Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
36,740 matching · page 135/735Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-72473(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Decouple req recycling from RPC completion rl_kref formerly served two distinct lifetimes through a single refcount: it gated when a Reply could wake its RPC task, and it gated when an rpcrdma_req could return to its free pool. The marshal path took the Send-side reference only when SGEs needed DMA-unmap (sc_unmap_count > 0), which made a Send carrying only pre-registered buffers an exception: the Reply handler dropped rl_kref from 1 to 0 and freed the req while the HCA might still be DMA-reading from its send buffer. Give rl_kref a narrower job. The RPC layer takes one reference when slot allocation hands a req out. rpcrdma_prepare_send_sges() takes a Send-side reference unconditionally after WR preparation succeeds. xprt_rdma_free_slot() and xprt_rdma_bc_free_rqst() drop the RPC-layer reference; rpcrdma_sendctx_unmap() drops the Send-side reference. The req returns to its free pool only after both owners have signed off. The existing kref_init(&req->rl_kref) call in rpcrdma_prepare_send_sges() is removed. Initialization moves to the slot-allocation paths (xprt_rdma_alloc_slot and rpcrdma_bc_rqst_get), and the release callback re-arms rl_kref before the req returns to a free pool. A re-init in the marshal path would discard the RPC-layer reference that already exists on entry. Three invariants follow: - Any rpcrdma_req held by an rpc_rqst has rl_kref >= 1. xprt_rdma_alloc_slot(), rpcrdma_bc_rqst_get(), and the backlog-wake branch in xprt_rdma_alloc_slot() each kref_init rl_kref before publishing the req. Without this invariant, an RPC task that aborts between slot allocation and marshal (gss_refresh failure or signal during call_connect, for example) would drive xprt_release() -> xprt_rdma_free_slot() -> kref_put against a refcount of zero, saturating refcount_t and stranding the slot. - The Send-side reference is taken only after WR prep succeeds. A mapping failure in rpcrdma_prepare_send_sges() runs rpcrdma_sendctx_cancel(), which DMA-unmaps the sendctx and clears sc_req without touching rl_kref. The sendctx ring walks in rpcrdma_sendctx_put_locked() and rpcrdma_sendctxs_destroy() skip entries with sc_req == NULL, so a burst of -EIO marshal failures cannot hold reqs off rb_send_bufs. - The release callback re-arms rl_kref so the next consumer enters with the invariant satisfied. Replies now complete the RPC directly. rpcrdma_reply_handler() calls rpcrdma_complete_rqst() in place of kref_put on the non-LocalInv branch. The LocalInv branch already completes the RPC from frwr_unmap_async() and is unaffected. Because Send-side references can now outlive RPC completion, connection teardown drains sendctx entries whose unsignaled Sends never had a later signaled completion to walk the ring. rpcrdma_sendctxs_destroy() walks the active range and runs rpcrdma_sendctx_unmap() on each entry with a non-NULL sc_req before the request buffers are reset, and is moved ahead of rpcrdma_reqs_reset() in rpcrdma_xprt_disconnect() so the reqs are still in their pre-reset state when the Send-side refs are released. The drain creates a teardown-ordering hazard on the backchannel path. With the new lifetime, releasing a bc_prealloc req from rpcrdma_req_release() re-adds it to bc_pa_list. The disconnect in xprt_rdma_destroy() runs after xprt_destroy_backchannel() has already emptied bc_pa_list, so the drained reqs would otherwise leak. xprt_rdma_destroy() now runs xprt_rdma_bc_destroy(xprt, 0) a second time after the disconnect to reclaim them. | Aug 15, 2026 |
| CVE-2026-72472(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: nfs: use nfsi->rwsem to protect traversal of the file lock list Lingfeng identified a bug and suggested two solutions, but both appear to have issues. Generally, we cannot release flc_lock while iterating over the file lock list to avoid use-after-free (UAF) problems with file locks. However, functions like nfs_delegation_claim_locks and nfs4_reclaim_locks cannot adhere to this rule because recover_lock or nfs4_lock_delegation_recall may take a long time. To resolve this, NFS switches to using nfsi->rwsem for the same protection, and nfs_reclaim_locks follows this approach. Although nfs_delegation_claim_locks uses so_delegreturn_mutex instead, this is inadequate since a single inode can have multiple nfs4_state instances. Therefore, the fix is to also use nfsi->rwsem in this case. Furthermore, after commit c69899a17ca4 ("NFSv4: Update of VFS byte range lock must be atomic with the stateid update"), the functions nfs4_locku_done and nfs4_lock_done also break this rule because they call locks_lock_inode_wait without holding nfsi->rwsem. Simply adding this protection could cause many deadlocks, so instead, the call to locks_lock_inode_wait is moved into _nfs4_proc_setlk. Regarding the bug fixed by commit c69899a17ca4 ("NFSv4: Update of VFS byte range lock must be atomic with the stateid update"), it has been resolved after commit 0460253913e5 ("NFSv4: nfs4_do_open() is incorrectly triggering state recovery") because all slots are drained before calling nfs4_do_reclaim, which prevents concurrent stateid changes along this path. Also, nfs_delegation_claim_locks does not cause this concurrency either since when _nfs4_proc_setlk is called with NFS_DELEGATED_STATE, no RPC is sent, so nfs4_lock_done is not called. Therefore, nfs4_lock_delegation_recall from nfs_delegation_claim_locks is the first time the stateid is set. | Aug 15, 2026 |
