Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
48,364 matching · page 389/968Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-64243(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: simple-mux: Fix enum control bounds check simple_mux_control_put() rejects values greater than e->items, but enum control values are zero based. For the two-entry mux used by this driver, valid values are 0 and 1, so value 2 must be rejected as well. Accepting e->items can store an invalid mux state, pass it to the GPIO setter, and pass it on to the DAPM mux update path where it is used as an index into the enum text array. Use the same >= e->items check used by the ASoC enum helpers. | Jul 24, 2026 |
| CVE-2026-64242(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: net2280: Fix double free in probe error path usb_initialize_gadget() installs gadget_release() as the release callback for the embedded gadget device. The struct net2280 instance is therefore released through gadget_release() when the gadget device's last reference is dropped. The probe error path calls net2280_remove(), which tears down the partially initialized device and drops the gadget reference with usb_put_gadget(). Calling kfree(dev) afterwards can free the same object again. Drop the explicit kfree() and let the gadget device release callback handle the final free. This issue was found by a static analysis tool I am developing. | Jul 24, 2026 |
| CVE-2026-64241(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: gpio: rockchip: teardown bugs and resource leaks Address several teardown issues and resource leaks in the driver's remove path and error handling: 1. Debounce clock reference leak: The debounce clock (bank->db_clk) is obtained using of_clk_get() which increments the clock's reference count, but clk_put() is never called. Register a devm action to cleanly release it on unbind. Note that of_clk_get(..., 1) remains necessary over devm_clk_get() because the DT binding does not define clock-names, precluding name-based lookup. 2. Unregistered chained IRQ handler: The chained IRQ handler is not disconnected in remove(). If a stray interrupt fires after the driver is removed, the kernel attempts to execute a stale handler, leading to a panic. Fix this by clearing the handler in remove(). 3. IRQ domain leak: The linear IRQ domain and its generic chips are allocated manually during probe but never removed. Remove the IRQ domain during driver teardown to free the associated generic chips and mappings. [Bartosz: don't emit an error message on devres allocation failure] | Jul 24, 2026 |
| CVE-2026-64240(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: media: rc: igorplugusb: fix control request setup packet Commit eac69475b01f ("media: rc: igorplugusb: heed coherency rules") changed the control request storage from an embedded struct to an allocated pointer so it can obey DMA coherency rules. However, the driver still passes &ir->request to usb_fill_control_urb(). That points the URB setup packet at the pointer field itself rather than at the allocated struct usb_ctrlrequest. USB core then interprets pointer bytes as the setup packet. This can produce an invalid bRequestType and trigger the control direction warning reported by syzbot: usb 2-1: BOGUS control dir, pipe 80003580 doesn't match bRequestType 0 Pass ir->request itself as the setup packet. | Jul 24, 2026 |
| CVE-2026-64239(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: delete tried region in regions_rmdirs() DAMON sysfs maintains the DAMOS tried region directory objects via a linked list. When the user requests refresh of the directories, DAMON sysfs removes all the region directories first, and then generate updated regions directory on the empty space. The removal function (damon_sysfs_scheme_regions_rm_dirs()) only puts the kobj objects. Deletion of the container region object from the linked list is done inside the kobj release callback function. If somehow the callback invocation is delayed, the list will contain regions list that gonna be freed. If the updated region directories creation is started in this situation, the list can be corrupted and use-after-free can happen. Because the kobj objects are managed by only DAMON sysfs, the issue cannot happen in normal situation. But, such delays can be made on kernels that built with CONFIG_DEBUG_KOBJECT_RELEASE. On the kernel, the issue can indeed be reproduced like below. # damo start --damos_action stat # cd /sys/kernel/mm/damon/admin/kdamonds/0/ # for i in {1..10}; do echo update_schemes_tried_regions > state; done # dmesg | grep underflow [ 89.296152] refcount_t: underflow; use-after-free. Fix the issue by removing the region object from the list when decrementing the reference count. Also update damos_sysfs_populate_region_dir() to add the region object to the list only after the kobject_init_and_add() is success, so that fail of kobject_init_and_add() is not leaving the deallocated object on the list. The issue was discovered [1] by Sashiko. | Jul 24, 2026 |
