Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
29,675 matching · page 425/594Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2025-71079(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: net: nfc: fix deadlock between nfc_unregister_device and rfkill_fop_write A deadlock can occur between nfc_unregister_device() and rfkill_fop_write() due to lock ordering inversion between device_lock and rfkill_global_mutex. The problematic lock order is: Thread A (rfkill_fop_write): rfkill_fop_write() mutex_lock(&rfkill_global_mutex) rfkill_set_block() nfc_rfkill_set_block() nfc_dev_down() device_lock(&dev->dev) <- waits for device_lock Thread B (nfc_unregister_device): nfc_unregister_device() device_lock(&dev->dev) rfkill_unregister() mutex_lock(&rfkill_global_mutex) <- waits for rfkill_global_mutex This creates a classic ABBA deadlock scenario. Fix this by moving rfkill_unregister() and rfkill_destroy() outside the device_lock critical section. Store the rfkill pointer in a local variable before releasing the lock, then call rfkill_unregister() after releasing device_lock. This change is safe because rfkill_fop_write() holds rfkill_global_mutex while calling the rfkill callbacks, and rfkill_unregister() also acquires rfkill_global_mutex before cleanup. Therefore, rfkill_unregister() will wait for any ongoing callback to complete before proceeding, and device_del() is only called after rfkill_unregister() returns, preventing any use-after-free. The similar lock ordering in nfc_register_device() (device_lock -> rfkill_global_mutex via rfkill_register) is safe because during registration the device is not yet in rfkill_list, so no concurrent rfkill operations can occur on this device. | Jan 13, 2026 |
| CVE-2025-71078(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: powerpc/64s/slb: Fix SLB multihit issue during SLB preload On systems using the hash MMU, there is a software SLB preload cache that mirrors the entries loaded into the hardware SLB buffer. This preload cache is subject to periodic eviction — typically after every 256 context switches — to remove old entry. To optimize performance, the kernel skips switch_mmu_context() in switch_mm_irqs_off() when the prev and next mm_struct are the same. However, on hash MMU systems, this can lead to inconsistencies between the hardware SLB and the software preload cache. If an SLB entry for a process is evicted from the software cache on one CPU, and the same process later runs on another CPU without executing switch_mmu_context(), the hardware SLB may retain stale entries. If the kernel then attempts to reload that entry, it can trigger an SLB multi-hit error. The following timeline shows how stale SLB entries are created and can cause a multi-hit error when a process moves between CPUs without a MMU context switch. CPU 0 CPU 1 ----- ----- Process P exec swapper/1 load_elf_binary begin_new_exc activate_mm switch_mm_irqs_off switch_mmu_context switch_slb /* * This invalidates all * the entries in the HW * and setup the new HW * SLB entries as per the * preload cache. */ context_switch sched_migrate_task migrates process P to cpu-1 Process swapper/0 context switch (to process P) (uses mm_struct of Process P) switch_mm_irqs_off() switch_slb load_slb++ /* * load_slb becomes 0 here * and we evict an entry from * the preload cache with * preload_age(). We still * keep HW SLB and preload * cache in sync, that is * because all HW SLB entries * anyways gets evicted in * switch_slb during SLBIA. * We then only add those * entries back in HW SLB, * which are currently * present in preload_cache * (after eviction). */ load_elf_binary continues... setup_new_exec() slb_setup_new_exec() sched_switch event sched_migrate_task migrates process P to cpu-0 context_switch from swapper/0 to Process P switch_mm_irqs_off() /* * Since both prev and next mm struct are same we don't call * switch_mmu_context(). This will cause the HW SLB and SW preload * cache to go out of sync in preload_new_slb_context. Because there * was an SLB entry which was evicted from both HW and preload cache * on cpu-1. Now later in preload_new_slb_context(), when we will try * to add the same preload entry again, we will add this to the SW * preload cache and then will add it to the HW SLB. Since on cpu-0 * this entry was never invalidated, hence adding this entry to the HW * SLB will cause a SLB multi-hit error. */ load_elf_binary cont ---truncated--- | Jan 13, 2026 |
| CVE-2025-71075(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: scsi: aic94xx: fix use-after-free in device removal path The asd_pci_remove() function fails to synchronize with pending tasklets before freeing the asd_ha structure, leading to a potential use-after-free vulnerability. When a device removal is triggered (via hot-unplug or module unload), race condition can occur. The fix adds tasklet_kill() before freeing the asd_ha structure, ensuring all scheduled tasklets complete before cleanup proceeds. | Jan 13, 2026 |
| CVE-2025-71074(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: functionfs: fix the open/removal races ffs_epfile_open() can race with removal, ending up with file->private_data pointing to freed object. There is a total count of opened files on functionfs (both ep0 and dynamic ones) and when it hits zero, dynamic files get removed. Unfortunately, that removal can happen while another thread is in ffs_epfile_open(), but has not incremented the count yet. In that case open will succeed, leaving us with UAF on any subsequent read() or write(). The root cause is that ffs->opened is misused; atomic_dec_and_test() vs. atomic_add_return() is not a good idea, when object remains visible all along. To untangle that * serialize openers on ffs->mutex (both for ep0 and for dynamic files) * have dynamic ones use atomic_inc_not_zero() and fail if we had zero ->opened; in that case the file we are opening is doomed. * have the inodes of dynamic files marked on removal (from the callback of simple_recursive_removal()) - clear ->i_private there. * have open of dynamic ones verify they hadn't been already removed, along with checking that state is FFS_ACTIVE. | Jan 13, 2026 |
| CVE-2025-71072(opens NVD record) | High | 8.2 | In the Linux kernel, the following vulnerability has been resolved: shmem: fix recovery on rename failures maple_tree insertions can fail if we are seriously short on memory; simple_offset_rename() does not recover well if it runs into that. The same goes for simple_offset_rename_exchange(). Moreover, shmem_whiteout() expects that if it succeeds, the caller will progress to d_move(), i.e. that shmem_rename2() won't fail past the successful call of shmem_whiteout(). Not hard to fix, fortunately - mtree_store() can't fail if the index we are trying to store into is already present in the tree as a singleton. For simple_offset_rename_exchange() that's enough - we just need to be careful about the order of operations. For simple_offset_rename() solution is to preinsert the target into the tree for new_dir; the rest can be done without any potentially failing operations. That preinsertion has to be done in shmem_rename2() rather than in simple_offset_rename() itself - otherwise we'd need to deal with the possibility of failure after successful shmem_whiteout(). | Jan 13, 2026 |