| CVE-2026-72471(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: prevent potential lcn remains uninitialized The target VCN being sought was not found within runs[0], causing run_lookup() to return false. This causes run_lookup_entry() to return false, which in turn results in a len value of 0, and the new parameter passed to attr_data_get_block() is NULL. Collectively, these factors ultimately cause attr_data_get_block_locked() to exit prematurely without initializing lcn, thereby triggering [1]. To prevent [1], the clen check within ni_seek_data_or_hole() has been moved to occur before the lcn check. [1] BUG: KMSAN: uninit-value in ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862 ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862 ntfs_llseek+0x22a/0x4a0 fs/ntfs3/file.c:1530 vfs_llseek fs/read_write.c:391 [inline] | Aug 15, 2026 |
| CVE-2026-72470(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: resize log->one_page_buf when adopting on-disk page size log_replay() allocates log->one_page_buf using the page size that was chosen from the host PAGE_SIZE: log->one_page_buf = kmalloc(log->page_size, GFP_NOFS); Later, when a restart area is found, the log page size recorded on disk is adopted: t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size); if (log->page_size != t32) { log->l_size = log->orig_file_size; log->page_size = norm_file_page(t32, &log->l_size, t32 == DefaultLogPageSize); } If the on-disk page size is larger than the size used for the initial allocation, log->page_size grows but one_page_buf is left at its original, smaller size. A subsequent unaligned read_log_page() then reads log->page_size bytes into the undersized scratch buffer: page_buf = page_off ? log->one_page_buf : *buffer; err = ntfs_read_run_nb_ra(ni->mi.sbi, &ni->file.run, page_vbo, page_buf, log->page_size, NULL, &log->read_ahead); overflowing the allocation. This is reachable when mounting a dirty NTFS volume whose log was formatted with a page size larger than the buffer initially allocated on the mounting host (for example a 64K-log volume mounted on a host that allocated a 4K scratch buffer). Grow one_page_buf when the adopted on-disk page size exceeds the size used for the initial allocation. On krealloc() failure the original buffer is left intact and freed by the existing error path. | Aug 15, 2026 |
| CVE-2026-72469(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix ep kref imbalance on ADDR_CHANGE rpcrdma_cm_event_handler() falls through to the disconnected: label on RDMA_CM_EVENT_ADDR_CHANGE and calls rpcrdma_ep_put() with no matching get when the event arrives before RDMA_CM_EVENT_ESTABLISHED. The kref then underflows during connect teardown and rpcrdma_xprt_disconnect() operates on a freed ep. Reference counts across a normal connection lifecycle: rpcrdma_ep_create() kref_init ->1 rpcrdma_xprt_connect() ep_get ->2 (before post_recvs) RDMA_CM_EVENT_ESTABLISHED ep_get ->3 RDMA_CM_EVENT_DISCONNECTED ep_put ->2 rpcrdma_xprt_drain() ep_put ->1 rpcrdma_xprt_disconnect() tail ep_put ->0 (ep_destroy) The connect-time get in rpcrdma_xprt_connect(), taken just before rpcrdma_post_recvs() "while there are outstanding Receives," is balanced by rpcrdma_xprt_drain. ADDR_CHANGE before ESTABLISHED has no get to consume, so its put drops the count to 1 and the drain put then frees the ep while rpcrdma_xprt_disconnect() still holds a pointer to it. Fix by dispatching on the prior re_connect_status via xchg(): for prev == 0 (pre-ESTABLISHED) wake the connect waiter and return with no put; for prev == 1 call rpcrdma_force_disconnect() and return. The case-1 arm relies on the subsequent RDMA_CM_EVENT_DISCONNECTED event -- reliably delivered when rdma_disconnect() is called on a still-connected cm_id -- to balance the ESTABLISHED get; rpcrdma_xprt_drain() continues to balance only that connect-time get. Any other prior value means teardown is already in flight. | Aug 15, 2026 |
| CVE-2026-72468(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Initialize re_id before removal registration rpcrdma_create_id() registers ep->re_rn with the rpcrdma ib_client before returning the new rdma_cm_id to rpcrdma_ep_create(). However rpcrdma_ep_create() currently stores that pointer in ep->re_id only after rpcrdma_create_id() returns. A local administrator can race an NFS/RDMA mount against RDMA device removal. If rpcrdma_remove_one() observes the just-registered notification before rpcrdma_ep_create() assigns ep->re_id, rpcrdma_ep_removal_done() calls trace_xprtrdma_device_removal(NULL). The tracepoint dereferences id->device->name and copies id->route.addr.dst_addr, so the callback can crash the kernel with a NULL pointer dereference. Store the rdma_cm_id in ep->re_id immediately before publishing ep->re_rn. The existing error path still destroys the id directly if registration fails; ep is then freed by the caller without using ep->re_id. Remove the later duplicate assignment in rpcrdma_ep_create(). | Aug 15, 2026 |
