Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
109,390 matching · page 186/2188Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-98382(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: bpf: Reject dev-bound-only programs on other devices __bpf_offload_dev_match() falls back to comparing offdev pointers after an exact netdev mismatch. Bound-only programs normally have NULL offdevs, so unrelated netdevs compare equal. A bound-only program on an offload-registered netdev can instead inherit a real offdev and match a sibling port. With CAP_BPF and CAP_NET_ADMIN, a caller can use bpf(BPF_LINK_CREATE) with a different target ifindex to run metadata kfuncs specialized for the bound driver on the target driver's xdp_buff. Running a veth-bound program on tun reads beyond tun's bare stack xdp_buff as a veth_xdp_buff. Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:veth_xdp_rx_timestamp (drivers/net/veth.c:1673) Call Trace: ... tun_build_skb (drivers/net/tun.c:1739) tun_get_user (drivers/net/tun.c:1856) tun_chr_write_iter (drivers/net/tun.c:2091) vfs_write (fs/read_write.c:595 fs/read_write.c:687) ksys_write (fs/read_write.c:739) do_syscall_64 (arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception in interrupt Restrict non-offloaded programs to exact netdev matches and retain the shared-offdev fallback only for genuinely offloaded multi-port programs. | Oct 9, 2026 |
| CVE-2026-98381(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: veth: manage XDP program pointers during channel resize veth_set_channels() tears down XDP resources for removed RX queues without clearing rq->xdp_prog. If the program is then detached or replaced, those queues keep the old pointer after bpf_prog_put(). A later channel increase can re-enable NAPI and run the freed program. BUG: unable to handle page fault for address: ffffc90000256048 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: veth_xdp_rcv_skb (include/linux/filter.h:779 include/net/xdp.h:696 drivers/net/veth.c:820) Call Trace: veth_xdp_rcv (drivers/net/veth.c:941) veth_poll (drivers/net/veth.c:986) __napi_poll (net/core/dev.c:7787) net_rx_action (net/core/dev.c:7850 net/core/dev.c:8007) handle_softirqs (kernel/softirq.c:645) Kernel panic - not syncing: Fatal exception in interrupt | Oct 9, 2026 |
| CVE-2026-98380(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: net/sched: reject IDR error pointers when deleting actions tcf_action_delete() drops the reference held by its lookup before calling tcf_idr_delete_index() with the saved action index. An unlocked classifier can remove that action and reserve the same IDR slot with ERR_PTR(-EBUSY) in between. tcf_idr_delete_index() only checks the lookup result for NULL. It therefore treats the reservation as a tc_action and dereferences tcfa_bindcnt. A hardware execution breakpoint was used to schedule the interleaving without changing the kernel source. KASAN reported this decoded trace: BUG: KASAN: null-ptr-deref in tca_action_gd+0x5b9/0x1010 Read of size 4 at addr 0000000000000010 by task poc/150 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002 RIP: tca_action_gd+0x5c0/0x1010: arch_atomic_read at arch/x86/include/asm/atomic.h:23 raw_atomic_read at include/linux/atomic/atomic-arch-fallback.h:457 atomic_read at include/linux/atomic/atomic-instrumented.h:33 tcf_idr_delete_index at net/sched/act_api.c:766 tcf_action_delete at net/sched/act_api.c:1859 tcf_del_notify at net/sched/act_api.c:2014 tca_action_gd at net/sched/act_api.c:2064 R13: 0000000000000010 R15: fffffffffffffff0 Kernel panic - not syncing: Fatal exception R15 contains ERR_PTR(-EBUSY), and adding the tcfa_bindcnt offset produces the address in R13. With the guard applied, the same reproducer returned -ENOENT without a KASAN report or panic. Treat error pointers as absent and return -ENOENT. | Oct 9, 2026 |
| CVE-2026-98379(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_rpfilter: reject routes without inet6_dev ip6_route_lookup() can return an error-free route whose rt6i_idev is NULL. Lowering an external nexthop device's MTU below IPV6_MIN_MTU tears down its inet6_dev while fib6_ifdown() leaves routes using nexthop objects in the FIB. An unprivileged user can construct this state with rtnetlink in a private user and network namespace, then trigger a NULL dereference through an IPv6 rpfilter lookup: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: rpfilter_mt (net/ipv6/netfilter/ip6t_rpfilter.c:75) Call Trace: ip6t_do_table (net/ipv6/netfilter/ip6_tables.c:316) nf_hook_slow (net/netfilter/core.c:619) ipv6_rcv (net/ipv6/ip6_input.c:351) __netif_receive_skb_one_core (net/core/dev.c:6216) process_backlog (net/core/dev.c:6680) __napi_poll (net/core/dev.c:7739) net_rx_action (net/core/dev.c:7959) handle_softirqs (kernel/softirq.c:622) do_softirq.part.0 (kernel/softirq.c:523) __local_bh_enable_ip (kernel/softirq.c:450) __dev_queue_xmit (net/core/dev.c:4913) packet_sendmsg (net/packet/af_packet.c:3139) __sys_sendto (net/socket.c:2252) __x64_sys_sendto (net/socket.c:2259) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception in interrupt Reject routes without an inet6_dev immediately after lookup. Such routes are not eligible for reverse-path filtering, and the check protects all later rt6i_idev dereferences. | Oct 9, 2026 |
