Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
44,679 matching · page 225/894Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-68160(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps() ceph_handle_caps() reads snap_trace_len from the wire-format ceph_mds_caps header and uses it unconditionally to build a fake end pointer (snaptrace + snaptrace_len) that is later handed to ceph_update_snap_trace() in the CEPH_CAP_OP_IMPORT case: snaptrace = h + 1; snaptrace_len = le32_to_cpu(h->snap_trace_len); p = snaptrace + snaptrace_len; ... case CEPH_CAP_OP_IMPORT: if (snaptrace_len) { ... if (ceph_update_snap_trace(mdsc, snaptrace, snaptrace + snaptrace_len, false, &realm)) { ... } ceph_update_snap_trace() then decodes a struct ceph_mds_snap_realm from snaptrace using ceph_decode_need(&p, e, sizeof(*ri), bad) with the attacker-supplied fake end e == snaptrace + snaptrace_len. With snaptrace_len == 0xFFFFFFFF the bound check is trivially satisfied, ri = p reads sizeof(struct ceph_mds_snap_realm) past the legitimate msg->front buffer, and ri->num_snaps / ri->num_prior_parent_snaps then drive further out-of-bounds reads of the encoded snap arrays. The eleven msg_version >= 2 .. msg_version >= 12 decoder blocks above the op switch each catch this OOB through their ceph_decode_*_safe() / ceph_decode_need() helpers, but they sit behind a hdr.version-gated if, so a malicious or compromised MDS that sets msg->hdr.version = 1 reaches the IMPORT path with no version-gated decoder having validated snap_trace_len. The shape has been present since ceph_handle_caps() was introduced. Validate snap_trace_len against the message front buffer before consuming it, using the canonical ceph_decode_need() / ceph_has_room() helper. The helper bounds the length with subtraction (n <= end - p, guarded by end >= p) rather than pointer addition, so it is wrap-safe for the attacker-controlled u32 length on 32-bit builds where p + snap_trace_len could overflow the address space. This matches the rest of the ceph decode path (e.g. the pool_ns_len check a few lines below), and the existing goto bad cleanup already covers this exit path. | Aug 10, 2026 |
| CVE-2026-68159(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE __decode_pg_temp() decodes an user-controlled length but only rejects values large enough to overflow the allocation; it does not bound it to CEPH_PG_MAX_SIZE. The helper backs both pg_temp and pg_upmap decoding, and apply_upmap()/get_temp_osds() later copy the decoded list into the fixed-size on-stack array struct ceph_osds.osds[CEPH_PG_MAX_SIZE]. A monitor that sends an OSDMap with a pg_temp/pg_upmap entry longer than 32 thus causes a stack out-of-bounds write. An OSD set for a single PG can never exceed CEPH_PG_MAX_SIZE, so reject longer entries at decode time. The bound is well below the old overflow threshold, so it also covers the allocation-size overflow the previous check guarded against. BUG: KASAN: stack-out-of-bounds in ceph_pg_to_up_acting_osds Write of size 4 ... by task exploit kasan_report (mm/kasan/report.c:595) ceph_pg_to_up_acting_osds (net/ceph/osdmap.c:2617 net/ceph/osdmap.c:2833) calc_target (net/ceph/osd_client.c:1638) __submit_request (net/ceph/osd_client.c:2394) ceph_osdc_start_request (net/ceph/osd_client.c:2490) ceph_osdc_call (net/ceph/osd_client.c:5164) rbd_dev_image_probe (drivers/block/rbd.c:6899) do_rbd_add (drivers/block/rbd.c:7138) ... kernel BUG at net/ceph/osdmap.c:2670! [ idryomov: do the same in __decode_pg_upmap_items() ] | Aug 10, 2026 |
| CVE-2026-68158(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: libceph: Fix multiplication overflow in decode_new_up_state_weight() If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted osdmap, out-of-bounds memory accesses may occur in decode_new_up_state_weight(). This happens because the bounds check for the new_state part is based on calculating its length depending on a len value read from the incoming message. This calculation may overflow leading to an incorrect bounds check. Subsequently, out-of-bounds reads may occur when decoding this part. This patch switches the multiplication to use check_mul_overflow() to abort processing the osdmap if an overflow occurred. Therefore, osdmaps/messages containing large values for len that result in a multiplication overflow are treated as invalid. [ idryomov: rename new_state_len -> new_state_item_size, formatting ] | Aug 10, 2026 |
| CVE-2026-68157(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: libceph: guard missing CRUSH type name lookup Localized read selection can walk a parent bucket whose name exists in the CRUSH map while its type has no matching entry in type_names. get_immediate_parent() then dereferences a NULL type_cn and passes an invalid pointer into strcmp(), causing a null-ptr-deref. Skip such malformed parent buckets unless both the bucket name and type name metadata are present. This keeps malformed hierarchy data from crashing locality lookup and safely falls back to "not local". [ idryomov: add WARN_ON_ONCE ] | Aug 10, 2026 |
| CVE-2026-68156(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: libceph: refresh auth->authorizer_buf{,_len} after authorizer update ceph_x_create_authorizer() caches au->buf->vec.iov_base and au->buf->vec.iov_len in struct ceph_auth_handshake. These cached values are then used by the messenger connect code when sending the authorizer. ceph_x_update_authorizer() can rebuild the authorizer when a newer service ticket is available. If the rebuilt authorizer no longer fits in the existing buffer, ceph_x_build_authorizer() drops its reference to au->buf and allocates a new one. If this is the final reference, ceph_buffer_put() frees the old ceph_buffer and its vec.iov_base, but auth->authorizer_buf still points at that freed memory. A subsequent msgr1 reconnect can therefore queue the stale pointer and trigger a KASAN slab-use-after-free in _copy_from_iter() while tcp_sendmsg() copies the authorizer. Refresh auth->authorizer_buf and auth->authorizer_buf_len after a successful authorizer rebuild so the messenger sends the current buffer. | Aug 10, 2026 |
| CVE-2026-68155(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: libceph: Reject monmaps advertising zero monitors A message of type CEPH_MSG_MON_MAP contains a monmap that is sent from a monitor to the client. This monmap contains information about the existing monitors in the cluster. Currently, a monmap indicating that there are zero monitors in the cluster is treated as valid. However, it is impossible to have zero monitors in the cluster and still receive a valid monmap from a monitor. Therefore, such a monmap must be corrupted and should be treated as invalid. Furthermore, a monmap with a monitor count of zero can subsequently crash the client when attempting to open a session with a monitor in __open_session(). This happens because the "BUG_ON(monc->monmap->num_mon < 1)" assertion in pick_new_mon() is triggered. This patch extends a check in ceph_monmap_decode() to also reject arriving mon_maps with num_mon == 0 rather than only with num_mon > CEPH_MAX_MON. [ idryomov: drop "log output for unusual values of num_mon" part ] | Aug 10, 2026 |
