Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
42,806 matching · page 467/857Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-64078(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: add and use xtables_unregister_table_exit Previous change added xtables_unregister_table_pre_exit to detach the table from the packetpath and to unlink it from the active table list. In case of rmmod, userspace that is doing set/getsockopt for this table will not be able to re-instantiate the table: 1. The larval table has been removed already 2. existing instantiated table is no longer on the xt pernet table list. This adds the second stage helper: unlink the table from the dying list, free the hook ops (if any) and do the audit notification. It replaces xt_unregister_table(). | Jul 19, 2026 |
| CVE-2026-64077(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: move to two-stage removal scheme Like previous patches for x_tables, follow same pattern in ebtables. We can't reuse xt helpers: ebt_table struct layout is incompatible. table->ops assignment is now done while still holding the ebt mutex to make sure we never expose partially-filled table struct. | Jul 19, 2026 |
| CVE-2026-64076(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: eb_tables: close module init race sashiko reports for unrelated patch: Does the core ebtables initialization in ebtables.c suffer from a similar race? Once nf_register_sockopt() completes, the sockopts are exposed globally. sockopt has to be registered last, just like in ip/ip6/arptables. | Jul 19, 2026 |
| CVE-2026-64075(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: fprobe: Fix unregister_fprobe() to wait for RCU grace period Commit 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer") changed fprobe to register struct fprobe to an rcu-hlist, but it forgot to wait for RCU GP. Thus there can be use-after-free if the fprobe is released right after unregistering. This can be happened on fprobe event and sample module code. To fix this issue, add synchronize_rcu() in unregister_fprobe(). Note that BPF is OK because fprobe is used as a part of bpf_kprobe_multi_link. This unregisters its fprobe in bpf_kprobe_multi_link_release() and it is deallocated via bpf_kprobe_multi_link_dealloc(), which is invoked from bpf_link_defer_dealloc_rcu_gp() RCU callback. For BPF, this also introduced unregister_fprobe_async() which does NOT wait for RCU grace priod. | Jul 19, 2026 |
| CVE-2026-64074(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: fs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap statmount_mnt_idmap() writes one mapping with seq_printf() and then manually advances seq->count to include the NUL separator. If seq_printf() overflows, seq_set_overflow() sets seq->count to seq->size. The manual seq->count++ changes this to seq->size + 1. seq_has_overflowed() then no longer detects the overflow. The corrupted count returns to statmount_string(), which later executes: seq->buf[seq->count++] = '\0'; This causes a 1-byte NULL out-of-bounds write on the dynamically allocated seq buffer. Fix this by checking for overflow immediately after seq_printf(). | Jul 19, 2026 |
| CVE-2026-64073(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0. After irq_work_single() clears BUSY via atomic_cmpxchg(), it still dereferences @work for irq_work_is_hard() and rcuwait_wake_up(). An irq_work_sync() caller on another CPU that enters after BUSY is cleared can observe BUSY==0 immediately, return, and free the work before those accesses complete — causing a use-after-free. Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire irq_work_single() execution is within an RCU read-side critical section. Then add synchronize_rcu() in irq_work_sync() after rcuwait_wait_event() to ensure the caller waits for the RCU grace period before returning, preventing premature frees. | Jul 19, 2026 |
| CVE-2026-64072(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: nvme: fix bio leak on mapping failure The local bio is always NULL, so we'd leak the bio if the integrity mapping failed. Just get it directly from the request. | Jul 19, 2026 |
| CVE-2026-64071(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix use-after-free in nvme_free_host_mem() nvme_free_host_mem() frees dev->hmb_sgt via dma_free_noncontiguous() but never clears the pointer afterward. This leads to a use-after-free if nvme_free_host_mem() is called twice in the same error path. This can happen during nvme_probe() when nvme_setup_host_mem() succeeds in allocating the HMB (setting dev->hmb_sgt) but nvme_set_host_mem() fails with an I/O error: nvme_setup_host_mem() nvme_alloc_host_mem_single() -> sets dev->hmb_sgt nvme_set_host_mem() -> fails with -EIO nvme_free_host_mem() -> frees hmb_sgt, but does NOT NULL it return error nvme_probe() error path: nvme_free_host_mem() -> dev->hmb_sgt is stale, use-after-free The second call dereferences the freed sgt, causing a NULL pointer dereference in iommu_dma_free_noncontiguous() when it accesses sgt->sgl->dma_address (the backing memory has been freed and zeroed). This is reproducible on Thunderbolt-attached NVMe devices (e.g., OWC Envoy Express behind a Dell WD22TB4 dock) where the device intermittently returns I/O errors during HMB setup due to PCIe link instability. BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:iommu_dma_free_noncontiguous+0x22/0x80 Call Trace: <TASK> dma_free_noncontiguous+0x3b/0x130 nvme_free_host_mem+0x30/0xf0 [nvme] nvme_probe.cold+0xcc/0x275 [nvme] local_pci_probe+0x43/0xa0 pci_device_probe+0xeea/0x290 really_probe+0xf9/0x3b0 __driver_probe_device+0x8b/0x170 driver_probe_device+0x24/0xd0 __driver_attach_async_helper+0x6b/0x110 async_run_entry_fn+0x37/0x170 process_one_work+0x1ac/0x3d0 worker_thread+0x1b8/0x360 kthread+0xf7/0x130 ret_from_fork+0x2d8/0x3a0 ret_from_fork_asm+0x1a/0x30 </TASK> Fix this by setting dev->hmb_sgt to NULL after freeing it, so the second call takes the multi-descriptor path which safely handles the already-cleaned-up state. | Jul 19, 2026 |