| CVE-2025-71070(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ublk: clean up user copy references on ublk server exit If a ublk server process releases a ublk char device file, any requests dispatched to the ublk server but not yet completed will retain a ref value of UBLK_REFCOUNT_INIT. Before commit e63d2228ef83 ("ublk: simplify aborting ublk request"), __ublk_fail_req() would decrement the reference count before completing the failed request. However, that commit optimized __ublk_fail_req() to call __ublk_complete_rq() directly without decrementing the request reference count. The leaked reference count incorrectly allows user copy and zero copy operations on the completed ublk request. It also triggers the WARN_ON_ONCE(refcount_read(&io->ref)) warnings in ublk_queue_reinit() and ublk_deinit_queue(). Commit c5c5eb24ed61 ("ublk: avoid ublk_io_release() called after ublk char dev is closed") already fixed the issue for ublk devices using UBLK_F_SUPPORT_ZERO_COPY or UBLK_F_AUTO_BUF_REG. However, the reference count leak also affects UBLK_F_USER_COPY, the other reference-counted data copy mode. Fix the condition in ublk_check_and_reset_active_ref() to include all reference-counted data copy modes. This ensures that any ublk requests still owned by the ublk server when it exits have their reference counts reset to 0. | Jan 13, 2026 |
| CVE-2025-71068(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: svcrdma: bound check rq_pages index in inline path svc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] without verifying rc_curpage stays within the allocated page array. Add guards before the first use and after advancing to a new page. | Jan 13, 2026 |
| CVE-2025-71066(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: Always remove class from active list before deleting in ets_qdisc_change zdi-disclosures@trendmicro.com says: The vulnerability is a race condition between `ets_qdisc_dequeue` and `ets_qdisc_change`. It leads to UAF on `struct Qdisc` object. Attacker requires the capability to create new user and network namespace in order to trigger the bug. See my additional commentary at the end of the analysis. Analysis: static int ets_qdisc_change(struct Qdisc *sch, struct nlattr *opt, struct netlink_ext_ack *extack) { ... // (1) this lock is preventing .change handler (`ets_qdisc_change`) //to race with .dequeue handler (`ets_qdisc_dequeue`) sch_tree_lock(sch); for (i = nbands; i < oldbands; i++) { if (i >= q->nstrict && q->classes[i].qdisc->q.qlen) list_del_init(&q->classes[i].alist); qdisc_purge_queue(q->classes[i].qdisc); } WRITE_ONCE(q->nbands, nbands); for (i = nstrict; i < q->nstrict; i++) { if (q->classes[i].qdisc->q.qlen) { // (2) the class is added to the q->active list_add_tail(&q->classes[i].alist, &q->active); q->classes[i].deficit = quanta[i]; } } WRITE_ONCE(q->nstrict, nstrict); memcpy(q->prio2band, priomap, sizeof(priomap)); for (i = 0; i < q->nbands; i++) WRITE_ONCE(q->classes[i].quantum, quanta[i]); for (i = oldbands; i < q->nbands; i++) { q->classes[i].qdisc = queues[i]; if (q->classes[i].qdisc != &noop_qdisc) qdisc_hash_add(q->classes[i].qdisc, true); } // (3) the qdisc is unlocked, now dequeue can be called in parallel // to the rest of .change handler sch_tree_unlock(sch); ets_offload_change(sch); for (i = q->nbands; i < oldbands; i++) { // (4) we're reducing the refcount for our class's qdisc and // freeing it qdisc_put(q->classes[i].qdisc); // (5) If we call .dequeue between (4) and (5), we will have // a strong UAF and we can control RIP q->classes[i].qdisc = NULL; WRITE_ONCE(q->classes[i].quantum, 0); q->classes[i].deficit = 0; gnet_stats_basic_sync_init(&q->classes[i].bstats); memset(&q->classes[i].qstats, 0, sizeof(q->classes[i].qstats)); } return 0; } Comment: This happens because some of the classes have their qdiscs assigned to NULL, but remain in the active list. This commit fixes this issue by always removing the class from the active list before deleting and freeing its associated qdisc Reproducer Steps (trimmed version of what was sent by zdi-disclosures@trendmicro.com) ``` DEV="${DEV:-lo}" ROOT_HANDLE="${ROOT_HANDLE:-1:}" BAND2_HANDLE="${BAND2_HANDLE:-20:}" # child under 1:2 PING_BYTES="${PING_BYTES:-48}" PING_COUNT="${PING_COUNT:-200000}" PING_DST="${PING_DST:-127.0.0.1}" SLOW_TBF_RATE="${SLOW_TBF_RATE:-8bit}" SLOW_TBF_BURST="${SLOW_TBF_BURST:-100b}" SLOW_TBF_LAT="${SLOW_TBF_LAT:-1s}" cleanup() { tc qdisc del dev "$DEV" root 2>/dev/null } trap cleanup EXIT ip link set "$DEV" up tc qdisc del dev "$DEV" root 2>/dev/null || true tc qdisc add dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 2 tc qdisc add dev "$DEV" parent 1:2 handle "$BAND2_HANDLE" \ tbf rate "$SLOW_TBF_RATE" burst "$SLOW_TBF_BURST" latency "$SLOW_TBF_LAT" tc filter add dev "$DEV" parent 1: protocol all prio 1 u32 match u32 0 0 flowid 1:2 tc -s qdisc ls dev $DEV ping -I "$DEV" -f -c "$PING_COUNT" -s "$PING_BYTES" -W 0.001 "$PING_DST" \ >/dev/null 2>&1 & tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 0 tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 2 tc -s qdisc ls dev $DEV tc qdisc del dev "$DEV" parent ---truncated--- | Jan 13, 2026 |
| CVE-2025-71064(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: net: hns3: using the num_tqps in the vf driver to apply for resources Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller than hdev->num_tqps, which causes some hdev->htqp[i] to remain uninitialized in hclgevf_knic_setup(). Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps, ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent and that all elements are properly initialized. | Jan 13, 2026 |
| CVE-2025-68822(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: Input: alps - fix use-after-free bugs caused by dev3_register_work The dev3_register_work delayed work item is initialized within alps_reconnect() and scheduled upon receipt of the first bare PS/2 packet from an external PS/2 device connected to the ALPS touchpad. During device detachment, the original implementation calls flush_workqueue() in psmouse_disconnect() to ensure completion of dev3_register_work. However, the flush_workqueue() in psmouse_disconnect() only blocks and waits for work items that were already queued to the workqueue prior to its invocation. Any work items submitted after flush_workqueue() is called are not included in the set of tasks that the flush operation awaits. This means that after flush_workqueue() has finished executing, the dev3_register_work could still be scheduled. Although the psmouse state is set to PSMOUSE_CMD_MODE in psmouse_disconnect(), the scheduling of dev3_register_work remains unaffected. The race condition can occur as follows: CPU 0 (cleanup path) | CPU 1 (delayed work) psmouse_disconnect() | psmouse_set_state() | flush_workqueue() | alps_report_bare_ps2_packet() alps_disconnect() | psmouse_queue_work() kfree(priv); // FREE | alps_register_bare_ps2_mouse() | priv = container_of(work...); // USE | priv->dev3 // USE Add disable_delayed_work_sync() in alps_disconnect() to ensure that dev3_register_work is properly canceled and prevented from executing after the alps_data structure has been deallocated. This bug is identified by static analysis. | Jan 13, 2026 |
| CVE-2025-68820(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ext4: xattr: fix null pointer deref in ext4_raw_inode() If ext4_get_inode_loc() fails (e.g. if it returns -EFSCORRUPTED), iloc.bh will remain set to NULL. Since ext4_xattr_inode_dec_ref_all() lacks error checking, this will lead to a null pointer dereference in ext4_raw_inode(), called right after ext4_get_inode_loc(). Found by Linux Verification Center (linuxtesting.org) with SVACE. | Jan 13, 2026 |
