Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
36,740 matching · page 137/735Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-72373(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: afs: Fix missing NULL pointer check in afs_break_some_callbacks() Fix afs_break_some_callbacks() to check to see if afs_lookup_volume_rcu() returned NULL (e.g. the specified volume is unknown). | Aug 15, 2026 |
| CVE-2026-72372(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: afs: Fix lack of locking around modifications of net->cells_dyn_ino Fix the lack of locking around modifications of net->cells_dyn_ino by taking net->cells_lock exclusively. This also requires to cell to be removed from net->cells_dyn_ino in afs_destroy_cell_work() rather than in afs_cell_destroy() as the latter runs in RCU cleanup context and sleeping locks cannot be taken there. | Aug 15, 2026 |
| CVE-2026-72371(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: afs: Fix the volume AFS_VOLUME_RM_TREE is set on Fix afs_insert_volume_into_cell() to set AFS_VOLUME_RM_TREE on the volume replaced, not the new volume, as it's now removed from the cell's volume tree. This will cause the old volume to be removed from the tree twice and the new volume never to be removed. | Aug 15, 2026 |
| CVE-2026-72370(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: iomap: release pages on atomic dio size mismatch If bio_iov_iter_get_pages() or the bounce helper succeeds but builds a short bio, the REQ_ATOMIC size check rejects it before submission. The old error path only dropped the bio reference, leaving any pages already attached to the bio unreleased. Release or unbounce the pages before falling through to out_put_bio on this error path. This bug was reported by sashiko: https://sashiko.dev/#/patchset/20260608073134.95964-1-changfengnan%40bytedance.com | Aug 15, 2026 |
| CVE-2026-72369(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: minix: avoid overflow in bitmap block count calculation minix_check_superblock() uses minix_blocks_needed() to verify that the on-disk imap and zmap block counts are large enough for the advertised inode and zone counts. The helper currently performs DIV_ROUND_UP() in unsigned int arithmetic. A Minix v3 image can set s_ninodes or s_zones near UINT_MAX so the addition inside DIV_ROUND_UP() wraps to zero. That makes a zero imap/zmap block count look valid, after which minix_fill_super() can dereference s_imap[0] or s_zmap[0] even though no bitmap buffers were allocated. Impact: mounting a crafted Minix v3 image whose s_ninodes or s_zones is near UINT_MAX makes minix_check_superblock() accept a zero bitmap-block count and minix_fill_super() dereference s_imap[0]/s_zmap[0], panicking the kernel. The divisor is the bitmap capacity in bits, blocksize * 8, which is always a power of two: minix_fill_super() obtains the block size through sb_set_blocksize(), and blk_validate_block_size() rejects any size that is not a power of two. Use DIV_ROUND_UP_POW2(), which divides before adding the round-up term and so cannot overflow for a power-of-two divisor. | Aug 15, 2026 |
| CVE-2026-72368(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix double unlock in nomem_d_alloc error path When start_creating() fails and returns -ENOMEM, it has already released the parent directory lock in __start_dirop(): static struct dentry *__start_dirop(...) { ... inode_lock_nested(dir, I_MUTEX_PARENT); dentry = lookup_one_qstr_excl(name, parent, lookup_flags); if (IS_ERR(dentry)) inode_unlock(dir); <-- Lock released on error return dentry; } However, the nomem_d_alloc error path in cachefiles_get_directory() unconditionally calls inode_unlock(d_inode(dir)) again, causing a double unlock that corrupts the rwsem state. This is a leftover from commit 7ab96df840e60 which replaced manual locking with start_creating() but failed to update the nomem_d_alloc path (while correctly updating mkdir_error and lookup_error paths). | Aug 15, 2026 |
| CVE-2026-72367(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: iomap: guard io_size EOF trim against concurrent truncate underflow iomap: fix zero padding data issue in concurrent append writes changed ioend accounting so that io_size tracks only valid data within EOF. This trims io_size when a writeback range extends past end_pos: ioend->io_size += map_len; if (ioend->io_offset + ioend->io_size > end_pos) ioend->io_size = end_pos - ioend->io_offset; However, if end_pos ends up below ioend->io_offset, the subtraction becomes negative and is stored in size_t io_size, causing an unsigned wrap to a huge value. This can happen when writeback continues past byte-level EOF up to a block-aligned range, or when a concurrent truncate shrinks the file after end_pos was sampled in iomap_writeback_handle_eof(). A wrapped io_size can mislead append detection and corrupt completion-time size handling, since filesystem end_io paths consume io_size for decisions such as on-disk EOF updates and unwritten/COW completion ranges. Fix this by clamping io_size to zero when EOF has moved to or before the ioend start offset. This preserves the original intent of trimming io_size to valid in-EOF data while avoiding the underflow. | Aug 15, 2026 |
| CVE-2026-72366(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_create_write_req() to handle async cache object creation netfs_create_write_req() will skip caching if the fscache cookie is disabled, but this is a problem because async cache object creation might not have got far enough yet that has been enabled - thereby causing the call to fscache_begin_write_operation() to be skipped. Fix this by removing the checks on the cookie and delegating this to fscache_begin_write_operation(). | Aug 15, 2026 |
| CVE-2026-72365(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix writethrough to use collection offload Fix writethrough write to set NETFS_RREQ_OFFLOAD_COLLECTION on the request so that collection is processed asynchronously rather than only right at the end - and also so that asynchronous O_SYNC writes get collected at all. | Aug 15, 2026 |
| CVE-2026-72364(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix writeback error handling Fix the error handling in writeback_iter() loop. If an error occurs, writeback_iter() needs to be called again with *error set to the error so that it can clean up iteration state. Further, the current folio needs unlocking and redirtying. | Aug 15, 2026 |
