Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
36,740 matching · page 138/735Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-72323(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: Fix potential UAF in igmp_gq_start_timer() A race condition exists between device teardown (inetdev_destroy) and incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free in the IGMP timer callback. During device destruction, inetdev_destroy() drops the primary reference to in_device, which can drop its refcount to 0. The actual freeing of in_device memory is deferred via RCU (using call_rcu()). Concurrently, igmp_rcv() runs under RCU read lock and obtains the in_device pointer. Because the memory is RCU-protected, CPU-0 can safely dereference in_device even if its refcount has hit 0. However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it attempts to acquire a reference using in_dev_hold(). This increments the refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning. Since the in_device memory is still scheduled to be freed after the RCU grace period (as the free callback does not check the refcount again), the device is freed while the timer is still armed. When the timer expires, it accesses the freed memory, causing a kernel panic. Fix this by using refcount_inc_not_zero() (via a new helper in_dev_hold_safe()) to prevent acquiring a reference if the device is already being destroyed. If the refcount is 0, we do not arm the timer. A similar issue in IPv6 MLD is fixed in a subsequent patch. | Aug 15, 2026 |
| CVE-2026-72322(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: Fix potential UAF in MLD delayed work A race condition exists between device teardown and incoming MLD query processing, leading to a Use-After-Free in the MLD delayed work. During device destruction, the primary reference to inet6_dev is dropped, which can drop its refcount to 0. The actual freeing of inet6_dev memory is deferred via RCU. Concurrently, the packet receive path runs under RCU read lock and obtains the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can safely dereference inet6_dev even if its refcount has hit 0. However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it attempts to acquire a reference using in6_dev_hold(). This increments the refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning. Since the inet6_dev memory is still scheduled to be freed after the RCU grace period, the device is freed while the work is still scheduled. When the work runs, it accesses the freed memory, causing a kernel panic. Fix this by using refcount_inc_not_zero() (via a new helper in6_dev_hold_safe()) to prevent acquiring a reference if the device is already being destroyed. If the refcount is 0, we do not schedule the work. | Aug 15, 2026 |
| CVE-2026-72321(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: Fix potential memory leaks in igmp_mod_timer() and igmp_stop_timer() When a timer is deleted and not re-armed in igmp_mod_timer(), or stopped in igmp_stop_timer(), the code currently decrements the reference counter of the multicast list entry @im using refcount_dec(&im->refcnt). However, both functions can be called from the RCU reader path: - igmp_mod_timer() via igmp_heard_query() -> for_each_pmc_rcu() - igmp_stop_timer() via igmp_rcv() -> igmp_heard_report() If the group im was concurrently removed from the list by ip_mc_dec_group(), its reference count might have already been decremented to 1. In this case, timer_delete() succeeds, and refcount_dec() decrements the refcount from 1 to 0. Since refcount_dec() does not free the object when it hits 0 (unlike ip_ma_put()), the im structure is leaked. Fix this by using ip_ma_put(im) instead of refcount_dec(&im->refcnt), and deferring the put until after the spinlock is released. | Aug 15, 2026 |
| CVE-2026-72320(opens NVD record) | Critical | 9.1 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_lookup: fix catchall element handling with inverted lookups nft_lookup_eval() decides whether a lookup matched (`found`) from the direct set lookup and priv->invert before falling back to the catchall element used by interval sets (e.g. nft_set_rbtree) for the open-ended default range. Since `found` is never recomputed after `ext` is replaced by the catchall lookup, inverted lookups (NFT_LOOKUP_F_INV, "!= @set") can wrongly match or wrongly skip the catchall element, producing the wrong verdict. Fold the catchall lookup into `ext` before computing `found`, matching the order already used by nft_objref_map_eval(). | Aug 15, 2026 |
| CVE-2026-72319(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: ipvs: ensure inner headers in ICMP errors are in headroom Sashiko points out that after stripping the outer headers with pskb_pull() we should ensure the inner IP headers in ICMP errors from tunnels are present in the skb headroom for functions like ipv4_update_pmtu(), icmp_send() and IP_VS_DBG(). Also, add more checks for the length of the inner headers. | Aug 15, 2026 |