| CVE-2025-68819(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb: dtv5100: fix out-of-bounds in dtv5100_i2c_msg() rlen value is a user-controlled value, but dtv5100_i2c_msg() does not check the size of the rlen value. Therefore, if it is set to a value larger than sizeof(st->data), an out-of-bounds vuln occurs for st->data. Therefore, we need to add proper range checking to prevent this vuln. | Jan 13, 2026 |
| CVE-2025-68818(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: scsi: Revert "scsi: qla2xxx: Perform lockless command completion in abort path" This reverts commit 0367076b0817d5c75dfb83001ce7ce5c64d803a9. The commit being reverted added code to __qla2x00_abort_all_cmds() to call sp->done() without holding a spinlock. But unlike the older code below it, this new code failed to check sp->cmd_type and just assumed TYPE_SRB, which results in a jump to an invalid pointer in target-mode with TYPE_TGT_CMD: qla2xxx [0000:65:00.0]-d034:8: qla24xx_do_nack_work create sess success 0000000009f7a79b qla2xxx [0000:65:00.0]-5003:8: ISP System Error - mbx1=1ff5h mbx2=10h mbx3=0h mbx4=0h mbx5=191h mbx6=0h mbx7=0h. qla2xxx [0000:65:00.0]-d01e:8: -> fwdump no buffer qla2xxx [0000:65:00.0]-f03a:8: qla_target(0): System error async event 0x8002 occurred qla2xxx [0000:65:00.0]-00af:8: Performing ISP error recovery - ha=0000000058183fda. BUG: kernel NULL pointer dereference, address: 0000000000000000 PF: supervisor instruction fetch in kernel mode PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9446 Comm: qla2xxx_8_dpc Tainted: G O 6.1.133 #1 Hardware name: Supermicro Super Server/X11SPL-F, BIOS 4.2 12/15/2023 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc90001f93dc8 EFLAGS: 00010206 RAX: 0000000000000282 RBX: 0000000000000355 RCX: ffff88810d16a000 RDX: ffff88810dbadaa8 RSI: 0000000000080000 RDI: ffff888169dc38c0 RBP: ffff888169dc38c0 R08: 0000000000000001 R09: 0000000000000045 R10: ffffffffa034bdf0 R11: 0000000000000000 R12: ffff88810800bb40 R13: 0000000000001aa8 R14: ffff888100136610 R15: ffff8881070f7400 FS: 0000000000000000(0000) GS:ffff88bf80080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000010c8ff006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x4d/0x8b ? page_fault_oops+0x91/0x180 ? trace_buffer_unlock_commit_regs+0x38/0x1a0 ? exc_page_fault+0x391/0x5e0 ? asm_exc_page_fault+0x22/0x30 __qla2x00_abort_all_cmds+0xcb/0x3e0 [qla2xxx_scst] qla2x00_abort_all_cmds+0x50/0x70 [qla2xxx_scst] qla2x00_abort_isp_cleanup+0x3b7/0x4b0 [qla2xxx_scst] qla2x00_abort_isp+0xfd/0x860 [qla2xxx_scst] qla2x00_do_dpc+0x581/0xa40 [qla2xxx_scst] kthread+0xa8/0xd0 </TASK> Then commit 4475afa2646d ("scsi: qla2xxx: Complete command early within lock") added the spinlock back, because not having the lock caused a race and a crash. But qla2x00_abort_srb() in the switch below already checks for qla2x00_chip_is_down() and handles it the same way, so the code above the switch is now redundant and still buggy in target-mode. Remove it. | Jan 13, 2026 |
| CVE-2025-68817(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in ksmbd_tree_connect_put under concurrency Under high concurrency, A tree-connection object (tcon) is freed on a disconnect path while another path still holds a reference and later executes *_put()/write on it. | Jan 13, 2026 |
| CVE-2025-68816(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: fw_tracer, Validate format string parameters Add validation for format string parameters in the firmware tracer to prevent potential security vulnerabilities and crashes from malformed format strings received from firmware. The firmware tracer receives format strings from the device firmware and uses them to format trace messages. Without proper validation, bad firmware could provide format strings with invalid format specifiers (e.g., %s, %p, %n) that could lead to crashes, or other undefined behavior. Add mlx5_tracer_validate_params() to validate that all format specifiers in trace strings are limited to safe integer/hex formats (%x, %d, %i, %u, %llx, %lx, etc.). Reject strings containing other format types that could be used to access arbitrary memory or cause crashes. Invalid format strings are added to the trace output for visibility with "BAD_FORMAT: " prefix. | Jan 13, 2026 |
| CVE-2025-68815(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: Remove drr class from the active list if it changes to strict Whenever a user issues an ets qdisc change command, transforming a drr class into a strict one, the ets code isn't checking whether that class was in the active list and removing it. This means that, if a user changes a strict class (which was in the active list) back to a drr one, that class will be added twice to the active list [1]. Doing so with the following commands: tc qdisc add dev lo root handle 1: ets bands 2 strict 1 tc qdisc add dev lo parent 1:2 handle 20: \ tbf rate 8bit burst 100b latency 1s tc filter add dev lo parent 1: basic classid 1:2 ping -c1 -W0.01 -s 56 127.0.0.1 tc qdisc change dev lo root handle 1: ets bands 2 strict 2 tc qdisc change dev lo root handle 1: ets bands 2 strict 1 ping -c1 -W0.01 -s 56 127.0.0.1 Will trigger the following splat with list debug turned on: [ 59.279014][ T365] ------------[ cut here ]------------ [ 59.279452][ T365] list_add double add: new=ffff88801d60e350, prev=ffff88801d60e350, next=ffff88801d60e2c0. [ 59.280153][ T365] WARNING: CPU: 3 PID: 365 at lib/list_debug.c:35 __list_add_valid_or_report+0x17f/0x220 [ 59.280860][ T365] Modules linked in: [ 59.281165][ T365] CPU: 3 UID: 0 PID: 365 Comm: tc Not tainted 6.18.0-rc7-00105-g7e9f13163c13-dirty #239 PREEMPT(voluntary) [ 59.281977][ T365] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 59.282391][ T365] RIP: 0010:__list_add_valid_or_report+0x17f/0x220 [ 59.282842][ T365] Code: 89 c6 e8 d4 b7 0d ff 90 0f 0b 90 90 31 c0 e9 31 ff ff ff 90 48 c7 c7 e0 a0 22 9f 48 89 f2 48 89 c1 4c 89 c6 e8 b2 b7 0d ff 90 <0f> 0b 90 90 31 c0 e9 0f ff ff ff 48 89 f7 48 89 44 24 10 4c 89 44 ... [ 59.288812][ T365] Call Trace: [ 59.289056][ T365] <TASK> [ 59.289224][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.289546][ T365] ets_qdisc_change+0xd2b/0x1e80 [ 59.289891][ T365] ? __lock_acquire+0x7e7/0x1be0 [ 59.290223][ T365] ? __pfx_ets_qdisc_change+0x10/0x10 [ 59.290546][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.290898][ T365] ? __mutex_trylock_common+0xda/0x240 [ 59.291228][ T365] ? __pfx___mutex_trylock_common+0x10/0x10 [ 59.291655][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.291993][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.292313][ T365] ? trace_contention_end+0xc8/0x110 [ 59.292656][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.293022][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.293351][ T365] tc_modify_qdisc+0x63a/0x1cf0 Fix this by always checking and removing an ets class from the active list when changing it to strict. [1] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/tree/net/sched/sch_ets.c?id=ce052b9402e461a9aded599f5b47e76bc727f7de#n663 | Jan 13, 2026 |