| CVE-2026-68154(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: libceph: reject zero bucket types in crush_decode CRUSH bucket type 0 is reserved for devices. The mapper relies on that invariant and uses type 0 to identify leaf devices. If crush_decode() accepts a bucket with type 0, a malformed CRUSH map can make the mapper treat a negative bucket ID as a device and pass it to is_out(), which then indexes the OSD weight array with a negative value. Reject zero bucket types while decoding the CRUSH map so the invalid state never reaches the mapper. | Aug 10, 2026 |
| CVE-2026-68153(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: libceph: remove debugfs files before client teardown ceph_destroy_client() tears down the monitor client before removing the per-client debugfs files. A concurrent read of the monmap debugfs file can enter monmap_show() after ceph_monc_stop() has freed monc->monmap, triggering a use-after-free. Remove the debugfs files before stopping the OSD and monitor clients. debugfs_remove() drains active handlers and prevents new accesses, so the debugfs callbacks can no longer race the rest of client teardown. | Aug 10, 2026 |
| CVE-2026-68152(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: amt: fix use-after-free in AMT delayed works When an AMT device is removed, pending delayed works can still access the freed amt_dev structure, which may result in kernel crashes or memory corruption. amt_dev_stop() cancels req_wq and discovery_wq with cancel_delayed_work_sync(), but these works can be scheduled again from event_wq after the cancellation. This allows delayed works to access the freed amt_dev structure after the netdev has been released. The following is a simple race scenario: CPU0 CPU1 amt_dev_stop() cancel_delayed_work_sync() amt_event_work() mod_delayed_work(req_wq) free netdev req_wq accesses freed amt_dev Use disable_delayed_work_sync() in amt_dev_stop() to prevent req_wq and discovery_wq from being queued again and wait for running work items to complete. The delayed works are disabled after initialization in amt_newlink() and enabled only when the device is successfully opened. This keeps the delayed work lifecycle synchronized with the lifetime of the AMT device. | Aug 10, 2026 |
| CVE-2026-68151(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: binfmt_elf_fdpic: only honour the first PT_INTERP The program header scan handles PT_INTERP from a switch nested in the scan loop, so its break leaves the switch and not the loop. A binary carrying more than one PT_INTERP runs the case again and overwrites both interpreter_name and interpreter. The previous name allocation leaks and so does the previous interpreter reference, along with the write denial open_exec() took on it. The denial is never released, so the file stays unwritable for as long as the system runs. An unprivileged caller reaches this with a crafted binary and repeats it at will. binfmt_elf stops at the first PT_INTERP. Do the same here. The flaw dates back to the driver's introduction in the pre-git history tree introduced in v2.6.11 by 91808d6ebe39 ("[PATCH] FRV: Add FDPIC ELF binary format driver"). | Aug 10, 2026 |
| CVE-2026-68150(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: fs/super: fix emergency thaw double-unlock of s_umount do_thaw_all() iterates over all superblocks via __iterate_supers() with SUPER_ITER_EXCL, which acquires s_umount exclusively before calling the callback and releases it afterwards. However, the callback do_thaw_all_callback() calls thaw_super_locked() which unconditionally releases s_umount on every code path. This results in a second unlock attempt in __iterate_supers() that corrupts the rwsem state, triggering a DEBUG_RWSEMS warning: [ 182.601148] sysrq: Emergency Thaw of all frozen filesystems [ 182.601865] ------------[ cut here ]------------ [ 182.602375] DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && !rwsem_test_oflags(sem, RWSEM_NONSPINNABLE)): count = 0x0, magic = 0xffff99b1011e5870, owner = 0x0, curr 0xffff99b101b06c80, list not empty [ 182.603817] WARNING: kernel/locking/rwsem.c:1412 at up_write+0xa3/0x170, CPU#2: kworker/2:1/53 [ 182.604578] Modules linked in: [ 182.604864] CPU: 2 UID: 0 PID: 53 Comm: kworker/2:1 Not tainted 7.2.0-rc4-00001-gbd3bd93ea98a-dirty #4 PREEMPT(lazy) [ 182.605711] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1kylin1 04/01/2014 [ 182.606417] Workqueue: events do_thaw_all [ 182.606750] RIP: 0010:up_write+0xaf/0x170 [ 182.607076] Code: 19 3a 92 48 0f 44 c2 48 8b 55 08 48 8b 55 00 4c 8b 45 08 48 8b 55 00 48 8d 3d ad 91 e0 01 48 8b 4d 20 50 48 c7 c6 f0 8c 26 92 <67> 48 0f b9 3a e8 d7 93 4e 00 58 eb 81 48 83 7f 18 00 48 c7 c2 8d [ 182.608563] RSP: 0018:ffffb670001d7e08 EFLAGS: 00010246 [ 182.609007] RAX: ffffffff92349e8d RBX: 0000000000000000 RCX: ffff99b1011e5870 [ 182.609595] RDX: 0000000000000000 RSI: ffffffff92268cf0 RDI: ffffffff92914d10 [ 182.610283] RBP: ffff99b1011e5870 R08: 0000000000000000 R09: ffff99b101b06c80 [ 182.610847] R10: ffff99b10139a808 R11: fefefefefefefeff R12: 0000000000000000 [ 182.611414] R13: ffffffff90cf74d0 R14: 0000000000000000 R15: ffff99b1011e5800 [ 182.612009] FS: 0000000000000000(0000) GS:ffff99b1eaaee000(0000) knlGS:0000000000000000 [ 182.612670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 182.613146] CR2: 00000000005c631c CR3: 00000000013ee000 CR4: 00000000000006f0 [ 182.613722] Call Trace: [ 182.613946] <TASK> [ 182.614130] __iterate_supers+0x128/0x150 [ 182.614463] do_thaw_all+0x1b/0x30 [ 182.614759] process_scheduled_works+0xbb/0x3f0 [ 182.615150] ? __pfx_worker_thread+0x10/0x10 [ 182.615499] worker_thread+0x129/0x270 [ 182.615816] ? __pfx_worker_thread+0x10/0x10 [ 182.616201] kthread+0xe2/0x120 [ 182.616469] ? __pfx_kthread+0x10/0x10 [ 182.616792] ret_from_fork+0x15b/0x240 [ 182.617115] ? __pfx_kthread+0x10/0x10 [ 182.617426] ret_from_fork_asm+0x1a/0x30 [ 182.617761] </TASK> [ 182.617968] ---[ end trace 0000000000000000 ]--- [ 182.618412] Emergency Thaw complete Fix this by switching to SUPER_ITER_UNLOCKED and acquiring s_umount in the callback via super_lock_excl() before calling thaw_super_locked(). This matches the locking pattern expected by thaw_super_locked() and eliminates the double unlock. While at it, remove the dead 'return;' at the end of do_thaw_all_callback(). | Aug 10, 2026 |