| CVE-2026-98378(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: bpf: Skip unsettled links in link iterator bpf_link_prime() inserts a link into link_idr before anon_inode_getfile() succeeds and before bpf_link_settle() publishes the ID in link->id. bpf_link_by_id() treats such an ID-zero link as unsettled, but the link iterator takes a reference without this check. If anon_inode_getfile() then fails, the creator removes the ID and frees its still-private link directly. The iterator is left with a dangling reference and its next bpf_link_put() accesses freed memory. Treat ID-zero entries as transient in bpf_link_get_curr_or_next(), just as bpf_link_by_id() does. BUG: KASAN: slab-use-after-free in bpf_link_put Write of size 8 by task exp/384 Call Trace: bpf_link_put kernel/bpf/syscall.c:3372 bpf_link_seq_next kernel/bpf/link_iter.c:33 bpf_seq_read kernel/bpf/bpf_iter.c:158 vfs_read fs/read_write.c:572 ksys_read fs/read_write.c:716 do_syscall_64 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:121 Kernel panic - not syncing: KASAN: panic_on_warn set ... | Oct 9, 2026 |
| CVE-2026-98377(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: vlan: require the MAC header to be present in __vlan_insert_inner_tag() __vlan_insert_inner_tag() only guarantees head room via skb_cow_head(), never that mac_len bytes of MAC header are present. Its ETH_HLEN wrappers - __vlan_insert_tag() under skb_vlan_push(), and vlan_insert_tag() under validate_xmit_vlan() on the generic transmit path - therefore rewrite the first 16 bytes at skb->data: a 12-byte memmove plus two 2-byte stores at +12 and +14. No caller supplies the bound, while the pop helpers use skb_ensure_writable()/pskb_may_pull(). An IFF_TUN device has hard_header_len == 0, so packet_snd() accepts a one-byte AF_PACKET/SOCK_RAW frame. The first vlan push only sets a hwaccel tag; the next - clsact "action vlan push" or bpf_skb_vlan_push() - enters the helper with skb->len still 1. The head comes from skbuff_small_head without __GFP_ZERO, so each push drags bytes from beyond skb->tail into the frame. After three the one-byte send leaves as 13 bytes carrying 11 bytes of uninitialised slab: 0000: 5a b3 62 12 80 88 ff ff 00 b3 62 12 81 `------------------------------' only 0x5a was sent; the rest is slab, here the top 56 bits of a linear-map address Require the MAC header the helper rewrites to be present, so such a frame is dropped rather than transmitted. | Oct 9, 2026 |
| CVE-2026-98376(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: bpf: Use array_map_meta_equal for percpu array inner map replacement percpu_array_map_ops.map_meta_equal points to the generic bpf_map_meta_equal(), which does not compare max_entries. When a percpu array serves as an inner map, replacing it with one that has fewer max_entries bypasses the check. Since percpu_array_map_gen_lookup() inlines the original template's index_mask as a JIT immediate, a lookup on the replacement map can access pptrs[] out of bounds. Point percpu_array_map_ops.map_meta_equal to array_map_meta_equal(), which already enforces the max_entries equality check. Add a selftest to verify that replacing a percpu array inner map with a differently-sized one is rejected. | Oct 9, 2026 |
| CVE-2026-98375(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: xen/netfront: drop RX packets with a short Ethernet header handle_incoming_queue() pulls pull_to bytes into the head before calling eth_type_trans(). pull_to is the length of the first RX slot, capped at RX_COPY_THRESHOLD, and that length comes from the backend. Nothing checks it against ETH_HLEN. If the first slot is shorter than ETH_HLEN and more slots follow, the head ends up shorter than an Ethernet header while skb->len is longer, and eth_type_trans() BUG()s in __skb_pull(). If the whole packet is shorter than ETH_HLEN, eth_type_trans() reads the header past the end of the data instead. Pull at least ETH_HLEN, and drop the packet if that fails, which also drops packets too short to hold an Ethernet header. This also checks the return value of the pull, which was ignored. | Oct 9, 2026 |
| CVE-2026-97075(opens NVD record) | Medium | 6.5 | Missing Authorization vulnerability in WP Media WP Rocket wp-rocket allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP Rocket: from n/a before 3.23.5. | Oct 9, 2026 |
| CVE-2026-4264(opens NVD record) | Unscored | — | Reflected Cross-Site Scripting (XSS) on the BeeTienda e-commerce platform, specifically in the latest demo version. The incident occurs due to a lack of proper sanitization of user input data in the 'search' parameter of the product list endpoint. When malicious payloads are transmitted via the 'search' parameter, they are displayed insecurely in the HTML response, allowing for the arbitrary execution of JavaScript code in the victim's browser. | Oct 9, 2026 |