| CVE-2026-64238(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: gpio: shared: fix deadlock on shared proxy's parent removal Commit 710abda58055 ("gpio: shared: call gpio_chip::of_xlate() if set") used the mutex embedded in struct gpio_shared_entry to protect the offset field which now can be modified after assignment. The critical section however is too wide and introduced a potential deadlock on the removal of the shared GPIO proxy's parent. Make the critical section shorter - only protect the offset when it's being read. While at it: mention the fact that the entry lock is now also used to protect against concurrent access to the offset field in the structure's documentation. | Jul 24, 2026 |
| CVE-2026-64237(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: Input: elan_i2c - validate firmware size before use Ensure that the firmware file is large enough to contain the expected number of pages and the signature (which resides at the end of the firmware blob) before accessing them to prevent potential out-of-bounds reads. | Jul 24, 2026 |
| CVE-2026-64236(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: i2c: davinci: fix division by zero on missing clock-frequency When the 'clock-frequency' property is missing from the device tree, the driver falls back to DAVINCI_I2C_DEFAULT_BUS_FREQ. However, this macro was defined in kHz (100), whereas the device tree property is expected in Hz. The probe function divided the fallback value by 1000, causing integer truncation that resulted in dev->bus_freq = 0. This triggered a deterministic division-by-zero kernel panic when calculating clock dividers later in the probe sequence. Fix this by redefining DAVINCI_I2C_DEFAULT_BUS_FREQ in Hz (100000) to match the expected device tree property unit, allowing the existing division logic to work correctly for both cases. | Jul 24, 2026 |
| CVE-2026-64235(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform (eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline crashes on the first call into the traced function: BUG: unable to handle page fault for address: ffff88817ae18880 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 4b53067 P4D 4b53067 PUD 0 Oops: Oops: 0002 [#1] SMP PTI CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89 Call Trace: <TASK> ? find_held_lock ? exc_page_fault ? lock_release ? __x64_sys_clock_nanosleep ? lockdep_hardirqs_on_prepare ? trace_hardirqs_on __x64_sys_clock_nanosleep do_syscall_64 ? exc_page_fault ? call_depth_return_thunk entry_SYSCALL_64_after_hwframe ... Kernel panic - not syncing: Fatal exception This small reproducer allows to easily trigger the crash: # echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events # echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable # usleep 1 Monitoring the crash under GDB points to the exact instruction in charge of incrementing the call depth: sarq $5, %gs:__x86_call_depth(%rip) This instruction matches the one inserted by the ftrace_regs_caller from ftrace_64.S. This emitted code was likely working fine until the introduction of 59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"): it has made the call depth accounting addressing relative to $rip, instead of being based on an absolute address. As this code exact location depends on where the trampoline lives in memory, the corresponding displacement needs to be adjusted at runtime to actually correctly find the per-cpu __x86_call_depth value, otherwise the targeted address is wrong, leading to the page fault seen above. Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(), as it is done for example by the x86 BPF JIT compiler through x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots, in ftrace_caller and ftrace_regs_caller. [ bp: Massage. ] | Jul 24, 2026 |
| CVE-2026-64234(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: tty: serial: pch_uart: add check for dma_alloc_coherent() Add a check for dma_alloc_coherent() failure to prevent a potential NULL pointer dereference in dma_handle_rx(). Properly release DMA channels and the PCI device reference using a goto ladder if the allocation fails. | Jul 24, 2026 |