| CVE-2026-64070(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: powerpc/hv-gpci: fix preempt count leak in sysfs show paths Four sysfs show() callbacks in hv-gpci take get_cpu_var(hv_gpci_reqb) (which calls preempt_disable()) but only call the matching put_cpu_var() on the error path under the 'out:' label. Every successful read leaks one preempt_disable(): processor_bus_topology_show() processor_config_show() affinity_domain_via_virtual_processor_show() affinity_domain_via_domain_show() (affinity_domain_via_partition_show() was already correct.) On a CONFIG_PREEMPT=y kernel, repeated reads raise preempt_count and eventually return to userspace with preemption still disabled. The next user-mode page fault then hits faulthandler_disabled() == 1, gets forced to SIGSEGV, and the resulting coredump trips 'BUG: scheduling while atomic' in call_usermodehelper_exec -> wait_for_completion_state -> schedule: BUG: scheduling while atomic: <task>/<pid>/0x00000004 ... __schedule_bug+0x6c/0x90 __schedule+0x58c/0x13a0 schedule+0x48/0x1a0 schedule_timeout+0x104/0x170 wait_for_completion_state+0x16c/0x330 call_usermodehelper_exec+0x254/0x2d0 vfs_coredump+0x1050/0x2590 get_signal+0xb9c/0xc80 do_notify_resume+0xf8/0x470 Add an out_success label that calls put_cpu_var() before returning the byte count, mirroring affinity_domain_via_partition_show(). | Jul 19, 2026 |
| CVE-2026-64069(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix cancellation of a DIO and single read subrequests When the preparation of a new subrequest for a read fails, if the subrequest has already been added to the stream->subrequests list, it can't simply be put and abandoned as the collector may see it. Also, if it hasn't been queued yet, it has two outstanding refs that both need to be put. Both DIO read and single-read dispatch fail at this; further, both differ in the order they do things to the way buffered read works. Fix cancellation of both DIO-read and single-read subrequests that failed preparation by the following steps: (1) Harmonise all three reads (buffered, dio, single) to queue the subreq before prepping it. (2) Make all three call netfs_queue_read() to do the queuing. (3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't know the length of the subreq at this point. (4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq and then call netfs_read_subreq_terminated() to deal with it. This will pass responsibility off to the collector for dealing with it. | Jul 19, 2026 |
| CVE-2026-64068(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing locking around retry adding new subreqs Fix netfs_retry_read_subrequests() and netfs_retry_write_stream() to take the appropriate lock when adding extra subrequests into stream->subrequests. | Jul 19, 2026 |
| CVE-2026-64067(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing barriers when accessing stream->subrequests locklessly The list of subrequests attached to stream->subrequests is accessed without locks by netfs_collect_read_results() and netfs_collect_write_results(), and then they access subreq->flags without taking a barrier after getting the subreq pointer from the list. Relatedly, the functions that build the list don't use any sort of write barrier when constructing the list to make sure that the NETFS_SREQ_IN_PROGRESS flag is perceived to be set first if no lock is taken. Fix this by: (1) Add a new list_add_tail_release() function that uses a release barrier to set the pointer to the new member of the list. (2) Add a new list_first_entry_or_null_acquire() function that uses an acquire barrier to read the pointer to the first member in a list (or return NULL). (3) Use list_add_tail_release() when adding a subreq to ->subrequests. (4) Use list_first_entry_or_null_acquire() when initially accessing the front of the list (when an item is removed, the pointer to the new front iterm is obtained under the same lock). | Jul 19, 2026 |
| CVE-2026-64066(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_read_to_pagecache() to pause on subreq failure Fix netfs_read_to_pagecache() so that it pauses the generation of new subrequests if an already-issued subrequest fails. | Jul 19, 2026 |
| CVE-2026-64065(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: netfs: fix VM_BUG_ON_FOLIO() issue in netfs_write_begin() call The multiple runs of generic/013 test-case is capable to reproduce a kernel BUG at mm/filemap.c:1504 with probability of 30%. while true; do sudo ./check generic/013 done [ 9849.452376] page: refcount:3 mapcount:0 mapping:00000000e58ff252 index:0x10781 pfn:0x1c322 [ 9849.452412] memcg:ffff8881a1915800 [ 9849.452417] aops:ceph_aops ino:1000058db9e dentry name(?):"f9XXXXXX" [ 9849.452432] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ 9849.452441] raw: 0017ffffc0000000 0000000000000000 dead000000000122 ffff88816110d248 [ 9849.452445] raw: 0000000000010781 0000000000000000 00000003ffffffff ffff8881a1915800 [ 9849.452447] page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio)) [ 9849.452474] ------------[ cut here ]------------ [ 9849.452476] kernel BUG at mm/filemap.c:1504! [ 9849.478635] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI [ 9849.481772] CPU: 2 UID: 0 PID: 84223 Comm: fsstress Not tainted 7.0.0-rc1+ #18 PREEMPT(full) [ 9849.482881] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-9.fc43 06/1 0/2025 [ 9849.484539] RIP: 0010:folio_unlock+0x85/0xa0 [ 9849.485076] Code: 89 df 31 f6 e8 1c f3 ff ff 48 8b 5d f8 c9 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 48 c7 c6 80 6c d9 a7 48 89 df e8 4b b3 10 00 <0f> 0b 48 89 df e8 21 e6 2c 00 eb 9d 0f 1f 40 00 66 66 2e 0f 1f 84 [ 9849.493818] RSP: 0018:ffff8881bb8076b0 EFLAGS: 00010246 [ 9849.495740] RAX: 0000000000000000 RBX: ffffea00070c8980 RCX: 0000000000000000 [ 9849.498678] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 9849.500559] RBP: ffff8881bb8076b8 R08: 0000000000000000 R09: 0000000000000000 [ 9849.501097] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000010782000 [ 9849.502108] R13: ffff8881935de738 R14: ffff88816110d010 R15: 0000000000001000 [ 9849.502516] FS: 00007e36cbe94740(0000) GS:ffff88824a899000(0000) knlGS:0000000000000000 [ 9849.502996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9849.503810] CR2: 000000c0002b0000 CR3: 000000011bbf6004 CR4: 0000000000772ef0 [ 9849.504459] PKRU: 55555554 [ 9849.504626] Call Trace: [ 9849.505242] <TASK> [ 9849.505379] netfs_write_begin+0x7c8/0x10a0 [ 9849.505877] ? __kasan_check_read+0x11/0x20 [ 9849.506384] ? __pfx_netfs_write_begin+0x10/0x10 [ 9849.507178] ceph_write_begin+0x8c/0x1c0 [ 9849.507934] generic_perform_write+0x391/0x8f0 [ 9849.508503] ? __pfx_generic_perform_write+0x10/0x10 [ 9849.509062] ? file_update_time_flags+0x19a/0x4b0 [ 9849.509581] ? ceph_get_caps+0x63/0xf0 [ 9849.510259] ? ceph_get_caps+0x63/0xf0 [ 9849.510530] ceph_write_iter+0xe79/0x1ae0 [ 9849.511282] ? __pfx_ceph_write_iter+0x10/0x10 [ 9849.511839] ? lock_acquire+0x1ad/0x310 [ 9849.512334] ? ksys_write+0xf9/0x230 [ 