| CVE-2026-19575(opens NVD record) | High | 7.8 | The user-mode verification handler for the device_deinit() system call, z_vrfy_device_deinit() in kernel/device.c, validated its dev argument with K_SYSCALL_OBJ_INIT(dev, K_OBJ_ANY). k_object_validate() short-circuits its type comparison when the requested type is K_OBJ_ANY, so the check reduced to "this pointer is the base address of some kernel object the calling thread has been granted" — the object's actual type was never compared, and K_SYSCALL_OBJ_INIT also skips the initialization-state check. The sibling handlers z_vrfy_device_init() and z_vrfy_device_is_ready() already used K_OBJ_DRIVER_ANY and were unaffected. A thread running in user mode can therefore pass any kernel object it holds permission on — most usefully a thread stack object obtained from the k_thread_stack_alloc() syscall or a statically defined K_THREAD_STACK it was granted in order to spawn a child user thread — whose backing memory is writable from user mode. z_impl_device_deinit() then interprets those attacker-written bytes as a struct device: it dereferences the state pointer read out of the object, calls the function pointer read out of ops.deinit, and on success writes through state again. The result is an indirect call to an arbitrary address executed in supervisor mode, plus an arbitrary kernel read and a single-byte kernel write. Exploitation gives a local unprivileged thread full kernel code execution, defeating the CONFIG_USERSPACE isolation boundary entirely; a less precise attempt yields a supervisor-mode fault and a system crash. The defect is only reachable in builds that enable both CONFIG_USERSPACE and CONFIG_DEVICE_DEINIT_SUPPORT — with de-initialization support disabled, z_impl_device_deinit() returns -ENOTSUP without ever dereferencing the pointer. In v4.2.x and v4.3.x, CONFIG_DEVICE_DEINIT_SUPPORT defaulted to y, so every CONFIG_USERSPACE build of those releases is exposed unless the option was explicitly turned off. From v4.4.0 the option is opt-in (no default, and not selected by any in-tree subsystem), so a v4.4.x build is exposed only if it enables the option explicitly. The v4.2 line is no longer maintained and receives no backport. The fix changes the object check to K_OBJ_DRIVER_ANY, which constrains the argument to the build-generated driver object type range (K_OBJ_DRIVER_FIRST..K_OBJ_DRIVER_LAST) — the real struct device instances placed by the linker — so the state and ops.deinit fields are once again kernel-controlled. | Oct 9, 2026 |
| CVE-2026-19574(opens NVD record) | High | 7.0 | The ARM64 MMU back-end allocated address space identifiers (ASIDs) for memory domains with a bare round-robin counter in arch_mem_domain_init() (arch/arm64/core/mmu.c). VM_ASID_BITS is 8, so only 255 ASIDs exist; once the counter wrapped, arch_mem_domain_init() could hand an ASID to a new domain while a still-live domain held the same one. Domain-private mappings are installed non-global (MT_NG), so the ASID is the only tag separating one domain's cached translations from another's in the TLB. The context-switch path in z_arm64_swap_ptables() only flushes the TLB when the outgoing and incoming domains carry the same ASID, which does not cover a duplicate reached through a third domain: for domains A and C sharing an ASID and an unrelated domain B, the schedule A -> B -> C never takes the flush branch, so the ASID-tagged entries A populated remain resident while C runs. Under SMP two live domains sharing an ASID can additionally be resident on two CPUs at once, which the architecture does not allow for distinct translation-table sets. Triggering the wrap requires a CONFIG_USERSPACE application on ARM64 that creates more than 255 memory domains over its lifetime; k_mem_domain_init() and k_mem_domain_deinit() are supervisor-only APIs and are not exposed as syscalls, so an unprivileged thread cannot drive the counter directly. Once two live domains alias, however, a user-mode thread in one domain can read and write memory belonging to the other domain's partitions and thread stacks with that domain's permissions, defeating the memory-domain isolation boundary. The fix scans the live domain_list before assigning an ASID, advances the round-robin counter past ASIDs already in use, and returns -ENOMEM when all are taken, so domain creation fails closed instead of silently aliasing. | Oct 9, 2026 |
| CVE-2026-19571(opens NVD record) | Medium | 6.7 | The ITE IT8xxx2 SHI host-command backend (subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c) copied the 8-byte host-command request header from the SPI Rx FIFO directly into the shared receive buffer data->in_msg and only afterwards checked the protocol version and the derived packet length. The interrupt handler also accepted a chip-select assertion and an Rx-valid-length (RVLI) interrupt in any driver state other than SHI_STATE_DISABLED, so a new header could be parsed while the host-command thread was still processing the previous request out of the very same buffer. The host processor is the SPI controller and drives both chip select and the clock. After sending a well-formed request it can immediately de-assert chip select — which returns the driver to the ready state and re-enables the FIFO — and start a second