| CVE-2026-68149(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: fs: preserve ACL_DONT_CACHE state in forget_cached_acl() The ACL_DONT_CACHE state is meant to be a constant state for the inode for filesystems that want to opt out of posix acl caching. Commit facd61053cff1 ("fuse: fixes after adapting to new posix acl api") used this facility to opt out of posix acl caching for fuse inodes with fuse server that does not negotiate FUSE_POSIX_ACL (fc->posix_acl). The commit also takes care to gate the forget_all_cached_acls() call in fuse_set_acl() on fc->posix_acl because there is no need for it, but there are other placed in fuse code which call forget_all_cached_acls() unconditional to fc->posix_acl and those cause the loss of the ACL_DONT_CACHE state. This is not only a functional bug. Properly timed, a get_acl() from this fuse filesystem can return a stale cached value, as was observed in tests, because set_acl() does not invalidate the unintentional acl cache. We could fix this in fuse, but it actually makes no sense for the vfs helper forget_cached_acl() to invalidate the ACL_DONT_CACHE state, so let it not do that to fix fuse and future users of ACL_DONT_CACHE. | Aug 10, 2026 |
| CVE-2026-68148(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: fscrypt: Add missing superblock check in find_or_insert_direct_key() The legacy 'fscrypt_direct_keys' table caches master keys that are used by v1 encryption policies that have FSCRYPT_POLICY_FLAG_DIRECT_KEY. It's just a global table for all filesystems (since the keys can be provided by the legacy process-subscribed keyrings mechanism, which makes it difficult to reuse super_block::s_master_keys). The entries in it ('struct fscrypt_direct_key') do contain a super_block pointer, though, for passing to fscrypt_destroy_inline_crypt_key() when the last inode that references the key is evicted. However, when finding the fscrypt_direct_key for an inode, we weren't actually comparing the super_block pointer. As a result, inodes with different super_blocks could point to the same fscrypt_direct_key. That could extend the lifetime of a fscrypt_direct_key beyond the super_block it points to, causing a use-after-free later. Fix this by creating distinct fscrypt_direct_key structs for distinct super_block structs. Note that this problem doesn't exist in the v2 policy equivalent ("per-mode keys"), since the data structures there are per super_block. | Aug 10, 2026 |
| CVE-2026-68147(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: fscrypt: Avoid dynamic allocation in fscrypt_get_devices() When a blk_crypto_key starts being used or is evicted, fs/crypto/ calls fscrypt_get_devices() to get the filesystem's list of block devices, then iterates over them and calls blk_crypto_config_supported(), blk_crypto_start_using_key(), or blk_crypto_evict_key() on each one. Currently, the block device pointers are placed in a dynamically allocated array. This dynamic allocation is problematic because: - It can fail, especially at the fscrypt_destroy_inline_crypt_key() call site when it's invoked for inode eviction under direct reclaim. - fscrypt_destroy_inline_crypt_key() doesn't handle the failure. It just zeroizes and frees the blk_crypto_key without calling blk_crypto_evict_key(). That causes a use-after-free. For now, let's fix this in the straightforward and easily-backportable way by switching to an on-stack array. Currently the fscrypt multi-device functionality is used only by f2fs, which has a hardcoded limit of 8 block devices. An on-stack array works fine for that. (Of course, this solution won't scale up to large number of block devices. For that we'd need a different solution, like moving the block device iteration into the filesystem. Or in the case of btrfs, which will only support blk-crypto-fallback, we should make it just call blk-crypto-fallback directly, so the block devices won't be needed.) | Aug 10, 2026 |
| CVE-2026-68146(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ftrace: Add global mutex to serialize trace_parser access In ftrace, the trace_parser structure is allocated and initialized when a trace file is opened, and is subsequently used across write and release handlers to parse user input. The affected handler paths and their specific functions are: - Open paths: ftrace_regex_open(), ftrace_graph_open() - Write paths: ftrace_regex_write(), ftrace_graph_write() - Release paths: ftrace_regex_release(), ftrace_graph_release() If userspace opens a trace file descriptor and shares it across multiple threads, concurrent write calls will race on the parser's internal state, specifically the 'idx', 'cont', and 'buffer' fields, leading to corrupted input or undefined behavior. Fix this by adding a global mutex, parser_lock, to serialize all access to trace_parser across write and release paths, preventing concurrent corruption of parser state. | Aug 10, 2026 |
| CVE-2026-68145(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: iomap: fix out-of-bounds bitmap_set() with zero-length range ifs_set_range_dirty() and ifs_set_range_uptodate() compute last_blk as (off + len - 1) >> i_blkbits. When off is 0 and len is 0, the unsigned subtraction underflows to SIZE_MAX, producing a huge last_blk and nr_blks value that causes bitmap_set() to write far beyond the ifs->state allocation. Regarding ifs_set_range_uptodate(), it is temporarily safe because len cannot be passed in as 0. However, for ifs_set_range_dirty() this is reachable from __iomap_write_end(): when copy_folio_from_iter_atomic() returns 0 (e.g. user buffer fault) and the folio is already uptodate, the guard at the top of __iomap_write_end() does not trigger because !folio_test_uptodate() is false, and iomap_set_range_dirty() is called with copied == 0. Add a !len guard to both functions before the computation, so that a zero-length range is a no-op. | Aug 10, 2026 |
| CVE-2026-68144(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: phonet: pep: fix use-after-free in pep_get_sb() pep_get_sb() doesn't consider that pskb_may_pull() might have relocated the skb data, and continue to access the older pointer, causing UAF. Reproduced under KASAN: BUG: KASAN: slab-use-after-free in pep_get_sb+0x234/0x3b0 Read of size 1 at addr ff11000105510f50 by task repro/157 pep_get_sb+0x234/0x3b0 pipe_handler_do_rcv+0x5f7/0xa10 pep_do_rcv+0x203/0x410 __sk_receive_skb+0x471/0x4a0 phonet_rcv+0x5b3/0x6c0 __netif_receive_skb+0xcc/0x1d0 Refetch the header with skb_header_pointer() after pskb_may_pull(), so the possibly stale pointer is no longer dereferenced. There are better ways to solve this, but, this is the less instrusive one. | Aug 10, 2026 |
| CVE-2026-68143(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net: slip: serialize receive against buffer reallocation sl_realloc_bufs() replaces rbuff and updates buffsize while holding sl->lock. slip_receive_buf() reads those fields and writes through rbuff without holding the lock. An MTU change can therefore race with receive processing. An MTU shrink can expose the new smaller rbuff with the old larger bound, causing an out-of-bounds write. A receive callback which already loaded the old rbuff can instead continue writing after that buffer has been freed. Serialize receive processing with sl_realloc_bufs() by holding sl->lock while consuming each receive batch. | Aug 10, 2026 |