9849.512582] ? lock_is_held_type+0xaa/0x140 [ 9849.513128] vfs_write+0x512/0x1110 [ 9849.513634] ? __fget_files+0x33/0x350 [ 9849.513893] ? __pfx_vfs_write+0x10/0x10 [ 9849.514143] ? mutex_lock_nested+0x1b/0x30 [ 9849.514394] ksys_write+0xf9/0x230 [ 9849.514621] ? __pfx_ksys_write+0x10/0x10 [ 9849.514887] ? do_syscall_64+0x25e/0x1520 [ 9849.515122] ? __kasan_check_read+0x11/0x20 [ 9849.515366] ? trace_hardirqs_on_prepare+0x178/0x1c0 [ 9849.515655] __x64_sys_write+0x72/0xd0 [ 9849.515885] ? trace_hardirqs_on+0x24/0x1c0 [ 9849.516130] x64_sys_call+0x22f/0x2390 [ 9849.516341] do_syscall_64+0x12b/0x1520 [ 9849.516545] ? do_syscall_64+0x27c/0x1520 [ 9849.516783] ? do_syscall_64+0x27c/0x1520 [ 9849.517003] ? lock_release+0x318/0x480 [ 9849.517220] ? __x64_sys_io_getevents+0x143/0x2d0 [ 9849.517479] ? percpu_ref_put_many.constprop.0+0x8f/0x210 [ 9849.517779] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 9849.518073] ? do_syscall_64+0x25e/0x1520 [ 9849.518291] ? __kasan_check_read+0x11/0x20 [ 9849.518519] ? trace_hardirqs_on_prepare+0x178/0x1c0 [ 9849.518799] ? do_syscall_64+0x27c/0x1520 [ 9 ---truncated--- | Jul 19, 2026 |
| CVE-2026-64064(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_invalidate_folio() to clear dirty bit if all changes gone If a streaming write is made, this will leave the relevant modified folio in a not-uptodate, but dirty state with a netfs_folio struct hung off of folio->private indicating the dirty range. Subsequently truncating the file such that the dirty data in the folio is removed, but the first part of the folio theoretically remains will cause the netfs_folio struct to be discarded... but will leave the dirty flag set. If the folio is then read via mmap(), netfs_read_folio() will see that the page is dirty and jump to netfs_read_gaps() to fill in the missing bits. netfs_read_gaps(), however, expects there to be a netfs_folio struct present and can oops because truncate removed it. Fix this by calling folio_cancel_dirty() in netfs_invalidate_folio() in the event that all the dirty data in the folio is erased (as nfs does). Also add some tracepoints to log modifications to a dirty page. This can be reproduced with something like: dd if=/dev/zero of=/xfstest.test/foo bs=1M count=1 umount /xfstest.test mount /xfstest.test xfs_io -c "w 0xbbbf 0xf96c" \ -c "truncate 0xbbbf" \ -c "mmap -r 0xb000 0x11000" \ -c "mr 0xb000 0x11000" \ /xfstest.test/foo with fscaching disabled (otherwise streaming writes are suppressed) and a change to netfs_perform_write() to disallow streaming writes if the fd is open O_RDWR: if (//(file->f_mode & FMODE_READ) || <--- comment this out netfs_is_cache_enabled(ctx)) { It should be reproducible even without this change, but if prevents the above trivial xfs_io command from reproducing it. Note that the initial dd is important: the file must start out sufficiently large that the zero-point logic doesn't just clear the gaps because it knows there's nothing in the file to read yet. Unmounting and mounting is needed to clear the pagecache (there are other ways to do that that may also work). This was initially reproduced with the generic/522 xfstest on some patches that remove the FMODE_READ restriction. | Jul 19, 2026 |
| CVE-2026-64063(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix streaming write being overwritten In order to avoid reading whilst writing, netfslib will allow "streaming writes" in which dirty data is stored directly into folios without reading them first. Such folios are marked dirty but may not be marked uptodate. If a folio is entirely written by a streaming write, uptodate will be set, otherwise it will have a netfs_folio struct attached to ->private recording the dirty region. In the event that a partially written streaming write page is to be overwritten entirely by a single write(), netfs_perform_write() will try to copy over it, but doesn't discard the netfs_folio if it succeeds; further, it doesn't correctly handle a partial copy that overwrites some of the dirty data. Fix this by the following: (1) If the folio is successfully overwritten, free the netfs_folio struct before marking the page uptodate. (2) If the copy to the folio partially fails, but short of the dirty data, just ignore the copy. (3) If the copy partially fails and overwrites some of the dirty data, accept the copy, update the netfs_folio struct to record the new data. If the folio is now filled, free the netfs_folio and set uptodate, otherwise return a partial write. Found with: fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \ /xfstest.test/junk --replay-ops=junk.fsxops using the following as junk.fsxops: truncate 0x0 0 0x927c0 write 0x63fb8 0x53c8 0 copy_range 0xb704 0x19b9 0x24429 0x79380 write 0x2402b 0x144a2 0x90660 * write 0x204d5 0x140a0 0x927c0 * copy_range 0x1f72c 0x137d0 0x7a906 0x927c0 * read 0x00000 0x20000 0x9157c read 0x20000 0x20000 0x9157c read 0x40000 0x20000 0x9157c read 0x60000 0x20000 0x9157c read 0x7e1a0 0xcfb9 0x9157c on cifs with the default cache option. It shows folio 0x24 misbehaving if the FMODE_READ check is commented out in netfs_perform_write(): if (//(file->f_mode & FMODE_READ) || netfs_is_cache_enabled(ctx)) { and no fscache. This was initially found with the generic/522 xfstest. | Jul 19, 2026 |
| CVE-2026-64062(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix potential deadlock in write-through mode Fix netfs_advance_writethrough() to always unlock the supplied folio and to mark it dirty if it isn't yet written to the end. Unfortunately, it can't be marked for writeback until the folio is done with as that may cause a deadlock against mmapped reads and writes. Even though it has been marked dirty, premature writeback can't occur as the caller is holding both inode->i_rwsem (which will prevent concurrent truncation, fallocation, DIO and other writes) and ictx->wb_lock (which will cause flushing to wait and writeback to skip or wait). Note that this may be easier to deal with once the queuing of folios is split from the generation of subrequests. | Jul 19, 2026 |