| CVE-2026-72467(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Check frwr_wp_create() during connect frwr_wp_create() creates the singleton Memory Region used to encode padding for Write chunks whose payload length is not XDR-aligned. Its failure paths return a negative errno and leave ep->re_write_pad_mr set to NULL. rpcrdma_xprt_connect() currently ignores that return value. If frwr_wp_create() fails after the rest of the connection setup succeeds, xprt_rdma_connect_worker() treats the connection attempt as successful and sets XPRT_CONNECTED. A later NFS/RDMA read with a non-4-byte-aligned receive page length reaches rpcrdma_encode_write_list(), passes the NULL write-pad MR to encode_rdma_segment(), and dereferences it. This is locally triggerable on an NFS/RDMA client after a connect or reconnect hits a local MR allocation, DMA-map, MR-map, or post-send failure; a remote peer alone cannot force the local MR setup failure. Check the return value and fail the connect as -ENOTCONN, matching the adjacent setup failures. This keeps XPRT_CONNECTED clear and lets the normal reconnect path retry. | Aug 15, 2026 |
| CVE-2026-72466(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix bcall rep leak and unbounded peek rpcrdma_is_bcall() decodes a reply's first words to decide whether the frame is a backchannel call. Two issues in that decode path let a short or malformed reply leak the receive buffer and drain the Receive queue. First, the speculative peek p = xdr_inline_decode(xdr, 0); /* five p++ reads follow */ asks xdr_inline_decode() for zero bytes, which returns xdr->p without consulting xdr->end. The five subsequent __be32 reads can then walk up to 20 bytes past the wire payload into stale regbuf contents and misclassify the reply as a backchannel call. Second, after the post-peek p = xdr_inline_decode(xdr, 3 * sizeof(*p)); if (unlikely(!p)) return true; the short-header arm returns true without calling rpcrdma_bc_receive_call(). The contract with the caller is that a true return transfers ownership of rep to the backchannel path: rpcrdma_reply_handler() if (rpcrdma_is_bcall(r_xprt, rep)) return; /* bare return, skips out_post */ ... out_post: rpcrdma_post_recvs(r_xprt, credits + ...); Because rpcrdma_bc_receive_call() never ran, no one took rep, but rpcrdma_reply_handler still bare-returns past rpcrdma_rep_put() and rpcrdma_post_recvs(). The rep, with its persistently DMA-mapped receive buffer, is orphaned on rb_all_reps and freed only at transport teardown. This completion reposts nothing, so its slot is reclaimed only when a later forward-channel reply reaches out_post and rpcrdma_post_recvs() allocates a fresh rep to backfill; absent that traffic the Receive queue drains and the peer's Sends draw RNR NAKs. Fix by consulting xdr->end after the zero-length peek so the five __be32 reads cannot run unless 20 bytes of wire payload remain. A byte-precise comparison against xdr->end is required because a non-4-aligned receive rounds the stream's word count up past the true payload. Also return false from the short-header arm so the reply falls through the normal out_norqst cleanup chain (rpcrdma_rep_put() plus rpcrdma_post_recvs()). | Aug 15, 2026 |
| CVE-2026-72465(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Sanitize the reply credit grant after parsing The out_norqst exit in rpcrdma_reply_handler() branches away before the credit clamp, so a reply that matches no pending request reaches out_post carrying the raw credit value parsed from the wire. rpcrdma_post_recvs() does not bound its @needed argument: the refill loop allocates and chains Receive WRs until the count is satisfied or allocation fails. A peer that sends a well-formed reply carrying an unknown XID and an inflated credit grant therefore drives rep allocation and Receive posting past re_max_requests on every such reply. Move the clamp to immediately after the credit field is parsed, ahead of the first branch that can reach out_post, so every later consumer sees a sanitized value. The cwnd update stays on the matched-request path. | Aug 15, 2026 |
| CVE-2026-72464(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Repost Receive buffers for malformed replies rpcrdma_wc_receive() decrements the transport's Receive count for every completion before it dispatches a successful Receive to rpcrdma_reply_handler(). The handler must post a replacement Receive WR before returning unless ownership of the rep has moved elsewhere, as on the backchannel path. Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") moved the Receive refill out of rpcrdma_wc_receive(), where it had run ahead of every reply, into rpcrdma_reply_handler() so that the responder's credit grant could be parsed before reposting. The bad-version and short-reply exits never reach that refill: they recycle the rep and return without calling rpcrdma_post_recvs(). A remote peer can therefore drain the client's posted Receive queue by sending a sustained stream of replies that are shorter than the fixed transport header or that carry an unrecognized RPC/RDMA version. Each such reply consumes one posted Receive without replacing it. Once the queue empties, the peer's next Send finds no posted Receive and the transport stalls until reconnect. Route both malformed-reply exits through the shared repost tail after recycling the rep, refilling against buf->rb_credits, the most recent accepted credit grant. Neither exit updates the congestion window, so RPCs admitted under the previous grant remain in flight awaiting replies. A smaller refill target would let a stream of malformed replies ratchet the posted Receive count down to the batch floor while the congestion window still admits rb_credits RPCs; a burst of valid replies to those RPCs could then overrun the posted Receives, and because the client connects with rnr_retry_count of zero, a single RNR NAK terminates the connection. Refilling against rb_credits also restores the target that applied to malformed replies before commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") when rpcrdma_post_recvs() computed it from rb_credits internally. rb_credits is at least one from connection establishment onward, so the repost path always keeps Receives posted. | Aug 15, 2026 |
| CVE-2026-72463(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix dev use-after-free in xfrm async resumption xfrm async resumption hold skb->dev refcnt until after transport_finish. However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking device reference, such as vti_rcv_cb. The subsequent async resumption will decrement the tunnel device's reference count, which lead to uaf of tunnel dev and refcnt leak of orig dev as below: unregister_netdevice: waiting for vti1 to become free. Usage count = -2 Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set by xfrm_rcv_cb can race with device teardown. Extend rcu protection over xfrm_rcv_cb and transport_finish to prevent races. | Aug 15, 2026 |
| CVE-2026-72462(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: apparmor: fix race in unix socket mediation when peer_path is used The holding a reference to the peer_sk is not enough to ensure access to the peer sk path. Accessing the path outside of the state lock allows for a race with unix_release_sock(). Fix this by taking the state lock and getting a reference to the path under lock. Ideally for connected sockets we would cache this information so we don't have to take the lock here. But for now just fix the race. | Aug 15, 2026 |
| CVE-2026-72461(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: apparmor: fix refcount leak when updating the sk_ctx Currently update_sk_ctx() transfers the plabel reference, unfortunately it is also unconditionally put in the caller. Ideally we would make the caller conditionally put the reference based on whether it was transferred but for now just fix the bug by getting a reference. | Aug 15, 2026 |
| CVE-2026-72460(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: apparmor: check label build before no_new_privs test aa_change_profile() builds a replacement label with fn_label_build_in_scope() before the no_new_privs subset check. The build helper can fail and return NULL or an ERR_PTR, but the result was passed to aa_label_is_unconfined_subset() before the existing IS_ERR_OR_NULL() check. Reuse the existing target-label build failure handling immediately after the build. This preserves the current audit handling while preventing the subset helper from dereferencing an invalid label. | Aug 15, 2026 |
| CVE-2026-72459(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: apparmor: aa_label_alloc use aa_label_free on alloc failure aa_label_alloc() allocates a secid before allocating or taking the label proxy. If the later proxy step fails, the error path only freed the label memory, leaking any resources initialized by aa_label_init(). Use aa_label_free() on the failure path so partially initialized labels release their secid and other label resources before the backing memory is freed. | Aug 15, 2026 |
| CVE-2026-72458(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL pointer dereference in unpack_pdb pdb->dfa could be NULL if unpack_dfa fails, causing a NULL pointer dereference. | Aug 15, 2026 |
| CVE-2026-72457(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: apparmor: fail policy unpack on accept2 allocation failure unpack_pdb() may need to allocate a missing ACCEPT2 table for older policy data. If that allocation failed, it set an error message but jumped to the success path, returning a policydb with the required table missing. Return -ENOMEM through the normal failure path when the ACCEPT2 allocation fails. Remove the now-unused out label. | Aug 15, 2026 |
| CVE-2026-72456(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: apparmor: release exe file resources on path failure get_current_exe_path() takes both an exe_file reference and a path reference before resolving the path name. If aa_path_name() failed, it returned immediately and leaked both references. Route the failure through the common cleanup path so fput() and path_put() always run after the references are acquired. | Aug 15, 2026 |
