Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
44,679 matching · page 233/894Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-11743(opens NVD record) | Medium | 6.6 | The SF32LB MPI QSPI NOR flash driver (drivers/flash/flash_sf32lb_mpi_qspi_nor.c) validated the flash offset and length on its read and write paths with the test (offset + size) > data->size. Because offset is a signed off_t while size is unsigned, a negative offset is converted to a large unsigned value and the addition can wrap to a small result that passes the check. The read path then performs memcpy(dst, (void *)(data->base + offset), size) and the write path programs flash at offset and cache-invalidates data->base + offset, in both cases accessing memory outside the mapped flash window. The driver's erase path already rejected negative offsets, but read and write did not. In builds with CONFIG_USERSPACE, flash_read and flash_write are syscalls whose verifiers validate the device object and the caller's buffer but deliberately delegate offset bounds checking to the driver. An unprivileged thread that has been granted access to this flash device can therefore call the syscall with a crafted negative offset and a buffer valid in its own memory domain, and reach the unchecked access. The most direct impact is on the read path: by choosing a negative offset and matching size, an attacker slides the memcpy source below the flash base and copies arbitrary CPU-addressable memory into its own buffer, disclosing memory it is not authorized to read. The write path additionally allows programming flash at an out-of-range address and invalidating an attacker-chosen cache range, affecting integrity and availability. Reachability requires userspace to be enabled and the raw flash device object to be granted to an untrusted thread. The fix replaces the check with qspi_nor_range_is_valid(), which rejects negative offsets and performs the bound comparison in overflow-safe 64-bit arithmetic on both paths, and additionally adds an SRAM DMA bounce buffer plus source/destination overlap rejection to prevent a separate DMA bus-hang condition. | Aug 7, 2026 |
| CVE-2026-11742(opens NVD record) | Low | 3.6 | The kernel queue helper z_queue_node_peek() in kernel/queue.c dereferences a node taken from a queue's data_q list, reading the node's flag byte and, for items enqueued via k_queue_alloc_append/alloc_prepend, the data pointer of an internally allocated alloc_node struct. The implementations of z_impl_k_queue_peek_head() and z_impl_k_queue_peek_tail() performed this read-and-dereference without holding the queue's spinlock, while every other accessor of the same list — including k_queue_get(), which unlinks a node and k_free()s its backing alloc_node — operates under that lock. Because peek was unsynchronized, a concurrent k_queue_get() on the same queue (on an SMP build, or under preemption/ISR concurrency) can free the node between the moment peek obtains the node pointer and the moment it dereferences it. The peek then reads flag bits and a data pointer out of freed, potentially re-allocated heap memory and returns a stale or dangling pointer to its caller. k_fifo and k_lifo are thin wrappers over k_queue, so this affects buffer queues used throughout the net_buf, Bluetooth, USB, and networking subsystems; the peek operations are also system calls reachable from CONFIG_USERSPACE threads. The consequences are a use-after-free read that can leak stale heap contents (one pointer word) and, when the returned dangling pointer is subsequently consumed as a live buffer, a dereference that can crash the system or corrupt memory. Exploitation requires winning a small race window with local access (e.g. a userspace process racing k_queue_peek_* against k_queue_get on a shared queue, or two CPUs), so practical impact is bounded and of low severity. The fix wraps both peek implementations with k_spin_lock/k_spin_unlock on the queue lock, making the read-and-dereference atomic with respect to the concurrent unlink-and-free and bringing peek into line with the rest of the queue's locking discipline. | Aug 7, 2026 |
| CVE-2026-9031(opens NVD record) | Unscored | — | An input validation vulnerability exists in the HTTP-WRITEOEM handler due to insufficient validation of user-supplied data before it is processed by internal flash-write handling logic. Successful exploitation may cause httpd process or device to crash, resulting in loss of access to the web interface and a denial-of-service condition. | Aug 7, 2026 |