transaction carrying a header with data_len = 0xFFFF. Those eight bytes are written into in_msg before the oversized length is rejected, so they land in a buffer whose contents verify_rx() in subsys/mgmt/ec_host_cmd/ec_host_cmd_handler.c has already validated. If this lands in the window before the host-command thread executes args.input_buf_size = rx_header->data_len, the framework hands the registered command handler a 65535-byte input length over a 256-byte buffer. The result is an out-of-bounds read of up to roughly 64 KiB beyond the request buffer: command handlers that copy or echo input_buf_size bytes disclose adjacent embedded-controller memory back to the host or overflow the response buffer, and a read past the end of SRAM faults the controller. The same race also allows cmd_id and cmd_ver to be swapped after checksum verification and after handler lookup. Exploitation requires the ability to drive the inter-processor SHI bus (a compromised host OS or physical access to the SPI lines) and winning a timing race, which the SPI controller can retry indefinitely. The fix parses the header into a local struct ec_host_cmd_request_header and copies it into in_msg only after the length has been bounded by sizeof(data->in_msg), and ignores chip-select and RVLI interrupts outside SHI_STATE_READY_TO_RECV/SHI_STATE_RECEIVING. A residual, bounded race remains: an end-of-transaction interrupt still resets the state to ready while the host-command thread owns the buffer, so a valid second request can still overwrite the in-flight request's contents, unlike the NPCX backend which parks in SHI_STATE_CNL_RESP_NOT_RDY while the buffer is in use. | Oct 9, 2026 |
| CVE-2026-19570(opens NVD record) | High | 8.8 | The LE Audio Broadcast Sink in subsys/bluetooth/audio/bap_broadcast_sink.c copies subgroup metadata from a received Basic Audio Announcement (BASE) into the static Broadcast Audio Scan Service parameter structure mod_src_param without any bounds check. In base_subgroup_meta_cb() the destination element was selected as mod_src_param.subgroups[mod_src_param.num_subgroups] with no test against ARRAY_SIZE(mod_src_param.subgroups) (sized by CONFIG_BT_BAP_BASS_MAX_SUBGROUPS, default 1), and the metadata was copied with memcpy() using the raw on-air length returned by bt_bap_base_get_subgroup_codec_meta() into a metadata array sized by CONFIG_BT_AUDIO_CODEC_CFG_MAX_METADATA_SIZE (default 4). The BASE validator bt_bap_base_get_base_from_ad() only checks structural consistency and permits up to ~24 subgroups and metadata LTVs of ~240 octets. The defect is reached from the periodic advertising receive callback: pa_recv() → bt_data_parse() → pa_decode_base() → update_recv_state_base() → bt_bap_base_foreach_subgroup() → base_subgroup_meta_cb(). Every broadcast sink registers a scan-delegator receive state at creation (bt_bap_broadcast_sink_create() calls broadcast_sink_add_src()), and CONFIG_BT_BAP_BROADCAST_SINK depends on CONFIG_BT_BAP_SCAN_DELEGATOR, so the path is active in every broadcast-sink build once the device is periodic-advertising-synced. An attacker in radio range who operates a broadcast source the device syncs to — or who impersonates the advertiser address and SID of one already in use, periodic advertising data being unauthenticated — can change the BASE at will; each new BASE is re-parsed. A crafted BASE therefore writes attacker-chosen bytes past the end of a fixed static object in .bss: up to roughly 236 bytes for an oversized metadata LTV, plus whole struct bt_bap_bass_subgroup records for each subgroup beyond CONFIG_BT_BAP_BASS_MAX_SUBGROUPS. This is memory corruption of adjacent Bluetooth-audio state reachable with no pairing, bonding or GATT connection, with a potential for remote code execution in the Bluetooth RX thread; in addition, the unvalidated metadata_len is forwarded to bt_bap_scan_delegator_mod_src(), which neither clamps it nor rejects it, leading to a further copy into the receive state and to out-of-bounds memory being disclosed in the BASS receive-state notification sent to a connected Broadcast Assistant. The fix rejects a BASE carrying more subgroups than the receive state can hold (discarding the update entirely) and omits metadata that does not fit rather than copying it, and additionally honours the previously-ignored error return of the subgroup decode pass. | Oct 9, 2026 |