| CVE-2026-72318(opens NVD record) | Critical | 9.4 | In the Linux kernel, the following vulnerability has been resolved: cifs: validate DFS referral string offsets parse_dfs_referrals() validates that the response header and referral array fit in the received buffer, but each referral also contains string offsets supplied by the server. Those offsets are used to compute the DfsPath and NetworkAddress string pointers without checking whether they still point inside the response buffer. A malformed referral can therefore make the computed pointer exceed the end of the buffer. The resulting negative max_len is then passed to cifs_strndup_from_utf16(), and the non-Unicode path forwards it to kstrndup() as a size_t, allowing strnlen() to read out of bounds. Validate each string offset before deriving the string pointer. | Aug 15, 2026 |
| CVE-2026-72317(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: pin upper rpc_clnt across the TLS connect_worker The TLS connect path has a use-after-free: nothing pins the upper rpc_clnt across the delayed connect_worker. xs_connect() stores task->tk_client in sock_xprt::clnt as a raw pointer and queues the worker; for TLS-secured transports that worker is xs_tcp_tls_setup_socket(), which reads several fields out of the saved pointer (cl_timeout, cl_program, cl_prog, cl_vers, cl_cred, cl_stats) to construct the args for the inner handshake rpc_clnt. The xprt does not reference the rpc_clnt; the rpc_clnt references the xprt. xs_destroy() does cancel the connect_worker, but it runs only when the xprt's refcount drops to zero, which cannot happen until the rpc_clnt releases its cl_xprt reference in rpc_free_client_work(). When a TLS handshake fails fatally (for example, an mTLS mount whose client cert does not match the server), the connecting task is woken with -EACCES and exits, the mount caller invokes rpc_shutdown_client(), and the upper rpc_clnt is freed before the queued connect_worker fires. xs_tcp_tls_setup_socket() then dereferences the freed clnt, producing the refcount_t underflow Michael Nemanov reported. Take a reference on the upper rpc_clnt in xs_connect() for TLS transports via a new rpc_hold_client() helper, and drop it in the connect_worker's exit path with rpc_release_client(). The xprt_lock_connect() / xprt_unlock_connect() pairing already serialises xs_connect() with xs_tcp_tls_setup_socket(), so the take and release are balanced one-for-one. The non-TLS connect worker (xs_tcp_setup_socket) never reads sock_xprt::clnt, so leave that path alone and avoid the clnt-holds-xprt-holds-clnt cycle that would otherwise prevent xprt destruction. | Aug 15, 2026 |
| CVE-2026-72316(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: dm era: fix NULL pointer dereference in metadata_open() metadata_open() returns NULL when kzalloc_obj() fails, but the caller era_ctr() only checks IS_ERR(md). Since IS_ERR(NULL) returns false, the NULL pointer is treated as a valid result and later assigned to era->md, leading to a NULL pointer dereference when the metadata is accessed. Fix this by returning ERR_PTR(-ENOMEM) on allocation failure, consistent with dm-cache-metadata.c, dm-thin-metadata.c, and dm-clone-metadata.c which all use ERR_PTR(-ENOMEM) for the same pattern. | Aug 15, 2026 |
| CVE-2026-72315(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix busy dentry warning on unmount after DIO Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed the issue in cifs where deferred close of a file led to a dentry reference count not being released in umount, by flushing deferredclose_wq in cifs_kill_sb() to solve it. However, the cifs DIO path suffers from the same busy-dentry problem caused by a delayed dentry reference-count release: [dio] [cifsd] [close + umount] netfs_unbuffered_write_iter_locked ... cifs_demultiplex_thread netfs_unbuffered_write cifs_issue_write netfs_wait_for_in_progress_stream [1] ... netfs_write_subrequest_terminated netfs_subreq_clear_in_progress netfs_wake_collector // wake [1] netfs_put_subrequest netfs_put_request queue_work(system_dfl_wq, xxx) [2] // dio write return cifs_close _cifsFileInfo_put // cfile->count 2->1 --cfile->count [3] // umount cifs_kill_sb kill_anon_super // warning triggered! shrink_dcache_for_umount [4] [system_dfl_wq] [5] netfs_free_request ... _cifsFileInfo_put // cfile->count 1->0 --cfile->count queue_work(fileinfo_put_wq, xxx) [fileinfo_put_wq] [6] cifsFileInfo_put_work cifsFileInfo_put_final dput If the umount path is triggered before [5], it results warning: BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1) [unmount of cifs cifs] The existing per-inode ictx->io_count wait in cifs_evict_inode() does not help: it lives in the inode eviction path, which runs after shrink_dcache_for_umount() has already warned about the busy dentries. Fix it by adding a per-superblock outstanding-rreq counter that is incremented in cifs_init_request() and decremented in cifs_free_request(). In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach 0 - which guarantees that all cleanup_work for this sb have run and thus all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq. Then drain the workqueue so the dentry refs are dropped. This is a targeted wait, not a flush of the system-wide system_dfl_wq. | Aug 15, 2026 |