| CVE-2026-9030(opens NVD record) | Unscored | — | A denial-of-service vulnerability exists in httpd service on Archer A6 v4 where the asynchronous systool instruction handlng path in httpd does not properly synchronize or safely manage concurrent systool operations. By sending crafted systool instructions through the asynchronous request path, successful exploitation may cause the httpd process or device management service to crash and may result in temporary loss of access to the web management interface or device reboot. | Aug 7, 2026 |
| CVE-2026-71381(opens NVD record) | Medium | 4.0 | Adobe Genuine Software Integrity Service on Windows is affected by an Incorrect Authorization vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass security measures and gain unauthorized limited write access. Exploitation of this issue does not require user interaction, but requires the attacker to access the target desktop system locally (e.g., keyboard, console), or remotely (e.g., SMB). | Aug 7, 2026 |
| CVE-2026-70624(opens NVD record) | Unscored | — | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | Aug 7, 2026 |
| CVE-2026-70623(opens NVD record) | Unscored | — | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | Aug 7, 2026 |
| CVE-2026-69207(opens NVD record) | Medium | 5.3 | Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.34, the built-in CORS middleware, hono/cors, is vulnerable to a regular expression denial of service (ReDoS). During a preflight OPTIONS request, the middleware parses the attacker-controlled Access-Control-Request-Headers header using a whitespace-tolerant regular expression whose backtracking makes its running time quadratic in the input length. Because the header value is bounded only by the deployment's maximum HTTP header size, a single preflight carrying a long run of whitespace can consume seconds of CPU and block request processing. On runtimes that share one execution thread across requests, this stalls concurrent requests as well, and repeated requests can render the service unresponsive. This affects the default configuration, since the vulnerable path is reached whenever cors() is used with an unset or empty allowHeaders. Applications that set a non-empty allowHeaders are not affected. This issue is fixed in version 4.12.34. | Aug 7, 2026 |
| CVE-2026-66061(opens NVD record) | High | 7.1 | Home Assistant is open source home automation software focused on local control and privacy. Prior to 2026.5.0, the iOS Companion app treats tag links (NFC or QR) delivered through an OS-level routing mechanism such as iOS universal links as if they were physically scanned, without validating the calling app or prompting the user. As a result, any untrusted app on the device can forward an arbitrary tag to Home Assistant, causing it to execute the associated automation as though a legitimate user had scanned an authorized tag. This allows silent, unattended automation execution by untrusted local callers. This issue has been fixed in version 2026.5.0. | Aug 7, 2026 |
| CVE-2026-66060(opens NVD record) | High | 7.1 | Home Assistant is open source home automation software focused on local control and privacy. Prior to 2026.5.3, the Companion app treats tag links (NFC or QR) delivered through an OS-level routing mechanism as if they were physically scanned, without validating the calling app or prompting the user. As a result, any untrusted app on the device can forward an arbitrary tag to Home Assistant, causing it to execute the associated automation as though a legitimate user had scanned an authorized tag. This allows silent, unattended automation execution by untrusted local callers. This issue is fixed in version 2026.8.1. | Aug 7, 2026 |
| CVE-2026-59717(opens NVD record) | Medium | 4.3 | Home Assistant is open source home automation software focused on local control and privacy. Prior to 2026.6.1, the Android Companion app is vulnerable to an open redirect. The app passes the URL fragment from a homeassistant://invite deep link into the onboarding flow without ever displaying the destination hostname. Because no screen in the invitation or onboarding flow shows the parsed server URL before onboarding commits to it, a victim has no way to distinguish a legitimate invite from a malicious one. An attacker can craft an invite so that a single tap on the legitimate-looking "Connect to my Home Assistant server" button opens their /auth/authorize endpoint in the URL-less onboarding WebView, presenting a look-alike login page that captures the victim's credentials. Since invitations are intended to onboard brand-new users, targets are especially unlikely to notice the substitution. This issue is fixed in version 2026.6.1. | Aug 7, 2026 |