| CVE-2026-64233(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind uvc_function_bind() walks &opts->extension_units twice without holding opts->lock: - directly, for the iExtension string-descriptor fixup loop; - indirectly, four times via uvc_copy_descriptors() (once per speed), where the helper iterates uvc->desc.extension_units (which aliases &opts->extension_units) to size and emit XU descriptors. The configfs side (uvcg_extension_make / uvcg_extension_drop, in drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its list_add_tail / list_del operations. A privileged userspace process that holds the configfs subtree open and writes the gadget UDC name to bind the function while concurrently rmdir()'ing an extensions subdir can race uvcg_extension_drop() against the bind-time list walks and dereference a freed struct uvcg_extension. Hold opts->lock from the start of the XU string-descriptor fixup through the last uvc_copy_descriptors() call, releasing on the descriptor-error path via a new error_unlock label that drops the lock before falling through to the existing error label. This matches the locking discipline of the configfs callbacks and removes the only remaining unsynchronised reader of the XU list during bind. Reachability: only privileged processes that can mount configfs and write to gadget UDC files can trigger the race, so this is a correctness fix rather than a security boundary. | Jul 24, 2026 |
| CVE-2026-64232(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: block: recompute nr_integrity_segments in blk_insert_cloned_request blk_insert_cloned_request() already recomputes nr_phys_segments against the bottom queue, because "the queue settings related to segment counting may differ from the original queue." The exact same reasoning applies to integrity segments: a stacked driver's underlying queue can have tighter virt_boundary_mask, seg_boundary_mask, or max_segment_size than the top queue, in which case blk_rq_count_integrity_sg() against the bottom queue produces a different count than the cached rq->nr_integrity_segments inherited from the source request by blk_rq_prep_clone(). When the cached count is lower than the bottom queue's actual count, blk_rq_map_integrity_sg() trips BUG_ON(segments > rq->nr_integrity_segments); on dispatch. The same families of stacked setups that motivated the existing nr_phys_segments recompute -- dm-multipath fanning out to nvme-rdma in particular -- can produce this. Mirror the nr_phys_segments handling: when the request carries integrity, recompute nr_integrity_segments against the bottom queue and reject the request if it exceeds the bottom queue's max_integrity_segments. blk_rq_count_integrity_sg() and queue_max_integrity_segments() are both already available via <linux/blk-integrity.h>, which blk-mq.c includes. This closes a latent gap in the stacking contract and brings the integrity-segment accounting in line with the existing phys-segment accounting. | Jul 24, 2026 |
| CVE-2026-64231(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: don't dump registers past the mapped region On DSI 6G platforms the IO address space is internally adjusted by io_offset. Later this adjusted address might be used for memory dumping. However the size that is used for memory dumping isn't adjusted to account for the io_offset, leading to the potential access to the unmapped region. Lower ctrl_size by the io_offset value to prevent access past the mapped area. msm_disp_snapshot_add_block+0x1d4/0x3c8 [msm] (P) msm_dsi_host_snapshot+0x4c/0x78 [msm] msm_dsi_snapshot+0x28/0x50 [msm] msm_disp_snapshot_capture_state+0x74/0x140 [msm] msm_disp_snapshot_state_sync+0x60/0x90 [msm] _msm_disp_snapshot_work+0x30/0x90 [msm] kthread_worker_fn+0xdc/0x460 kthread+0x120/0x140 Patchwork: https://patchwork.freedesktop.org/patch/721747/ | Jul 24, 2026 |
| CVE-2026-64230(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: regulator: tps65219: fix irq_data.rdev not being assigned Commit 64a6b577490c ("regulator: tps65219: Remove debugging helper function") removed the tps65219_get_rdev_by_name() helper along with the irq_data.rdev assignment that depended on it. This left irq_data.rdev uninitialized for all IRQs, causing undefined behavior when regulator_notifier_call_chain() is called from the IRQ handler: Internal error: Oops: 0000000096000004 pc : regulator_notifier_call_chain lr : tps65219_regulator_irq_handler Call trace: regulator_notifier_call_chain tps65219_regulator_irq_handler handle_nested_irq regmap_irq_thread irq_thread_fn irq_thread kthread ret_from_fork Instead of restoring a dedicated lookup array, restructure the probe function to combine regulator registration with IRQ registration in the same loop. This way the rdev returned by devm_regulator_register() is naturally available for assigning to irq_data.rdev without any auxiliary data structure. Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any registered regulator are registered with rdev=NULL, and the IRQ handler is protected with a NULL check to avoid crashing. | Jul 24, 2026 |