| CVE-2026-72455(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: apparmor: fix uninitialised pointer passed to audit_log_untrustedstring() Commit 4a134723f9f1 ("apparmor: move check for aa_null file to cover all cases") intrdouced a small bug, where path_name() may pass a potentially uninitialized *name to aa_audit_file() if the path->dentry had been replaced with aa_null.dentry earlier on. This can lead to page fault like one observed on 7.0.2 openSUSE Tumbleweed kernel: [51692.242756] [ T24690] BUG: unable to handle page fault for address: 0000000f00000003 [51692.242762] [ T24690] #PF: supervisor read access in kernel mode [51692.242763] [ T24690] #PF: error_code(0x0000) - not-present page [51692.242765] [ T24690] PGD 0 P4D 0 [51692.242768] [ T24690] Oops: Oops: 0000 [#1] SMP NOPTI [51692.242772] [ T24690] CPU: 3 UID: 1020 PID: 24690 Comm: snap-confine Tainted: G O 7.0.2-1-default #1 PREEMPT(full) openSUSE Tumbleweed ab90b4c9940707f9cafa19bdad80b2cec52dbe51 [51692.242775] [ T24690] Tainted: [O]=OOT_MODULE [51692.242777] [ T24690] Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP05, BIOS 03.18 01/08/2026 [51692.242778] [ T24690] RIP: 0010:strlen+0x4/0x30 [51692.242783] [ T24690] Code: f7 75 ec 31 c0 e9 17 9f 00 ff 48 89 f8 e9 0f 9f 00 ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 18 48 89 f8 0f 1f 40 00 48 83 c0 01 80 38 00 75 f7 48 [51692.242785] [ T24690] RSP: 0018:ffffd015eb1e3608 EFLAGS: 00010282 [51692.242787] [ T24690] RAX: 0000000000000000 RBX: ffff89796198a360 RCX: 0000000000000000 [51692.242788] [ T24690] RDX: 00000000000000d1 RSI: 0000000f00000003 RDI: 0000000f00000003 [51692.242790] [ T24690] RBP: ffffffffb7ede090 R08: 00000000000005f5 R09: 0000000000000000 [51692.242791] [ T24690] R10: 0000000000000000 R11: 0000000000000000 R12: ffffd015eb1e3700 [51692.242792] [ T24690] R13: ffff8977a22bc380 R14: ffffffffb7ec5190 R15: ffff8977a0c8aa80 [51692.242794] [ T24690] FS: 0000000000000000(0000) GS:ffff897f640d8000(0000) knlGS:0000000000000000 [51692.242796] [ T24690] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [51692.242797] [ T24690] CR2: 0000000f00000003 CR3: 00000006ad15f000 CR4: 0000000000f50ef0 [51692.242799] [ T24690] PKRU: 55555554 [51692.242800] [ T24690] Call Trace: [51692.242802] [ T24690] <TASK> [51692.242804] [ T24690] audit_log_untrustedstring+0x1d/0x40 [51692.242811] [ T24690] common_lsm_audit+0x71/0x1d0 [51692.242816] [ T24690] aa_audit+0x5a/0x170 [51692.242819] [ T24690] aa_audit_file+0x18a/0x1b0 [51692.242825] [ T24690] path_name+0xd2/0x100 [51692.242829] [ T24690] profile_path_perm.part.0+0x58/0xb0 [51692.242832] [ T24690] aa_path_perm+0xef/0x150 [51692.242837] [ T24690] apparmor_file_open+0x153/0x2e0 [51692.242840] [ T24690] security_file_open+0x46/0xd0 [51692.242844] [ T24690] do_dentry_open+0xe9/0x4d0 [51692.242848] [ T24690] vfs_open+0x30/0x100 While here, initialise variables which are passed down to path_name(). | Aug 15, 2026 |
| CVE-2026-72454(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev() i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ handler, which cannot take bus.lock. This allows concurrent device addition/removal in the I3C core to modify the list while it is being traversed, potentially leading to use-after-free or crashes. Remove the dependency on the bus device list and introduce a dedicated lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained under hci->lock. Update the array when IBIs are enabled or disabled, so that it always reflects the set of devices allowed to generate IBIs. Also update when IBIs are freed, to cover the corner case when an IBI is freed without first being disabled (e.g. oldedev in i3c_master_add_i3c_dev_locked()). Move i3c_hci_addr_to_dev() into core.c, reimplement it using the new array, and add a lockdep assertion to enforce that hci->lock is held by callers. Demote a message in PIO and DMA IBI handling, from an error to a debug message, because there is a race window when the condition can arise normally. | Aug 15, 2026 |
| CVE-2026-72453(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: regcache: Do not overwrite error code when finalizing cache after error During regcache initialization, if an error occurs in the cache_ops->populate callback, and if cache operations include an exit callback, the error code from populate() is overwritten with the return value from exit(). This hides the error condition from the caller of regcache_init(), and can cause NULL pointer dereferences when the regcache is later accessed. | Aug 15, 2026 |
| CVE-2026-72452(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/i915: clear CRTC color blob pointers after dropping refs intel_crtc_put_color_blobs() drops the CRTC color blob references, but leaves the corresponding pointers unchanged. This can matter in intel_crtc_prepare_cleared_state(), which frees the old CRTC hw state before calling intel_dp_tunnel_atomic_clear_stream_bw(). The latter can fail while looking up the DP tunnel group state, for example with -EDEADLK. If that happens, the function returns without completing the cleared state preparation. The failed atomic state will then be cleared by the atomic core and intel_crtc_free_hw_state() can be called again for the same state, dropping the same blob references again. Clear the blob pointers after dropping the references so repeated cleanup of the same CRTC hw state is safe. (cherry picked from commit d5005addb5f68e8a0edce249506757bdc9e3d8c8) | Aug 15, 2026 |