| CVE-2026-64061(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix early put of sink folio in netfs_read_gaps() Fix netfs_read_gaps() to release the sink page it uses after waiting for the request to complete. The way the sink page is used is that an ITER_BVEC-class iterator is created that has the gaps from the target folio at either end, but has the sink page tiled over the middle so that a single read op can fill in both gaps. The bug was found by KASAN detecting a UAF on the generic/075 xfstest in the cifsd kernel thread that handles reception of data from the TCP socket: BUG: KASAN: use-after-free in _copy_to_iter+0x48a/0xa20 Write of size 885 at addr ffff888107f92000 by task cifsd/1285 CPU: 2 UID: 0 PID: 1285 Comm: cifsd Not tainted 7.0.0 #6 PREEMPT(lazy) Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x17f/0x4f1 kasan_report+0x100/0x1e0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x3c/0x60 _copy_to_iter+0x48a/0xa20 __skb_datagram_iter+0x2c9/0x430 skb_copy_datagram_iter+0x6e/0x160 tcp_recvmsg_locked+0xce0/0x1130 tcp_recvmsg+0xeb/0x300 inet_recvmsg+0xcf/0x3a0 sock_recvmsg+0xea/0x100 cifs_readv_from_socket+0x3a6/0x4d0 [cifs] cifs_read_iter_from_socket+0xdd/0x130 [cifs] cifs_readv_receive+0xaad/0xb10 [cifs] cifs_demultiplex_thread+0x1148/0x1740 [cifs] kthread+0x1cf/0x210 | Jul 19, 2026 |
| CVE-2026-64060(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix leak of request in netfs_write_begin() error handling Fix netfs_write_begin() to not leak our ref on the request in the event that we get an error from netfs_wait_for_read(). | Jul 19, 2026 |
| CVE-2026-64059(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio->private handling in netfs_perform_write() Under some circumstances, netfs_perform_write() doesn't correctly manipulate folio->private between NULL, NETFS_FOLIO_COPY_TO_CACHE, pointing to a group and pointing to a netfs_folio struct, leading to potential multiple attachments of private data with associated folio ref leaks and also leaks of netfs_folio structs or netfs_group refs. Fix this by consolidating the place at which a folio is marked uptodate in one place and having that look at what's attached to folio->private and decide how to clean it up and then set the new group. Also, the content shouldn't be flushed if group is NULL, even if a group is specified in the netfs_group parameter, as that would be the case for a new folio. A filesystem should always specify netfs_group or never specify netfs_group. The Sashiko auto-review tool noted that it was theoretically possible that the fpos >= ctx->zero_point section might leak if it modified a streaming write folio. This is unlikely, but with a network filesystem, third party changes can happen. It also pointed out that __netfs_set_group() would leak if called multiple times on the same folio from the "whole folio modify section". | Jul 19, 2026 |
| CVE-2026-64058(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_read_folio() to wait on writeback Fix netfs_read_folio() to wait for an ongoing writeback to complete so that it can trust the dirty flag and whatever is attached to folio->private (folio->private may get cleaned up by the collector before it clears the writeback flag). | Jul 19, 2026 |
| CVE-2026-64057(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: afs: Fix the locking used by afs_get_link() The afs filesystem in the kernel doesn't do locking correctly for symbolic links. There are a number of problems: (1) It doesn't do any locking around afs_read_single() to prevent races between multiple ->get_link() calls, thereby allowing the possibility of leaks. (2) It doesn't use RCU barriering when accessing the buffer pointers during RCU pathwalk. (3) It can race with another thread updating the contents of the symlink if a third party updated it on the server. Fix this by the following means: (0) Move symlink handling into its own file as this makes it more complicated. (1) Take the validate_lock around afs_read_single() to prevent races between multiple ->get_link() calls. (2) Keep a separate copy of the symlink contents with an rcu_head. This is always going to be a lot smaller than a page, so it can be kmalloc'd and save quite a bit of memory. It also needs a refcount for non-RCU pathwalk. (3) Split the symlink read and write-to-cache routines in afs from those for directories. (4) Discard the I/O buffer as soon as the write-to-cache completes as this is a full page (plus a folio_queue). (5) If there's no cache, discard the I/O buffer immediately after reading and copying if there is no cache. | Jul 19, 2026 |
| CVE-2026-64056(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Make RX SKB per-port The SKB used to assemble packets from fragments in gmac_rx() is static local, but the Gemini has two ethernet ports, meaning there can be races between the ports on a bad day if a device is using both. Make the RX SKB a per-port variable and carry it over between invocations in the port struct instead. Zero the pointer once we call napi_gro_frags(), on error (after calling napi_free_frags()) or if the port is stopped. Zero it in some place where not strictly necessary just to emphasize what is going on. This was found by Sashiko during normal patch review. | Jul 19, 2026 |
| CVE-2026-64055(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Carry over frag counter The gmac_rx() NAPI poll function assembles packets in an SKB from a ring buffer. If the ring buffer gets completely emptied during a poll cycle, we exit gmac_rx(), but the packet is not yet completely assembled in the SKB, yet the fragment counter frag_nr is reset to zero on the next invocation. Solve this by making the RX fragment counter a part of the port struct, and carry it over between invocations. Reset the fragment counter only right after calling napi_gro_frags(), on error (after calling napi_free_frags()) or if stopping the port. Reset it in some place where not strictly necessary just to emphasize what is going on. This was found by Sashiko during normal patch review. | Jul 19, 2026 |
| CVE-2026-64054(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net: shaper: reject duplicate leaves in GROUP request net_shaper_nl_group_doit() does not deduplicate NET_SHAPER_A_LEAVES entries. When userspace supplies the same leaf handle twice, the same old-parent pointer lands twice in old_nodes[]. The cleanup loop double frees the parent. Of course the same parent may still be in old_nodes[] twice if we are moving multiple of its leaves. Note that this patch also implicitly fixes the fact that the i >= leaves_count path forgets to set ret. | Jul 19, 2026 |
| CVE-2026-64053(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: block: don't overwrite bip_vcnt in bio_integrity_copy_user() bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h read past the bip_vec[] flex array. On READ the read is in bounds but lands on a saved user bvec instead of the bounce. The line was added for split propagation, but bio_integrity_clone() doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER. | Jul 19, 2026 |