| CVE-2026-68142(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: geneve: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the sticky underlay netns geneve->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in geneve->net can rewrite a geneve device whose underlay lives in geneve->net. geneve_changelink() applies the new configuration against geneve->net: geneve_link_config() and the geneve_quiesce()/geneve_unquiesce() pair reopen the underlay sockets in that netns (geneve_sock_add() uses geneve->net), so the same reasoning as the tunnel changelink series applies here. Gate geneve_changelink() with rtnl_dev_link_net_capable(), at the top of the op before any attribute is parsed, matching ipgre_changelink() and the rest of the "require CAP_NET_ADMIN in the device netns for changelink" series. Found by 0sec automated security-research tooling (https://0sec.ai). | Aug 10, 2026 |
| CVE-2026-68141(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: net/af_iucv: fix NULL deref in afiucv_hs_callback_syn() afiucv_hs_callback_syn() allocates the child socket with GFP_ATOMIC. If the allocation fails, nsk is NULL. The connection-refused path is entered when the listen state check fails, the accept backlog is full, or nsk is NULL. The code unconditionally calls iucv_sock_kill(nsk) in that path. iucv_sock_kill() does not accept a NULL socket pointer and immediately dereferences sk via sock_flag(sk, SOCK_ZAPPED). When nsk is NULL, calling iucv_sock_kill(nsk) results in a NULL pointer dereference. Only call iucv_sock_kill() when a child socket was successfully allocated. | Aug 10, 2026 |
| CVE-2026-68140(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix use-after-free of a severed iucv_path af_iucv queues not-yet-received message notifications on iucv->message_q, each holding a raw pointer to the connection's iucv_path. When the peer severs the connection, iucv_sever_path() frees that path with iucv_path_free() but leaves the notifications queued. A later recvmsg() drains message_q via iucv_process_message_q() and hands the stale path to message_receive() -- a use-after-free of the freed iucv_path. Drop the queued notifications when the path is severed; once the path is gone they can no longer be received. This also frees the notifications leaked when a socket is closed with messages still queued. | Aug 10, 2026 |
| CVE-2026-68139(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Use sender devcom for MPV master-up After PCIe DPC recovery, mlx5 reloads the affected functions and replays multiport affiliation events. In the reported failure, the first relevant device error was: pcieport 0000:10:01.1: DPC: containment event pcieport 0000:10:01.1: PCIe Bus Error: severity=Uncorrected (Fatal) pcieport 0000:10:01.1: [ 5] SDES (First) mlx5 recovered the PCI functions and resumed 0000:11:00.1. During that resume, RDMA multiport binding replayed MLX5_DRIVER_EVENT_AFFILIATION_DONE and mlx5e sent MPV_DEVCOM_MASTER_UP. The host then panicked with: BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core] RDI: 0000000000000000 Call trace included: mlx5_devcom_comp_set_ready mlx5e_devcom_event_mpv mlx5_devcom_send_event mlx5_ib_bind_slave_port mlx5r_mp_probe mlx5_pci_resume MPV devcom registration publishes mlx5e private data to the component peer list before mlx5e_devcom_init_mpv() stores the returned component device in priv->devcom. A concurrent master-up event can therefore reach a peer whose private data is visible but whose priv->devcom backpointer is still NULL. MPV_DEVCOM_MASTER_UP already carries the sender/master mlx5e private data as event_data. The ready bit is stored on the shared devcom component, not on an individual peer. Use the sender devcom when marking the MPV component ready. This preserves the readiness transition while avoiding a NULL dereference of the peer devcom pointer during affiliation replay after PCI error recovery. | Aug 10, 2026 |
| CVE-2026-68138(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net/sched: serialize qdisc_rtab_list against concurrent get/put qdisc_get_rtab() and qdisc_put_rtab() mutate the process-global singly linked list qdisc_rtab_list and a plain non-atomic 'int refcnt' with no lock. This was only safe because every caller historically held the RTNL mutex, which serialized all rate-table lookups, inserts and frees. That invariant no longer holds. cls_flower sets TCF_PROTO_OPS_DOIT_UNLOCKED, so tc_new_tfilter() keeps rtnl_held == false for it and sets TCA_ACT_FLAGS_NO_RTNL. That flag propagates through tcf_exts_validate_ex() -> tcf_action_init() -> tcf_action_init_1() -> tcf_police_init(), which calls qdisc_get_rtab()/qdisc_put_rtab() with the RTNL mutex NOT held. Two RTM_NEWTFILTER requests on different CPUs, each adding a flower filter with a police action carrying the same rate, then race on qdisc_rtab_list and on the non-atomic refcnt, leading to a use-after-free / double-free of the kmalloc-2k struct qdisc_rate_table. qdisc_rtab_list is a single global (not per-netns), so the corrupted object is shared system-wide. BUG: KASAN: slab-use-after-free in qdisc_put_rtab+0x12f/0x160 qdisc_put_rtab+0x12f/0x160 tcf_police_init+0xda9/0x1590 tcf_action_init_1+0x460/0x6b0 tcf_action_init+0x439/0xa40 tcf_exts_validate_ex+0x42d/0x550 fl_change+0xddd/0x7da0 tc_new_tfilter+0xaa7/0x2420 rtnetlink_rcv_msg+0x95e/0xe90 which belongs to the cache kmalloc-2k of size 2048 Protect qdisc_rtab_list and the refcount with a dedicated spinlock. The (sleeping, GFP_KERNEL) allocation in qdisc_get_rtab() is performed before taking the lock; if a concurrent inserter added an identical table in the meantime the freshly allocated one is freed under the lock, so no duplicate is leaked. qdisc_put_rtab() now decrements the refcount and unlinks under the same lock. | Aug 10, 2026 |
| CVE-2026-68137(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: net/x25: fix use-after-free in x25_kill_by_neigh() x25_kill_by_neigh() walks the global X.25 socket list looking for sockets attached to a terminating neighbour. x25_list_lock protects list membership while the lookup is in progress, but it does not pin a socket's lifetime after the lock is dropped. The function currently drops x25_list_lock before calling lock_sock(s). A concurrent close can run x25_release(), remove the same socket from x25_list, and drop the last socket reference in that window. The neighbour teardown path can then lock or inspect a freed struct sock/struct x25_sock. Take sock_hold(s) while x25_list_lock still proves that the list entry is live, then drop the temporary reference after the socket has been locked, rechecked, and released. Recheck x25_sk(s)->neighbour after lock_sock(), because another path may have disconnected the socket before this path acquired the socket lock. Restart the list walk after each disconnect because the list lock was dropped and the previous iterator state may no longer be valid. A QEMU/KASAN run against origin/master reproduced a slab-use-after-free in x25_kill_by_neigh(). | Aug 10, 2026 |