| CVE-2026-64229(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: x86/mm: Disable broadcast TLB flush when PCID is disabled Booting with "nopcid" clears X86_FEATURE_PCID and keeps CR4.PCIDE from being set to one. On AMD CPUs that support INVLPGB, broadcast TLB flushing remains enabled. There are two checks that decide whether the global ASID code runs, mm_global_asid() and consider_global_asid(), that key off of the X86_FEATURE_INVLPGB feature. Once an mm becomes active on more than three CPUs, consider_global_asid() assigns it a global ASID, after which flush_tlb_mm_range() takes the broadcast_tlb_flush() path using a non-zero PCID. Issuing an INVLPGB with a non-zero PCID while CR4.PCIDE is not set results in a #GP: Oops: general protection fault, kernel NULL pointer dereference 0x1: 0000 [#1] SMP NOPTI CPU: 158 UID: 0 PID: 3119 Comm: snap Not tainted 7.1.0-rc3 #1 PREEMPT(full) Hardware name: ... RIP: 0010:broadcast_tlb_flush Code: ... 89 da 48 83 c8 07 <0f> 01 fe eb 08 cc cc cc ... Call Trace: <TASK> flush_tlb_mm_range ptep_clear_flush wp_page_copy ? _raw_spin_unlock __handle_mm_fault handle_mm_fault do_user_addr_fault exc_page_fault asm_exc_page_fault All processors that support broadcast TLB invalidation also have PCID support, so it is only the "nopcid" scenario that is of concern. In this situation just disable the broadcast TLB support using the CPUID dependency support by making X86_FEATURE_INVLPGB dependent on X86_FEATURE_PCID. [ bp: Massage commit message. ] | Jul 24, 2026 |
| CVE-2026-64228(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: net: ethtool: phy: avoid NULL deref when PHY driver is unbound phydev->drv can become NULL while the phy_device is still attached to its net_device, namely after the PHY driver is unbound via sysfs: echo <mdio_id> > /sys/bus/mdio_bus/drivers/<phy_drv>/unbind phy_remove() clears phydev->drv but doesn't call phy_detach(), so the phy_device stays in the link topology xarray and ethnl_req_get_phydev() still hands it back. ETHTOOL_MSG_PHY_GET then oopses on: rep_data->drvname = kstrdup(phydev->drv->name, GFP_KERNEL); drvname is already treated as optional by phy_reply_size(), phy_fill_reply() and phy_cleanup_data(), so just skip the allocation when there is no driver bound. | Jul 24, 2026 |
| CVE-2026-64227(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: ACPI: driver: Check ACPI_COMPANION() against NULL during probe Since every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), platform drivers that rely on the existence of a device's ACPI companion object should verify its presence. Accordingly, add requisite ACPI_COMPANION() or ACPI_HANDLE() checks against NULL to 13 platform drivers handling core ACPI devices. Also change the value returned by the ACPI thermal zone driver when the device's ACPI companion is not present to -ENODEV for consistency with the other drivers. | Jul 24, 2026 |
| CVE-2026-64226(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: sched_ext: Avoid UAF in scx_root_enable_workfn() init failure path In scx_root_enable_workfn(), put_task_struct(p) is called before scx_error() dereferences p->comm and p->pid. If the iterator's reference is the last drop, the task is freed synchronously and the deref becomes a UAF. Move put_task_struct() past scx_error(). | Jul 24, 2026 |
| CVE-2026-64225(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: CGX: add bounds check to cgx_speed_mbps index cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values 0-15. If it returns a value >= 13, this causes an out-of-bounds array access. Add a bounds check and default to speed 0 if the index is out of range. | Jul 24, 2026 |
| CVE-2026-64224(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix double free in rvu_rep_rsrc_init() rvu_rep_rsrc_init() allocates queue memory before calling otx2_init_hw_resources(). When hardware resource setup fails, otx2_init_hw_resources() already unwinds the partially initialized SQ, CQ, and aura state before returning an error. The representor error path then calls otx2_free_hw_resources() again and can free the same resources a second time. Fix this by splitting the cleanup labels so that a failure from otx2_init_hw_resources() only releases queue memory. Keep the otx2_free_hw_resources() call for failures that happen after hardware resource initialization completed successfully. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime validation was not performed because reproducing this path requires OcteonTX2 representor hardware. | Jul 24, 2026 |
| CVE-2026-64223(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: consume only present negotiated TTLM maps ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements against the number of link-map entries indicated by link_map_presence. ieee80211_parse_neg_ttlm() must consume the same layout. The parser advanced its cursor for every TID, including TIDs whose presence bit is clear and therefore have no map bytes in the element. A sparse map can then make a later present TID read past the validated element. The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by valid_links before being applied to driver state, so a peer cannot turn the read into a policy change. Under KUnit + KASAN with an exact-sized element allocation the OOB read is reported as a slab-out-of-bounds; whether the same trigger fires under the production RX path depends on surrounding allocator state. Advance the cursor only when the current TID has a map present. | Jul 24, 2026 |