| CVE-2026-54338(opens NVD record) | Medium | 5.3 | JupyterHub is software that allows users to create a multi-user server for Jupyter notebooks. Prior to 5.5.0, invalid input to form-based login authenticators can place an unbounded attacker-controlled username in failed-login logs, allowing an unauthenticated attacker to consume logging and storage resources. This issue is fixed in version 5.5.0. | Aug 7, 2026 |
| CVE-2026-50540(opens NVD record) | Critical | 9.6 | Kata Containers is an open source project focusing on a standard implementation of lightweight Virtual Machines (VMs) that perform like containers. Prior to version 4.0.0, kata-runtime is vulnerable to host code execution via an unvalidated configuration path annotation. The runtime accepts an arbitrary io.katacontainers.config_path pod annotation and loads the referenced host TOML file without restriction. As a result, a pod user who can place a file at a host-visible path can supply a configuration that selects an attacker-controlled hypervisor or virtio-fs daemon binary, executing code as root on the host. This issue is fixed in version 4.0.0. | Aug 7, 2026 |
| CVE-2026-47664(opens NVD record) | Unscored | — | Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, the `$import-pnp` operation in Pathling Server accepts a caller-supplied `exportUrl` and uses it as the remote FHIR Bulk Export endpoint without constraining it to a trusted source. When PNP credentials are configured, Pathling builds a credentialed bulk-export client targeting the caller-chosen host, downloads manifest-selected files, and then reclassifies those staged files as trusted local `file://` imports - bypassing the configured `allowableSources` allowlist that protects the ordinary `$import` operation. This is fixed in Pathling Server 2.0.0. As a workaround, disable the `$import-pnp` operation (`pathling.operations.importPnpEnabled=false`) or do not configure PNP credentials. | Aug 7, 2026 |
| CVE-2026-47663(opens NVD record) | Unscored | — | Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, Pathling's typed CRUD/search/batch FHIR surface allows an authenticated caller with only coarse operation authorities to act on attacker-chosen resource families because those entrypoints do not consistently enforce the documented per-resource `read` and `write` authorities. The documented authorization model requires an operation authority (e.g. `pathling:search`) to be paired with the matching per-resource `read` or `write` authority (e.g. `pathling:read:Patient`). Delete and batch are documented to require write authority for all referenced resource types. However, typed search, update, and related handlers are annotated only with `@OperationAccess(...)` and act on the provider-selected resource type without checking the corresponding per-resource authority. This is fixed in Pathling Server 2.0.0. | Aug 7, 2026 |
| CVE-2026-47662(opens NVD record) | Unscored | — | Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, Pathling's typed CRUD/search/batch FHIR surface allows an authenticated caller with only coarse operation authorities to act on attacker-chosen resource families because those entrypoints do not consistently enforce the documented per-resource `read` and `write` authorities. The documented authorization model requires an operation authority (e.g. `pathling:search`) to be paired with the matching per-resource `read` or `write` authority (e.g. `pathling:read:Patient`). Delete and batch are documented to require write authority for all referenced resource types. However, typed search, update, and related handlers are annotated only with `@OperationAccess(...)` and act on the provider-selected resource type without checking the corresponding per-resource authority. This is fixed in Pathling Server 2.0.0. | Aug 7, 2026 |
| CVE-2026-46358(opens NVD record) | Unscored | — | OpenBao is an open source identity-based secrets management system. Prior to version 2.5.4, OpenBao's inline auth functionality incorrectly redacted audit log entries, resulting in non-auth headers being removed and auth-related headers being retained in cleartext. This requires an attacker to compromise access to the audit device. Operators should review leaked source authentication material and rotate it as appropriate. This is fixed in OpenBao v2.5.4. | Aug 7, 2026 |