| CVE-2026-64052(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user() pin_user_pages_fast() can partially succeed and return the number of pages that were actually pinned. However, the bio_integrity_map_user() does not handle this partial pinning. This leads to a general protection fault since bvec_from_pages() dereferences an unpinned page address, which is 0. To fix this, add a check to verify that all requested memory is pinned. If partial pinning occurs, unpin the memory and return -EFAULT. Kernel Oops: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 0 PID: 1061 Comm: nvme-passthroug Not tainted 7.0.0-11783-g90957f9314e8-dirty #16 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 RIP: 0010:bio_integrity_map_user.cold+0x1b0/0x9d6 | Jul 19, 2026 |
| CVE-2026-64051(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Add overflow check to remap_pfn_range during mmap The call to remap_pfn_range in qaic_gem_object_mmap is susceptible to (re)mapping beyond the VMA if the BO is too large. This can cause use after free issues when munmap() unmaps only the VMA region and not the additional mappings. To prevent this, check the remaining size of the VMA before remapping and truncate the remapped length if sg->length is too large. [jhugo: fix braces from checkpatch --strict] | Jul 19, 2026 |
| CVE-2026-64050(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: don't mix devm and drmm functions Mixing devm and drmm functions will result in a use-after-free on msm driver teardown if userspace keeps a reference on the drm device: The WB connector data will be destroyed because of the use of devm_kzalloc()), while the usersoace still can try interacting with the WB connector (which uses drmm_ functions). Change dpu_writeback_init() to use drmm_. Patchwork: https://patchwork.freedesktop.org/patch/722656/ | Jul 19, 2026 |
| CVE-2026-64049(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: fix userspace-triggered crash on a2xx-a4xx Before a5xx Adreno driver will not try fetching UBWC params (because those generations didn't support UBWC anyway), however it's still possible to query UBWC-related params from the userspace, triggering possible NULL pointer dereference. Check for UBWC config in adreno_get_param() and return sane defaults if there is none. Patchwork: https://patchwork.freedesktop.org/patch/717778/ | Jul 19, 2026 |
| CVE-2026-64048(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt() populates V2 entries starting at index 1, so when no V1 device is selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] == NULL and ism_chid[0] == 0. smc_v2_determine_accepted_chid() then matches the peer's CHID against the array starting from index 0 using the CHID alone. A malicious peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches the empty slot, ini->ism_selected becomes 0, and the subsequent ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at offsetof(struct smcd_dev, lgr_lock) == 0x68: BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0 Write of size 4 at addr 0000000000000068 by task exploit/144 Call Trace: _raw_spin_lock_bh smc_conn_create (net/smc/smc_core.c:1997) __smc_connect (net/smc/af_smc.c:1447) smc_connect (net/smc/af_smc.c:1720) __sys_connect __x64_sys_connect do_syscall_64 Require ism_dev[i] to be non-NULL before accepting a CHID match. | Jul 19, 2026 |
| CVE-2026-64047(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring When an sk_msg scatterlist ring wraps (sg.end < sg.start), tls_push_record() chains the tail portion of the ring to the head using sg_chain(). An extra entry in the sg array is reserved for this: struct sk_msg_sg { [...] /* The extra two elements: * 1) used for chaining the front and sections when the list becomes * partitioned (e.g. end < start). The crypto APIs require the * chaining; * 2) to chain tailer SG entries after the message. */ struct scatterlist data[MAX_MSG_FRAGS + 2]; The current code uses MAX_SKB_FRAGS + 1 as the ring size: sg_chain(&msg_pl->sg.data[msg_pl->sg.start], MAX_SKB_FRAGS - msg_pl->sg.start + 1, msg_pl->sg.data); This places the chain pointer at sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. = &data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 = data[start + (MAX_SKB_FRAGS - start + 1) - 1] = data[MAX_SKB_FRAGS] instead of the true last entry. This is likely due to a "race" of the commit under Fixes landing close to commit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down") Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested by Sabrina). | Jul 19, 2026 |
| CVE-2026-64046(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: net: tls: prevent chain-after-chain in plain text SG Sashiko points out that if end = 0 (start != 0) the current code will create a chain link to content type right after the wrap link: This would create a chain where the wrap link points directly to another chain link. The scatterlist API sg_next iterator does not recursively resolve consecutive chain links. meaning this is illegal input to crypto. The wrapping link is unnecessary if end = 0. end is the entry after the last one used so end = 0 means there's nothing pushed after the wrap: end start i v v v [ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap] Skip the wrapping in this case. TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0. This avoids the chain-after-chain. Move the wrap chaining before marking END and chaining off content type, that feels like more logical ordering to me, but should not matter from functional perspective. | Jul 19, 2026 |