| CVE-2026-64222(opens NVD record) | High | 7.0 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: avoid double free of pool->stack on AQ init failure otx2_pool_aq_init() frees pool->stack when mailbox sync or retry allocation fails, but leaves the pointer unchanged. Later, otx2_sq_aura_pool_init() unwinds the partial setup through otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific cn20k_pool_aq_init() implementation has the same bug in its corresponding error path. Set pool->stack to NULL immediately after the local free so the shared cleanup path does not free the same stack again while cleaning up partially initialized pool state. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime validation was not performed because reproducing this path requires OcteonTX2/CN20K hardware. | Jul 24, 2026 |
| CVE-2026-64221(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: spi: ti-qspi: fix use-after-free after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to clear the DMA channel pointer also if buffer allocation fails to avoid passing a pointer to the released channel to the DMA engine (or trying to free the channel a second time on late probe errors or driver unbind). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. | Jul 24, 2026 |
| CVE-2026-64220(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: device property: set fwnode->secondary to NULL in fwnode_init() If a firmware node is allocated on the stack (for instance: temporary software node whose life-time we control) or on the heap - but using a non-zeroing allocation function - and initialized using fwnode_init(), its secondary pointer will contain uninitalized memory which likely will be neither NULL nor IS_ERR() and so may end up being dereferenced (for example: in dev_to_swnode()). Set fwnode->secondary to NULL on initialization. | Jul 24, 2026 |
| CVE-2026-64219(opens NVD record) | High | 7.0 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async [Why&How] dc_process_dmub_aux_transfer_async() copies payload->length bytes into a 16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which is a no-op in release builds. If a caller ever passes length > 16 this results in a stack buffer overflow via memcpy. Additionally, link_index is used to dereference dc->links[] without bounds checking against dc->link_count, risking an out-of-bounds access. Replace the ASSERT with a hard runtime check that returns false when payload->length exceeds the destination buffer size, and add a bounds check for link_index before it is used. (cherry picked from commit ba4caa9fecdf7a38f98c878ad05a8a64148b6881) | Jul 24, 2026 |
| CVE-2026-64218(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: fix report_work leak on backbone_gw purge batadv_bla_purge_backbone_gw() removes stale backbone gateway entries, but fails to properly handle their associated report_work: - If report_work is running, the purge must wait for it to finish before freeing the backbone_gw, otherwise the worker may access freed memory (e.g. bat_priv). - If report_work is pending, the purge must cancel it and release the reference held for that pending work item. The previous implementation called hlist_for_each_entry_safe() inside a spin_lock_bh() section, but cancel_work_sync() may sleep and therefore cannot be called from within a spinlock-protected region. Restructure the loop to handle one entry per spinlock critical section: acquire the lock, find the next entry to purge, remove it from the hash list, then release the lock before calling cancel_work_sync() and dropping the hash_entry reference. Repeat until no more entries require purging. | Jul 24, 2026 |
| CVE-2026-64217(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix overrun check in netfs_extract_user_iter() Fix netfs_extract_user_iter() so that if iov_iter_extract_pages() overfills pages[], then those pages don't get included in the iterator constructed at the end of the function. If there was an overfill, memory corruption has already happened. | Jul 24, 2026 |
| CVE-2026-64216(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix potential UAF in netfs_unlock_abandoned_read_pages() netfs_unlock_abandoned_read_pages(rreq) accesses the index of the folios it is wanting to unlock and compares that to rreq->no_unlock_folio so that it doesn't unlock a folio being read for netfs_perform_write() or netfs_write_begin(). However, given that netfs_unlock_abandoned_read_pages() is called _after_ NETFS_RREQ_IN_PROGRESS is cleared, the one folio that it's not allowed to dereference is the one specified by ->no_unlock_folio as ownership immediately reverts to the caller. Fix this by storing the folio pointer instead and using that rather than the index. Also fix netfs_unlock_read_folio() where the same applies. | Jul 24, 2026 |