| CVE-2026-72314(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK Compare against -EDEADLK, which is what ww_mutex_lock() actually returns and what every other deadlock check in this file already uses. Function regulator_lock_two() acquires two regulators via regulator_lock_nested() -> ww_mutex_lock(). On contention, ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop the lock it holds and retry the acquisition in the canonical order. However, regulator_lock_two() tests the return value against -EDEADLOCK rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are the same value, so the comparison happens to be correct and the bug is invisible. But on MIPS, SPARC, and PowerPC, those two errors have different values. The test is wrong: a genuine -EDEADLK backoff no longer matches -EDEADLOCK, so instead of unlocking and retrying, the code falls into WARN_ON(ret) and returns with only one of the two regulators locked. In practice, this is a bug only on MIPS, because the regulator core is not built or used on the other two platforms. In general, EDEADLK is preferred over EDEADLOCK for new code. | Aug 15, 2026 |
| CVE-2026-72313(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: Only consider active CRTCs for vblank sync Only synchronize fbdev output to the vblank of an active CRTC. Go over the list of CRTCs and pick the first that matches. Fixes warnings as the one shown below [ 77.201354] WARNING: drivers/gpu/drm/drm_vblank.c:1320 at drm_crtc_wait_one_vblank+0x194/0x1cc [drm], CPU#1: kworker/1:7/1867 [ 77.201354] omapdrm omapdrm.0: [drm] vblank wait timed out on crtc 0 This currently happens if the fbdev output is not on CRTC 0. Atomic and non-atomic drivers require distinct code paths. As for other fbdev operations, implement both and select the correct one at runtime. Not finding an active CRTC is not a bug. Do not wait in this case, but flush the display update as before. v4: - avoid possible deadlocks with locking context (Sashiko) v3: - drop excessive state validation (Jani) - acquire plane and CRTC mutices (Sashiko) v2: - move look-up code into separate helper - support drivers with legacy modesetting v1: - see https://lore.kernel.org/dri-devel/1c9e0e24-9c4a-4259-8700-cf9e5fd60ca3@suse.de/ | Aug 15, 2026 |
| CVE-2026-72312(opens NVD record) | High | 7.9 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix VF bringup affecting PF promiscuous state Mbox handling of nix_set_rx_mode for a VF with promiscuous and all_multi flags set to false causes deletion of the PF's promiscuous and allmulti MCAM rules. This occurs because the APIs that enable/disable these rules operate only on the PF, even when the mbox request is made via a VF interface. Guard both rvu_npc_enable_allmulti_entry() and rvu_npc_enable_promisc_entry() disable paths with an is_vf() check so that a VF bringing up or tearing down its interface cannot inadvertently clear the PF's MCAM rules. | Aug 15, 2026 |
| CVE-2026-72311(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/xe: free madvise VMA array on L2 flush failure xe_vm_madvise_ioctl() allocates madvise_range.vmas in get_vmas(). After get_vmas() succeeds with at least one VMA, error paths must go through free_vmas so the array is released before the madvise details are destroyed. The L2 flush validation path added for PAT madvise rejects some SVM/userptr ranges after get_vmas() has succeeded, but jumps directly to madv_fini. This skips kfree(madvise_range.vmas), leaking the VMA array on each failed ioctl. Jump to free_vmas instead, matching the other validation failure paths after get_vmas() has succeeded. (cherry picked from commit c3a1c3579b1250060da73507a4acef712974c78a) | Aug 15, 2026 |
| CVE-2026-72310(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix overflow in passthrough ioctl bounds check smb2_ioctl_query_info() validates the PASSTHRU_FSCTL response payload before copying it to userspace. The payload offset and length both come from 32-bit fields. The bounds check currently adds OutputOffset and qi.input_buffer_length directly, so the addition can wrap in 32-bit arithmetic before the result is compared against the response buffer length. A malicious server can use a large OutputOffset and a small OutputCount to make the wrapped sum pass the bounds check. The later copy_to_user() then reads from io_rsp + OutputOffset, outside the response buffer. Use size_add() for the offset plus length check so overflow is treated as out of bounds. | Aug 15, 2026 |