| CVE-2026-64045(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - use cached peer pointer in ovpn_tcp_close() ovpn_tcp_close() loads the ovpn_socket via rcu_dereference_sk_user_data() under rcu_read_lock(), takes a reference on sock->peer, caches the peer pointer in a local, and drops the read lock. It then passes sock->peer (rather than the cached local) to ovpn_peer_del(), re-dereferencing the ovpn_socket after the RCU read section has ended. Unlike ovpn_tcp_sendmsg(), which uses the same "load under RCU, use after unlock" pattern but is protected by lock_sock() held across the function, ovpn_tcp_close() runs without the socket lock: inet_release() invokes sk_prot->close() without taking lock_sock first. ovpn_socket_release() can therefore complete its kref_put -> detach -> synchronize_rcu -> kfree(sock) sequence concurrently, in the window after ovpn_tcp_close() drops rcu_read_lock() but before it dereferences sock->peer. The synchronize_rcu() in ovpn_socket_release() protects readers that use the dereferenced pointer inside the RCU read section, not those that escape the pointer to a local and use it afterwards. A reproducer follows the pattern of commit 94560267d6c4 ("ovpn: tcp - don't deref NULL sk_socket member after tcp_close()"): trigger a peer removal (keepalive expiration or netlink OVPN_CMD_DEL_PEER) at the same moment userspace closes the TCP fd. That commit fixed the detach-side of the same race window; this one fixes the close-side at a different victim. Tighten the entry block to read sock->peer exactly once into the cached peer local, and route all subsequent uses (the hold check, the ovpn_peer_del() call, and the prot->close() invocation) through that local. sock->peer is only ever written once in ovpn_socket_new() under lock_sock(), before rcu_assign_sk_user_data() publishes the ovpn_socket, and is never reassigned afterwards - but the previous multi-read pattern made that invariant implicit rather than explicit. The same multi-read shape exists in ovpn_tcp_recvmsg(), ovpn_tcp_sendmsg(), ovpn_tcp_data_ready() and ovpn_tcp_write_space(); those will be cleaned up via a dedicated helper in a follow-up net-next series. | Jul 19, 2026 |
| CVE-2026-64044(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ovpn: respect peer refcount in CMD_NEW_PEER error path ovpn_nl_peer_new_doit()'s error path calls ovpn_peer_release() directly rather than ovpn_peer_put(), bypassing the kref. The accompanying comment ("peer was not yet hashed, thus it is not used in any context") holds for UDP but not for TCP. For UDP, the ovpn_socket union uses the .ovpn arm and never points back at a peer; UDP encap_recv looks up peers via the not-yet-populated hashtables, so the new peer is unreachable until ovpn_peer_add() publishes it. For TCP, ovpn_socket_new() sets ovpn_sock->peer and ovpn_tcp_socket_attach() publishes ovpn_sock via rcu_assign_sk_user_data(). From that moment until ovpn_socket_release() detaches in the error path, the TCP fd is fully wired: userspace recvmsg / sendmsg / close / poll on the fd, as well as the strparser-driven ovpn_tcp_rcv() path, can reach the peer through sk_user_data -> ovpn_sock->peer and bump its refcount via ovpn_peer_hold(). ovpn_tcp_socket_wait_finish() (called inside ovpn_socket_release()) drains strparser and the tx work, but does not synchronize with userspace syscall callers that already hold a peer reference. If ovpn_nl_peer_modify() or ovpn_peer_add() returns an error while such a caller is in flight - notably an ovpn_tcp_recvmsg() blocked in __skb_recv_datagram() on peer->tcp.user_queue - the direct ovpn_peer_release() destroys the peer while the caller still holds the reference, and the eventual ovpn_peer_put() from that caller operates on freed memory. Replace the direct destructor call with ovpn_peer_put() so the kref correctly defers destruction until the last reference is dropped. In the common case where no concurrent user is present, behaviour is unchanged: the kref hits zero immediately and ovpn_peer_release_kref() runs the same destructor. With this conversion ovpn_peer_release() has no callers outside peer.c - ovpn_peer_release_kref() in the same translation unit is the only remaining user - so make it static and drop its declaration from peer.h. | Jul 19, 2026 |
| CVE-2026-64043(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ovpn: fix race between deleting interface and adding new peer While deleting an existing ovpn interface, there is a very narrow window where adding a new peer via netlink may cause the netdevice to hang and prevent its unregistration. It may happen during ovpn_dellink(), when all existing peers are freed and the device is queued for deregistration, but a CMD_PEER_NEW message comes in adding a new peer that takes again a reference to the netdev. At this point there is no way to release the device because we are under the assumption that all peers were already released. Fix the race condition by releasing all peers in ndo_uninit(), when the netdevice has already been removed from the netdev list. Also ovpn_peer_add() has now an extra check that forces the function to bail out if the device reg_state is not REGISTERED. This way any incoming CMD_PEER_NEW racing with the interface deletion routine will simply stop before adding the peer. Note that the above check happens while holding the netdev_lock to prevent racing netdev state changes. ovpn_dellink() is now empty and can be removed. | Jul 19, 2026 |
| CVE-2026-64042(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Check BAR resources before exporting a DMABUF A DMABUF exports access to BAR resources and, although they are requested at startup time, we need to ensure they really were reserved before exporting. Otherwise, it's possible to access unreserved resources through the export. Add a check to the DMABUF-creation path. | Jul 19, 2026 |
| CVE-2026-64041(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: fs210x: fix possible buffer overflow In fs210x_effect_scene_info(), a string was copied like this: strscpy(DST, SRC, strlen(SRC) + 1); A buffer overflow would happen if strlen(SRC) >= sizeof(DST). Actually, strscpy() must be used this way: strscpy(DST, SRC, sizeof(DST)); strscpy(DST, SRC); // defaults to sizeof(DST) | Jul 19, 2026 |
| CVE-2026-64040(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix error return when vfs_mkdir() fails When vfs_mkdir() fails, the error code is not extracted from the returned error pointer. This causes mkdir_error to be reached with ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a proper error pointer. Fix this by extracting the error code from the error pointer when vfs_mkdir() fails. | Jul 19, 2026 |
| CVE-2026-64039(opens NVD record) | High | 7.7 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/snapshot: fix dumping of the unaligned regions The snapshotting code internally aligns data segment to 16 bytes. This works fine for DPU code (where most of the regions are aligned), but fails for snapshotting of the DSI data (because DSI data region is shifted by 4 bytes). Fix the code by removing length alignment and by accurately printing last registers in the region. While reworking the code also fix the 16x memory overallocation in msm_disp_state_dump_regs(). Patchwork: https://patchwork.freedesktop.org/patch/725449/ | Jul 19, 2026 |