| CVE-2026-64215(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/a6xx: Check kzalloc return in a8xx_hfi_send_perf_table Check the return value of kzalloc() to prevent a NULL pointer dereference on allocation failure. Patchwork: https://patchwork.freedesktop.org/patch/721342/ | Jul 24, 2026 |
| CVE-2026-64214(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: powerpc/time: Remove redundant preempt_disable|enable() calls from arch_irq_work_raise() A kernel panic is observed when handling machine check exceptions from real mode. BUG: Unable to handle kernel data access on read at 0xc00000006be21300 Oops: Kernel access of bad area, sig: 11 [#1] MSR: 8000000000001003 <SF,ME,RI,LE> CR: 88222248 XER: 00000005 CFAR: c00000000003ffc4 DAR: c00000006be21300 DSISR: 40000000 IRQMASK: 0 NIP [c000000000029e40] arch_irq_work_raise+0x10/0x70 LR [c00000000003ffc8] machine_check_queue_event+0xa8/0x150 Call Trace: [c0000000179d3c70] [c00000000003ff64] machine_check_queue_event+0x44/0x150 [c0000000179d3d30] [c0000000000084e0] machine_check_early_common+0x1f0/0x2c0 The crash occurs because arch_irq_work_raise() calls preempt_disable() from machine check exception (MCE) handlers running in real mode. In this context, accessing the preempt_count can fault, leading to the panic. The preempt_disable()/preempt_enable() pair in arch_irq_work_raise() was originally added by commit 0fe1ac48bef0 ("powerpc/perf_event: Fix oops due to perf_event_do_pending call") to avoid races while raising irq work from exception context. Later, commit 471ba0e686cb ("irq_work: Do not raise an IPI when queueing work on the local CPU") added preemption protection in irq_work_queue() path, while commit 20b876918c06 ("irq_work: Use per cpu atomics instead of regular atomics") added equivalent protection in irq_work_queue_on() before reaching arch_irq_work_raise(): irq_work_queue() / irq_work_queue_on() -> preempt_disable() -> __irq_work_queue_local() -> irq_work_raise() -> arch_irq_work_raise() As a result, callers other than mce_irq_work_raise() already execute with preemption disabled, making the additional preempt_disable()/preempt_enable() pair in arch_irq_work_raise() redundant. The arch_irq_work_raise() function executes in NMI context when called from MCE handler. Hence we will not be preempted or scheduled out since we are in NMI context with MSR[EE]=0. Therefore, it is safe to remove the preempt_disable()/preempt_enable() calls from here. Remove it to avoid accessing preempt_count from real mode context. [Maddy: Fixed the commit title] | Jul 24, 2026 |
| CVE-2026-64213(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Add lock protection to lm90_alert Sashiko reports: lm90_alert() executes in the smbus alert context and calls lm90_update_confreg() to disable the hardware alert line, without acquiring hwmon_lock. Concurrently, sysfs write operations (such as lm90_write_convrate) hold the hwmon_lock, temporarily modify data->config, and then restore it. If an alert interrupt occurs concurrently with a sysfs write, the sysfs path will overwrite the alert handler's modifications to data->config and the hardware register. This unintentionally re-enables the hardware alert line while the alarm is still active, causing an interrupt storm. Add the missing lock to lm90_alert() to solve the problem. | Jul 24, 2026 |
| CVE-2026-64212(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it In iwl_mld_remove_link, the link->fw_id is saved at the beginning of the function so we have it after we freed the link. But the link pointer can be NULL, and is not checked when the fw_id is stored. Fix it by simply freeing the link at the end of the function. fFixes: 0e66a39f4f0e ("wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()") | Jul 24, 2026 |
| CVE-2026-64211(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: srcu: Don't queue workqueue handlers to never-online CPUs While an srcu_struct structure is in the midst of switching from CPU-0 to all-CPUs state, it can attempt to invoke callbacks for CPUs that have never been online. Worse yet, it can attempt in invoke callbacks for CPUs that never will be online, even including imaginary CPUs not in cpu_possible_mask. This can cause hangs on s390, which is not set up to deal with workqueue handlers being scheduled on such CPUs. This commit therefore causes Tree SRCU to refrain from queueing workqueue handlers on CPUs that have not yet (and might never) come online. Because callbacks are not invoked on CPUs that have not been online, it is an error to invoke call_srcu(), synchronize_srcu(), or synchronize_srcu_expedited() on a CPU that is not yet fully online. However, it turns out to be less code to redirect the callbacks from too-early invocations of call_srcu() than to warn about such invocations. This commit therefore also redirects callbacks queued on not-yet-fully-online CPUs to the boot CPU. | Jul 24, 2026 |