| CVE-2026-72363(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio state after ENOMEM whilst under writeback iteration Fix the state of the current folio when ENOMEM occurs during writeback iteration. The folio needs to be redirtied and unlocked before the terminal writeback_iter() is invoked. | Aug 15, 2026 |
| CVE-2026-72362(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/xe/pt: Fix NULL pointer dereference in xe_pt_zap_ptes_entry() The page-table walk framework may pass a NULL *child pointer for unpopulated entries. xe_pt_zap_ptes_entry() called container_of(*child) before checking for NULL, then dereferenced the result, causing a crash. Move the container_of() call after a NULL guard, so the function returns early instead of proceeding with an invalid pointer. XE_WARN_ON is kept to help root cause the issue, but we now bail instead of crashing the driver. v2: Comment that triggering XE_WARN_ON is unexpected behavior (Matt Brost) (cherry picked from commit b9297d19d9df5d4b6c994648570c5dcd1cac68ff) | Aug 15, 2026 |
| CVE-2026-72361(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/xe/hw_engine: Fix double-free of managed BO in error path The error path in hw_engine_init() explicitly frees a BO allocated with xe_managed_bo_create_pin_map() via xe_bo_unpin_map_no_vm(). Since the managed BO already has a devm cleanup action registered, this causes a double-free when devm unwinds during probe failure. Remove the explicit free and let devm handle it, consistent with all other xe_managed_bo_create_pin_map() callers. (cherry picked from commit e459a3bdeb117be496d7f229e2ea1f6c9fe4080b) | Aug 15, 2026 |
| CVE-2026-72360(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays Currently defined VF/PF relay actions use regular REQUEST messages only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT messages as this would result in breaking the VFPF ABI protocol and also might trigger an assert on the PF side. (cherry picked from commit 1714d360fc5ae2e0886a69e979095d9c7ff3568a) | Aug 15, 2026 |
| CVE-2026-72359(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/xe: fix NPD in bo_meminfo() When a buffer object is purged, its ttm.resource is set to NULL via the TTM pipeline gutting flow. However, the BO remains in the client's object list until userspace explicitly closes the GEM handle. If memory stats are queried during this time, accessing bo->ttm.resource->mem_type will result in a NULL pointer dereference. Fix this by safely skipping purged BOs in bo_meminfo, as they no longer consume any memory. User is getting NPD on device resume, and possible theory is that in bo_move(), if we need to evict something to SYSTEM to save the CCS state, but the BO is marked as dontneed, this won't trigger a move but will nuke the pages, leaving us with a NULL bo resource. And the meminfo() doesn't look ready to handle a NULL resource. v2 (Sashiko): - There could potentially be other cases where we might end up with a NULL resource, so make this a general NULL check for now. (cherry picked from commit c9a8e7daa0afe3161111e27fd92176e608c7f186) | Aug 15, 2026 |
| CVE-2026-72358(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/pt: prevent invalid cursor access for purged BOs During a page table walk for binding, xe_pt_stage_bind() explicitly skips initializing the xe_res_cursor for purged BOs, treating them similarly to NULL VMAs by only setting the cursor size. However, xe_pt_hugepte_possible() and xe_pt_scan_64K() did not check if the BO was purged before attempting to walk the cursor using xe_res_dma() and xe_res_next(). Because the cursor was left uninitialized for purged BOs, this falls through and triggers warnings like: WARNING: drivers/gpu/drm/xe/xe_res_cursor.h:274 at xe_res_next Fix this by explicitly checking if the BO is purged in both xe_pt_hugepte_possible() and xe_pt_scan_64K(), returning early just as we do for NULL VMAs, avoiding the invalid cursor accesses entirely. As a precaution, also zero-initialize the cursor in xe_pt_stage_bind() to ensure we don't pass garbage data into the page table walkers if we ever hit a similar edge case in the future. (cherry picked from commit 4c7b9c6ece32440e5a435a92076d049450cd2d2e) | Aug 15, 2026 |
| CVE-2026-72357(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline In the unregister path we use __in_uprobe_trampoline check with current->mm for the VMA lookup, which is wrong, because we are in the tracer context, not the traced process. Add mm_struct pointer argument to __in_uprobe_trampoline and changing related callers to pass proper mm_struct pointer. | Aug 15, 2026 |
| CVE-2026-72356(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: cifs: Fix missing credit release on failure in cifs_issue_read() Fix missing release of credits in the failure path in cifs_issue_read() lest retrying the subreq just overwrites the credits value. | Aug 15, 2026 |
| CVE-2026-72355(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix barriering when walking subrequest list Fix the barriering used when walking the subrequest list in retry as there's a possibility of seeing a subreq that's just been added by the application thread. | Aug 15, 2026 |
| CVE-2026-72354(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid stale runlist element dereference in MFT writeback ntfs_write_mft_block() maps each $MFT record through the $MFT data runlist. For sub-folio clusters it looks up a struct runlist_element under ni->runlist.lock, drops the lock, and later uses rl->length and rl->vcn when choosing folio_sz. That pointer is only borrowed from ni->runlist.rl. Concurrent $MFT allocation extension can merge a replacement runlist under the same lock, and ntfs_rl_realloc() can free the old backing array. If that happens between the lookup and the later folio_sz decision, writeback can dereference freed runlist storage. The buggy scenario involves two paths, with each column showing the order within that path: MFT writeback path: $MFT allocation extension: 1. Look up rl under 1. Extend the $MFT data allocation. ni->runlist.lock. 2. Publish a replacement runlist. 2. Drop ni->runlist.lock. 3. Free the old runlist array. 3. Read rl->length and rl->vcn to choose folio_sz. Compute the remaining run length while ni->runlist.lock is still held, and use that scalar after unlock. This preserves the existing folio sizing decision without carrying a borrowed runlist_element across the lock boundary. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in ntfs_mft_writepages+0x1c8d/0x1fb0 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? ntfs_mft_writepages+0x1c8d/0x1fb0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20d/0x410 ? ntfs_mft_writepages+0x1c8d/0x1fb0 kasan_report+0xe0/0x110 ? ntfs_mft_writepages+0x1c8d/0x1fb0 ntfs_mft_writepages+0x1c8d/0x1fb0 ? __pfx_ntfs_mft_writepages+0x10/0x10 ? __pfx___mutex_unlock_slowpath+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? iput+0x92/0xa80 do_writepages+0x219/0x530 ? __pfx_do_writepages+0x10/0x10 __writeback_single_inode+0x117/0xf50 ? do_raw_spin_lock+0x130/0x270 ? __pfx_do_raw_spin_lock+0x10/0x10 ? __pfx___writeback_single_inode+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 writeback_sb_inodes+0x65b/0x1810 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x2b8/0x2f0 ? __pfx_writeback_sb_inodes+0x10/0x10 ? lock_release+0x1e0/0x280 ? _raw_spin_unlock+0x23/0x40 ? move_expired_inodes+0x2b8/0x850 __writeback_inodes_wb+0xf4/0x270 ? __pfx___writeback_inodes_wb+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? queue_io+0x2e4/0x410 wb_writeback+0x666/0x880 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_wb_writeback+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? get_nr_dirty_inodes+0x1c/0x170 wb_workfn+0x75e/0xbb0 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x27/0x60 ? __pfx_wb_workfn+0x10/0x10 ? __pfx_debug_object_deactivate+0x10/0x10 ? lock_acquire+0x2b8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0x1e0/0x280 process_one_work+0x8d0/0x1870 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x575/0xf80 ? __pfx_worker_thread+0x10/0x10 kthread+0x2e7/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x576/0x810 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x57e/0xe10 ? __switch_to_asm+0x33/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 970: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kvmalloc_node_noprof+0x353/0x920 ntfs_rl_realloc+0x3c/0x80 ntfs_runlists_merge+0x1212/0x3010 ntfs_mft_data_extend_allocation_nolock+0x3e0/0x1f40 ntfs_mft_record_alloc+0x1ab4/0x4f10 __ntfs_create+0x680/0x2e50 ntfs_create+0x1e6/0x3a0 path_openat+0x2b55/0x3c10 do_file_open+0x1f4/0x460 do_sys_openat2+0xde/0x170 __x64_sys_openat+0x122/0x1e0 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1294: kasan_save_ ---truncated--- | Aug 15, 2026 |
| CVE-2026-72353(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid stale runlist element dereference in fallocate ntfs_attr_fallocate() allocates holes and delayed allocations inside initialized size by looking up the current runlist element under ni->runlist.lock. The returned struct runlist_element is only a borrowed pointer into ni->runlist.rl. A writer can replace and free that array after the read lock is dropped, so later reads of rl->lcn, rl->length and rl->vcn can touch freed memory. The buggy scenario involves two paths, with each column showing the order within that path: ntfs_attr_fallocate(): 1. Take ni->runlist.lock for read. 2. Get rl from ntfs_attr_find_vcn_nolock(). 3. Drop ni->runlist.lock. 4. Read rl->lcn, rl->length and rl->vcn. mmap page_mkwrite: 1. Enter ntfs_filemap_page_mkwrite(). 2. Reach __ntfs_write_iomap_begin() and ntfs_attr_map_cluster(). 3. Merge allocation state with ntfs_runlists_merge(). 4. Reallocate ni->runlist.rl in ntfs_rl_realloc(), freeing the old array. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in ntfs_attr_fallocate+0xbb8/0xd00 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? ntfs_attr_fallocate+0xbb8/0xd00 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20d/0x410 ? ntfs_attr_fallocate+0xbb8/0xd00 kasan_report+0xe0/0x110 ? ntfs_attr_fallocate+0xbb8/0xd00 ntfs_attr_fallocate+0xbb8/0xd00 ? lock_acquire+0x2b8/0x2f0 ? __pfx_ntfs_attr_fallocate+0x10/0x10 ? 0xffffffffc0000095 ? down_write+0x10d/0x1e0 ntfs_fallocate+0x5c9/0x1d00 ? __pfx_ntfs_fallocate+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x2b8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? selinux_file_permission+0x3a7/0x510 vfs_fallocate+0x29d/0xd30 __x64_sys_fallocate+0xc7/0x150 ? do_syscall_64+0x81/0x6a0 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 410: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kvmalloc_node_noprof+0x353/0x920 ntfs_rl_realloc+0x3f/0x110 ntfs_runlists_merge+0xaa3/0x3010 ntfs_attr_map_cluster+0x4e5/0xf80 ntfs_attr_fallocate+0x53f/0xd00 ntfs_fallocate+0x5c9/0x1d00 vfs_fallocate+0x29d/0xd30 __x64_sys_fallocate+0xc7/0x150 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 424: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x307/0x580 ntfs_rl_realloc+0x6f/0x110 ntfs_runlists_merge+0x7b1/0x3010 ntfs_attr_map_cluster+0x4e5/0xf80 __ntfs_write_iomap_begin+0x8cd/0x2280 iomap_iter+0x6de/0x11e0 iomap_page_mkwrite+0x391/0x650 ntfs_filemap_page_mkwrite+0x1ac/0x400 do_page_mkwrite+0x15c/0x280 __handle_mm_fault+0xd6d/0x1ca0 handle_mm_fault+0x19c/0x470 do_user_addr_fault+0x23b/0x9c0 exc_page_fault+0x5c/0xc0 asm_exc_page_fault+0x26/0x30 Fix this by copying the needed runlist fields while the read lock is still held and using only those scalar snapshots after unlocking. After the snapshot, ntfs_attr_map_cluster() can also find that the range is already mapped and return balloc=false. Only call ntfs_dio_zero_range() when new clusters were allocated, matching the write iomap path and preserving the zero-newly-allocated-holes behavior. | Aug 15, 2026 |
| CVE-2026-72352(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: HID: bpf: Fix hid_bpf_get_data() range check hid_bpf_get_data() returns a pointer into the HID-BPF context data when the caller-provided offset and size fit inside ctx->allocated_size. The current check adds rdwr_buf_size and offset before comparing the result against ctx->allocated_size. Since both values are unsigned, a very large size can wrap the sum below ctx->allocated_size and make the helper return a pointer even though the requested range is not contained in the backing buffer. Use check_add_overflow() to reject wrapped range ends before comparing the requested range end against ctx->allocated_size. | Aug 15, 2026 |
| CVE-2026-72351(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: gue: validate REMCSUM private option length GUE private flags can indicate that remote checksum offload metadata is present. The private flags field itself is accounted for by guehdr_flags_len(), but guehdr_priv_flags_len() currently returns 0 even when GUE_PFLAG_REMCSUM is set. This lets a packet with only the private flags field pass validate_gue_flags(), after which gue_remcsum() and gue_gro_remcsum() read the missing REMCSUM start/offset fields from the following bytes. Account for GUE_PLEN_REMCSUM when GUE_PFLAG_REMCSUM is present so that malformed packets are rejected during option validation. | Aug 15, 2026 |