| CVE-2026-19569(opens NVD record) | High | 8.8 | dynamic_object_create() in kernel/userspace/userspace.c computed the backing allocation for a dynamically allocated kernel object as obj_size_get(otype) + size, and for thread stack elements as STACK_ELEMENT_DATA_SIZE(size) (a round-up plus fixed overhead), without checking either expression for unsigned wrap-around. A size close to SIZE_MAX makes the computed total wrap to a very small value, so the heap chunk handed out is a few bytes while the object descriptor is still tagged with the full requested type and registered in the kernel object table. The size argument reaches that arithmetic directly from user mode. k_object_alloc_size() is declared __syscall in include/zephyr/sys/kobject.h, its verifier z_vrfy_k_object_alloc_size() in kernel/userspace/userspace_handler.c is a bare pass-through, and z_object_alloc() only range-checks otype — nothing bounds size. The stack-element branch is additionally reachable through the k_thread_stack_alloc() syscall via kernel/dynamic.c. Because subsequent kernel-object validation checks only the object's type and initialization state, the undersized handle passes K_SYSCALL_OBJ_INIT()/K_SYSCALL_OBJ_NEVER_INIT(), and the matching init syscall (for example k_mutex_init(), k_sem_init(), or k_thread_create()) then writes a complete object over the truncated allocation. An unprivileged user-mode thread can therefore trigger a supervisor-mode out-of-bounds write into the kernel resource-pool heap, of a size and content it substantially controls, corrupting sys_heap chunk metadata and adjacent kernel objects. Under CONFIG_GEN_PRIV_STACKS the thread-stack branch additionally stores an attacker-influenced wild pointer as a user thread's privileged stack base. The practical result is escape from the CONFIG_USERSPACE sandbox — kernel-level code execution or at minimum kernel memory corruption and system compromise. Exploitation requires CONFIG_USERSPACE together with CONFIG_DYNAMIC_OBJECTS (also selected by CONFIG_DYNAMIC_THREAD under userspace), and a calling thread with an assigned resource pool. The fix rejects both overflowing computations and frees the partially built descriptor. | Oct 9, 2026 |
| CVE-2026-106155(opens NVD record) | High | 8.9 | In Progress® Telerik® Report Server prior to version 12.2.26.1007, a stored cross-site scripting vulnerability in the shared reporting engine allows an authenticated report author to embed javascript: or vbscript: URLs in report navigation actions or HTML text box links. When another user views the malicious report and the embedded navigation is triggered, attacker-controlled script can execute in the web report viewer's origin. In a multi-user Report Server deployment, this can enable privilege escalation by performing actions in a higher-privilege user's authenticated session, including an administrator's session. | Oct 9, 2026 |
| CVE-2026-106145(opens NVD record) | High | 7.1 | In Progress® Telerik® Report Server prior to version 12.2.26.1007, incorrect privilege assignment in the service-agent SignalR hub allows an authenticated user, including a low-privilege or guest account with a valid bearer token, to register as a trusted service agent. On the next server settings-synchronization event, the rogue agent receives storage settings and encryption private keys. This privilege escalation enables disclosure of protected secrets, including stored data-source credentials and connection strings, and allows agent impersonation and interference with task dispatch. | Oct 9, 2026 |
| CVE-2025-14123(opens NVD record) | Medium | 6.8 | The Redux Framework plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 4.5.11. This is due to the plugin saving arbitrary meta keys under a registered option name without sufficient capability checks or key allowlist / restrictions. This makes it possible for authenticated attackers, with Subscriber-level access and above, to set an arbitrary role (e.g., Administrator) when performing a profile update if a plugin or theme using this framework has added at least one user profile field that leverages Redux_Users::set_profile/set_section/set_field. | Oct 9, 2026 |
| CVE-2026-97076(opens NVD record) | High | 7.5 | Executable Regular Expression Error vulnerability in WP Media WP Rocket wp-rocket allows Code Injection.This issue affects WP Rocket: from n/a before 3.23.5. | Oct 9, 2026 |
| CVE-2026-93548(opens NVD record) | High | 8.8 | The FooSales WordPress plugin before 1.43.3 does not verify that an authenticated caller is entitled to act as the user a request names, allowing any authenticated user to have the FooSales WordPress plugin before 1.43.3 act as an arbitrary other user, including an administrator, resulting in that user's account details being exposed and their account being taken over. | Oct 9, 2026 |
| CVE-2026-92990(opens NVD record) | Medium | 5.3 | The SendPress Newsletters WordPress plugin through 1.26.1.20 protects a logging endpoint with a hardcoded token that is the same on every site rather than a per-site secret, allowing unauthenticated users to read newsletter sending logs, including recipient email addresses. | Oct 9, 2026 |
| CVE-2026-92989(opens NVD record) | Medium | 4.3 | The SendPress Newsletters WordPress plugin through 1.26.1.20 does not check the user's capability on several newsletter-management actions, allowing any authenticated subscriber-level user to synchronise all site users into a mailing list and to drive the newsletter send queue. | Oct 9, 2026 |
| CVE-2026-88931(opens NVD record) | Medium | 5.3 | The Social Web Suite WordPress plugin through 4.1.12 does not restrict which of its settings may be written through an unauthenticated endpoint, allowing attackers to overwrite arbitrary Social Web Suite WordPress plugin through 4.1.12 options, including the shared secret that guards its own privileged endpoints. | Oct 9, 2026 |