| CVE-2026-64038(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Stop work before releasing hwmon device Sashiko reports: In lm90_probe(), the devm action to cancel the alert_work and report_work (lm90_restore_conf) is registered in lm90_init_client() before devm_hwmon_device_register_with_info() is called. Because devm executes cleanup actions in reverse order during module unbind or probe failure, the hwmon device is unregistered and freed first. If lm90_alert_work() or lm90_report_alarms() runs in the window between the hwmon device being freed and the delayed works being cancelled, lm90_update_alarms() will dereference the freed data->hwmon_dev here. Fix the problem by canceling the workers separately after registering the hwmon device and before registering the interrupt handler. This ensures that the workers are canceled after interrupts are disabled and before the hwmon device is released. Add "shutdown" flag to indicate that device shutdown is in progress to prevent workers from being re-armed. | Jul 19, 2026 |
| CVE-2026-64037(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled When the TLC notification disables AMSDU for a TID, the MLD driver sets max_tid_amsdu_len to the sentinel value 1. The TSO segmentation path in iwl_mld_tx_tso_segment() checks for zero but not for this sentinel, allowing it to reach the num_subframes calculation: num_subframes = (max_tid_amsdu_len + pad) / (subf_len + pad) = (1 + 2) / (1534 + 2) = 0 This zero propagates to iwl_tx_tso_segment() which sets: gso_size = num_subframes * mss = 0 Calling skb_gso_segment() with gso_size=0 creates over 32000 tiny segments from a single GSO skb. This floods the TX ring with ~1024 micro-frames (the rest are purged), creating a massive burst of TX completion events that can lead to memory corruption and a subsequent use-after-free in TCP's retransmit queue (refcount underflow in tcp_shifted_skb, NULL deref in tcp_rack_detect_loss). The MVM driver is immune because it checks mvmsta->amsdu_enabled before reaching the num_subframes calculation. The MLD driver has no equivalent bitmap check and relies solely on max_tid_amsdu_len, which does not catch the sentinel value. Fix this by detecting the sentinel value (max_tid_amsdu_len == 1) at the existing check and falling back to non-AMSDU TSO segmentation. Also add a WARN_ON_ONCE guard after the num_subframes division as defense-in-depth to catch any future code paths that produce zero through a different mechanism. | Jul 19, 2026 |
| CVE-2026-64036(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: cgroup/rstat: validate cpu before css_rstat_cpu() access css_rstat_updated() is exposed as a BPF kfunc and accepts a caller-provided cpu argument. The function uses cpu for per-cpu rstat lookups without checking whether it refers to a valid possible CPU. A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu == 0x7fffffff triggers: UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9 index 2147483647 is out of range for type 'long unsigned int [64]' Call Trace: css_rstat_updated bpf_iter_run_prog cgroup_iter_seq_show bpf_seq_read Add cpu validation to the BPF-facing css_rstat_updated() kfunc and move the common implementation to __css_rstat_updated() for in-kernel callers. | Jul 19, 2026 |
| CVE-2026-64035(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: igc: set tx buffer type for SMD frames Sashiko pointed out that igc_fpe_init_smd_frame() initializes igc_tx_buffer fields for an SMD skb, but does not set the buffer type: https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp Since igc_tx_buffer entries are reused, a stale XDP or XSK type can remain and make TX completion use the wrong cleanup path. Set the buffer type to IGC_TX_BUFFER_TYPE_SKB. | Jul 19, 2026 |
| CVE-2026-64034(opens NVD record) | Critical | 9.3 | In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix TOCTOU double-fetch of hwc_msg_id from DMA buffer In mana_hwc_rx_event_handler(), resp->response.hwc_msg_id is read from DMA-coherent memory and bounds-checked, then mana_hwc_handle_resp() re-reads the same field from the same DMA buffer for test_bit() and pointer arithmetic. DMA-coherent memory is mapped uncacheable on x86 and is shared, unencrypted, in Confidential VMs (SEV-SNP/TDX), so each load goes directly to host-visible memory. A H/W can modify the value between the check and the use, bypassing the bounds validation. Fix this by reading hwc_msg_id exactly once using READ_ONCE() into a stack-local variable in mana_hwc_rx_event_handler(), and passing the validated value as a parameter to mana_hwc_handle_resp(). | Jul 19, 2026 |
| CVE-2026-64033(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: Fix use-after-free in path file creation cleanup In the error path of rtrs_srv_create_path_files(), the sysfs root folders may already have been created and srv_path->kobj may already have been initialized. If a later step fails, the cleanup currently calls kobject_put(&srv_path->kobj) before rtrs_srv_destroy_once_sysfs_root_folders(srv_path). kobject_put() may drop the last reference to srv_path->kobj and invoke the release callback, rtrs_srv_release(), which frees srv_path. The following call to rtrs_srv_destroy_once_sysfs_root_folders(srv_path) then dereferences srv_path internally to access srv_path->srv, resulting in a use-after-free. This failure path is reached before rtrs_srv_create_path_files() returns success, so the successful-path lifetime handling is not involved. Fix this by destroying the sysfs root folders before calling kobject_put(&srv_path->kobj), so srv_path is still valid while the helper accesses it. This issue was found by a static analysis tool I am developing. | Jul 19, 2026 |