| CVE-2026-68136(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: net: gro: fix double aggregation of flush-marked skbs Commit 0ab03f353d36 ("net-gro: Fix GRO flush when receiving a GSO packet.") added a flush check to skb_gro_receive(), but skb_gro_receive_list() lacks the same validation. As a result, packets marked with NAPI_GRO_CB(skb)->flush may still be re-aggregated. This allows already-GRO'd packets with existing frag_list to be re-aggregated into a new GRO session, corrupting the frag_list chain structure. When skb_segment() attempts to unpack these malformed packets, it encounters invalid state and triggers a kernel panic. Scenario (Tethering/Device forwarding): 1. Driver: Generated aggregated packet P1 via LRO with frag_list 2. Dev A: Receives aggregated fraglist packet and flush flag set 3. Dev A: Re-enters GRO, skb_gro_receive_list() is called 4. Missing flush check allows re-aggregation despite flush flag 5. Frag_list chain becomes corrupted (loops or dangling refs) 6. Dev B: TX path calls skb_segment(), crashes on corrupted frag_list Root cause in skb_segment(): The check at line ~4891: if (hsize <= 0 && i >= nfrags && skb_headlen(list_skb) && (skb_headlen(list_skb) == len || sg)) { When frag_list is corrupted by double aggregation, when list_skb is a NULL pointer from skb->next, skb_headlen(list_skb) dereference NULL/corrupted pointers occurs. Call Trace: skb_headlen(NULL skb) skb_segment tcp_gso_segment tcp4_gso_segment inet_gso_segment skb_mac_gso_segment __skb_gso_segment skb_gso_segment validate_xmit_skb validate_xmit_skb_list sch_direct_xmit qdisc_restart __qdisc_run qdisc_run net_tx_action Fix: Add NAPI_GRO_CB(skb)->flush validation to the early-return check in skb_gro_receive_list(), matching the defensive programming pattern of skb_gro_receive(). | Aug 10, 2026 |
| CVE-2026-68135(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: net: hip04: fix RX buffer leak on build_skb failure When build_skb() fails in hip04_rx_poll(), the driver jumps to the refill path without releasing the current RX buffer and its DMA mapping. Installing a replacement buffer then overwrites the slot references and leaks both resources. Keep the current slot intact and return budget so NAPI retries the same buffer. Also free a newly allocated RX fragment when dma_map_single() fails. This issue was found by an in-house static analysis tool. | Aug 10, 2026 |
| CVE-2026-68134(opens NVD record) | High | 7.3 | In the Linux kernel, the following vulnerability has been resolved: ptp: ptp_s390: Add missing facility check Only register the physical clock when facility 28 is installed and PTFF QAF returns that PTFF QPT is available. | Aug 10, 2026 |
| CVE-2026-68133(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ice: fix PTP Call Trace during PTP release If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will result in the following PTP release call trace during driver unload: kernel BUG at lib/list_debug.c:52! ice_ptp_release+0x332/0x3c0 [ice] ice_deinit_features.part.0+0x10e/0x120 [ice] ice_remove+0x100/0x220 [ice] This was observed when passing PF1 through to a VM. ice_ptp_init() fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT. Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and returning without error, preventing the invalid state transition to ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from ICE_PTP_RESETTING after a failed rebuild. | Aug 10, 2026 |
| CVE-2026-68132(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: super: fix emergency thaw deadlock on frozen block devices do_thaw_all_callback() calls bdev_thaw() while holding sb->s_umount exclusively. If the block device was frozen via bdev_freeze() dropping the last block layer freeze reference calls fs_bdev_thaw() which reacquires s_umount: do_thaw_all_callback(sb) super_lock_excl(sb) # holds sb->s_umount bdev_thaw(sb->s_bdev) mutex_lock(&bdev->bd_fsfreeze_mutex) # bd_fsfreeze_count drops 1 -> 0 bd_holder_ops->thaw == fs_bdev_thaw get_bdev_super(bdev) bdev_super_lock(bdev, true) super_lock(sb, true) down_write(&sb->s_umount) # same task: deadlock The emergency thaw worker deadlocks against itself holding both s_umount and bd_fsfreeze_mutex. That fscks any subsequent unmount, freeze, or thaw of that filesystem and block device. [ 81.878470] sysrq: Show Blocked State [ 81.880140] task:kworker/0:1 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208060 flags:0x00080000 [ 81.884876] Workqueue: events do_thaw_all [ 81.886656] Call Trace: [ 81.887759] <TASK> [ 81.888763] __schedule+0x579/0x1420 [ 81.890372] schedule+0x3a/0x100 [ 81.891794] schedule_preempt_disabled+0x15/0x30 [ 81.893848] rwsem_down_write_slowpath+0x1ea/0x900 [ 81.895191] ? __pfx_do_thaw_all_callback+0x10/0x10 [ 81.896528] down_write+0xbd/0xc0 [ 81.897505] super_lock+0x91/0x180 [ 81.898457] ? __mutex_lock+0xa99/0x1140 [ 81.900748] ? __mutex_unlock_slowpath+0x1f/0x400 [ 81.902069] bdev_super_lock+0x5b/0x150 [ 81.903132] get_bdev_super+0x10/0x60 [ 81.904042] fs_bdev_thaw+0x23/0xf0 [ 81.904755] bdev_thaw+0x82/0x100 [ 81.905484] do_thaw_all_callback+0x2c/0x50 [ 81.906298] __iterate_supers+0x5d/0x130 [ 81.907067] do_thaw_all+0x20/0x40 [ 81.907739] process_one_work+0x206/0x5e0 [ 81.908545] worker_thread+0x1e2/0x3c0 [ 81.909339] ? __pfx_worker_thread+0x10/0x10 [ 81.910171] kthread+0xf4/0x130 [ 81.910799] ? __pfx_kthread+0x10/0x10 [ 81.911528] ret_from_fork+0x2e2/0x3b0 [ 81.912259] ? __pfx_kthread+0x10/0x10 [ 81.913010] ret_from_fork_asm+0x1a/0x30 [ 81.913806] </TASK> bdev_super_lock() even documents the violated requirement with lockdep_assert_not_held(&sb->s_umount). Acquiring bd_fsfreeze_mutex under s_umount also inverts the bd_fsfreeze_mutex vs. s_umount ordering established by bdev_{freeze,thaw}() and can thus ABBA against a concurrent block-layer freeze even when the recursive path isn't hit. Fix this by not holding s_umount around the bdev_thaw() loop at all. Pin the superblock with an active reference instead as filesystems_freeze_callback() does. The active reference keeps the superblock from being shut down and so ->s_bdev stays valid without holding s_umount. The block-layer-held freeze is dropped by fs_bdev_thaw() with FREEZE_MAY_NEST | FREEZE_HOLDER_USERSPACE exactly as a regular unfreeze would and thaw_super_locked() handles filesystem-level freezes as before. The emergency thaw path has deadlocked like this in one form or another for a long long time but the current exclusively-held shape dates back to commit [1] where thaw_bdev() already ended in thaw_super() with s_umount held by do_thaw_all_callback(). | Aug 10, 2026 |