| CVE-2026-87841(opens NVD record) | Medium | 5.3 | The UnitechPay WordPress plugin through 1.0.6.3 does not verify the authenticity of the payment notifications it receives, allowing unauthenticated attackers to mark orders placed through it as paid without any payment being made, as well as to force other orders into a failed state. | Oct 9, 2026 |
| CVE-2026-86850(opens NVD record) | Medium | 6.5 | The SKU Error Fixer for WooCommerce WordPress plugin through 1.0 does not perform any capability or nonce checks on two of its AJAX actions, which are also available to unauthenticated users, allowing them to permanently delete product variations it classifies as obsolete, and to disclose those variations' details, with no recoverable copy left behind. | Oct 9, 2026 |
| CVE-2026-81929(opens NVD record) | High | 7.2 | The Ocean Pro Demos and Ocean eComm Treasure Box plugins for WordPress is vulnerable to Stored Cross-Site Scripting via the 'content' parameter in all versions up to, and including, 1.5.4, and 1.8.0, respectively, due to insufficient authorization, input sanitization, and output escaping in the Popup Builder's save_popup_content AJAX action. This makes it possible for unauthenticated attackers to inject arbitrary web scripts into a published Gutenberg popup that will execute whenever a user accesses a page on which the popup is configured to display. A valid premium license, the Popup Builder module, and at least one published Gutenberg popup configured for display are required. | Oct 9, 2026 |
| CVE-2026-106097(opens NVD record) | Medium | 6.8 | The Code Snippets WordPress plugin before 3.10.0 does not sanitise and escape a user-supplied parameter before using it in a SQL query in some of its snippet-migration import endpoints, which are accessible to any user holding site-administration capabilities; on a WordPress Multisite network those belong to subsite Administrators, allowing a subsite Administrator who is not a network Super Admin to perform UNION-based SQL injection against shared network tables and disclose network-wide data such as other users' password hashes. | Oct 9, 2026 |
| CVE-2026-106095(opens NVD record) | Low | 3.3 | The Code Snippets WordPress plugin before 3.10.0 does not perform a capability check on one of its snippet-management actions and derives the network scope of the targeted snippet from the request instead of from the stored record, allowing an administrator of a single subsite on a multisite network to activate, deactivate and reprioritise network-scoped snippets that run across every site in the network. | Oct 9, 2026 |
| CVE-2026-101028(opens NVD record) | Unscored | — | Incorrect Authorization vulnerability in ash-project ash allows an actor to infer data in related records they cannot read via Ash.count/2, Ash.exists/2 and Ash.aggregate/3. Ash.Actions.Aggregate.run/4 (lib/ash/actions/aggregate.ex) applied only the root resource's read policy before running the aggregate query. The read path also applies each related resource's read policy to filter and sort references that cross a relationship, directly (for example comments.body) or through an aggregate over one, but the aggregate path skipped that step. A caller whose filter or sort reaches these functions, for example through Ash.Query.filter_input/2, an ash_lua script, or an AshAi tool offering count or exists results, can test conditions against related rows hidden from them and recover their existence and attribute values one query at a time. Ash.read/2 and its page counts are not affected. This issue affects ash: from 2.6.0 before 3.34.6. | Oct 9, 2026 |
| CVE-2025-15700(opens NVD record) | High | 8.8 | The AWP Classifieds WordPress plugin before 4.4.9 does not validate the type of files extracted from an uploaded ZIP archive during its listing-import feature, allowing users with the AWP Classifieds WordPress plugin before 4.4.9's management capability to upload arbitrary PHP files to a publicly accessible, network-shared directory and achieve remote code execution. | Oct 9, 2026 |
| CVE-2026-87110(opens NVD record) | Medium | 5.3 | An unauthenticated user with network access to the Ops Manager web port can repeatedly request monitoring endpoints that perform costly work without rate limiting. This can temporarily slow other traffic served by the same process while requests continue. | Oct 9, 2026 |
| CVE-2026-87109(opens NVD record) | Medium | 5.3 | An authenticated Ops Manager organization member can retrieve another member's pending authenticator enrollment seed through user-listing endpoints while that member's enrollment is unconfirmed. This results in disclosure of secret authentication material to another member of the same organization or project. | Oct 9, 2026 |
| CVE-2026-87108(opens NVD record) | Low | 3.1 | An authenticated Ops Manager user with a read-only project role can retrieve a daily host monitoring record associated with a different project when they possess the required record identifier. Insufficient ownership validation can expose deployment metadata, including host and configuration details. | Oct 9, 2026 |