| CVE-2026-72350(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_u32: reject invalid shift counts u32_match_it() executes rule-supplied shift operands on a 32-bit value. A malformed u32 rule can provide a shift count of 32 or more, triggering an undefined shift out-of-bounds during packet evaluation. Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in u32_mt_checkentry() and reject malformed rules before they reach the packet path. | Aug 15, 2026 |
| CVE-2026-72349(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt() On links faster than ~34 Gbps, where byte rate may exceed 2^32-1 (~ 4.3 GBps), the comparison result becomes incorrect because the truncated value no longer reflects the actual estimator rate. Fix by changing the local variables to u64. | Aug 15, 2026 |
| CVE-2026-72348(opens NVD record) | Critical | 9.1 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop The ah, hbh and rt matches check that the fixed extension header is present, then use the header length field to derive the advertised extension header length for matching. For the ah match, add the missing advertised-length check. For hbh and rt, update the existing advertised-length checks. In all three cases, set hotdrop to true before returning false when the advertised extension header length exceeds the available skb data. Returning false treats the packet as a rule mismatch. Set hotdrop to true and drop malformed packets so they cannot bypass rules intended to drop packets with these IPv6 extension headers. | Aug 15, 2026 |
| CVE-2026-72347(opens NVD record) | High | 7.3 | In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_connmark: reject invalid shift parameters Revision 2 of the CONNMARK target accepts user-controlled shift parameters and applies them to 32-bit mark values in connmark_tg_shift(). A shift_bits value of 32 or more triggers an undefined-shift bug when the rule is evaluated. Invalid shift_dir values are also accepted and silently fall back to the left-shift path. Reject invalid revision-2 shift parameters in connmark_tg_check() so malformed rules fail at installation time, before they can reach the packet path. | Aug 15, 2026 |
| CVE-2026-72346(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: platform/x86: bitland-mifs-wmi: Fix NULL pointer dereference during suspend/resume The driver registers two distinct WMI devices: a control device (BITLAND_WMI_CONTROL) and an event device (BITLAND_WMI_EVENT). During the probe phase, the event device handling path returns early before initializing the platform profile device (data->pp_dev), leaving it NULL. However, the PM sleep operations are registered globally for the WMI driver and are triggered for both devices. When entering suspend, the event device invokes bitland_mifs_wmi_suspend(), which passes the uninitialized data->pp_dev (NULL) into laptop_profile_get(). This leads to a NULL pointer dereference inside dev_get_drvdata(), causing a kernel Oops and halting the suspend sequence. Fix this by adding a validity check for data->pp_dev in both the suspend and resume callbacks, safely skipping profile operations for the event device. | Aug 15, 2026 |
| CVE-2026-72345(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, Fix off-by-one in single-FDB error rollback On failure at index i, the reverse cleanup loop in mlx5_lag_create_single_fdb() starts from i, so the failed index itself is rolled back. That can operate on uninitialized state or double-tear-down a rule the add_one path already self-rolled-back. Start the rollback from i - 1 so only successfully-installed entries are undone. | Aug 15, 2026 |
| CVE-2026-72344(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, skip peer flow cleanup when LAG seq is unavailable mlx5_lag_get_dev_seq() will return error when the peer isn't in the LAG or when no device is marked as master. Result bad memory access and kernel crash[1]. Hence, skip the peer when lookup fails. Note: In case there are peer flows, they are cleaned before LAG cleared the master mark. [1] RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0x3d/0x350 [mlx5_core] Call Trace: <TASK> mlx5e_tc_clean_fdb_peer_flows+0xc1/0x130 [mlx5_core] mlx5_esw_offloads_unpair+0x3a/0x400 [mlx5_core] mlx5_esw_offloads_devcom_event+0xee/0x360 [mlx5_core] mlx5_devcom_send_event+0x7a/0x140 [mlx5_core] mlx5_esw_offloads_devcom_cleanup+0x2f/0x90 [mlx5_core] mlx5e_tc_esw_cleanup+0x28/0xf0 [mlx5_core] mlx5e_rep_tc_cleanup+0x19/0x30 [mlx5_core] mlx5e_cleanup_uplink_rep_tx+0x36/0x40 [mlx5_core] mlx5e_cleanup_rep_tx+0x55/0x60 [mlx5_core] mlx5e_detach_netdev+0x96/0xf0 [mlx5_core] mlx5e_netdev_change_profile+0x5b/0x120 [mlx5_core] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core] mlx5e_vport_rep_unload+0xdd/0x110 [mlx5_core] __esw_offloads_unload_rep+0x81/0xb0 [mlx5_core] mlx5_eswitch_unregister_vport_reps+0x1d7/0x220 [mlx5_core] mlx5e_rep_remove+0x22/0x30 [mlx5_core] device_release_driver_internal+0x194/0x1f0 bus_remove_device+0xe8/0x1b0 device_del+0x159/0x3c0 mlx5_rescan_drivers_locked+0xbc/0x2d0 [mlx5_core] mlx5_unregister_device+0x54/0x80 [mlx5_core] mlx5_uninit_one+0x73/0x130 [mlx5_core] remove_one+0x78/0xe0 [mlx5_core] pci_device_remove+0x39/0xa0 | Aug 15, 2026 |
| CVE-2026-72343(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix HV VHCA stats zero-sized buffer allocation mlx5e_hv_vhca_stats_create() is called from mlx5e_nic_enable(), before mlx5e_open(). At that point priv->stats_nch is still zero, because it is only ever incremented in mlx5e_channel_stats_alloc(), which is reached only from mlx5e_open_channel(). mlx5e_hv_vhca_stats_buf_size() therefore returns 0, and kvzalloc(0, GFP_KERNEL) returns ZERO_SIZE_PTR ((void *)16) rather than NULL. The "if (!buf)" guard does not catch this, and mlx5e_hv_vhca_stats_create() completes "successfully" with priv->stats_agent.buf set to ZERO_SIZE_PTR. Once channels are opened (priv->stats_nch > 0) and the hypervisor enables stats reporting, mlx5e_hv_vhca_stats_work() recomputes buf_len using the new non-zero stats_nch and calls memset(buf, 0, buf_len) on ZERO_SIZE_PTR, faulting at address 0x10. Allocate the buffer based on priv->max_nch, which is set in mlx5e_priv_init() and is the upper bound on stats_nch: - Add a separate helper mlx5e_hv_vhca_stats_buf_max_size() that returns sizeof(per_ring_stats) * max(max_nch, stats_nch), and use it for the kvzalloc() in mlx5e_hv_vhca_stats_create(). - Keep mlx5e_hv_vhca_stats_buf_size() (which returns based on stats_nch) for the worker's active payload size, so the wire format (block->rings = stats_nch) and the amount of data filled by mlx5e_hv_vhca_fill_stats() are unchanged. The max(max_nch, stats_nch) guard handles the rare case where mlx5e_attach_netdev() recomputes max_nch downward across a detach/resume cycle while priv->stats_nch persists (mlx5e_detach_netdev does not call mlx5e_priv_cleanup, so stats_nch is only reset when the netdev is destroyed). Without the guard, the worker could compute buf_len from stats_nch and overrun the smaller buffer allocated based on the reduced max_nch. Allocating a non-zero buffer also makes the kvzalloc() failure path in mlx5e_hv_vhca_stats_create() reachable for the first time: it returns early without (re)creating the agent. Clear priv->stats_agent.