| CVE-2026-72309(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: tracing/remotes: Fix leak in trace_remote_alloc_buffer() error path If page allocation fails in trace_remote_alloc_buffer(), desc->nr_cpus is not yet incremented for the current CPU. As a consequence, on error, half-allocated rb_desc will not be freed in trace_remote_free_buffer(). Increment desc->nr_cpus as soon as the first allocation for the current CPU has succeeded. | Aug 15, 2026 |
| CVE-2026-72308(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: mlxsw: fix refcount leak in mlxsw_sp_port_lag_join() When mlxsw_sp_port_lag_index_get() fails, mlxsw_sp_port_lag_join() returns an error without releasing the lag reference obtained by the earlier mlxsw_sp_lag_get(). All other error paths in the function jump to the cleanup label that ends with mlxsw_sp_lag_put(), so this is a single missed release. Fix the leak by replacing the bare 'return err' with a goto to the existing error cleanup label, which will drop the reference safely. | Aug 15, 2026 |
| CVE-2026-72307(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: mlxsw: fix refcount leak in mlxsw_sp_vrs_lpm_tree_replace() When mlxsw_sp_vrs_lpm_tree_replace() fails after replacing some VRs, the error rollback loop does not correctly revert the preceding replacements. The loop decrements the index but fails to update the vr pointer, which still points to the VR that caused the failure. As a result, the condition and the rollback call always operate on the same VR, potentially calling mlxsw_sp_vr_lpm_tree_replace() multiple times on it while never rolling back the earlier VRs. Those VRs continue to hold a reference to new_tree acquired via mlxsw_sp_lpm_tree_hold(), leaking the reference count of new_tree. Fix by reinitializing vr inside the error loop with the updated index: vr = &mlxsw_sp->router->vrs[i]; so that the loop correctly iterates over all VRs that were actually replaced. | Aug 15, 2026 |
| CVE-2026-72306(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: vduse: Fix race in vduse_dev_msg_sync and vduse_dev_read_iter There is one race case in vduse_dev_msg_sync and vduse_dev_read_iter: vduse_dev_read_iter(): lock(msg_lock); dequeue_msg(send_list); unlock(msg_lock); vduse_dev_msg_sync(): wait_timeout() finish lock(msg_lock); check msg->complete is false list_del(msg); <- double list_del() crash! To fix this case, we shall ensure vduse_msg is on send_list or recv_list outside the msg_lock critical section. | Aug 15, 2026 |
| CVE-2026-72305(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: VDUSE: avoid leaking information to userspace The bounceing is not necessarily page aligned, so current VDUSE can leak kernel information through mapping bounce pages to userspace. Allocate bounce pages with __GFP_ZERO to avoid leaking information to userspace. | Aug 15, 2026 |
| CVE-2026-72304(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-control: Fix TOCTOU in sof_ipc4_bytes_put In sof_ipc4_bytes_put(), the copy size is derived from the old data->size in the buffer rather than the incoming new data's size field from ucontrol. If the new data has a different size, the copy uses the wrong length: it may truncate valid data or copy stale bytes. Fix by validating and using the incoming data's sof_abi_hdr.size from ucontrol before copying. | Aug 15, 2026 |
| CVE-2026-72303(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-control: Validate notification payload size Validate MODULE_NOTIFICATION payload length before reading bytes/channel data in control update handling. | Aug 15, 2026 |
| CVE-2026-72302(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Use overflow checks in control_update size calc In sof_ipc3_control_update(), the expected_size calculation uses firmware-provided cdata->num_elems in arithmetic that could overflow on 32-bit platforms, wrapping to a small value. This would allow the cdata->rhdr.hdr.size comparison to pass with mismatched sizes, potentially leading to out-of-bounds access in snd_sof_update_control. Use check_mul_overflow() and check_add_overflow() to detect and reject overflowed size calculations. | Aug 15, 2026 |
| CVE-2026-72301(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Fix TOCTOU in bytes_put and bytes_get In sof_ipc3_bytes_put(), the size used for the memcpy is derived from the old data->size already in the buffer, not the incoming new data's size field. If the new data has a different size, the copy length is wrong: it may truncate valid data or copy stale bytes. Similarly, sof_ipc3_bytes_get() checks data->size against max_size without accounting for the sizeof(struct sof_ipc_ctrl_data) offset of the flex array within the allocation. Fix bytes_put to validate and use the incoming data's sof_abi_hdr.size from ucontrol before copying. Fix bytes_get to subtract sizeof(*cdata) from the bounds check to match the actual available space. | Aug 15, 2026 |