| CVE-2025-68814(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: io_uring: fix filename leak in __io_openat_prep() __io_openat_prep() allocates a struct filename using getname(). However, for the condition of the file being installed in the fixed file table as well as having O_CLOEXEC flag set, the function returns early. At that point, the request doesn't have REQ_F_NEED_CLEANUP flag set. Due to this, the memory for the newly allocated struct filename is not cleaned up, causing a memory leak. Fix this by setting the REQ_F_NEED_CLEANUP for the request just after the successful getname() call, so that when the request is torn down, the filename will be cleaned up, along with other resources needing cleanup. | Jan 13, 2026 |
| CVE-2025-68811(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: svcrdma: use rc_pageoff for memcpy byte offset svc_rdma_copy_inline_range added rc_curpage (page index) to the page base instead of the byte offset rc_pageoff. Use rc_pageoff so copies land within the current page. Found by ZeroPath (https://zeropath.com) | Jan 13, 2026 |
| CVE-2025-68810(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: KVM: Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot Reject attempts to disable KVM_MEM_GUEST_MEMFD on a memslot that was initially created with a guest_memfd binding, as KVM doesn't support toggling KVM_MEM_GUEST_MEMFD on existing memslots. KVM prevents enabling KVM_MEM_GUEST_MEMFD, but doesn't prevent clearing the flag. Failure to reject the new memslot results in a use-after-free due to KVM not unbinding from the guest_memfd instance. Unbinding on a FLAGS_ONLY change is easy enough, and can/will be done as a hardening measure (in anticipation of KVM supporting dirty logging on guest_memfd at some point), but fixing the use-after-free would only address the immediate symptom. ================================================================== BUG: KASAN: slab-use-after-free in kvm_gmem_release+0x362/0x400 [kvm] Write of size 8 at addr ffff8881111ae908 by task repro/745 CPU: 7 UID: 1000 PID: 745 Comm: repro Not tainted 6.18.0-rc6-115d5de2eef3-next-kasan #3 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x51/0x60 print_report+0xcb/0x5c0 kasan_report+0xb4/0xe0 kvm_gmem_release+0x362/0x400 [kvm] __fput+0x2fa/0x9d0 task_work_run+0x12c/0x200 do_exit+0x6ae/0x2100 do_group_exit+0xa8/0x230 __x64_sys_exit_group+0x3a/0x50 x64_sys_call+0x737/0x740 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f581f2eac31 </TASK> Allocated by task 745 on cpu 6 at 9.746971s: kasan_save_stack+0x20/0x40 kasan_save_track+0x13/0x50 __kasan_kmalloc+0x77/0x90 kvm_set_memory_region.part.0+0x652/0x1110 [kvm] kvm_vm_ioctl+0x14b0/0x3290 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 745 on cpu 6 at 9.747467s: kasan_save_stack+0x20/0x40 kasan_save_track+0x13/0x50 __kasan_save_free_info+0x37/0x50 __kasan_slab_free+0x3b/0x60 kfree+0xf5/0x440 kvm_set_memslot+0x3c2/0x1160 [kvm] kvm_set_memory_region.part.0+0x86a/0x1110 [kvm] kvm_vm_ioctl+0x14b0/0x3290 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 | Jan 13, 2026 |
| CVE-2025-68809(opens NVD record) | Critical | 9.1 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: vfs: fix race on m_flags in vfs_cache ksmbd maintains delete-on-close and pending-delete state in ksmbd_inode->m_flags. In vfs_cache.c this field is accessed under inconsistent locking: some paths read and modify m_flags under ci->m_lock while others do so without taking the lock at all. Examples: - ksmbd_query_inode_status() and __ksmbd_inode_close() use ci->m_lock when checking or updating m_flags. - ksmbd_inode_pending_delete(), ksmbd_set_inode_pending_delete(), ksmbd_clear_inode_pending_delete() and ksmbd_fd_set_delete_on_close() used to read and modify m_flags without ci->m_lock. This creates a potential data race on m_flags when multiple threads open, close and delete the same file concurrently. In the worst case delete-on-close and pending-delete bits can be lost or observed in an inconsistent state, leading to confusing delete semantics (files that stay on disk after delete-on-close, or files that disappear while still in use). Fix it by: - Making ksmbd_query_inode_status() look at m_flags under ci->m_lock after dropping inode_hash_lock. - Adding ci->m_lock protection to all helpers that read or modify m_flags (ksmbd_inode_pending_delete(), ksmbd_set_inode_pending_delete(), ksmbd_clear_inode_pending_delete(), ksmbd_fd_set_delete_on_close()). - Keeping the existing ci->m_lock protection in __ksmbd_inode_close(), and moving the actual unlink/xattr removal outside the lock. This unifies the locking around m_flags and removes the data race while preserving the existing delete-on-close behaviour. | Jan 13, 2026 |
| CVE-2025-68808(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: media: vidtv: initialize local pointers upon transfer of memory ownership vidtv_channel_si_init() creates a temporary list (program, service, event) and ownership of the memory itself is transferred to the PAT/SDT/EIT tables through vidtv_psi_pat_program_assign(), vidtv_psi_sdt_service_assign(), vidtv_psi_eit_event_assign(). The problem here is that the local pointer where the memory ownership transfer was completed is not initialized to NULL. This causes the vidtv_psi_pmt_create_sec_for_each_pat_entry() function to fail, and in the flow that jumps to free_eit, the memory that was freed by vidtv_psi_*_table_destroy() can be accessed again by vidtv_psi_*_event_destroy() due to the uninitialized local pointer, so it is freed once again. Therefore, to prevent use-after-free and double-free vulnerability, local pointers must be initialized to NULL when transferring memory ownership. | Jan 13, 2026 |
| CVE-2025-68806(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix buffer validation by including null terminator size in EA length The smb2_set_ea function, which handles Extended Attributes (EA), was performing buffer validation checks that incorrectly omitted the size of the null terminating character (+1 byte) for EA Name. This patch fixes the issue by explicitly adding '+ 1' to EaNameLength where the null terminator is expected to be present in the buffer, ensuring the validation accurately reflects the total required buffer size. | Jan 13, 2026 |
| CVE-2025-68805(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: fuse: fix io-uring list corruption for terminated non-committed requests When a request is terminated before it has been committed, the request is not removed from the queue's list. This leaves a dangling list entry that leads to list corruption and use-after-free issues. Remove the request from the queue's list for terminated non-committed requests. | Jan 13, 2026 |
| CVE-2025-68803(opens NVD record) | High | 8.0 | In the Linux kernel, the following vulnerability has been resolved: NFSD: NFSv4 file creation neglects setting ACL An NFSv4 client that sets an ACL with a named principal during file creation retrieves the ACL afterwards, and finds that it is only a default ACL (based on the mode bits) and not the ACL that was requested during file creation. This violates RFC 8881 section 6.4.1.3: "the ACL attribute is set as given". The issue occurs in nfsd_create_setattr(), which calls nfsd_attrs_valid() to determine whether to call nfsd_setattr(). However, nfsd_attrs_valid() checks only for iattr changes and security labels, but not POSIX ACLs. When only an ACL is present, the function returns false, nfsd_setattr() is skipped, and the POSIX ACL is never applied to the inode. Subsequently, when the client retrieves the ACL, the server finds no POSIX ACL on the inode and returns one generated from the file's mode bits rather than returning the originally-specified ACL. | Jan 13, 2026 |