| CVE-2026-19246(opens NVD record) | Medium | 6.3 | A vulnerability has been found in HKUDS nanobot up to 0.2.1. This affects the function _download_image_data_url of the file nanobot/providers/image_generation.py of the component Provider-returned Image URL Handler. The manipulation leads to server-side request forgery. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of the patch is 5095. It is recommended to apply a patch to fix this issue. The vendor explains: "We confirm that provider-returned image URLs required the same SSRF protections applied to other network retrieval paths. (...) The patch is currently available on main and is planned for the next patch release, v0.3.1." | Aug 7, 2026 |
| CVE-2026-19245(opens NVD record) | Low | 3.3 | A flaw has been found in HKUDS nanobot up to 0.2.1. The impacted element is the function ExecTool._prepare_command of the file nanobot/agent/tools/shell.py of the component Login-shell Environment Handler. Executing a manipulation can lead to information disclosure. The attack requires local access. The exploit has been published and may be used. Upgrading to version 0.3.0 is sufficient to resolve this issue. This patch is called 4525. The affected component should be upgraded. Multiple issues were reported to the project. They reacted with a high level of professionalism and kindness: "The report concerns shell startup files reintroducing environment variables when command execution defaults to a login shell. The default was changed so exec does not use a login shell unless explicitly requested". | Aug 7, 2026 |
| CVE-2026-19244(opens NVD record) | Medium | 4.7 | A vulnerability was detected in HKUDS nanobot up to 0.2.1. The affected element is the function connect_mcp_servers of the file nanobot/agent/tools/mcp.py of the component MCP enabledTools Scope Handler. Performing a manipulation results in improper access controls. The attack is possible to be carried out remotely. The exploit is now public and may be used. Upgrading to version 0.3.0 is sufficient to fix this issue. The patch is named 4436. You should upgrade the affected component. Multiple issues were reported to the project. They reacted with a high level of professionalism and kindness: "Both reports describe the same root cause: MCP resource and prompt wrappers could be registered outside the intended enabledTools scope. The registration boundary was corrected". | Aug 7, 2026 |
| CVE-2026-11425(opens NVD record) | Medium | 4.4 | Domoticz versions prior to 2026.3 contains a stored cross-site scripting vulnerability in the mobile dashboard that allows authenticated attackers to inject arbitrary HTML and JavaScript by updating Text or Alert subtype device values through the API. The mobile dashboard renders device data via ng-bind-html with only an nl2br() transform that performs no HTML escaping, allowing attackers to store malicious payloads that execute in any administrator's browser upon viewing the mobile dashboard, enabling session cookie theft and account takeover. | Aug 7, 2026 |
| CVE-2026-71870(opens NVD record) | Unscored | — | pypdf is a free and open-source pure-python PDF library. Prior to 6.15.0, a crafted PDF can cause large memory consumption when pypdf/_cmap.py function parse_bfrange parses unusually large source-code or destination-string tokens in a font /ToUnicode CMap during text extraction. This issue is fixed in 6.15.0. | Aug 7, 2026 |
| CVE-2026-66151(opens NVD record) | Medium | 5.5 | SonicWall Global VPN Client version 4.10.8.1108 and earlier is vulnerable to an out-of-bounds kernel memory read in the SWIPsec.sys driver, which could allow a local attacker to cause a system crash. | Aug 7, 2026 |
| CVE-2026-65819(opens NVD record) | High | 7.5 | gopacket provides packet processing capabilities for Go. Through version 1.7.0, multiple layer decoders use attacker-controlled lengths, counts, or offsets before validating them against packet buffers, allowing a crafted packet decoded through DecodingLayerParser or DecodeFromBytes to trigger an unrecovered panic and remotely deny service. A patch commit is available at 210f25f. | Aug 7, 2026 |
| CVE-2026-62296(opens NVD record) | High | 7.5 | HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, XhtmlParser.java imposes no maximum element nesting depth, so a deeply nested text.div narrative triggers unbounded recursion between parseElementInner() and parseElement(), raising a StackOverflowError. An attacker who can submit FHIR resources containing such narratives can thus crash a parsing or validation worker thread, affecting validator services and any application that parses attacker-supplied FHIR JSON or XML. This issue is fixed in version 6.9.11. | Aug 7, 2026 |