| CVE-2026-72451(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix xfrm state cache insertion race The xfrm input state cache insertion code checks the validity of the state before acquiring the global xfrm_state_lock. Thus it's possible for someone else to kill the state after it passed the validity check, and then the insertion will add the dead state to the cache. Fix this by moving the validity check inside the lock. This entire function is called on the input path, where BH must be off (e.g., the caller of this function xfrm_input acquires its spinlocks without disabling BH). So there is no need to disable BH here or take the RCU read lock. Remove both and replace them with an assertion that trips if BH is accidentally enabled on some future calling path. | Aug 15, 2026 |
| CVE-2026-72450(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: xfrm: validate selector family and prefixlen during match syzbot reported a shift-out-of-bounds in xfrm_selector_match() due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set). Fix this by: - Rejecting mismatched families in xfrm_selector_match. - Returning false in addr4_match if prefixlen > 32. - Returning false in addr_match if prefixlen > 128 (prevents overflow). | Aug 15, 2026 |
| CVE-2026-72449(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix list_del corruption in kfd_criu_resume_svm The cleanup tail of kfd_criu_resume_svm() walks svms->criu_svm_metadata_list and kfree()s each struct criu_svm_metadata without removing it from the list. The list head is left pointing at freed kmalloc-96 objects. A second AMDKFD_IOC_CRIU_OP from the same process re-enters: list_empty() reads the dangling ->next (use-after-free), the loop walks freed entries, and each is kfree()'d again (double-free). This is reachable by an unprivileged render-group user via /dev/kfd with no capabilities required. Add list_del() before the kfree() so the list is properly emptied. The list_for_each_entry_safe() iterator already caches the next pointer, so unlinking during the walk is safe. (cherry picked from commit 6322d278a298e2c1430b9d2697743d3a04b788b1) | Aug 15, 2026 |
| CVE-2026-72448(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix leak of SQ timestamp buffer on teardown The send-queue timestamp ring is allocated with qmem_alloc() when timestamping is used, but otx2_free_sq_res() never freed sq->timestamps, leaking that memory across ifdown and device removal. Add the missing qmem_free() alongside the other SQ companion buffers. | Aug 15, 2026 |
| CVE-2026-72447(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: sctp: hold socket lock when dumping endpoints in sctp_diag SCTP_DIAG endpoint dumping was traversing endpoint address lists without holding lock_sock(), while those lists could change concurrently via socket operations (e.g., bindx changes). This creates a race where nla_reserve() counts addresses under RCU protection, but the subsequent copy may see fewer entries, potentially leaking uninitialized memory to userspace. Fix this by: - Taking a reference on each endpoint during hash traversal - Moving socket operations (lock_sock()) outside read_lock_bh() - Serializing address list access during dump - Reworking sctp_for_each_endpoint() to support restart-based traversal with (net, pos) tracking Also: - Add WARN_ON_ONCE() for inconsistent address counts - Fix idiag_states filtering for LISTEN vs association cases - Skip dumping endpoints being freed (ep->base.dead) - Move dump position tracking into iterator, removing cb->args[4] and its comment for sctp_ep_dump()., - Update the comment for cb->args[4] and remove the comment for unused cb->args[5] for sctp_sock_dump(). Note: traversal is restart-based and may re-scan buckets multiple times, but this is acceptable due to small bucket sizes and required to support sleeping-safe callbacks. This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero Day Initiative. | Aug 15, 2026 |
| CVE-2026-72446(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: reject stream disable with no active interface handle_uaudio_stream_req() resolves an interface index with info_idx_from_ifnum(), which returns -EINVAL when no interface matches. The enable branch and the response: cleanup label both guard against a negative index, but the disable branch does not: it forms info = &uadev[pcm_card_num].info[info_idx] and dereferences it. uadev[].info is a pointer allocated only when a stream is first enabled, so a negative info_idx on the disable path is unsafe in two ways: - If the card was never enabled, .info is NULL and &info[-EINVAL] is a wild pointer; reading info->data_ep_pipe faults (kernel oops). - If the card was enabled at least once (.info allocated) and the disable names an interface that does not match, &info[-EINVAL] points before the allocation; info->data_ep_pipe / info->sync_ep_pipe are an out-of-bounds slab read and, when non-zero, an out-of-bounds 4-byte write (both pipe fields are cleared to 0). That is memory corruption, not just a NULL dereference. The request is reachable from unprivileged local userspace over AF_QIPCRTR. Reject a disable request with no resolved interface, matching the guard the enable path already has. | Aug 15, 2026 |