| CVE-2025-68801(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_router: Fix neighbour use-after-free We sometimes observe use-after-free when dereferencing a neighbour [1]. The problem seems to be that the driver stores a pointer to the neighbour, but without holding a reference on it. A reference is only taken when the neighbour is used by a nexthop. Fix by simplifying the reference counting scheme. Always take a reference when storing a neighbour pointer in a neighbour entry. Avoid taking a referencing when the neighbour is used by a nexthop as the neighbour entry associated with the nexthop already holds a reference. Tested by running the test that uncovered the problem over 300 times. Without this patch the problem was reproduced after a handful of iterations. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x2d4/0x310 Read of size 8 at addr ffff88817f8e3420 by task ip/3929 CPU: 3 UID: 0 PID: 3929 Comm: ip Not tainted 6.18.0-rc4-virtme-g36b21a067510 #3 PREEMPT(full) Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6e/0x300 print_report+0xfc/0x1fb kasan_report+0xe4/0x110 mlxsw_sp_neigh_entry_update+0x2d4/0x310 mlxsw_sp_router_rif_gone_sync+0x35f/0x510 mlxsw_sp_rif_destroy+0x1ea/0x730 mlxsw_sp_inetaddr_port_vlan_event+0xa1/0x1b0 __mlxsw_sp_inetaddr_lag_event+0xcc/0x130 __mlxsw_sp_inetaddr_event+0xf5/0x3c0 mlxsw_sp_router_netdevice_event+0x1015/0x1580 notifier_call_chain+0xcc/0x150 call_netdevice_notifiers_info+0x7e/0x100 __netdev_upper_dev_unlink+0x10b/0x210 netdev_upper_dev_unlink+0x79/0xa0 vrf_del_slave+0x18/0x50 do_set_master+0x146/0x7d0 do_setlink.isra.0+0x9a0/0x2880 rtnl_newlink+0x637/0xb20 rtnetlink_rcv_msg+0x6fe/0xb90 netlink_rcv_skb+0x123/0x380 netlink_unicast+0x4a3/0x770 netlink_sendmsg+0x75b/0xc90 __sock_sendmsg+0xbe/0x160 ____sys_sendmsg+0x5b2/0x7d0 ___sys_sendmsg+0xfd/0x180 __sys_sendmsg+0x124/0x1c0 do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [...] Allocated by task 109: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7b/0x90 __kmalloc_noprof+0x2c1/0x790 neigh_alloc+0x6af/0x8f0 ___neigh_create+0x63/0xe90 mlxsw_sp_nexthop_neigh_init+0x430/0x7e0 mlxsw_sp_nexthop_type_init+0x212/0x960 mlxsw_sp_nexthop6_group_info_init.constprop.0+0x81f/0x1280 mlxsw_sp_nexthop6_group_get+0x392/0x6a0 mlxsw_sp_fib6_entry_create+0x46a/0xfd0 mlxsw_sp_router_fib6_replace+0x1ed/0x5f0 mlxsw_sp_router_fib6_event_work+0x10a/0x2a0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Freed by task 154: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kmem_cache_free_bulk.part.0+0x1eb/0x5e0 kvfree_rcu_bulk+0x1f2/0x260 kfree_rcu_work+0x130/0x1b0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Last potentially related work creation: kasan_save_stack+0x30/0x50 kasan_record_aux_stack+0x8c/0xa0 kvfree_call_rcu+0x93/0x5b0 mlxsw_sp_router_neigh_event_work+0x67d/0x860 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 | Jan 13, 2026 |
| CVE-2025-68800(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_mr: Fix use-after-free when updating multicast route stats Cited commit added a dedicated mutex (instead of RTNL) to protect the multicast route list, so that it will not change while the driver periodically traverses it in order to update the kernel about multicast route stats that were queried from the device. One instance of list entry deletion (during route replace) was missed and it can result in a use-after-free [1]. Fix by acquiring the mutex before deleting the entry from the list and releasing it afterwards. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_mr_stats_update+0x4a5/0x540 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:1006 [mlxsw_spectrum] Read of size 8 at addr ffff8881523c2fa8 by task kworker/2:5/22043 CPU: 2 UID: 0 PID: 22043 Comm: kworker/2:5 Not tainted 6.18.0-rc1-custom-g1a3d6d7cd014 #1 PREEMPT(full) Hardware name: Mellanox Technologies Ltd. MSN2010/SA002610, BIOS 5.6.5 08/24/2017 Workqueue: mlxsw_core mlxsw_sp_mr_stats_update [mlxsw_spectrum] Call Trace: <TASK> dump_stack_lvl+0xba/0x110 print_report+0x174/0x4f5 kasan_report+0xdf/0x110 mlxsw_sp_mr_stats_update+0x4a5/0x540 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:1006 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 29933: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 mlxsw_sp_mr_route_add+0xd8/0x4770 [mlxsw_spectrum] mlxsw_sp_router_fibmr_event_work+0x371/0xad0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7965 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30 Freed by task 29933: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x43/0x70 kfree+0x14e/0x700 mlxsw_sp_mr_route_add+0x2dea/0x4770 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:444 [mlxsw_spectrum] mlxsw_sp_router_fibmr_event_work+0x371/0xad0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7965 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30 | Jan 13, 2026 |
| CVE-2025-68799(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: caif: fix integer underflow in cffrml_receive() The cffrml_receive() function extracts a length field from the packet header and, when FCS is disabled, subtracts 2 from this length without validating that len >= 2. If an attacker sends a malicious packet with a length field of 0 or 1 to an interface with FCS disabled, the subtraction causes an integer underflow. This can lead to memory exhaustion and kernel instability, potential information disclosure if padding contains uninitialized kernel memory. Fix this by validating that len >= 2 before performing the subtraction. | Jan 13, 2026 |
| CVE-2025-68798(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd: Check event before enable to avoid GPF On AMD machines cpuc->events[idx] can become NULL in a subtle race condition with NMI->throttle->x86_pmu_stop(). Check event for NULL in amd_pmu_enable_all() before enable to avoid a GPF. This appears to be an AMD only issue. Syzkaller reported a GPF in amd_pmu_enable_all. INFO: NMI handler (perf_event_nmi_handler) took too long to run: 13.143 msecs Oops: general protection fault, probably for non-canonical address 0xdffffc0000000034: 0000 PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000001a0-0x00000000000001a7] CPU: 0 UID: 0 PID: 328415 Comm: repro_36674776 Not tainted 6.12.0-rc1-syzk RIP: 0010:x86_pmu_enable_event (arch/x86/events/perf_event.h:1195 arch/x86/events/core.c:1430) RSP: 0018:ffff888118009d60 EFLAGS: 00010012 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000034 RSI: 0000000000000000 RDI: 00000000000001a0 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 R13: ffff88811802a440 R14: ffff88811802a240 R15: ffff8881132d8601 FS: 00007f097dfaa700(0000) GS:ffff888118000000(0000) GS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c0 CR3: 0000000103d56000 CR4: 00000000000006f0 Call Trace: <IRQ> amd_pmu_enable_all (arch/x86/events/amd/core.c:760 (discriminator 2)) x86_pmu_enable (arch/x86/events/core.c:1360) event_sched_out (kernel/events/core.c:1191 kernel/events/core.c:1186 kernel/events/core.c:2346) __perf_remove_from_context (kernel/events/core.c:2435) event_function (kernel/events/core.c:259) remote_function (kernel/events/core.c:92 (discriminator 1) kernel/events/core.c:72 (discriminator 1)) __flush_smp_call_function_queue (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/csd.h:64 kernel/smp.c:135 kernel/smp.c:540) __sysvec_call_function_single (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./arch/x86/include/asm/trace/irq_vectors.h:99 arch/x86/kernel/smp.c:272) sysvec_call_function_single (arch/x86/kernel/smp.c:266 (discriminator 47) arch/x86/kernel/smp.c:266 (discriminator 47)) </IRQ> | Jan 13, 2026 |