| CVE-2026-62295(opens NVD record) | High | 7.5 | HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, the JSON utility parser in org.hl7.fhir.utilities.json.parser.JsonParser enforces no maximum nesting depth for arrays or objects. As a result, a small but deeply nested, syntactically valid FHIR JSON document can trigger unbounded readArray() or readObject() recursion, raising a StackOverflowError before structural validation runs. An attacker who can submit JSON resources for validation can thus crash the request thread, and services that do not isolate StackOverflowError safely may experience worker loss or process instability — a denial-of-service condition. This issue is fixed in version 6.9.11. | Aug 7, 2026 |
| CVE-2026-62293(opens NVD record) | Medium | 5.0 | HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, the hidden scan command concatenates attacker-controlled Implementation Guide titles, profile titles, and source references into scan.html without escaping in Scanner.java. As a result, a user who scans an attacker-supplied IG/profile and then opens or publishes the generated local/CI HTML report can trigger stored cross-site scripting, executing attacker-controlled JavaScript in the report's browser context. This issue is fixed in version 6.9.11. | Aug 7, 2026 |
| CVE-2026-61808(opens NVD record) | Critical | 9.8 | LightRAG provides simple and fast retrieval-augmented generation. Through version 1.5.4, the LightRAG API server binds to all network interfaces with authentication disabled by default, allowing an unauthenticated network attacker to read indexed document content, upload or delete documents, modify the knowledge graph, cancel pipelines, clear caches, and consume LLM resources. This issue is mitigated in version 1.5.5rc1. | Aug 7, 2026 |
| CVE-2026-48039(opens NVD record) | Critical | 9.1 | Meta Ads MCP is a Model Context Protocol (MCP) server that lets AI assistants run Meta Ads. Prior to version 1.0.109, `AuthInjectionMiddleware.dispatch()` at `http_auth_integration.py:272` unconditionally forwards unauthenticated Streamable HTTP requests to downstream MCP tool handlers without issuing a `401` response, allowing any network-reachable caller to invoke MCP tools without authentication. When no per-request credential is present, tool handlers fall back to the `META_ACCESS_TOKEN` environment variable, and when the downstream Meta Graph API call fails, `api.py:263–269` serialises the raw `httpx` request URL—including the operator's `access_token` as a query parameter—into the JSON-RPC response body, delivering the credential to the unauthenticated caller. Version 1.0.109 fixes the issue. | Aug 7, 2026 |
| CVE-2026-48007(opens NVD record) | Unscored | — | Element Call is a native Matrix video conferencing application. Versions 0.5.17 through 0.19.3 report analytics data to a PostHog server, when configured to by a `posthog` key in config.json or by the `posthogApiHost` and `posthogApiKey` URL parameters. Several fields of this data (`$initial_person_info`, `$session_entry_url`, and `$current_url`) were found to contain the full URL of the user's visited page, including the fragment. Users of a standalone Element Call ‘SPA’ instance such as https://call.element.io may therefore have reported the full URLs of certain calls, including encryption passwords, to the configured PostHog server, potentially compromising the confidentiality of the calls to actors who could access both the PostHog analytics data and the encrypted media streams. The same issue is present in Element Call's embedded package, but in practice it does not impact applications using this package (including Element Web, Element Desktop, Element X iOS, and Element X Android) because they distribute encryption keys over Matrix rather than encoding a password in the URL. The issue is patched in Element Call 0.19.4. Some workarounds are available. Users may opt out of analytics in the 'Feedback' tab of Element Call's settings and create new links for future calls. Admins who host Element Call as a standalone application may disable PostHog analytics entirely by removing the `posthog` key from their deployment's config.json file. | Aug 7, 2026 |