| CVE-2026-107914(opens NVD record) | High | 7.8 | Backdrop CMS 1.34 before 1.34.5 and 1.35 before 1.35.1 doesn't sufficiently protect configuration exports when delivering a compressed archive. This vulnerability is mitigated by the fact that an export must have been previously requested by someone with the "Synchronize, import, and export configuration" permission. NOTE: CVE-2026-107914 refers to the vulnerability in which config.admin.inc does not ensure that a file_unmanaged_delete operation occurs. Therefore, many archives could persist: config.tar.gz, config_0.tar.gz, config_1.tar.gz, etc. There is a separate config.module issue that could allow remote access by an anonymous user, but only for the one filename config.tar.gz. | Oct 9, 2026 |
| CVE-2026-107911(opens NVD record) | High | 7.5 | A type confusion vulnerability in the _read_flags function (src/commands/cmd_dispatcher.c) in FalkorDB before 4.20.0 allows a remote authenticated attacker who can run GRAPH.QUERY to cause a denial of service and possibly disclose or corrupt memory. The function accepts a --bolt argument from any client and casts the following command argument, a Redis string object, to a Bolt client structure without checking its origin; the result-set code then dereferences pointers read from that object. The argument is parsed even when the Bolt endpoint is disabled, so default configurations are affected. | Oct 9, 2026 |
| CVE-2026-107910(opens NVD record) | High | 8.1 | An improper authentication vulnerability in the is_authenticated function (src/bolt/bolt_api.c) in FalkorDB before 4.20.0 allows a remote unauthenticated attacker to execute graph queries without credentials through the Bolt endpoint. The function decides whether a password is required by issuing an empty AUTH command to Redis and treats only a WRONGPASS error as meaning that a password is required; any other error, such as LOADING while a dataset is being loaded, MASTERDOWN during replication failover, or OOM under memory pressure, causes the client to be treated as authenticated. Only deployments that enable the Bolt endpoint (BOLT_PORT, disabled by default) are affected. | Oct 9, 2026 |
| CVE-2026-107909(opens NVD record) | Critical | 9.1 | A heap-based out-of-bounds write in the ws_read_frame function (src/bolt/ws.c) and the buffer_apply_mask function (src/bolt/buffer.c) in FalkorDB before 4.20.0 allows a remote unauthenticated attacker to cause a denial of service and possibly corrupt heap memory by sending a WebSocket frame with a 64-bit extended payload length to the Bolt port. The payload length is not bounded, and the only bounds check in buffer_apply_mask is an ASSERT(), which is compiled out in release builds, so the function XORs memory beyond the end of the receive buffer with the attacker-supplied mask key. Only deployments that enable the Bolt endpoint (BOLT_PORT, disabled by default) are affected. | Oct 9, 2026 |
| CVE-2026-107908(opens NVD record) | Critical | 9.8 | A heap-based out-of-bounds write in the BoltReadHandler function (src/bolt/bolt_api.c) in FalkorDB before 4.20.0 allows a remote unauthenticated attacker to cause a denial of service and possibly execute arbitrary code by sending a Bolt RESET message with an attacker-chosen chunk size to the Bolt port. The handler checks the size only with ASSERT(), which is compiled out in release builds, then computes a destination pointer from the wire-supplied 16-bit size and moves buffered data up to about 64 KiB backwards past the start of the read buffer. Only deployments that enable the Bolt endpoint (BOLT_PORT, disabled by default) are affected. | Oct 9, 2026 |
| CVE-2026-7827(opens NVD record) | High | 8.1 | A stack-based buffer overflow in the _RdbLoadEntity function of the RDB graph decoders (src/serializers/decoders/*/decode_graph_entities.c) in FalkorDB before 4.18.4 allows a remote attacker who can issue Redis replication commands (for example, against an instance with no password configured) to cause a denial of service and possibly execute arbitrary code by supplying a crafted RDB stream with an attacker-controlled entity property count. The count sizes two variable-length arrays on the thread stack with no upper bound, and the decoder then fills them with attacker-supplied values. | Oct 9, 2026 |
| CVE-2026-7826(opens NVD record) | Critical | 9.1 | A heap-based out-of-bounds read in the BufferSerializerIOv2_ReadBuffer function (src/serializers/serializer_io.c) in FalkorDB before 4.18.4 allows a remote attacker who can issue Redis replication commands (for example, against an instance with no password configured) to cause a denial of service or disclose heap memory by supplying a crafted RDB stream whose sub-buffer length field exceeds the remaining buffer size. The only bounds check is an ASSERT(), which is compiled out in release builds, so memcpy() reads past the end of the heap allocation. | Oct 9, 2026 |