| CVE-2026-68131(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: rbd: Reset positive result codes to zero in object map update path In a reply message to an RBD request, a positive result code indicates a data payload, which is not allowed for writes. While rbd_osd_req_callback() already resets a positive result code for writes to zero, rbd_object_map_callback() does not. This allows a corrupted reply to an object map update to trigger the rbd_assert(*result < 0) in __rbd_obj_handle_request(). This happens, because rbd_object_map_callback() calls rbd_obj_handle_request() -> __rbd_obj_handle_request() and passes this positive result code. From __rbd_obj_handle_request(), rbd_obj_advance_write() is called, which leaves the positive result code unchanged and returns true. Therefore, the if(done && *result) branch is executed in __rbd_obj_handle_request() and the assertion triggers. This patch fixes the issue by adjusting the logic in the rbd_object_map_callback() path. A positive result code for an object map update is now reset to zero (similar to rbd_osd_req_callback()), and the message is subsequently handled the same way as if the result code was zero from the beginning. Additionally, a WARN_ON_ONCE() is added for this case. | Aug 10, 2026 |
| CVE-2026-68130(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer destroy_previous_session() until after NTLM authentication In ntlm_authenticate(), destroy_previous_session() is called using a user pointer resolved from the client-supplied NTLM blob username field before the NTLMv2 response is validated. An authenticated attacker can set the NTLM blob username to match a victim account and set PreviousSessionId to the victim's session ID; destroy_previous_session() destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob() subsequently rejects the request with -EPERM. Move destroy_previous_session() and the prev_id assignment to after ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user rather than the pre-authentication lookup result. This matches the ordering already used by krb5_authenticate(), where destroy_previous_session() is called only after ksmbd_krb5_authenticate() returns success. | Aug 10, 2026 |
| CVE-2026-68129(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: gve: fix Rx queue stall on alloc failure When the system is under extreme memory pressure, page allocations can fail during the Rx buffer refill loop. If the number of buffers posted to hardware falls below a critical low threshold and the refill loop exits due to allocation failures, the queue can stall: 1. The device drops incoming packets because there are no descriptors. 2. Since no packets are processed, no Rx completions are generated. 3. Because no completions occur, NAPI is never scheduled, preventing the refill loop from running again even after memory is freed. This results in a permanent queue stall. Resolve this by introducing a starvation recovery timer for each Rx queue. If the number of buffers posted to hardware falls below a critical low threshold, start a timer to periodically reschedule NAPI. Once NAPI runs and successfully refills the queue above the threshold, the timer is not rescheduled. The threshold is set to 32 because a single maximum-sized Receive Segment Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path. Lower thresholds (such as 8 or 16) would be insufficient to process a complete maximum-sized RSC packet, risking packet drops or unexpected hardware behavior under memory pressure. Setting the threshold to 32 guarantees a safe margin to handle at least one full RSC packet. | Aug 10, 2026 |
| CVE-2026-68128(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: ice: reject out-of-range ptype in ice_parser_profile_init set_bit(rslt->ptype, prof->ptypes) operates on a DECLARE_BITMAP of ICE_FLOW_PTYPE_MAX (1024) bits. Nothing prevents a malicious VF from providing ptype >= 1024 through VIRTCHNL, resulting in a write past the end of the bitmap and a kernel page fault. Reproduced with a custom kernel module injecting a crafted VIRTCHNL_OP_ADD_RSS_CFG on E810-C QSFP (8086:1592), FW 4.91 0x800214af 1.3909.0, ICE COMMS DDP 1.3.53.0, kernel 7.1.0-rc1. crash_parser: ice_parser_profile_init @ ffffffffc0d61b60 crash_parser: setting ptype=0xffff (max valid=1023) crash_parser: calling ice_parser_profile_init -- expect OOB crash! BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0002 [#1] SMP NOPTI CPU: 56 UID: 0 PID: 165011 Comm: insmod Kdump: loaded Tainted: G S U OE 7.1.0-rc1 #1 Hardware name: Intel Corporation S2600BPB/S2600BPB RIP: 0010:ice_parser_profile_init+0x2d/0x1d0 [ice] Call Trace: <TASK> ? __pfx_ice_parser_profile_init+0x10/0x10 [ice] crash_init+0x127/0xff0 [crash_parser] do_one_initcall+0x45/0x310 do_init_module+0x64/0x270 init_module_from_file+0xcc/0xf0 idempotent_init_module+0x17b/0x280 __x64_sys_finit_module+0x6e/0xe0 Bail out early with -EINVAL when ptype is out of range. | Aug 10, 2026 |
| CVE-2026-68127(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: ila: reload IPv6 header after pskb_may_pull in checksum adjust ila_csum_adjust_transport() caches ip6h = ipv6_hdr(skb) before calling pskb_may_pull(). On a non-linear skb whose transport header sits in a page fragment, pskb_may_pull() can call __pskb_pull_tail() / pskb_expand_head() and free the old skb head, leaving ip6h dangling; the following get_csum_diff(ip6h, p) then reads freed memory. ila_update_ipv6_locator() uses ip6h (and the iaddr derived from it) again after the csum-adjust call and additionally writes the new locator through that pointer. Impact: a remote IPv6 packet routed through a configured ILA csum-adjust-transport route or receive-side mapping triggers a slab-use-after-free in ila_update_ipv6_locator() (KASAN). The route or mapping requires CAP_NET_ADMIN to configure, but trigger packets are unauthenticated once it exists. Reload ip6h after each pskb_may_pull() in ila_csum_adjust_transport() before the csum-diff read. In ila_update_ipv6_locator() only the ILA_CSUM_ADJUST_TRANSPORT case pulls the skb, so reload ip6h and iaddr in that case alone before the destination-address write; the neutral-map modes never pull and keep their cached pointers. | Aug 10, 2026 |
| CVE-2026-68126(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: mac802154: hold an interface reference across the scan worker mac802154_scan_worker() captures the scanning sub-interface under RCU and then keeps dereferencing sdata->dev after rcu_read_unlock() and outside the rtnl -- in the failure traces, in mac802154_transmit_beacon_req() (skb->dev = sdata->dev), and in the end_scan cleanup. Nothing keeps that netdev alive across the worker iteration. A concurrent DEL_INTERFACE or PHY removal can unregister the interface once the worker drops the rtnl between its two drv_set_channel() sections. unregister_netdevice() frees the netdev asynchronously from netdev_run_todo() with the rtnl already dropped, so neither holding the rtnl nor the per-PHY IEEE802154_IS_SCANNING flag prevents a stale worker iteration from dereferencing the freed netdev -- a KASAN slab-use-after-free, reachable by racing TRIGGER_SCAN against DEL_INTERFACE (both CAP_NET_ADMIN). Pin the netdev with netdev_hold() while the RCU read lock is still held, and release it at every worker exit. | Aug 10, 2026 |