| CVE-2026-47661(opens NVD record) | Unscored | — | Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, Pathling's `/$result` endpoint allows a caller who can obtain any valid async export job ID to supply `file` parameter values containing path traversal sequences. The handler verifies only the supplied `job` and never normalises or confines the requested `file` path to that job's `jobs/<jobId>` directory before opening it as a filesystem resource. Because async export scratch space lives under the same warehouse database root as persisted resource tables, an attacker can use their own export job to read other files from the warehouse. This is fixed in Pathling Server 2.0.0. As an interim mitigation, disable the async export operations (`pathling.operations.exportEnabled`, `patientExportEnabled`, `groupExportEnabled`, `bulkSubmitEnabled`) or enable authentication and restrict export capability to trusted callers. | Aug 7, 2026 |
| CVE-2026-47660(opens NVD record) | Unscored | — | Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, Pathling's bulk-submit operation allows an allowed submitter to supply an explicit `oauthMetadataUrl` parameter that is not validated against `pathling.bulkSubmit.allowableSources`. When present, the bulk-submit OAuth flow trusts metadata and the returned `token_endpoint` from the caller-chosen location, then builds outbound OAuth client authentication directly from the submitter's stored credentials. This is fixed in Pathling Server 2.0.0. | Aug 7, 2026 |
| CVE-2026-47659(opens NVD record) | Unscored | — | Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, Pathling's `/$result` endpoint allows a caller who can obtain any valid async export job ID to supply `file` parameter values containing path traversal sequences. The handler verifies only the supplied `job` and never normalises or confines the requested `file` path to that job's `jobs/<jobId>` directory before opening it as a filesystem resource. Because async export scratch space lives under the same warehouse database root as persisted resource tables, an attacker can use their own export job to read other files from the warehouse. This is fixed in Pathling Server 2.0.0. The `$result` handler now resolves and canonicalizes the requested file path and rejects any request that escapes the job's `jobs/<jobId>` directory. As an interim mitigation, disable the async export operations (`pathling.operations.exportEnabled`, `patientExportEnabled`, `groupExportEnabled`, `bulkSubmitEnabled`) or enable authentication and restrict export capability to trusted callers. | Aug 7, 2026 |
| CVE-2026-19243(opens NVD record) | Medium | 6.3 | A security vulnerability has been detected in HKUDS nanobot up to 0.2.1. Impacted is the function ExecTool._guard_command/ExecTool._spawn of the file nanobot/agent/tools/shell.py of the component Shell Allowlist Handler. Such manipulation leads to os command injection. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 0.3.0 is recommended to address this issue. The name of the patch is 4562. It is advisable to upgrade the affected component. Multiple issues were reported to the project. They reacted with a high level of professionalism and kindness: "These five reports are variants of the same root cause: validation of shell commands containing multiple segments, wrappers, comments, or chained commands. The issue was fixed by validating every executable shell segment against the configured allowlist". | Aug 7, 2026 |
| CVE-2026-19113(opens NVD record) | Medium | 5.3 | Consul Community Edition and Consul Enterprise 1.3.0 through 2.0.2 are vulnerable to an unauthenticated denial of service in several agent HTTP API endpoints. A remote caller could cause the agent to consume substantial memory before the request was rejected. This vulnerability, CVE-2026-19113, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. | Aug 7, 2026 |
| CVE-2026-19017(opens NVD record) | Medium | 6.8 | Consul Community Edition and Consul Enterprise 1.18.21 through 2.0.2 are vulnerable to a partial arbitrary file read when configured to use the Vault Connect CA provider with JWT or AppRole authentication. A privileged attacker with `operator:write` permission may direct Consul to read and forward credential files outside the intended scope, potentially leading to the exfiltration of sensitive secrets from the Consul server host. This vulnerability, CVE-2026-19017, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. | Aug 7, 2026 |
| CVE-2026-19016(opens NVD record) | Medium | 4.2 | Consul Community Edition and Consul Enterprise 1.19.1 through 2.0.2 did not enforce the {{session:write}} ACL permission for session deletion operations submitted through the transaction API. An authenticated caller with network access to the Consul server RPC port could delete arbitrary sessions without holding the required permission. This vulnerability, CVE-2026-19016, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. | Aug 7, 2026 |