| CVE-2026-5759(opens NVD record) | Critical | 9.8 | A double free and use-after-free vulnerability in the RdbLoadDeletedNodes function of the RDB graph decoders (src/serializers/decoders/*/decode_graph_entities.c) in FalkorDB before 4.18.1 allows a remote attacker who can issue Redis replication commands (for example, against an instance with no password configured) to cause a denial of service or execute arbitrary code in the redis-server process by supplying a crafted RDB stream whose deleted-nodes buffer length is not a multiple of sizeof(NodeID). The length check relies on ASSERT(), which is compiled out in release builds, so the function continues after freeing the buffer, reading it and freeing it a second time. | Oct 9, 2026 |
| CVE-2026-107890(opens NVD record) | Low | 3.3 | OpenPrinting CUPS before 2.4.20 contains a NULL pointer dereference caused by repeated IPP group tags in job-creation requests. IPP parsing creates unnamed separator attributes with IPP_TAG_ZERO, but add_job() converts these separators to IPP_TAG_JOB. During job startup, get_options()/ipp_length() subsequently calls strlen() on a NULL attribute name, terminating cupsd and disrupting all queues. A single crafted Print-Job request can trigger the crash when the client can reach the scheduler and submit jobs to an accepting, enabled queue supporting the submitted document format. Anonymous submission is possible when permitted by listener and access-control configuration. | Oct 9, 2026 |
| CVE-2026-107889(opens NVD record) | Medium | 5.5 | A flaw was found in the login theme rendering component of Keycloak. The issue occurs because the security filter responsible for cleaning user input can be bypassed, allowing a realm administrator to store malicious scripts in display fields. This could result in unauthorized JavaScript execution in the browsers of users visiting the login page, potentially leading to data exposure or session interference. | Oct 9, 2026 |
| CVE-2026-107888(opens NVD record) | Medium | 5.1 | OpenPrinting CUPS before 2.4.20 contains a NULL pointer dereference in cupsdCheckJobs() when a job marked job-held-on-create refers to a temporary printer that has been automatically deleted. Temporary-printer cleanup can remove the destination without canceling its held jobs, and the scheduler dereferences the NULL result of cupsdFindDest() while checking holding_new_jobs. This terminates cupsd and interrupts all queues managed by that process. In some plausible scenarios, an unprivileged submission can trigger this. | Oct 9, 2026 |
| CVE-2026-107886(opens NVD record) | Low | 2.3 | OpenPrinting CUPS before 2.4.20 contains a double-free in printer-class management. When CUPS-Add-Modify-Class replaces an existing class member list, add_class() frees pclass->printers without clearing the pointer. If subsequent validation fails, the class retains the dangling pointer; CUPS-Delete-Class subsequently frees the same allocation in cupsdDeletePrinter(). A client authorized to modify and delete classes can cause scheduler-wide denial of service. The default policy requires @SYSTEM privileges. | Oct 9, 2026 |
| CVE-2026-107885(opens NVD record) | Low | 3.3 | OpenPrinting CUPS through 2.4.20 contains a resource-exhaustion vulnerability in the submission-timeout handling of cupsdCheckJobs(). The scheduler suppresses timeout processing for all pending jobs whenever any client connection has an in-flight Send-Document operation, without matching that connection to the job being examined. A client allowed to reach the IPP service can hold an incomplete HTTP request containing parsed Send-Document headers before operation authorization, preventing unrelated incomplete jobs from expiring. Where Create-Job submission is allowed, incomplete jobs can accumulate until MaxJobs is exhausted and further legitimate print submissions are rejected. The suppression ends when the held connection closes. | Oct 9, 2026 |
| CVE-2026-97032(opens NVD record) | High | 7.5 | HTTP/2 servers could end up crashing due to inadvertently modifying its HPACK encoder concurrently. This happens because the server modifies the HPACK encoder from two goroutines without synchronization: one uses the encoder to encode a HEADERS frame as part of a response sent to a client and the other modifies the encoder's table size when handling a SETTINGS frame containing SETTINGS_HEADER_TABLE_SIZE that a client sends. A malicious client can repeatedly send a request while changing the header table size to crash the server. | Oct 8, 2026 |
| CVE-2026-97031(opens NVD record) | High | 7.5 | Multiple ECH outer extension references are not permitted under RFC 9849; previously, a client could send a well-crafted packet that could trigger memory exhaustion in the server process by specifying multiple references. We now reject these as malformed and curb the memory amplification vector as a result. | Oct 8, 2026 |
| CVE-2026-97030(opens NVD record) | Medium | 6.1 | A trusted template author may have previously written a valid template wherein the use of the 'yield' keyword would not be correctly escaped. We now ensure that valid keyword uses are escaped and non-keyword uses are not escaped. | Oct 8, 2026 |
| CVE-2026-96207(opens NVD record) | Critical | 10.0 | Improper certificate validation in Microsoft Partner Center allows an unauthorized attacker to elevate privileges over a network. | Oct 8, 2026 |