| CVE-2026-68125(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: mac802154: llsec: reject frames shorter than the authentication tag llsec_do_decrypt_auth() computes the associated-data length for the AEAD request as assoclen += datalen - authlen; where datalen is the number of bytes after the MAC header and authlen (4, 8 or 16) is the length of the authentication tag. Nothing verifies that the frame actually carries at least authlen payload bytes. A secured frame whose payload is shorter than the tag makes datalen - authlen negative; assoclen is then passed to aead_request_set_ad() as an unsigned value close to 4 GiB, so crypto_aead_decrypt() walks far off the end of the scatterlist that only spans the real frame. The frame is fully attacker-controlled and reaches this path from any IEEE 802.15.4 peer in radio range. Reject frames whose payload is shorter than the authentication tag before the subtraction. Dynamically reproduced on a KASAN kernel as a general-protection-fault in the AEAD scatterwalk, and the fix confirmed. | Aug 10, 2026 |
| CVE-2026-68124(opens NVD record) | Critical | 9.6 | In the Linux kernel, the following vulnerability has been resolved: mctp: serial: handle zero-length frames to prevent rx buffer overflow The MCTP serial receive state machine reads a frame length byte in mctp_serial_push_header() case 2 and validates it upper-bound-only: if (c > MCTP_SERIAL_FRAME_MTU) { dev->rxstate = STATE_ERR; } else { dev->rxlen = c; dev->rxpos = 0; dev->rxstate = STATE_DATA; ... } A length of zero passes this check, so rxlen is set to 0 and the state machine advances to STATE_DATA. In mctp_serial_push() STATE_DATA, the incoming byte is stored and rxpos incremented before the terminator is dev->rxbuf[dev->rxpos] = c; dev->rxpos++; dev->rxstate = STATE_DATA; if (dev->rxpos == dev->rxlen) { dev->rxpos = 0; dev->rxstate = STATE_TRAILER; } With rxlen == 0 the "rxpos == rxlen" terminator can never fire (rxpos is already 1 on the first data byte), so subsequent bytes are written past the end of the fixed 74-byte rxbuf, which is the last member of the netdev private area. Every following data byte is an attacker-controlled 1-byte out-of-bounds heap write, and the overflow continues until a frame (0x7e) or escape byte resets the parser -- effectively unbounded. Reaching this requires CAP_NET_ADMIN to attach the N_MCTP line discipline and bring the resulting mctpserialN netdev up, after which the bytes arrive via the tty receive path. Route a zero-length frame straight to STATE_TRAILER instead of STATE_DATA. The trailer/framing bytes are still consumed, and the frame resolves to a zero-length skb that the MCTP core rejects; the parser never enters STATE_DATA with rxlen == 0, so the out-of-bounds write can no longer occur. KASAN, on a frame of 0x7e 0x01 0x00 followed by data bytes (before this change): UBSAN: array-index-out-of-bounds in drivers/net/mctp/mctp-serial.c:370 index 74 is out of range for type 'u8 [74]' BUG: KASAN: slab-out-of-bounds in mctp_serial_tty_receive_buf Write of size 1 at addr ... by task kworker/u16:0 mctp_serial_tty_receive_buf tty_ldisc_receive_buf flush_to_ldisc Allocated by task 152: alloc_netdev_mqs mctp_serial_open v2: route zero-length frames to STATE_TRAILER instead of STATE_ERR so the trailer/framing bytes are still consumed (Jeremy Kerr). Found by 0sec automated security-research tooling (https://0sec.ai). | Aug 10, 2026 |
| CVE-2026-68123(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix GSO userspace truncation underflow OVS_ACTION_ATTR_TRUNC currently stores a delta from the original skb length in OVS_CB(skb)->cutlen. When a later userspace action segments a GSO skb, queue_gso_packets() reuses that delta for each smaller segment. A segment can then reach queue_userspace_packet() with cutlen greater than skb->len, underflowing the length passed to skb_zerocopy(). Store the maximum preserved length instead and bound each consumer against the current skb length. Use U32_MAX as the no-truncation sentinel so the value remains valid if skb geometry changes before a consumer handles it. | Aug 10, 2026 |
| CVE-2026-68122(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ovpn: fix peer refcount leak in TCP error paths When either the TCP RX or TX error path calls ovpn_peer_hold() followed by schedule_work(&peer->tcp.defer_del_work), and the work item is already pending from the other path, schedule_work() returns false and the work runs only once. Since ovpn_tcp_peer_del_work() calls ovpn_peer_put() exactly once, the extra reference taken by the losing path is never dropped, leaking the peer object. The race window: CPU0 (strparser/RX error): CPU1 (tcp_tx_work/TX error): ovpn_peer_hold() <- refcnt+1 ovpn_peer_hold() <- refcnt+2 schedule_work() <- queued schedule_work() <- NO-OP (work already pending) ovpn_tcp_peer_del_work runs: ovpn_peer_del() ovpn_peer_put() <- refcnt+1 <- peer never freed Fix by checking the return value of schedule_work() in both paths and calling ovpn_peer_put() to drop the extra reference if the work was already pending. ovpn_peer_hold() is kept unconditional in the TX path as it cannot fail at that point. | Aug 10, 2026 |
| CVE-2026-68121(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: pppoe: reload header pointer after dev_hard_header() pppoe_sendmsg() saves a pointer to the PPPoE header before calling dev_hard_header(). Device header callbacks are allowed to reallocate the skb head, invalidating pointers into it. This can happen when a send is blocked in copy_from_user() while the first non-Ethernet port is added to an empty team device. The team's delegated GRE header callback then expands the skb head. PPPoE subsequently writes six bytes through the stale pointer into the freed head. Reload the PPPoE header through the skb's network-header offset after device header creation. pskb_expand_head() updates that offset when it relocates the head. | Aug 10, 2026 |
| CVE-2026-68120(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: rtase: Workaround for TX hang caused by hardware packet parsing The hardware performs packet parsing before packet transmission. Parsing incomplete IPv4, IPv6, TCP, or UDP headers may trigger a TX hang because the hardware parser expects additional protocol header data that is not present in the packet. The hardware performs additional PTP parsing on UDP packets identified by destination ports 319/320 at the expected UDP destination port offset. If such a packet has transport data smaller than RTASE_MIN_PAD_LEN, the hardware parser expects additional packet data and may trigger a TX hang. To avoid these hardware issues, the driver applies the following workarounds. Drop malformed packets that may trigger this hardware issue before transmission. For IPv4 non-initial fragments, the hardware does not check the fragment offset before parsing the expected transport header location. As a result, these packets are still subject to transport header parsing even though they do not contain a transport header. If the transport data is shorter than the minimum transport header required by the hardware parser, pad the transport data to the minimum transport header length required by the hardware parser. Packets that also match the hardware PTP parsing conditions continue to follow the corresponding workaround. For IPv6 fragmented packets, neither of the above hardware issues occurs because the hardware only continues packet parsing when the IPv6 Base Header Next Header field directly indicates UDP. Packets carrying a Fragment Header do not continue through the subsequent packet parsing stages. For packets identified for hardware PTP parsing, pad the transport data so it reaches RTASE_MIN_PAD_LEN before transmission. | Aug 10, 2026 |