| CVE-2026-64210(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix unlocked writing to ICOSQ During napi poll, when the affinity changes and there's still XSK work to be done, we trigger an ICOSQ interrupt on the new CPU. However, this triggering on the ICOSQ is done unprotected. There are 2 such races: A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is running from a different CPU due to affinity change. This can happen because IRQ triggering is done after napi_complete_done(). At this point the NAPI can be scheduled on a different CPU. Like this: CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI) ------------------------------- -------------------------------- napi_complete_done() clears SCHED mlx5e_cq_arm(...) napi_schedule_prep() sets SCHED mlx5e_napi_poll() mlx5e_xsk_alloc_rx_mpwqe() mlx5e_icosq_sync_lock() // noop memcpy 640 B UMR body advance sq->pc by 10 mlx5e_trigger_irq(&c->icosq) wqe_info[pi] = {NOP, 1} mlx5e_post_nop() advances sq->pc B) mlx5e_trigger_irq() is called on the ICOSQ when mlx5e_trigger_napi_icosq() is running. The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized locking scheme that doesn't work for this scenario. Kick the async ICOSQ instead which is always locked. This issue was noticed in the wild with the following splat: netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...] [...] Call Trace: <IRQ> mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core] __napi_poll+0x30/0x200 ? skb_defer_free_flush+0x9c/0xc0 net_rx_action+0x2fe/0x3f0 handle_softirqs+0xd8/0x340 __irq_exit_rcu+0xbc/0xe0 common_interrupt+0x85/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 [...] ---[ end trace 0000000000000000 ]--- mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4, opcode 0xd, syndrome 0x2, vendor syndrome 0x68 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2 WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64 00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02 00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02 00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02 00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02 mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4, opcode 0xd, syndrome 0x5, vendor syndrome 0xf9 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2 | Jul 24, 2026 |
| CVE-2026-64209(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usbc: Fix out-of-bounds array access in dp swing config swing_tbl and pre_emphasis_tbl are 4x4 arrays (valid indices 0-3), but the boundary check uses "> 4" instead of ">= 4", allowing index 4 to cause an out-of-bounds access. | Jul 24, 2026 |
| CVE-2026-64208(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: crypto/krb5, rxrpc: Fix lack of pre-decrypt/pre-verify length checks Change the krb5 crypto library to provide facilities to precheck the length of the message about to be decrypted or verified. Fix AF_RXRPC to make use of this to validate DATA packets secured with RxGK. | Jul 24, 2026 |
| CVE-2026-17039(opens NVD record) | Low | 3.1 | A flaw was found in pki-core. The certificate authority (CA) renewal request path does not perform the realm-based authorization check that the enrollment path performs, allowing an authenticated user entitled to one realm to cause a certificate belonging to a different realm to be renewed without that realm's authorization. | Jul 24, 2026 |
| CVE-2026-8789(opens NVD record) | High | 8.1 | The Easy Appointments plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check and missing nonce verification on the `ea_delete_multiple_connections` AJAX action in all versions up to, and including, 3.12.27. This makes it possible for authenticated attackers, with Contributor-level access and above, to delete arbitrary connection records from the `wp_ea_connections` table, disrupting the plugin's core booking functionality. | Jul 24, 2026 |
| CVE-2026-8308(opens NVD record) | Medium | 6.1 | Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Polen Media Software and Information Services Website Template allows Reflected XSS. This issue affects Website Template: before v2. | Jul 24, 2026 |