| CVE-2026-72300(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: topology: validate vendor array size before parsing sof_parse_token_sets() reads array->size while iterating over topology private data. The loop condition only checks that some data remains, so a malformed topology with a truncated trailing vendor array can make the parser read the size field before a full vendor-array header is available. Validate that the remaining private data contains a complete snd_soc_tplg_vendor_array header before reading array->size. The declared array size check also needs to remain signed. asize is an int, but sizeof(*array) has type size_t, so comparing them directly promotes negative asize values to unsigned and lets them pass the check, as reported in the stable review thread reference below. Cast sizeof(*array) to int when validating the declared array size. This rejects negative, zero and otherwise too-small sizes before the parser dispatches to the tuple-specific code. | Aug 15, 2026 |
| CVE-2026-72299(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: tipc: restrict socket queue dumps in enqueue tracepoints tipc_sk_enqueue() runs with sk->sk_lock.slock held while the socket is owned by user context. The spinlock protects the backlog queue in this path, but it does not serialize against the socket owner consuming or purging sk_receive_queue. KASAN reported: CPU: 14 UID: 0 PID: 1050 Comm: tipc3 Not tainted 7.1.0-rc6+ #126 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 lib/dump_stack.c:123 print_report+0xce/0x5b0 mm/kasan/report.c:482 kasan_report+0xc6/0x100 mm/kasan/report.c:597 __asan_report_load4_noabort+0x14/0x30 mm/kasan/report_generic.c:380 tipc_skb_dump+0x1327/0x16f0 net/tipc/trace.c:73 tipc_list_dump+0x208/0x2e0 net/tipc/trace.c:187 tipc_sk_dump+0xaf6/0xd60 net/tipc/socket.c:3996 trace_event_raw_event_tipc_sk_class+0x312/0x5a0 net/tipc/trace.h:188 tipc_sk_rcv+0xb1d/0x1d50 net/tipc/socket.c:2497 tipc_node_xmit+0x1c3/0x1440 net/tipc/node.c:1689 __tipc_sendmsg+0x97a/0x1440 net/tipc/socket.c:1512 tipc_sendmsg+0x52/0x80 net/tipc/socket.c:1400 sock_sendmsg+0x2f6/0x3e0 net/socket.c:825 splice_to_socket+0x7f9/0x1010 fs/splice.c:884 do_splice+0xe21/0x2330 fs/splice.c:936 __do_splice+0x153/0x260 fs/splice.c:1431 __x64_sys_splice+0x150/0x230 fs/splice.c:1616 x64_sys_call+0xeb5/0x2790 arch/x86/entry/syscall_64.c:41 do_syscall_64+0xf3/0x620 arch/x86/entry/syscall_64.c:63 entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:130 RIP: 0033:0x71624e8aafe2 Code: 08 0f 85 71 3a ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66 RSP: 002b:0000716157ffed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000113 RAX: ffffffffffffffda RBX: 0000716157fff6c0 RCX: 000071624e8aafe2 RDX: 000000000000005f RSI: 0000000000000000 RDI: 0000000000000066 RBP: 0000716157ffed90 R08: 0000000000008000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffff00 R13: 0000000000000021 R14: 0000000000000000 R15: 00007fff89799c40 </TASK> The TIPC_DUMP_ALL tracepoints in tipc_sk_enqueue() also dump sk_receive_queue and can therefore dereference skbs that the socket owner has already dequeued or freed. Restrict these dumps to TIPC_DUMP_SK_BKLGQ, which matches the queue protected by the held spinlock. Keep the change limited to the enqueue path, where the unsafe queue dump is reachable while the socket is owned by user context. | Aug 15, 2026 |
| CVE-2026-72298(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post() qrtr_endpoint_post() validates an incoming packet with if (!size || len != ALIGN(size, 4) + hdrlen) goto err; where size comes from the wire. On 32-bit, size_t is 32 bits and ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check passes and skb_put_data(skb, data + hdrlen, size) writes past the hdrlen-sized skb and oopses the kernel. 64-bit is unaffected. This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB Read in qrtr_endpoint_post"), which fixed only the 64-bit case. Reject any size that cannot fit the buffer before the ALIGN. | Aug 15, 2026 |
| CVE-2026-72297(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: net: atm: reject out-of-range traffic classes in QoS validation Reject ATM traffic classes above ATM_ANYCLASS in check_tp(). SO_ATMQOS stores the supplied QoS after check_qos() succeeds, so accepting larger values leaves invalid traffic_class values in vcc->qos. That bad state later reaches pvc_info(), which indexes class_name[] with vcc->qos.{rx,tp}.traffic_class. Values above ATM_ANYCLASS cause an out-of-bounds read when /proc/net/atm/pvc is read. Tighten the existing QoS validation so invalid traffic_class values are rejected at the point where user supplied QoS is accepted. | Aug 15, 2026 |