| CVE-2025-68795(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ethtool: Avoid overflowing userspace buffer on stats query The ethtool -S command operates across three ioctl calls: ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, and ETHTOOL_GSTATS for the values. If the number of stats changes between these calls (e.g., due to device reconfiguration), userspace's buffer allocation will be incorrect, potentially leading to buffer overflow. Drivers are generally expected to maintain stable stat counts, but some drivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, making this scenario possible. Some drivers try to handle this internally: - bnad_get_ethtool_stats() returns early in case stats.n_stats is not equal to the driver's stats count. - micrel/ksz884x also makes sure not to write anything beyond stats.n_stats and overflow the buffer. However, both use stats.n_stats which is already assigned with the value returned from get_sset_count(), hence won't solve the issue described here. Change ethtool_get_strings(), ethtool_get_stats(), ethtool_get_phy_stats() to not return anything in case of a mismatch between userspace's size and get_sset_size(), to prevent buffer overflow. The returned n_stats value will be equal to zero, to reflect that nothing has been returned. This could result in one of two cases when using upstream ethtool, depending on when the size change is detected: 1. When detected in ethtool_get_strings(): # ethtool -S eth2 no stats available 2. When detected in get stats, all stats will be reported as zero. Both cases are presumably transient, and a subsequent ethtool call should succeed. Other than the overflow avoidance, these two cases are very evident (no output/cleared stats), which is arguably better than presenting incorrect/shifted stats. I also considered returning an error instead of a "silent" response, but that seems more destructive towards userspace apps. Notes: - This patch does not claim to fix the inherent race, it only makes sure that we do not overflow the userspace buffer, and makes for a more predictable behavior. - RTNL lock is held during each ioctl, the race window exists between the separate ioctl calls when the lock is released. - Userspace ethtool always fills stats.n_stats, but it is likely that these stats ioctls are implemented in other userspace applications which might not fill it. The added code checks that it's not zero, to prevent any regressions. | Jan 13, 2026 |
| CVE-2025-68794(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: iomap: adjust read range correctly for non-block-aligned positions iomap_adjust_read_range() assumes that the position and length passed in are block-aligned. This is not always the case however, as shown in the syzbot generated case for erofs. This causes too many bytes to be skipped for uptodate blocks, which results in returning the incorrect position and length to read in. If all the blocks are uptodate, this underflows length and returns a position beyond the folio. Fix the calculation to also take into account the block offset when calculating how many bytes can be skipped for uptodate blocks. | Jan 13, 2026 |
| CVE-2025-68793(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix a job->pasid access race in gpu recovery Avoid a possible UAF in GPU recovery due to a race between the sched timeout callback and the tdr work queue. The gpu recovery function calls drm_sched_stop() and later drm_sched_start(). drm_sched_start() restarts the tdr queue which will eventually free the job. If the tdr queue frees the job before time out callback completes, the job will be freed and we'll get a UAF when accessing the pasid. Cache it early to avoid the UAF. Example KASAN trace: [ 493.058141] BUG: KASAN: slab-use-after-free in amdgpu_device_gpu_recover+0x968/0x990 [amdgpu] [ 493.067530] Read of size 4 at addr ffff88b0ce3f794c by task kworker/u128:1/323 [ 493.074892] [ 493.076485] CPU: 9 UID: 0 PID: 323 Comm: kworker/u128:1 Tainted: G E 6.16.0-1289896.2.zuul.bf4f11df81c1410bbe901c4373305a31 #1 PREEMPT(voluntary) [ 493.076493] Tainted: [E]=UNSIGNED_MODULE [ 493.076495] Hardware name: TYAN B8021G88V2HR-2T/S8021GM2NR-2T, BIOS V1.03.B10 04/01/2019 [ 493.076500] Workqueue: amdgpu-reset-dev drm_sched_job_timedout [gpu_sched] [ 493.076512] Call Trace: [ 493.076515] <TASK> [ 493.076518] dump_stack_lvl+0x64/0x80 [ 493.076529] print_report+0xce/0x630 [ 493.076536] ? _raw_spin_lock_irqsave+0x86/0xd0 [ 493.076541] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 493.076545] ? amdgpu_device_gpu_recover+0x968/0x990 [amdgpu] [ 493.077253] kasan_report+0xb8/0xf0 [ 493.077258] ? amdgpu_device_gpu_recover+0x968/0x990 [amdgpu] [ 493.077965] amdgpu_device_gpu_recover+0x968/0x990 [amdgpu] [ 493.078672] ? __pfx_amdgpu_device_gpu_recover+0x10/0x10 [amdgpu] [ 493.079378] ? amdgpu_coredump+0x1fd/0x4c0 [amdgpu] [ 493.080111] amdgpu_job_timedout+0x642/0x1400 [amdgpu] [ 493.080903] ? pick_task_fair+0x24e/0x330 [ 493.080910] ? __pfx_amdgpu_job_timedout+0x10/0x10 [amdgpu] [ 493.081702] ? _raw_spin_lock+0x75/0xc0 [ 493.081708] ? __pfx__raw_spin_lock+0x10/0x10 [ 493.081712] drm_sched_job_timedout+0x1b0/0x4b0 [gpu_sched] [ 493.081721] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 493.081725] process_one_work+0x679/0xff0 [ 493.081732] worker_thread+0x6ce/0xfd0 [ 493.081736] ? __pfx_worker_thread+0x10/0x10 [ 493.081739] kthread+0x376/0x730 [ 493.081744] ? __pfx_kthread+0x10/0x10 [ 493.081748] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 493.081751] ? __pfx_kthread+0x10/0x10 [ 493.081755] ret_from_fork+0x247/0x330 [ 493.081761] ? __pfx_kthread+0x10/0x10 [ 493.081764] ret_from_fork_asm+0x1a/0x30 [ 493.081771] </TASK> (cherry picked from commit 20880a3fd5dd7bca1a079534cf6596bda92e107d) | Jan 13, 2026 |
| CVE-2025-68792(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: tpm2-sessions: Fix out of range indexing in name_size 'name_size' does not have any range checks, and it just directly indexes with TPM_ALG_ID, which could lead into memory corruption at worst. Address the issue by only processing known values and returning -EINVAL for unrecognized values. Make also 'tpm_buf_append_name' and 'tpm_buf_fill_hmac_session' fallible so that errors are detected before causing any spurious TPM traffic. End also the authorization session on failure in both of the functions, as the session state would be then by definition corrupted. | Jan 13, 2026 |
| CVE-2025-68788(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: fsnotify: do not generate ACCESS/MODIFY events on child for special files inotify/fanotify do not allow users with no read access to a file to subscribe to events (e.g. IN_ACCESS/IN_MODIFY), but they do allow the same user to subscribe for watching events on children when the user has access to the parent directory (e.g. /dev). Users with no read access to a file but with read access to its parent directory can still stat the file and see if it was accessed/modified via atime/mtime change. The same is not true for special files (e.g. /dev/null). Users will not generally observe atime/mtime changes when other users read/write to special files, only when someone sets atime/mtime via utimensat(). Align fsnotify events with this stat behavior and do not generate ACCESS/MODIFY events to parent watchers on read/write of special files. The events are still generated to parent watchers on utimensat(). This closes some side-channels that could be possibly used for information exfiltration [1]. [1] https://snee.la/pdf/pubs/file-notification-attacks.pdf | Jan 13, 2026 |