| CVE-2026-19015(opens NVD record) | Medium | 5.3 | Consul Community Edition and Consul Enterprise 1.2.0 through 2.0.2 are vulnerable to an uncontrolled resource consumption issue in the Connect CA roots endpoint that may allow a remote caller to grow the agent's Connect CA roots cache without bound, defeating the operator's cache-disable configuration. This vulnerability, CVE-2026-19015, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. | Aug 7, 2026 |
| CVE-2026-19014(opens NVD record) | Medium | 4.3 | Consul Community Edition and Consul Enterprise 1.17.0 through 2.0.2 are vulnerable to an uncontrolled resource consumption issue in the Connect authorization endpoint that may allow a caller to grow the agent's intention-match cache without bound, defeating the operator's cache-disable configuration. This vulnerability, CVE-2026-190124, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. | Aug 7, 2026 |
| CVE-2026-19012(opens NVD record) | Medium | 5.3 | Consul Community Edition and Consul Enterprise 1.18.0 through 2.0.2 are vulnerable to an authenticated denial of service in the Enterprise-to-Community Edition downgrade path that may allow an authorized caller to crash the Consul server. A caller with config-entry write permission can submit a service-router configuration entry that causes the agent to exit unexpectedly. This vulnerability, CVE-2026-19012, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. | Aug 7, 2026 |
| CVE-2026-15972(opens NVD record) | High | 7.5 | Consul Community Edition and Consul Enterprise 1.13.0 through 2.0.2 are vulnerable to an unauthenticated denial of service through unbounded connection acceptance on the external gRPC listeners. A remote attacker may exhaust agent file descriptors, goroutines, and memory by opening many incomplete connections, potentially preventing legitimate clients from connecting. This vulnerability, CVE-2026-15972, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. | Aug 7, 2026 |
| CVE-2026-15970(opens NVD record) | Medium | 4.2 | Consul Community Edition and Consul Enterprise 1.20.1 through 2.0.2 are vulnerable to an L7 intention authorization bypass when a service proxy is configured with a custom public listener. An authenticated mesh workload may reach HTTP paths that are blocked by a path-based deny intention. This vulnerability, CVE-2026-15970, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. | Aug 7, 2026 |
| CVE-2026-71852(opens NVD record) | Unscored | — | pypdf is a free and open-source pure-python PDF library. Prior to 6.15.0, a crafted PDF can cause long runtimes and large memory consumption when pypdf/_font.py function Font._collect_cid_character_widths expands unusually large CID font /W width ranges or excessive width entries during text extraction. This issue is fixed in 6.15.0. | Aug 7, 2026 |
| CVE-2026-71851(opens NVD record) | Critical | 9.0 | crypto-js is a JavaScript library of crypto standards. Versions of crypto-js prior to 4.0.0 generate randomness in CryptoJS.lib.WordArray.random() using a custom variation of the Multiply-With-Carry pseudorandom number generator, seeded from Math.random(), instead of a cryptographically secure source. This generator was introduced in version 3.1.2-4 and remained present in nearly every 3.x release. Nominal requests for 128 or 256 bits of entropy through this function produce effective search spaces of approximately 2 to the 39th and 2 to the 47th possibilities, small enough to enumerate on commodity hardware. Downstream wallet applications that used CryptoJS.lib.WordArray.random() as the entropy source for BIP39 recovery phrases are affected, and an attacker who enumerates the reduced output space can recover the resulting private keys and control the associated funds. This issue is fixed in version 4.0.0. | Aug 7, 2026 |
| CVE-2026-71850(opens NVD record) | Medium | 4.8 | Hono is a Web application framework that provides support for any JavaScript runtime. From 3.8.0 to 4.12.33, memo() from hono/jsx retains the result of a server side render and reuses it for later renders with comparator equal props, and request scoped values read inside the component take no part in that comparison, so a response can contain HTML rendered for another user's request. Components wrapped with memo() are compared by props alone; values read implicitly during rendering, such as JSX Context through createContext() and useContext(), useRequestContext() from hono/jsx-renderer, and getContext() from hono/context-storage, do not participate, and the retained result lives as long as the wrapped component, so it outlives the request that produced it. A user may receive a response containing HTML rendered for another user when both render the same memoized component with comparator equal props on the same warm instance, which may disclose another user's account or profile data, disclose request scoped secrets embedded in HTML such as CSRF tokens, or expose role specific content to users who should not receive it. This issue is fixed in version 4.12.34. | Aug 7, 2026 |