| CVE-2026-72296(opens NVD record) | Critical | 9.1 | In the Linux kernel, the following vulnerability has been resolved: net: ife: require ETH_HLEN to be pullable in ife_decode() ife decode may return after making only the outer IFE header and metadata pullable. The caller then passes the decapsulated packet to eth_type_trans(), which expects the inner Ethernet header to be accessible from the linear data area. With a malformed IFE frame, the inner Ethernet header may still be shorter than ETH_HLEN in the linear area, which can lead to a crash in the original code. Fix this by extending the pull check in ife_decode() so that the inner Ethernet header is also guaranteed to be pullable before returning. | Aug 15, 2026 |
| CVE-2026-72295(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Validate irqchip index in irqfd routing Sashiko reported that the irqchip index is not validated for LoongArch. Add validation and reject out-of-range irqchip indexes to avoid indexing past the routing table's chip array. | Aug 15, 2026 |
| CVE-2026-72294(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Check irq validity in kvm_vcpu_ioctl_interrupt() Function kvm_vcpu_ioctl_interrupt() can be called from userspace, here add irq validility cheking in kvm_vcpu_ioctl_interrupt(). | Aug 15, 2026 |
| CVE-2026-72293(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: KVM: s390: vsie: Add missing radix_tree_preload() in _gaccess_shadow_fault() Add missing radix_tree_preload() in _gaccess_shadow_fault() to guarantee forward progress. The core of _gaccess_shadow_fault() has been split into ___gaccess_shadow_fault() in order to simplify locking. | Aug 15, 2026 |
| CVE-2026-72292(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Initialize KVM_S390_GET_CMMA_BITS memory kvm_s390_get_cmma_bits() allocates its output buffer with vmalloc(), which does not zero the returned pages: values = vmalloc(args->count); In the non-peek (migration) path, dat_get_cmma() reports a byte count spanning from the first to the last dirty page, but __dat_get_cmma_pte() writes values[gfn - start] only for pages whose CMMA dirty bit is set. The walk uses DAT_WALK_IGN_HOLES, so clean and unmapped pages that lie between two dirty pages within the reported span are visited but never store their byte. Those gaps (up to KVM_S390_MAX_BIT_DISTANCE pages each) stay uninitialized yet fall inside [0, count) and are copied out by copy_to_user(), disclosing stale kernel memory to user space. Before the switch to the new gmap implementation the buffer was fully populated for every gfn in the span, so no uninitialized bytes were exposed; the dirty-only walk introduced the leak. Use vzalloc() so the gaps read back as zero. | Aug 15, 2026 |
| CVE-2026-72291(opens NVD record) | Critical | 9.3 | In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix unlikely race in try_get_locked_pte() Fix an unlikely race in try_get_locked_pte(), which could have happened if puds or pmds get unmapped between the p?dp_get() and p?d_offset() functions. | Aug 15, 2026 |
| CVE-2026-72290(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix GISC refcount leak on AIF enable failure kvm_s390_gisc_register() registers the guest ISC before pinning the guest interrupt forwarding pages and allocating the AISB bit. If any of the later setup steps fails, the function unwinds the pinned pages and other local state, but does not unregister the GISC reference. Add the missing kvm_s390_gisc_unregister() to the error unwind path. | Aug 15, 2026 |
| CVE-2026-72289(opens NVD record) | Critical | 9.3 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Check the interrupt is still ours before migrating it vgic_prune_ap_list() drops both ap_list_lock and irq_lock while migrating an interrupt to another vCPU. After reacquiring the locks it only checks that the affinity is unchanged (target_vcpu == vgic_target_oracle(irq)) before moving the interrupt, which assumes that an interrupt whose affinity is preserved is still queued on this vCPU's ap_list. That assumption no longer holds if the interrupt is taken off the ap_list while the locks are dropped. vgic_flush_pending_lpis() removes the interrupt from the list and sets irq->vcpu to NULL, but leaves enabled/pending/target_vcpu untouched. As the interrupt is still enabled and pending, vgic_target_oracle() returns the same target_vcpu, so the affinity check passes and list_del() is run a second time on an entry that has already been removed. Also check that the interrupt is still assigned to this vCPU (irq->vcpu == vcpu) before moving it. | Aug 15, 2026 |