| CVE-2026-72445(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: clear opened when stream enable fails On enable, subs->opened is set before the service_interval is validated; an invalid interval jumps to the response label without clearing it, so the substream is wedged at -EBUSY until a disable or disconnect. Clear subs->opened on the enable error path. | Aug 15, 2026 |
| CVE-2026-72444(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: flow_dissector: check device type before reading ETH_ADDRS __skb_flow_dissect() unconditionally reads 12 bytes from eth_hdr(skb) when FLOW_DISSECTOR_KEY_ETH_ADDRS is requested. This assumes the skb has a valid Ethernet header at mac_header, which is not always the case. The problem can be triggered by: 1. Creating a TUN device in L3 mode (IFF_TUN, hard_header_len=0) 2. Attaching a multiq qdisc with a flower filter matching on eth_src 3. Sending a packet through AF_PACKET Since TUN in L3 mode has no link-layer header, mac_header points to the L3 data area. The flow dissector reads 12 bytes of uninitialized skb memory, which then propagates through fl_set_masked_key() and is used as a rhashtable lookup key in __fl_lookup(), as reported by KMSAN. Rejecting the filter in the control path (at tc filter add time) is not feasible because TC filter blocks can be shared between arbitrary devices -- a filter installed on an Ethernet device may later classify packets on a headerless device through a shared block. The device association is not fixed at filter creation time. Fix this by gating the memcpy on dev->type == ARPHRD_ETHER, which ensures only true Ethernet-framed packets have their addresses read. This is more precise than the previous hard_header_len >= 12 check, which would incorrectly pass for non-Ethernet link types like IPoIB (ARPHRD_INFINIBAND, hard_header_len=24) and FDDI (hard_header_len=21) whose L2 headers are not in Ethernet format. Additionally check skb_mac_header_was_set() to guard against the pathological case where mac_header is the unset sentinel (~0U), which would cause eth_hdr() to return a wild pointer. For the act_mirred redirect case (Ethernet packet redirected to a non-Ethernet device sharing a TC block), zeroing the key is the correct behavior: the packet is now being classified on the target device, where Ethernet address matching is not semantically meaningful. Note: on non-Ethernet devices, the zeroed key will match a filter configured with all-zero MAC addresses. This is an improvement over the previous behavior where uninitialized memory could randomly match any filter. | Aug 15, 2026 |
| CVE-2026-72443(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A later setup failure can still jump to snd_usb_midi_v2_free(), which currently frees each endpoint and its coherent URB buffers without first stopping the submitted URBs. A completion can then dereference the embedded URB context and endpoint state after they have been freed, or try to resubmit from the stale endpoint. This was observed as a KASAN slab-use-after-free in input_urb_complete(). The buggy scenario involves two paths, with each column showing the order within that path: probe error path: USB completion path: 1. start_input_streams() submits 1. The HCD still owns a input URBs. submitted input URB. 2. A later setup helper returns 2. input_urb_complete() runs an error. with urb->context in ep. 3. snd_usb_midi_v2_free() frees 3. The completion reads ep endpoint storage and URB buffers. state and can requeue URBs. Make the endpoint destructor follow the same teardown ordering used for disconnect when the endpoint has not already been disconnected: publish ep->disconnected, kill the URBs synchronously, and drain the endpoint before freeing URB buffers and endpoint storage. The guard avoids repeating the stop sequence after the normal snd_usb_midi_v2_disconnect_all() path, while still synchronizing the direct MIDI 2.0 create-error free path. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in input_urb_complete+0x37/0x1b0 Workqueue: usb_hub_wq hub_event RIP: 0010:_raw_spin_unlock_irq+0x2e/0x50 Read of size 8 Call trace: dump_stack_lvl+0x77/0xb0 print_report+0xce/0x5f0 input_urb_complete+0x37/0x1b0 (sound/usb/midi2.c:186) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 __usb_hcd_giveback_urb+0x112/0x1d0 dummy_timer+0xaaa/0x19a0 lock_is_held_type+0x9a/0x110 __lock_acquire+0x467/0x28b0 mark_held_locks+0x40/0x70 _raw_spin_unlock_irqrestore+0x44/0x60 lockdep_hardirqs_on_prepare+0xbb/0x1a0 __hrtimer_run_queues+0x101/0x520 hrtimer_run_softirq+0xd0/0x130 handle_softirqs+0x15b/0x670 __irq_exit_rcu+0xd0/0x170 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x6c/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 | Aug 15, 2026 |