| CVE-2026-68119(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: tcp: initialize standalone TCP-AO response padding tcp_v4_send_ack() and tcp_v6_send_response() construct standalone TCP responses with TCP-AO options. The option length carries the actual MAC length, but the TCP header length includes the option rounded up to a four-byte boundary. tcp_ao_hash_hdr() writes the MAC only. Thus, when the MAC length is not four-byte aligned, the one to three bytes after the MAC are left uninitialized and may be transmitted. For the normal TCP-AO hashing mode, those bytes also have to be initialized before computing the MAC. Initialize only the alignment padding in the TCP-AO branches, before hashing the header. Use TCPOPT_NOP, as in the normal TCP-AO output path. This avoids adding work to non-AO TCP responses while preserving a valid authenticated header. | Aug 10, 2026 |
| CVE-2026-68118(opens NVD record) | High | 8.2 | In the Linux kernel, the following vulnerability has been resolved: tcp: challenge ACK for non-exact RST in SYN-RECEIVED The SYN-RECEIVED request-socket path in tcp_check_req() accepts an in-window RST without requiring SEG.SEQ to exactly match RCV.NXT. A non-exact RST therefore removes the request instead of eliciting a challenge ACK. RFC 9293 section 3.10.7.4 applies the RFC 5961 reset check in SYN-RECEIVED: an exact RST resets the connection, while a non-exact in-window RST must trigger a challenge ACK and be dropped. Apply that check before the ACK-field validation, following the RFC sequence-number, RST, then ACK processing order. Factor the per-netns challenge ACK quota out of tcp_send_challenge_ack() so request sockets can share it. Use the request socket's send_ack() callback and its own out-of-window ACK timestamp to send and rate-limit the response. | Aug 10, 2026 |
| CVE-2026-68117(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: tipc: clear sock->sk on the failed-insert path in tipc_sk_create() When tipc_sk_create() fails to insert the new socket (tipc_sk_insert() returns non-zero), its error path frees the sk with sk_free() but leaves sock->sk pointing at the freed object: if (tipc_sk_insert(tsk)) { sk_free(sk); pr_warn("Socket create failed; port number exhausted\n"); return -EINVAL; } This is harmless for plain socket(): the syscall layer clears sock->ops before releasing, so tipc_release() is never called. It is not harmless on the accept() path. tipc_accept() creates the pre-allocated child socket with tipc_sk_create(net, new_sock, 0, kern); on failure it leaves new_sock->sk dangling and new_sock->ops non-NULL, and do_accept() then fput()s the new file, so __sock_release() -> tipc_release() runs lock_sock(new_sock->sk) on the freed sk -- a use-after-free write of the sk_lock spinlock. tipc_release() already guards this exact "failed accept() releases a pre-allocated child" case with "if (sk == NULL) return 0;", but the guard is bypassed because tipc_sk_create() left sock->sk non-NULL (dangling) rather than NULL. Clear sock->sk on the failed-insert path so the existing tipc_release() NULL check fires and the use-after-free is avoided. The tipc_sk_insert() failure is reached when the per-netns socket rhashtable hits its max_size (tsk_rht_params.max_size = 1048576, ~2M elements) -- i.e. once a netns holds ~2M TIPC sockets every insert returns -E2BIG. BUG: KASAN: slab-use-after-free in lock_sock_nested (net/core/sock.c:3839) Write of size 8 at addr ffff8880047cdc38 by task init/1 lock_sock_nested (net/core/sock.c:3839) tipc_release (net/tipc/socket.c:638) __sock_release (net/socket.c:710) sock_close (net/socket.c:1501) __fput (fs/file_table.c:512) Allocated by task 1: sk_alloc (net/core/sock.c:2308) tipc_sk_create (net/tipc/socket.c:487) tipc_accept (net/tipc/socket.c:2744) do_accept (net/socket.c:2034) Freed by task 1: __sk_destruct (net/core/sock.c:2391) tipc_sk_create (net/tipc/socket.c:504) tipc_accept (net/tipc/socket.c:2744) do_accept (net/socket.c:2034) | Aug 10, 2026 |
| CVE-2026-68116(opens NVD record) | High | 7.9 | In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix source list corruption on a failed replace When replacing the source list of an MDB remote entry, all existing sources are first marked for deletion and vxlan_mdb_remote_srcs_add() is then called to add the new source list. Sources present in the new list have their deletion mark cleared, and any sources left marked afterwards are removed. If vxlan_mdb_remote_srcs_add() fails partway through, its error path deletes all entries on the remote's source list. That rollback is only correct for its other caller, vxlan_mdb_remote_add(), where the remote was just allocated and the list contains solely entries added during the call. On the replace path the list also holds pre-existing sources, so a failed replace tears them down together with their (S, G) forwarding entries instead of leaving the entry unchanged. This is reachable from an existing (*, G) remote. An EXCLUDE filter that loses sources starts forwarding traffic that should be blocked, while an INCLUDE filter that loses sources drops traffic that should be forwarded. Mark entries created during the current pass with a new VXLAN_SGRP_F_NEW flag. On failure, delete only those entries and clear the deletion mark on the pre-existing ones, so a failed replace leaves the source list untouched. Retain the flag until the whole operation succeeds and then clear it. Also stop vxlan_mdb_remote_src_add() from deleting a pre-existing entry it only looked up when adding that entry's forwarding entry fails. | Aug 10, 2026 |
| CVE-2026-68115(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx10: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit ac6f00beb658239bced4aaed9efbb04a35348d48) | Aug 10, 2026 |
| CVE-2026-68114(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx12.1: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit e4d99e04b2e9b13b97d3b17804c735f62689db23) | Aug 10, 2026 |
| CVE-2026-68113(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx12: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit f952076f76d62f783e8ba4995a7c400d39354ccf) | Aug 10, 2026 |
| CVE-2026-68112(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx9.4.3: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit 5676593d08998d7a6d9e2d51d6b54b3820e3755c) | Aug 10, 2026 |
| CVE-2026-68111(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx9: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054) | Aug 10, 2026 |