| CVE-2026-72288(opens NVD record) | Critical | 9.3 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Handle race between interrupt affinity change and LPI disabling Hyunwoo Kim reports some really bad races should the following situation occur: - LPI-I is pending in vcpu-B's AP list - vcpu-A writes to vcpu-B's RD to disable its LPIs - vcpu-C moves I from B to C If the last two race nicely enough, vgic_prune_ap_list() can drop the irq and AP list locks, reacquire them, and in the interval the irq has been freed. UAF follows. The fix is two-fold: - Before dropping the irq and ap_list locks, take a reference on the irq - Do not try to handle migration of the pending bit: there is no expectation that this state is retained, as per the architecture With that, we're sure that the interrupt is still around, and we safely remove it from the AP list as it has no target at this stage (unless another interrupt fires, but that's another story). | Aug 15, 2026 |
| CVE-2026-72287(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Move vTPR vs. TPR Threshold consistency check into "normal" checks Move the off-by-default consistency check for vmcs12.tpr_threshold vs. the virtual APIC vTPR into the "normal" controls checks, as waiting until KVM has loaded some amount of state is unnecessary and actively dangerous. Specifically, failure to unwind vmcs01.GUEST_CR3 to KVM's value when EPT is disabled results in KVM running L1 with an L1-controlled CR3, not with KVM's CR3! Alternatively, KVM could simply reset the MMU to force a reload of vmcs01.GUEST_CR3, but the _only_ reason the check was shoved into a "late" flow was to wait until the vmcs12 pages were retrieved. Rather than build up more crusty code, simply access vTPR using a regular guest memory access (performance isn't a concern). To circumvent the restrictions that led to KVM deferring nested_get_vmcs12_pages(), (a) use a VM-scoped API to read guest memory so that it always hits non-SMM memslots (for RSM), and (b) skip the check (since its off-by-default anyways) when the vCPU doesn't want to run, i.e. when userspace is restoring/stuffing state. If reading guest memory fails, simply skip the consistency check, as KVM's de facto ABI is that VMX instruction accesses to non-existent memory get PCI Bus Error semantics, where reads return 0xFFs. And if vTPR=0xFF, then the vTPR is guaranteed to be greater than or equal to TPR_THRESHOLD. | Aug 15, 2026 |
| CVE-2026-72286(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Do not allow intra-host migration/mirroring of SNP VMs The intra-host migration/mirroring feature is not fully implemented for SEV-SNP VMs. The proper migration requires additional SNP-specific state such as guest_req_mutex, guest_req_buf, and guest_resp_buf to be transferred or initialized on the destination. The SNP VM mirroring requires vmsa features to be copied as well otherwise ASID would be bound to SNP range while VM is detected as a SEV VM. Reject SNP source VMs in migration/mirroring until proper SNP state transfer is implemented. [sean: let lines poke past 80 chars, tag for stable] | Aug 15, 2026 |
| CVE-2026-72285(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Reject concurrent change to CPUID entry count Reject KVM_TDX_INIT_VM if userspace changes cpuid.nent between the initial read and the subsequent copy of the initialization data. tdx_td_init() first reads user_data->cpuid.nent to size the flexible kvm_tdx_init_vm copy. The copied structure also contains cpuid.nent, and that field can differ from the value used to size the allocation if userspace modifies the input concurrently. setup_tdparams_cpuids() later passes init_vm->cpuid.nent to kvm_find_cpuid_entry2(), which uses it as the array bound for the copied entries. Require the copied count to match the value used to size the allocation so that CPUID parsing cannot access beyond the entries actually copied. | Aug 15, 2026 |
| CVE-2026-72284(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ignore pending PV EOI if the vCPU has since disabled PV EOIs Ignore KVM's internal "service pending PV EOI" request if the vCPU has disabled PV EOIs since the request was made. Asserting that PV EOIs are enabled can fail if reading guest memory in pv_eoi_get_user() fails, i.e. if pv_eoi_test_and_clr_pending() bails early, *and* the vCPU also disables PV EOIs. kernel BUG at arch/x86/kvm/lapic.c:3338! Oops: invalid opcode: 0000 [#1] SMP CPU: 4 UID: 1000 PID: 890 Comm: pv_eoi_test Not tainted 7.0.0-d585aa5894d8-vm #337 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_lapic_sync_from_vapic+0x12b/0x140 [kvm] Call Trace: <TASK> kvm_arch_vcpu_ioctl_run+0x1075/0x1c30 [kvm] kvm_vcpu_ioctl+0x2d5/0x980 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb5/0xb40 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Modules linked in: kvm_intel kvm irqbypass ---[ end trace 0000000000000000 ]--- | Aug 15, 2026 |