{agent,buf} in mlx5e_hv_vhca_stats_destroy() after freeing them, so that if a later create() bails out on this path, a subsequent teardown does not double-free the stale agent/buffer left from a previous enable/disable cycle. This mirrors the existing mlx5e pattern of preallocating arrays of size max_nch (e.g. priv->channel_stats) and lazily populating entries up to stats_nch on demand. | Aug 15, 2026 |
| CVE-2026-72342(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix HV VHCA stats agent registration race mlx5e_hv_vhca_stats_create() registers the stats agent through mlx5_hv_vhca_agent_create(). The helper publishes the agent in hv_vhca->agents[type] under agents_lock and immediately schedules an asynchronous control invalidation on the HV VHCA workqueue before returning to mlx5e. The asynchronous invalidation invokes the control agent's invalidate callback, which reads the hypervisor control block and forwards the command to mlx5e_hv_vhca_stats_control(). That callback may either: - call cancel_delayed_work_sync(&priv->stats_agent.work), or - call queue_delayed_work(priv->wq, &sagent->work, sagent->delay). However, the delayed_work and priv->stats_agent.agent are only initialized after mlx5_hv_vhca_agent_create() returns to mlx5e: agent = mlx5_hv_vhca_agent_create(...); /* publish + invalidate */ ... priv->stats_agent.agent = agent; /* too late */ INIT_DELAYED_WORK(&priv->stats_agent.work, ...); /* too late */ If the asynchronous control path runs before the two assignments above, it can: - Operate on an uninitialized delayed_work whose timer.function is NULL. queue_delayed_work() calls add_timer() unconditionally, so when the timer expires the timer softirq invokes a NULL function pointer. - Re-initialize the timer later through INIT_DELAYED_WORK() while the timer is already enqueued in the timer wheel, corrupting the hlist (entry.pprev cleared while the previous bucket node still points at this entry). - When the worker eventually runs, mlx5e_hv_vhca_stats_work() reads sagent->agent (NULL) and dereferences it inside mlx5_hv_vhca_agent_write(). Fix this by: - Initializing priv->stats_agent.work before invoking mlx5_hv_vhca_agent_create(), so the work is always in a valid state when the control callback observes it. - Adding a struct mlx5_hv_vhca_agent **ctx_update out-parameter to mlx5_hv_vhca_agent_create(). The helper writes the agent pointer to *ctx_update before publishing into hv_vhca->agents[] and triggering the agents_update flow, so any callback subsequently invoked from that flow already sees a valid priv->stats_agent.agent. This avoids having the control callback participate in agent initialization. While at it, access priv->stats_agent.agent with READ_ONCE()/WRITE_ONCE() for the cross-CPU access with the worker, and clear priv->stats_agent.buf on the agent_create() failure path. | Aug 15, 2026 |
| CVE-2026-72341(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix publication race for priv->channel_stats[] mlx5e_channel_stats_alloc() publishes a new entry to priv->channel_stats[] and then increments priv->stats_nch as a publication token, but neither store carries any memory barrier: priv->channel_stats[ix] = kvzalloc_node(...); if (!priv->channel_stats[ix]) return -ENOMEM; priv->stats_nch++; Concurrent readers compute the loop bound from priv->stats_nch and then dereference priv->channel_stats[i] using plain accesses, e.g. for (i = 0; i < priv->stats_nch; i++) { struct mlx5e_channel_stats *cs = priv->channel_stats[i]; ... cs->rq.packets ... } On weakly-ordered architectures (ARM, PowerPC, RISC-V) the writes to channel_stats[ix] and stats_nch may become visible to other CPUs out of program order. A reader can observe stats_nch == N while still seeing channel_stats[N-1] == NULL, leading to a NULL pointer dereference in the channel_stats loop. This has been observed in production on BlueField-3 DPUs (arm64), where ovs-vswitchd queries netdev statistics over netlink during NIC bringup, racing mlx5e_open_channel() -> mlx5e_channel_stats_alloc() on another CPU: Unable to handle kernel NULL pointer dereference at virtual address 0x840 Hardware name: BlueField-3 DPU pc : mlx5e_fold_sw_stats64+0x30/0x180 [mlx5_core] Call trace: mlx5e_fold_sw_stats64+0x30/0x180 [mlx5_core] dev_get_stats+0x50/0xc0 ovs_vport_get_stats+0x38/0xac [openvswitch] ovs_vport_cmd_fill_info+0x194/0x290 [openvswitch] ovs_vport_cmd_get+0xbc/0x10c [openvswitch] genl_family_rcv_msg_doit+0xd0/0x160 genl_rcv_msg+0xec/0x1f0 netlink_rcv_skb+0x64/0x130 genl_rcv+0x40/0x60 netlink_unicast+0x2fc/0x370 netlink_sendmsg+0x1dc/0x454 ... __arm64_sys_sendmsg+0x2c/0x40 Add mlx5e_stats_nch_write() and mlx5e_stats_nch_read() helpers in en.h that wrap the smp_store_release()/smp_load_acquire() pair on stats_nch. The release/acquire pair establishes the contract: stats_nch == N => channel_stats[0..N-1] are visible and non-NULL. Publish the stats_nch increment via mlx5e_stats_nch_write() in the writer (mlx5e_channel_stats_alloc()), and read stats_nch via mlx5e_stats_nch_read() in all readers: mlx5e RX/TX queue stats, mlx5e_get_base_stats(), ethtool channels stats, IPoIB stats, the sw_stats fold and the HV VHCA stats agent. | Aug 15, 2026 |