| CVE-2026-7007(opens NVD record) | Medium | 4.6 | The Zephyr ext2 file system validates the on-disk superblock in ext2_verify_disk_superblock() (subsys/fs/ext2/ext2_impl.c) before completing a mount. The validator checked the magic number, block size, revision and feature flags, but did not verify that the on-disk fields s_blocks_per_group and s_inodes_per_group are non-zero. Both fields are read directly from the image and are later used as divisors during mount-time initialization. During mount, get_ngroups() divides and modulos s_blocks_count by s_blocks_per_group (reached via ext2_fetch_block_group() from ext2_init_fs()), and get_itable_entry() divides (ino - 1) by s_inodes_per_group when fetching the root inode (both in subsys/fs/ext2/ext2_diskops.c). A superblock with either field set to zero therefore causes an integer division by zero during the mount sequence. An attacker who can present a crafted ext2 image to a device that mounts ext2 — removable media such as an SD card or a USB mass-storage device — can trigger this. On ARMv7-M / ARMv8-M-mainline Cortex-M targets, divide-by-zero trapping is enabled (SCB_CCR_DIV_0_TRP), so the division raises a UsageFault that Zephyr treats as a fatal error, producing a denial of service. The impact is limited to availability; the malformed value is consumed only as a divisor. The fix rejects a zero s_blocks_per_group or s_inodes_per_group in the superblock validator, returning -EINVAL so the mount fails before any block-group or inode I/O occurs. | Jul 24, 2026 |
| CVE-2026-66007(opens NVD record) | Medium | 6.5 | Datasets through 5.0.0, fixed in commit f989ef9, contains a path traversal vulnerability in folder-based dataset builders where the file_name metadata field is not properly validated before being joined to the dataset directory. Attackers can supply crafted file_name values with directory traversal sequences to read arbitrary local files, which are then embedded into output when save_to_disk or push_to_hub is called. | Jul 24, 2026 |
| CVE-2026-66006(opens NVD record) | Medium | 5.3 | lakeFS through 1.83.0, fixed in commit 71a45ee, contains an authentication bypass vulnerability in the /setup_comm_prefs endpoint that allows unauthenticated attackers to overwrite operator metadata including email, name, and company after setup completion. Attackers can POST to this endpoint to modify security update preferences, disable security communications, and trigger falsified telemetry events using the legitimate installation ID. | Jul 24, 2026 |
| CVE-2026-66005(opens NVD record) | Medium | 6.3 | Jan through 0.8.4, fixed in commit 3e1c1e7, contains a CORS misconfiguration vulnerability in its local API server that allows network-adjacent attackers to bypass trusted host restrictions by exploiting the server's replacement of user-configured trusted hosts with a wildcard that reflects arbitrary origins with credentials. Attackers on the local network or using DNS rebinding can reach the unauthenticated OpenAI-compatible API to perform inference, enumerate models, invoke MCP tools, and read cross-origin responses. | Jul 24, 2026 |
| CVE-2026-66004(opens NVD record) | Medium | 5.3 | BlenderMCP before commit 30a3308 contains a path traversal vulnerability in the download_polyhaven_asset method that allows attackers to write arbitrary files by injecting traversal sequences in API response include keys. Attackers performing MITM attacks or prompt injection can supply malicious paths like '../../.bashrc' to overwrite sensitive files and achieve persistent code execution. | Jul 24, 2026 |
| CVE-2026-58630(opens NVD record) | Critical | 10.0 | Improper access control in Azure App Service allows an unauthorized attacker to elevate privileges over a network. | Jul 24, 2026 |
| CVE-2026-58586(opens NVD record) | Critical | 9.8 | Image::WebP versions before 0.3.0 for Perl bundle a vulnerable version of libwebp. Image::WebP does not link to the system libwebp. Instead, it uses a bundled copy of libwebp 0.3.0 (released 2013-03-20). That version has multiple known vulnerabilities, including CVE-2023-4863. Any caller that decodes an untrusted WebP image reaches the bundled decoder. Because the library is compiled into the module, upgrading the system libwebp does not remediate this. | Jul 24, 2026 |
| CVE-2026-57106(opens NVD record) | Critical | 10.0 | Server-side request forgery (ssrf) in Data Quality allows an unauthorized attacker to elevate privileges over a network. | Jul 24, 2026 |
| CVE-2026-56163(opens NVD record) | Critical | 10.0 | Missing authentication for critical function in Microsoft Azure Kubernetes Service allows an unauthorized attacker to elevate privileges over a network. | Jul 24, 2026 |
| CVE-2026-55732(opens NVD record) | Unscored | — | Out-of-bounds Read (CWE-125) in BACnet packet parsing (`bacdt_datetime_to_tod`) in Loytec LIP-ME201C, L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.18 on LINX-A64 allows an unauthenticated remote attacker to crash `linx_a64.exe` and ultimately reboot the device via a malformed BACnet TimeSynchronization or UTC-TimeSynchronization packet with an invalid month value. The same vulnerability affects multiple other Loytec products. | Jul 24, 2026 |
| CVE-2026-55731(opens NVD record) | Unscored | — | Unchecked input for loop condition (CWE-606) in the SNMP agent in Loytec LIP-ME201C, L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.16 on LINX-A64 allows an unauthenticated remote attacker to cause persistent denial of service (CPU exhaustion) via a crafted SNMP GETNEXT request with a large OID component. | Jul 24, 2026 |