel, the following vulnerability has been resolved: xfrm: route MIGRATE notifications to caller's netns xfrm_send_migrate() in net/xfrm/xfrm_user.c and pfkey_send_migrate() in net/key/af_key.c both hardcode &init_net for the multicast that announces a successful XFRM_MSG_MIGRATE / SADB_X_MIGRATE. XFRM_MSG_MIGRATE arrives on a per-netns NETLINK_XFRM socket, and the rest of the xfrm/af_key netlink path was made netns-aware in 2008. The other 14 multicast paths in xfrm_user.c route their event using xs_net(x), xp_net(xp) or sock_net(skb->sk); only the migrate path was missed. Two consequences of the init_net hardcoding: 1. The notification (selector, old/new endpoint addresses, and the km_address) is delivered to listeners on init_net's XFRMNLGRP_MIGRATE / pfkey BROADCAST_ALL groups rather than on the issuing netns. An IKE daemon running in init_net therefore receives migration notifications originating from any other netns on the host. 2. An IKE daemon running inside a non-init netns and subscribed to its own XFRMNLGRP_MIGRATE / pfkey groups never receives the notification of its own migration. IKEv2 MOBIKE / address-update handling inside a netns is silently broken. Thread struct net through km_migrate() and the xfrm_mgr.migrate function pointer, drop the &init_net override in xfrm_send_migrate() and pfkey_send_migrate(), and pass the caller's net (already in scope in xfrm_migrate() via sock_net(skb->sk)) all the way down. struct xfrm_mgr is in-tree only and not exported as a stable API, so the function-pointer signature change is internal. pfkey_broadcast() is already netns-aware via net_generic(net, pfkey_net_id) since the pernet conversion. The five other pfkey_broadcast() callers in af_key.c already pass xs_net(x), sock_net(sk) or a per-netns net, so this only removes the &init_net outlier. | Jul 19, 2026 |
| CVE-2026-63913(opens NVD record) | High | 8.2 | In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction check An unintended behavior in the TCP conntrack state machine allows a connection to be forced into the CLOSE state using an RST packet with an invalid sequence number. Specifically, after a SYN packet is observed, an RST with an invalid SEQ can transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless of whether the RST corresponds to the expected reply direction. The relevant code path assumes the RST is a response to an outgoing SYN, but does not validate packet direction or ensure that a matching SYN was actually sent in the opposite direction. As a result, a crafted packet sequence consisting of a SYN followed by an invalid-sequence RST can prematurely terminate an active NAT entry. This makes connection teardown easier than intended. So, tighten the state transition logic to ensure that RST-triggered CLOSE transitions only occur when the RST is a valid response to a previously observed SYN in the correct direction. | Jul 19, 2026 |