| CVE-2026-72283(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Nullify irqfd->producer if updating IRTE for bypass fails Nullify irqfd->producer if updating the IRTE for bypass fails, as leaving a dangling pointer will result in a use-after-free if the irqfd is reachable through KVM's routing, but the producer is freed separately. E.g. for VFIO PCI, the producer is embedded in struct "vfio_pci_irq_ctx" and freed when the vector is disabled, which can happen independent of routing updates. [sean: drop PPC change, massage changelog] | Aug 15, 2026 |
| CVE-2026-72282(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: KVM: Move kvm_io_bus_get_dev() locking responsibilities to callers kvm_io_bus_get_dev() returns a device that is only matched by the address, and nothing else. This can cause a lifetime issue if the matched device is not the expected type, as by the time the caller can introspect the object, it might be gone (the srcu lock having been dropped). Given that there is only a single user of this helper, the simplest option is to move the locking responsibility to the caller, which can keep the srcu lock held for as long as it wants. Note that this aligns with other kvm_io_bus*() helpers, which already require the srcu lock to be held by the callers. | Aug 15, 2026 |
| CVE-2026-72281(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: account pKVM reclaim against the VM mm Protected guest faults charge long term pins to the VM's mm. Teardown can run later from file release, where current->mm may be unrelated. Drop the charge from kvm->mm instead. | Aug 15, 2026 |
| CVE-2026-72280(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Drop bogus WARN for write to ZCR_EL2 It is entirely possible for a guest to write to the ZCR_EL2 sysreg alias while in a nested context, as it is expected if FEAT_NV2 is advertised to the L1 hypervisor. Get rid of the bogus WARN which, since the hyp vectors were installed at this point, has the effect of a hyp_panic... | Aug 15, 2026 |
| CVE-2026-72279(opens NVD record) | Critical | 9.0 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Respect read-only PFN when mapping L1 VNCR KVM currently maps the L1 VNCR into the host stage-1 by relying entirely on the permissions of the guest stage-1. At the same time, it is entirely possible that the backing PFN is read-only (e.g. RO memslot), meaning that the L1 VNCR should use at most a read-only mapping. Cache the writability of the PFN in the VNCR TLB and use it to constrain the resulting fixmap permissions. Promote VNCR permission faults to an SEA in the case where the guest attempts to write to a read-only endpoint. Conveniently, this also plugs a page leak found by Sashiko [*] resulting from the early return for a read-only PFN. | Aug 15, 2026 |
| CVE-2026-72278(opens NVD record) | Critical | 9.3 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Re-translate VNCR before injecting abort KVM faults in the VNCR page with FOLL_WRITE whenever the guest aborts for a write, similar to how a regular stage-2 mapping is handled. It is entirely possible that the guest reads from the VNCR before writing to it, in which case the PFN could only be read-only. Invalidate the VNCR TLB and re-fetch the translation upon taking a VNCR abort, allowing the host mapping to be faulted in for write the second time around. Interestingly enough, this also satisfies the ordering requirements of FEAT_ETS2/3 between descriptor updates and MMU faults. | Aug 15, 2026 |
| CVE-2026-72277(opens NVD record) | Critical | 9.3 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Inject SEA if guest VNCR isn't normal memory When constructing an L1 VNCR mapping, KVM unconditionally uses cacheable memory attributes, even if the underlying PFN isn't memory. This gets particularly hairy if the endpoint doesn't support cacheable memory attributes, potentially throwing an SError on writeback... While KVM does permit cacheable memory attributes on certain PFNMAP VMAs, kvm_translate_vncr() isn't currently grabbing the VMA. So do the simpler thing for now and just reject everything that isn't memory. | Aug 15, 2026 |
| CVE-2026-72276(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: fbdev: metronomefb: fix potential memory leak in metronomefb_probe() The memory allocated for pagerefs in fb_deferred_io_init() is not freed on the error path. Fix it by calling fb_deferred_io_cleanup(). | Aug 15, 2026 |
| CVE-2026-72275(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: fbdev: broadsheetfb: fix potential memory leak in broadsheetfb_probe() The memory allocated for pagerefs in fb_deferred_io_init() is not freed on the error path. Fix it by calling fb_deferred_io_cleanup(). | Aug 15, 2026 |
| CVE-2026-72274(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: fbdev: hecubafb: fix potential memory leak in hecubafb_probe() The memory allocated for pagerefs in fb_deferred_io_init() is not freed on the error path. Fix it by calling fb_deferred_io_cleanup(). | Aug 15, 2026 |