| CVE-2026-64032(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: bridge: mcast: Fix a possible use-after-free when removing a bridge port When per-VLAN multicast snooping is enabled, the bridge iterates over all the bridge ports, disables the per-port multicast context on each port and enables the per-{port, VLAN} multicast contexts instead. The reverse happens when per-VLAN multicast snooping is disabled. When global multicast snooping is enabled, the bridge iterates over all the bridge ports and enables the per-port multicast context on each port. The reverse happens when multicast snooping is disabled. The above scheme can result in a situation where both types of contexts (per-port and per-{port, VLAN}) are enabled on a single bridge port: # ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev br1 type bridge mcast_vlan_snooping 1 # ip link set dev br1 type bridge mcast_snooping 0 # ip link set dev br1 type bridge mcast_snooping 1 This is not intended and it is a problem since the commit cited below. Prior to this commit, when removing a bridge port, br_multicast_disable_port() would disable the per-port multicast context and the per-{port, VLAN} multicast contexts would get disabled when flushing VLANs. After this commit, br_multicast_disable_port() only disables the per-port multicast context if per-VLAN multicast snooping is disabled. If both types of contexts were enabled on the port when it was removed, the per-port multicast context would remain enabled when freeing the bridge port, leading to a use-after-free [1]. Fix by preventing the bridge from enabling / disabling the per-port multicast contexts when toggling global multicast snooping if per-VLAN multicast snooping is enabled. [1] ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0 [...] Call Trace: <IRQ> __debug_check_no_obj_freed (lib/debugobjects.c:1116) kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565) kobject_cleanup (lib/kobject.c:689) rcu_do_batch (kernel/rcu/tree.c:2617) rcu_core (kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) __irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735) irq_exit_rcu (kernel/softirq.c:752) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47)) </IRQ> | Jul 19, 2026 |
| CVE-2026-64031(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: erofs: fix managed cache race for unaligned extents After unaligned compressed extents were introduced, the following race could occur: [Thread 1] [Thread 2] (z_erofs_fill_bio_vec) <handle a Z_EROFS_PREALLOCATED_FOLIO folio> ... filemap_add_folio (1) (z_erofs_bind_cache) <the same folio is found..> .. .. folio_attach_private (2) filemap_add_folio (3) again Since (1) is executed but (2) hasn't been executed yet, it's possible that another thread finds the same managed folio in z_erofs_bind_cache() for a different pcluster and calls filemap_add_folio() again since folio->private is still Z_EROFS_PREALLOCATED_FOLIO. Fix this by explicitly clearing folio->private before making the folio visible in the managed cache so that another pcluster can simply wait on the locked managed folio as what we did for other shared cases [1]. This only impacts unaligned data compression (`-E48bit` with zstd, for example). [1] Commit 9e2f9d34dd12 ("erofs: handle overlapped pclusters out of crafted images properly") was originally introduced to handle crafted overlapped extents, but it addresses unaligned extents as well. | Jul 19, 2026 |
| CVE-2026-64030(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15. sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14), making index 15 out-of-bounds. A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response action frame with a PER_STA_PROFILE subelement where link_id = 15. The unsolicited-notification path (dialog_token = 0) is reachable any time EPCS is already enabled, without any prior client request. sdata->link[15] reads into the first word of sdata->activate_links_work (a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD), so the NULL check on the result does not catch the invalid access. The garbage pointer is then passed to ieee80211_sta_wmm_params(), which dereferences link->sdata and crashes the kernel. The same class of bug was fixed for ieee80211_ml_reconfiguration() by commit 162d331d833d ("wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration"). | Jul 19, 2026 |
| CVE-2026-64029(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Serialize UMP output teardown with event_input seq_ump_process_event() borrows client->out_rfile.output without synchronizing with the first-open and last-close transition in seq_ump_client_open() and seq_ump_client_close(). The last output unuse can therefore drop opened[STR_OUT] to zero and release the rawmidi file while an in-flight event_input callback is still inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream runtime exposed to teardown before the write path has taken its own buffer reference. Add a per-client rwlock for the event_input-visible output file. Publish a newly opened output file under the write side, and hold the read side from the output lookup through snd_rawmidi_kernel_write(). The last output close copies and clears the visible output file under the write side, then drops the lock and releases the saved rawmidi file. Use IRQ-safe rwlock guards because event_input can also be reached from atomic sequencer delivery. The buggy scenario involves two paths, with each column showing the order within that path: path A label: event_input path path B label: last unuse path 1. seq_ump_process_event() reads 1. seq_ump_client_close() client->out_rfile.output. drops opened[STR_OUT] to zero. 2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release() has not yet pinned runtime. closes the output file. 3. The writer continues using 3. close_substream() frees the borrowed substream. substream->runtime. This keeps the output substream and runtime alive for the full event_input write while keeping rawmidi release outside the rwlock. KASAN reproduced this as a slab-use-after-free in snd_rawmidi_kernel_write1(), with allocation through seq_ump_use()/snd_seq_port_connect() and free through seq_ump_unuse()/snd_seq_port_disconnect(). Validation reproduced this kernel report: KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400 RIP: 0033:0x7f5528af837f Read of size 8 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_rawmidi_kernel_write1+0x9d/0x400 (?:?) __asan_load8+0x82/0xb0 (?:?) update_stack_state+0x1ef/0x2d0 (?:?) snd_rawmidi_kernel_write+0x1a/0x20 (?:?) seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82) __snd_seq_deliver_single_event+0x8a/0xe0 (?:?) snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?) lock_acquire+0x14e/0x2e0 (?:?) find_held_lock+0x31/0x90 (?:?) snd_seq_port_use_ptr+0xa6/0xe0 (?:?) __kasan_check_write+0x18/0x20 (?:?) do_raw_read_unlock+0x32/0xa0 (?:?) _raw_read_unlock+0x26/0x50 (?:?) snd_seq_deliver_single_event+0x45c/0x4b0 (?:?) snd_seq_deliver_event+0x10d/0x1b0 (?:?) snd_seq_client_enqueue_event+0x192/0x240 (?:?) snd_seq_write+0x2cd/0x450 (?:?) apparmor_file_permission+0x20/0x30 (?:?) security_file_permission+0x51/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) __fget_files+0x12b/0x220 (?:?) lock_release+0xc8/0x2a0 (?:?) __rcu_read_unlock+0x74/0x2d0 (?:?) __fget_files+0x135/0x220 (?:?) ksys_write+0x15a/0x180 (?:?) rcu_is_watching+0x24/0x60 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | Jul 19, 2026 |