| CVE-2026-72340(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net: microchip: vcap: fix races on the shared Super VCAP block The VCAP instances on a chip are not independent, yet they are locked independently. On sparx5 and lan969x the IS0 and IS2 instances are backed by the same Super VCAP hardware block and share its cache and command registers: every access drives the shared VCAP_SUPER_CTRL register and moves data through the shared cache registers. Accessing one instance therefore races with accessing another. The per-instance admin->lock cannot prevent this, as each instance takes a different lock. The locking issue is mostly disguised by the fact that the core usage of the vcap api runs under rtnl. However, the full rule dump in debugfs decodes rules straight from hardware (a READ command followed by a cache read) and runs outside rtnl, so it races a concurrent tc-flower rule write to another Super VCAP instance. Besides corrupting the dump, the read repopulates the shared cache between the writers cache fill and its write command, so the writer commits the wrong data and corrupts the hardware entry. Introduce vcap_lock() and vcap_unlock() helpers and route every rule lock site in the VCAP API and its debugfs code through them. Replace the per-instance admin->lock with a single mutex in struct vcap_control that serializes access to all instances. The helpers reach it through a new admin->vctrl back-pointer, and the clients initialise and destroy the control lock instead of a per-instance one. No path holds more than one instance lock, so collapsing them onto a single mutex cannot self-deadlock. | Aug 15, 2026 |
| CVE-2026-72339(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: qede: fix off-by-one in BD ring consumption on build_skb failure qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a NULL return from qede_build_skb(). When it returns NULL under memory pressure, the functions still consume a BD from the ring before returning NULL. The callers then recycle additional BDs, resulting in one extra BD being consumed (off-by-one). This desynchronizes the BD ring, which can corrupt DMA page reference counts and lead to SLUB freelist corruption. Commit 4e910dbe3650 ("qede: confirm skb is allocated before using") added a NULL check inside qede_build_skb() to prevent a NULL pointer dereference, but did not address the missing NULL checks in the callers, making this off-by-one reachable. Fix this by adding NULL checks for the return value of qede_build_skb() in both qede_rx_build_skb() and qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring manipulation. | Aug 15, 2026 |
| CVE-2026-72338(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_pedit: fix TOCTOU heap OOB write in tc offload There is a TOCTOU race condition in flower lockless approach between sizing a flow_rule buffer and filling it. zdi-disclosures@trendmicro.com reports: The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED (fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the independent locking domains make the race reachable in practice. KASAN confirms: BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930 Write of size 4 at addr ffff888001f27520 by task poc-toctou/312 The buggy address is located 0 bytes to the right of allocated 288-byte region [ffff888001f27400, ffff888001f27520) (cache kmalloc-512) Note: The result is a heap OOB write attacker-controlled content into the adjacent slab object (requires CAP_NET_ADMIN). The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys(). Additionally we close the remaining TOCTOU window between the sizing read and the fill reads by more careful accounting. Rather than silently truncating the key count, which leads to incorrect action semantics offloaded to hardware and secondary OOB writes if the remaining capacity is zero or consumed by prior actions, we enforce remaining capacity checks and return -ENOSPC if the required space exceeds the remaining capacity. | Aug 15, 2026 |
| CVE-2026-72337(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: avoid untracked enable work lowpan_enable_set() allocates a temporary work item and schedules do_enable_set() on system_wq, then returns to debugfs. The debugfs active operation has ended at that point, but the worker still executes module text and manipulates enable_6lowpan and listen_chan. bt_6lowpan_exit() removes the debugfs files and immediately closes and puts listen_chan. It has no pointer to the queued work item, so it cannot cancel or flush it before tearing down the state that the worker uses. The buggy scenario involves two paths, with each column showing the order within that path: debugfs enable write module exit 1. lowpan_enable_set() allocates 1. bt_6lowpan_exit() removes set_enable work the debugfs file 2. schedule_work() queues 2. bt_6lowpan_exit() closes do_enable_set() and puts listen_chan 3. the write operation returns 3. module teardown can continue 4. do_enable_set() later runs against stale state Run the enable state transition synchronously in lowpan_enable_set() instead. The simple debugfs setter can sleep, and this file already handles the 6LoWPAN control write synchronously under the same set_lock. Once the setter returns, debugfs removal covers the whole operation and exit can no longer race with an untracked work item. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in do_enable_set+0x113/0x2e0 Workqueue: events do_enable_set [bluetooth_6lowpan] The buggy address belongs to the object at ffff888109cb8000 | Aug 15, 2026 |
| CVE-2026-72336(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: hold L2CAP conn across debugfs control get_l2cap_conn() looks up an LE hci_conn under hdev protection, but then drops that protection before reading hcon->l2cap_data and before lowpan_control_write() later dereferences conn->hcon. A disconnect or device close can tear down the same L2CAP connection in that window. The buggy scenario involves two paths, with each column showing the order within that path: 6LoWPAN control write: HCI disconnect/device close: 1. get_l2cap_conn() finds hcon 1. hci_disconn_cfm() dispatches and hcon->l2cap_data. the L2CAP disconnect callback. 2. get_l2cap_conn() drops hdev 2. l2cap_conn_del() clears protection and returns conn. hcon->l2cap_data and drops the L2CAP connection reference. 3. lowpan_control_write() reads 3. hci_conn_del() removes and drops conn->hcon. the HCI connection. Take a reference to the L2CAP connection with l2cap_conn_hold_unless_zero() while hdev is still locked, and drop that reference after the debugfs command's last use of conn. This mirrors the existing L2CAP ACL receive-side handoff and keeps the connection dereferenceable after leaving hdev protection. Export the existing helper so the bluetooth_6lowpan module can use the same lifetime primitive. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in lowpan_control_write+0x374/0x520 The buggy address belongs to the object at ffff888111b9d000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of freed 1024-byte region [ffff888111b9d000, ffff888111b9d400) Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 lowpan_control_write+0x374/0x520 (net/bluetooth/6lowpan.c:1131) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 __debugfs_file_get+0xf7/0x400 full_proxy_write+0x9e/0xd0 vfs_write+0x1b0/0x810 ksys_write+0xd2/0x170 dnotify_flush+0x32/0x220 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 l2cap_conn_add+0x45/0x520 l2cap_chan_connect+0xac6/0xd90 l2cap_sock_connect+0x216/0x350 __sys_connect+0x101/0x130 __x64_sys_connect+0x40/0x50 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 hci_conn_hash_flush+0xc0/0x140 hci_dev_close_sync+0x41a/0xb00 hci_dev_close+0x12f/0x160 hci_sock_ioctl+0x157/0x570 sock_do_ioctl+0xf7/0x210 sock_ioctl+0x32f/0x490 __x64_sys_ioctl+0xc7/0x110 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f kasan_record_aux_stack+0xa7/0xc0 insert_work+0x32/0x100 __queue_work+0x262/0xa60 queue_work_on+0xad/0xb0 l2cap_connect_cfm+0x4ef/0x670 hci_le_remote_feat_complete_evt+0x247/0x430 hci_event_packet+0x360/0x6f0 hci_rx_work+0x2ae/0x7a0 process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 | Aug 15, 2026 |
| CVE-2026-72335(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix adv monitor add failure cleanup hci_add_adv_monitor() publishes a new adv_monitor in hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT offload add path can then fail either locally before the controller add command completes, or in the MSFT add callback. In the current queued management add flow, hci_cmd_sync_work() still invokes mgmt_add_adv_patterns_monitor_complete() with the original pending command after msft_add_monitor_pattern() returns. The buggy scenario involves two paths, with each column showing the order within that path: MSFT add handling MGMT completion 1. insert monitor and handle 1. receive sync error 2. send MSFT add command 2. call add-monitor completion 3. callback sees bad response 3. load cmd->user_data 4. callback frees monitor 4. read monitor->handle Local MSFT setup failures have the other half of the same ownership bug: they return an error after the IDR insertion, but no later code removes the failed monitor from the IDR. Keep ownership with the pending management command until its completion. For normal management adds, the MSFT add callback now records successful controller state and returns errors to its caller. The management completion frees the monitor on non-success after copying the response handle, while resume/reregister callback-error cleanup remains in the MSFT callback. The success path keeps the existing bookkeeping. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x19f/0x330 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] kasan_report+0xe0/0x110 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? 0xffffffffc00d00da ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? hci_cmd_sync_work+0x1ab/0x210 [bluetooth] hci_cmd_sync_work+0x1c0/0x210 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] process_one_work+0x4fd/0xbc0 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 471 on cpu 3 at 285.205389s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] __sys_sendto+0x2bc/0x2d0 __x64_sys_sendto+0x76/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 454 on cpu 2 at 285.217112s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 msft_add_monitor_sync+0x54a/0x570 [bluetooth] hci_add_adv_monitor+0x133/0x180 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 | Aug 15, 2026 |
| CVE-2026-72334(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix malformed ISO_END/CONT handling Core specification (Part C vol 4 sec 5.4.5) does not exclude empty ISO_CONT, ISO_END packets. We currently reject them if they are last. If controller sends malformed sequence ISO_START -> rx_len = 4, ISO_CONT skb->len 4, ISO_START that ends payload in ISO_CONT, we leak conn->rx_skb. If controller sends too long ISO_END, we panic on skb_put. If controller sends too short ISO_END we accept it. Fix by marking unfinished ISO_START via conn->rx_skb != NULL. Check skb->len properly before skb_put. Combine the ISO_CONT/END code paths as they require the same initial checks. Reject too short ISO_END packets. | Aug 15, 2026 |
| CVE-2026-72333(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix tx ident leak for commands without a response Commit 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident") changed ident allocation to use an IDA, releasing idents in l2cap_put_ident() when the matching response command is received. But identifiers allocated for commands that have no response defined are never released. In particular L2CAP_LE_CREDITS is sent repeatedly for the lifetime of an LE CoC channel, so a peer streaming data to the host exhausts the 1-255 ident range after 254 credit packets. From then on l2cap_get_ident() fails: kernel: Bluetooth: Unable to allocate ident: -28 and every subsequent L2CAP_LE_CREDITS packet is sent with ident 0, which is invalid (Core Spec, Vol 3, Part A, Section 4: "Signaling identifier 0x00 is an invalid identifier and shall never be used in any command"). Remote stacks that validate the ident drop these commands, never receive new credits, and the channel stalls permanently. With default socket buffers this happens after roughly 0.5 MB of received data (the exact amount depends on the socket receive buffer): < ACL Data TX: Handle 2048 flags 0x00 dlen 12 LE L2CAP: LE Flow Control Credit (0x16) ident 0 len 4 Source CID: 64 Credits: 1 Release the ident immediately after sending L2CAP_LE_CREDITS since no response will ever release it. Use a local variable instead of chan->ident so that an ident that an EXT_FLOWCTL channel may be waiting on (e.g. a pending reconfigure) is not overwritten by a credit packet. Also add the missing L2CAP_LE_CONN_RSP case to l2cap_put_ident() so idents allocated for outgoing L2CAP_LE_CONN_REQ commands are released when the response arrives. | Aug 15, 2026 |
| CVE-2026-72332(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Prevent PM resume deadlock in hwctx_sync_debug_bo() amdxdna_hwctx_sync_debug_bo() invokes the hardware hwctx_sync_debug_bo() callback while holding xdna->dev_lock. The callback may call amdxdna_cmd_submit(), which in turn calls amdxdna_pm_resume_get(). If the device is suspended, amdxdna_pm_resume_get() may synchronously execute amdxdna_pm_resume(), which also acquires xdna->dev_lock, resulting in a deadlock. Avoid the deadlock by calling amdxdna_pm_resume_get() before holding xdna->dev_lock in both amdxdna_hwctx_sync_debug_bo() and amdxdna_drm_config_hwctx_ioctl() | Aug 15, 2026 |