| CVE-2025-68787(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: netrom: Fix memory leak in nr_sendmsg() syzbot reported a memory leak [1]. When function sock_alloc_send_skb() return NULL in nr_output(), the original skb is not freed, which was allocated in nr_sendmsg(). Fix this by freeing it before return. [1] BUG: memory leak unreferenced object 0xffff888129f35500 (size 240): comm "syz.0.17", pid 6119, jiffies 4294944652 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 10 52 28 81 88 ff ff ..........R(.... backtrace (crc 1456a3e4): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4983 [inline] slab_alloc_node mm/slub.c:5288 [inline] kmem_cache_alloc_node_noprof+0x36f/0x5e0 mm/slub.c:5340 __alloc_skb+0x203/0x240 net/core/skbuff.c:660 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0x69/0x3f0 net/core/skbuff.c:6671 sock_alloc_send_pskb+0x379/0x3e0 net/core/sock.c:2965 sock_alloc_send_skb include/net/sock.h:1859 [inline] nr_sendmsg+0x287/0x450 net/netrom/af_netrom.c:1105 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] sock_write_iter+0x293/0x2a0 net/socket.c:1195 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x45d/0x710 fs/read_write.c:686 ksys_write+0x143/0x170 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f | Jan 13, 2026 |
| CVE-2025-68785(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix middle attribute validation in push_nsh() action The push_nsh() action structure looks like this: OVS_ACTION_ATTR_PUSH_NSH(OVS_KEY_ATTR_NSH(OVS_NSH_KEY_ATTR_BASE,...)) The outermost OVS_ACTION_ATTR_PUSH_NSH attribute is OK'ed by the nla_for_each_nested() inside __ovs_nla_copy_actions(). The innermost OVS_NSH_KEY_ATTR_BASE/MD1/MD2 are OK'ed by the nla_for_each_nested() inside nsh_key_put_from_nlattr(). But nothing checks if the attribute in the middle is OK. We don't even check that this attribute is the OVS_KEY_ATTR_NSH. We just do a double unwrap with a pair of nla_data() calls - first time directly while calling validate_push_nsh() and the second time as part of the nla_for_each_nested() macro, which isn't safe, potentially causing invalid memory access if the size of this attribute is incorrect. The failure may not be noticed during validation due to larger netlink buffer, but cause trouble later during action execution where the buffer is allocated exactly to the size: BUG: KASAN: slab-out-of-bounds in nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch] Read of size 184 at addr ffff88816459a634 by task a.out/22624 CPU: 8 UID: 0 PID: 22624 6.18.0-rc7+ #115 PREEMPT(voluntary) Call Trace: <TASK> dump_stack_lvl+0x51/0x70 print_address_description.constprop.0+0x2c/0x390 kasan_report+0xdd/0x110 kasan_check_range+0x35/0x1b0 __asan_memcpy+0x20/0x60 nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch] push_nsh+0x82/0x120 [openvswitch] do_execute_actions+0x1405/0x2840 [openvswitch] ovs_execute_actions+0xd5/0x3b0 [openvswitch] ovs_packet_cmd_execute+0x949/0xdb0 [openvswitch] genl_family_rcv_msg_doit+0x1d6/0x2b0 genl_family_rcv_msg+0x336/0x580 genl_rcv_msg+0x9f/0x130 netlink_rcv_skb+0x11f/0x370 genl_rcv+0x24/0x40 netlink_unicast+0x73e/0xaa0 netlink_sendmsg+0x744/0xbf0 __sys_sendto+0x3d6/0x450 do_syscall_64+0x79/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Let's add some checks that the attribute is properly sized and it's the only one attribute inside the action. Technically, there is no real reason for OVS_KEY_ATTR_NSH to be there, as we know that we're pushing an NSH header already, it just creates extra nesting, but that's how uAPI works today. So, keeping as it is. | Jan 13, 2026 |
| CVE-2025-68782(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: scsi: target: Reset t_task_cdb pointer in error case If allocation of cmd->t_task_cdb fails, it remains NULL but is later dereferenced in the 'err' path. In case of error, reset NULL t_task_cdb value to point at the default fixed-size buffer. Found by Linux Verification Center (linuxtesting.org) with SVACE. | Jan 13, 2026 |
| CVE-2025-68776(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: net/hsr: fix NULL pointer dereference in prp_get_untagged_frame() prp_get_untagged_frame() calls __pskb_copy() to create frame->skb_std but doesn't check if the allocation failed. If __pskb_copy() returns NULL, skb_clone() is called with a NULL pointer, causing a crash: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 0 UID: 0 PID: 5625 Comm: syz.1.18 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:skb_clone+0xd7/0x3a0 net/core/skbuff.c:2041 Code: 03 42 80 3c 20 00 74 08 4c 89 f7 e8 23 29 05 f9 49 83 3e 00 0f 85 a0 01 00 00 e8 94 dd 9d f8 48 8d 6b 7e 49 89 ee 49 c1 ee 03 <43> 0f b6 04 26 84 c0 0f 85 d1 01 00 00 44 0f b6 7d 00 41 83 e7 0c RSP: 0018:ffffc9000d00f200 EFLAGS: 00010207 RAX: ffffffff892235a1 RBX: 0000000000000000 RCX: ffff88803372a480 RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000000 RBP: 000000000000007e R08: ffffffff8f7d0f77 R09: 1ffffffff1efa1ee R10: dffffc0000000000 R11: fffffbfff1efa1ef R12: dffffc0000000000 R13: 0000000000000820 R14: 000000000000000f R15: ffff88805144cc00 FS: 0000555557f6d500(0000) GS:ffff88808d72f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555581d35808 CR3: 000000005040e000 CR4: 0000000000352ef0 Call Trace: <TASK> hsr_forward_do net/hsr/hsr_forward.c:-1 [inline] hsr_forward_skb+0x1013/0x2860 net/hsr/hsr_forward.c:741 hsr_handle_frame+0x6ce/0xa70 net/hsr/hsr_slave.c:84 __netif_receive_skb_core+0x10b9/0x4380 net/core/dev.c:5966 __netif_receive_skb_one_core net/core/dev.c:6077 [inline] __netif_receive_skb+0x72/0x380 net/core/dev.c:6192 netif_receive_skb_internal net/core/dev.c:6278 [inline] netif_receive_skb+0x1cb/0x790 net/core/dev.c:6337 tun_rx_batched+0x1b9/0x730 drivers/net/tun.c:1485 tun_get_user+0x2b65/0x3e90 drivers/net/tun.c:1953 tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x5c9/0xb30 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0449f8e1ff Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 f9 92 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 4c 93 02 00 48 RSP: 002b:00007ffd7ad94c90 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f044a1e5fa0 RCX: 00007f0449f8e1ff RDX: 000000000000003e RSI: 0000200000000500 RDI: 00000000000000c8 RBP: 00007ffd7ad94d20 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000003e R11: 0000000000000293 R12: 0000000000000001 R13: 00007f044a1e5fa0 R14: 00007f044a1e5fa0 R15: 0000000000000003 </TASK> Add a NULL check immediately after __pskb_copy() to handle allocation failures gracefully. | Jan 13, 2026 |