| CVE-2026-71849(opens NVD record) | Low | 3.7 | Hono is a Web application framework that provides support for any JavaScript runtime. From 4.7.0 to 4.12.33, the Proxy Helper proxy() function in hono/proxy does not remove response headers named by the origin's Connection header. Per RFC 9110 Section 7.6.1, an intermediary must remove the header fields listed in a message's Connection header field before forwarding the message, in addition to the well known hop by hop headers, but the proxy() function only removed the well known hop by hop headers, including Connection itself, from origin responses. A client may therefore receive response headers that the origin intended only for its immediate peer, disclosing connection scoped or internal metadata contained in such headers, when an application proxies responses from an origin that declares additional, non standard headers as hop by hop via the Connection response header. This issue is fixed in version 4.12.34. | Aug 7, 2026 |
| CVE-2026-71848(opens NVD record) | Medium | 5.3 | Hono is a Web application framework that provides support for any JavaScript runtime. From 4.12.0 to 4.12.33, the languageDetector middleware is vulnerable to algorithmic complexity denial of service when processing a crafted language tag containing a large number of hyphen separated subtags. To implement progressive language tag truncation, normalizeLanguage() repeatedly calls parts.slice(0, i).join('-') for every possible prefix, so the total amount of string processing grows quadratically with the number of subtags. Language values may come from a query parameter, cookie, Accept-Language header, or URL path, depending on the detector configuration, and the default detector order enables query string, cookie, and header detection, so applications using languageDetector() may expose this processing to unauthenticated requests. An attacker may repeatedly send requests containing long, hyphen separated language tags, causing excessive CPU consumption and preventing unrelated requests from being processed. This issue is fixed in version 4.12.34. | Aug 7, 2026 |
| CVE-2026-71847(opens NVD record) | Unscored | — | Ruby JSON is a JSON implementation for Ruby. From 2.20.0 until 2.21.2, Ruby's JSON native C extension clears the consumed JSON::ResumableParser input buffer but leaves state.start, state.cursor, and state.end pointing into released storage. When partial_value reconstructs an incomplete object containing duplicate keys, the duplicate-key warning path calls cursor_position, which dereferences those stale pointers. This results in a heap-use-after-free and can terminate the Ruby process. An attacker who can supply JSON stream data to an application using JSON::ResumableParser may cause process termination when the application calls partial_value on incomplete attacker-controlled input containing duplicate object keys. This issue has been fixed in version 2.21.2. | Aug 7, 2026 |
| CVE-2026-70561(opens NVD record) | Medium | 6.5 | TestLink 1.9.20 and prior contains an insecure direct object reference vulnerability that allows any authenticated user, including low-privilege guest accounts, to read arbitrary attachments by supplying an integer attachment ID to the attachmentdownload.php handler without any project or role authorization check. Attackers can enumerate sequential integer IDs through the attachment download endpoint to retrieve file contents from private projects they have no membership in, bypassing the per-project access control model and exposing test specifications, requirements documents, execution evidence, and other sensitive uploaded files across the entire installation. | Aug 7, 2026 |
| CVE-2026-69127(opens NVD record) | Unscored | — | Kirby is an open-source content management system. Prior to 4.9.5 and from 5.0.0 through 5.5.1, the REST API error handler can return unsanitized PHP error messages that expose the full filesystem path of the Kirby installation to unauthenticated API users. This vulnerability affects all Kirby sites that have not disabled the REST API with the 'api' => false option. This issue is fixed in versions 4.9.5 and 5.5.2. | Aug 7, 2026 |