| CVE-2026-72331(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix VMA access race aie2_populate_range() and amdxdna_umap_release() access a saved VMA pointer that may have already been freed, leading to a potential use-after-free. Remove the VMA accesses from these functions to avoid the race. | Aug 15, 2026 |
| CVE-2026-72330(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: net/tls: Consume empty data records in tls_sw_read_sock() A peer may send a zero-length TLS application_data record; TLS 1.3 explicitly permits these as a traffic-analysis countermeasure (RFC 8446, Section 5.1). After decryption such a record has full_len == 0. tls_sw_read_sock() hands it to the read_actor, which has no payload to consume and returns zero. The loop treats a zero return as backpressure (used <= 0), requeues the skb at the head of rx_list, and stops. rx_list is serviced head-first on the next call, so the empty record is dequeued, fails the same way, and is requeued again; every later record on the connection is blocked behind it. tls_sw_recvmsg() does not stall on this: a zero-length data record copies nothing and falls through to consume_skb(). Mirror that in the read_sock() path by recognizing an empty data record before the actor runs, consuming it, and continuing. | Aug 15, 2026 |
| CVE-2026-72329(opens NVD record) | Critical | 9.3 | In the Linux kernel, the following vulnerability has been resolved: net/liquidio: drop cached VF pci_dev LUT The PF SR-IOV enable path caches VF pci_dev pointers in dpiring_to_vfpcidev_lut[] by iterating with pci_get_device(). Those entries do not own a reference, because the iterator drops the previous device reference on each step. The cached pointer is then dereferenced later when handling OCTEON_VF_FLR_REQUEST. Replace the cached VF mapping with runtime lookup on the mailbox DPI ring: derive the VF index from q_no, resolve the VF via exported PCI IOV helpers, validate it with the PF pointer and VF ID, then issue pcie_flr() and drop the reference with pci_dev_put(). Remove the unused VF lookup table initialization and cleanup. | Aug 15, 2026 |
| CVE-2026-72328(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix potential amdxdna_umap lifetime race amdxdna_umap_release() calls the blocking mmu_interval_notifier_remove() before removing the object from abo->mem.umap_list. If aie2_populate_range() runs concurrently, it may obtain a reference to an amdxdna_umap that is being released, leading to a potential use-after-free. Use kref_get_unless_zero() in aie2_populate_range() when acquiring a reference. If the reference count has already dropped to zero, release is in progress and the entry is skipped. | Aug 15, 2026 |
| CVE-2026-72327(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Reject invalid indirect BO handle in indirect CSD setup v3d_get_cpu_indirect_csd_params() looks up the indirect buffer object from a userspace-supplied handle but never checks the result. A bogus or stale handle makes drm_gem_object_lookup() return NULL, which is then stored in info->indirect and only dereferenced later when the indirect CSD job runs, turning a userspace mistake into a NULL pointer dereference in the kernel. Bail out with -ENOENT as soon as the lookup fails, so the bad handle is rejected at submission time. | Aug 15, 2026 |
| CVE-2026-72326(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: net/sched: cake: reject overhead values that underflow length CAKE accepts signed overhead values and stores them in an s16, but the adjusted packet length calculation uses unsigned arithmetic. A negative effective length can therefore wrap to a large value. Such configurations make rate accounting depend on integer wraparound rather than on the packet size userspace intended to model. A static netlink lower bound is not enough because packets reaching CAKE can be smaller than any reasonable manual-overhead allowance. Fold the signed overhead adjustment into the existing datapath MPU clamp so negative adjusted lengths are clamped before link-layer framing adjustments. | Aug 15, 2026 |
| CVE-2026-72325(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/core: Avoid enabling BRS from the SVM reload path Branch Sampling (BRS) and Last Branch Record (LBR) are mutually exclusive hardware features, and users of both are tracked via cpuc->lbr_users. When SVM is toggled on a CPU, the host perf events are reprogrammed to update the HostOnly filter bit (set when virtualization is enabled, cleared when it is disabled). On PerfMonV2-capable processors, this reprogramming is performed by calling amd_pmu_enable_all() to rewrite the event selectors. However, amd_pmu_enable_all() also calls amd_brs_enable_all(), which enables BRS whenever cpuc->lbr_users > 0. Having active LBR events satisfies this gating on processors that have LBR but not BRS. The kernel then tries to set the BRS enable bit in DebugExtnCfg (MSR 0xc000010f). Since that bit is deprecated on such hardware, the write results in a #GP: Call Trace: <IRQ> amd_pmu_enable_all+0x1d/0x90 amd_pmu_disable_virt+0x62/0xb0 kvm_arch_disable_virtualization_cpu+0xa/0x40 [kvm] hardware_disable_nolock+0x1a/0x30 [kvm] __flush_smp_call_function_queue+0x9b/0x410 __sysvec_call_function+0x18/0xc0 sysvec_call_function+0x69/0x90 </IRQ> <TASK> asm_sysvec_call_function+0x16/0x20 RIP: 0010:cpuidle_enter_state+0xc4/0x450 ? cpuidle_enter_state+0xb7/0x450 cpuidle_enter+0x29/0x40 cpuidle_idle_call+0xf5/0x160 do_idle+0x7b/0xe0 cpu_startup_entry+0x26/0x30 start_secondary+0x115/0x140 secondary_startup_64_no_verify+0x194/0x19b </TASK> Fix this by ensuring that BRS is not enabled from the event selector reprogramming path even when cpuc->lbr_users > 0. | Aug 15, 2026 |
| CVE-2026-72324(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: gpio: mvebu: free generic chips on unbind irq_alloc_domain_generic_chips() allocates generic chip data that must be freed via irq_domain_remove_generic_chips(). The devres action mvebu_gpio_remove_irq_domain() only called irq_domain_remove(), which only frees the generic chips if IRQ_DOMAIN_FLAG_DESTROY_GC is set. Call irq_domain_remove_generic_chips() explicitly before irq_domain_remove() instead. | Aug 15, 2026 |