| CVE-2025-68775(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: net/handshake: duplicate handshake cancellations leak socket When a handshake request is cancelled it is removed from the handshake_net->hn_requests list, but it is still present in the handshake_rhashtbl until it is destroyed. If a second cancellation request arrives for the same handshake request, then remove_pending() will return false... and assuming HANDSHAKE_F_REQ_COMPLETED isn't set in req->hr_flags, we'll continue processing through the out_true label, where we put another reference on the sock and a refcount underflow occurs. This can happen for example if a handshake times out - particularly if the SUNRPC client sends the AUTH_TLS probe to the server but doesn't follow it up with the ClientHello due to a problem with tlshd. When the timeout is hit on the server, the server will send a FIN, which triggers a cancellation request via xs_reset_transport(). When the timeout is hit on the client, another cancellation request happens via xs_tls_handshake_sync(). Add a test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED) in the pending cancel path so duplicate cancels can be detected. | Jan 13, 2026 |
| CVE-2025-68774(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix missing hfs_bnode_get() in __hfs_bnode_create When sync() and link() are called concurrently, both threads may enter hfs_bnode_find() without finding the node in the hash table and proceed to create it. Thread A: hfsplus_write_inode() -> hfsplus_write_system_inode() -> hfs_btree_write() -> hfs_bnode_find(tree, 0) -> __hfs_bnode_create(tree, 0) Thread B: hfsplus_create_cat() -> hfs_brec_insert() -> hfs_bnode_split() -> hfs_bmap_alloc() -> hfs_bnode_find(tree, 0) -> __hfs_bnode_create(tree, 0) In this case, thread A creates the bnode, sets refcnt=1, and hashes it. Thread B also tries to create the same bnode, notices it has already been inserted, drops its own instance, and uses the hashed one without getting the node. ``` node2 = hfs_bnode_findhash(tree, cnid); if (!node2) { <- Thread A hash = hfs_bnode_hash(cnid); node->next_hash = tree->node_hash[hash]; tree->node_hash[hash] = node; tree->node_hash_cnt++; } else { <- Thread B spin_unlock(&tree->hash_lock); kfree(node); wait_event(node2->lock_wq, !test_bit(HFS_BNODE_NEW, &node2->flags)); return node2; } ``` However, hfs_bnode_find() requires each call to take a reference. Here both threads end up setting refcnt=1. When they later put the node, this triggers: BUG_ON(!atomic_read(&node->refcnt)) In this scenario, Thread B in fact finds the node in the hash table rather than creating a new one, and thus must take a reference. Fix this by calling hfs_bnode_get() when reusing a bnode newly created by another thread to ensure the refcount is updated correctly. A similar bug was fixed in HFS long ago in commit a9dc087fd3c4 ("fix missing hfs_bnode_get() in __hfs_bnode_create") but the same issue remained in HFS+ until now. | Jan 13, 2026 |
| CVE-2025-68773(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: spi: fsl-cpm: Check length parity before switching to 16 bit mode Commit fc96ec826bce ("spi: fsl-cpm: Use 16 bit mode for large transfers with even size") failed to make sure that the size is really even before switching to 16 bit mode. Until recently the problem went unnoticed because kernfs uses a pre-allocated bounce buffer of size PAGE_SIZE for reading EEPROM. But commit 8ad6249c51d0 ("eeprom: at25: convert to spi-mem API") introduced an additional dynamically allocated bounce buffer whose size is exactly the size of the transfer, leading to a buffer overrun in the fsl-cpm driver when that size is odd. Add the missing length parity verification and remain in 8 bit mode when the length is not even. | Jan 13, 2026 |
| CVE-2025-68770(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix XDP_TX path For XDP_TX action in bnxt_rx_xdp(), clearing of the event flags is not correct. __bnxt_poll_work() -> bnxt_rx_pkt() -> bnxt_rx_xdp() may be looping within NAPI and some event flags may be set in earlier iterations. In particular, if BNXT_TX_EVENT is set earlier indicating some XDP_TX packets are ready and pending, it will be cleared if it is XDP_TX action again. Normally, we will set BNXT_TX_EVENT again when we successfully call __bnxt_xmit_xdp(). But if the TX ring has no more room, the flag will not be set. This will cause the TX producer to be ahead but the driver will not hit the TX doorbell. For multi-buf XDP_TX, there is no need to clear the event flags and set BNXT_AGG_EVENT. The BNXT_AGG_EVENT flag should have been set earlier in bnxt_rx_pkt(). The visible symptom of this is that the RX ring associated with the TX XDP ring will eventually become empty and all packets will be dropped. Because this condition will cause the driver to not refill the RX ring seeing that the TX ring has forever pending XDP_TX packets. The fix is to only clear BNXT_RX_EVENT when we have successfully called __bnxt_xmit_xdp(). | Jan 13, 2026 |
| CVE-2025-66698(opens NVD record) | High | 8.6 | An issue in Semantic machines v5.4.8 allows attackers to bypass authentication via sending a crafted HTTP request to various API endpoints. | Jan 13, 2026 |
| CVE-2025-65783(opens NVD record) | Critical | 9.8 | An arbitrary file upload vulnerability in the /utils/uploadFile component of Hubert Imoveis e Administracao Ltda Hub v2.0 1.27.3 allows attackers to execute arbitrary code via uploading a crafted PDF file. | Jan 13, 2026 |
| CVE-2024-54855(opens NVD record) | Medium | 6.4 | fabricators Ltd Vanilla OS 2 Core image v1.1.0 was discovered to contain static keys for the SSH service, allowing attackers to possibly execute a man-in-the-middle attack during connections with other hosts. | Jan 13, 2026 |
| CVE-2025-55462(opens NVD record) | Medium | 6.5 | A CORS misconfiguration in Eramba Community and Enterprise Editions v3.26.0 allows an attacker-controlled Origin header to be reflected in the Access-Control-Allow-Origin response along with Access-Control-Allow-Credentials: true. This permits malicious third-party websites to perform authenticated cross-origin requests against the Eramba API, including endpoints like /system-api/login and /system-api/user/me. The response includes sensitive user session data (ID, name, email, access groups), which is accessible to the attacker's JavaScript. This flaw enables full session hijack and data exfiltration without user interaction. Eramba versions 3.23.3 and earlier were tested and appear unaffected. The vulnerability is present in default installations, requiring no custom configuration. | Jan 13, 2026 |
| CVE-2025-13447(opens NVD record) | High | 8.4 | OS Command Injection Remote Code Execution Vulnerability in API in Progress LoadMaster allows an authenticated attacker with “User Administration” permissions to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in the API input parameters | Jan 13, 2026 |
| CVE-2025-13444(opens NVD record) | High | 8.4 | OS Command Injection Remote Code Execution Vulnerability in API in Progress LoadMaster allows an authenticated attacker with “User Administration” permissions to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in the API input parameters | Jan 13, 2026 |
| CVE-2026-0891(opens NVD record) | High | 8.1 | Memory safety bugs present in Firefox ESR 140.6, Thunderbird ESR 140.6, Firefox 146 and Thunderbird 146. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 147, Firefox ESR 140.7, Thunderbird 147, and Thunderbird 140.7. | Jan 13, 2026 |
| CVE-2026-0882(opens NVD record) | High | 8.8 | Use-after-free in the IPC component. This vulnerability was fixed in Firefox 147, Firefox ESR 115.32, Firefox ESR 140.7, Thunderbird 147, and Thunderbird 140.7. | Jan 13, 2026 |
| CVE-2026-0881(opens NVD record) | Critical | 10.0 | Sandbox escape in the Messaging System component. This vulnerability was fixed in Firefox 147 and Thunderbird 147. | Jan 13, 2026 |