| CVE-2026-72442(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: fix and simplify IP6IP6 tunnel handling Fix nf_flow_ip6_tunnel_proto() to use pskb_may_pull() instead of skb_header_pointer() to ensure the outer IPv6 header is in the skb headroom, which is required for subsequent packet processing. Move ctx->offset update inside the IPPROTO_IPV6 conditional block since it should only be adjusted when an IP6IP6 tunnel is actually detected. Simplify the rx path by removing ipv6_skip_exthdr() and checking ip6h->nexthdr directly, as the flowtable fast path only handles simple IP6IP6 encapsulation without extension headers. Drop the tunnel encapsulation limit destination option support from the tx path to match, since the rx path no longer handles extension headers. Remove the encap_limit parameter from nf_flow_offload_ipv6_forward(), nf_flow_tunnel_ip6ip6_push() and nf_flow_tunnel_v6_push(), along with the ipv6_tel_txoption struct and related headroom/MTU adjustments. | Aug 15, 2026 |
| CVE-2026-72441(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ieee802154: fix kernel-infoleak in dgram_recvmsg() KMSAN reported a kernel-infoleak in move_addr_to_user(): BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:131 [inline] BUG: KMSAN: kernel-infoleak in _inline_copy_to_user include/linux/uaccess.h:205 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xcc/0x120 lib/usercopy.c:26 instrument_copy_to_user include/linux/instrumented.h:131 [inline] _inline_copy_to_user include/linux/uaccess.h:205 [inline] _copy_to_user+0xcc/0x120 lib/usercopy.c:26 copy_to_user include/linux/uaccess.h:236 [inline] move_addr_to_user+0x2e7/0x440 net/socket.c:302 ____sys_recvmsg+0x232/0x610 net/socket.c:2925 ... Uninit was stored to memory at: ieee802154_addr_to_sa include/net/ieee802154_netdev.h:369 [inline] dgram_recvmsg+0xa09/0xbe0 net/ieee802154/socket.c:739 The issue occurs because the `pan_id` field of `struct ieee802154_addr` is left uninitialized when the address mode is `IEEE802154_ADDR_NONE`. The execution flow is as follows: 1. `__ieee802154_rx_handle_packet()` declares a local `struct ieee802154_hdr hdr` on the stack. 2. `ieee802154_hdr_pull()` calls `ieee802154_hdr_get_addr()` to parse the source and destination addresses into this structure. 3. If the address mode is `IEEE802154_ADDR_NONE`, `ieee802154_hdr_get_addr()` previously only set the `mode` field, leaving the `pan_id` field containing uninitialized stack memory. 4. This uninitialized `pan_id` is later copied into a `struct sockaddr_ieee802154` in `dgram_recvmsg()` via `ieee802154_addr_to_sa()`. 5. Finally, `move_addr_to_user()` copies the socket address structure to user space, leaking the uninitialized bytes. Fix this by using `memset` to zero out the address structure in `ieee802154_hdr_get_addr()` when the mode is `IEEE802154_ADDR_NONE`. | Aug 15, 2026 |
| CVE-2026-72440(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: md/raid1: fix writes_pending and barrier reference leaks on write failures raid1_make_request() acquires a writes_pending reference with md_write_start() before calling raid1_write_request(). Several failure paths in raid1_write_request() complete the bio and return without reaching the normal write completion path, causing the corresponding md_write_end() to be skipped. Make raid1_write_request() return a status indicating whether the write request was successfully queued. This allows raid1_make_request() to call md_write_end() when raid1_write_request() fails. Additionally, if wait_blocked_rdev() fails after wait_barrier() succeeds, the associated barrier reference is not released. Call allow_barrier() before returning from that path to keep the barrier accounting balanced. | Aug 15, 2026 |
| CVE-2026-72439(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix writes_pending leak on write request failures raid10_make_request() acquires a writes_pending reference with md_write_start() before dispatching write requests. Several failure paths in raid10_write_request() complete the bio and return without reaching the normal write completion path, causing the corresponding md_write_end() to be skipped. Make raid10_write_request() return a status indicating whether the write request was successfully queued. This allows raid10_make_request() to release the writes_pending reference with md_write_end() when a write request fails. | Aug 15, 2026 |
| CVE-2026-72438(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix writes_pending and barrier reference leaks on discard failures raid10_make_request() acquires a writes_pending reference with md_write_start() before calling raid10_handle_discard(). Several failure paths in raid10_handle_discard() complete the bio and return without releasing the corresponding reference, causing md_write_end() to be skipped. Call md_write_end() before returning from these failure paths to keep writes_pending accounting balanced. Additionally, discard split allocation failures can occur after wait_barrier() succeeds. Those paths return without calling allow_barrier(), leaking the associated barrier reference. Release the barrier before returning from those paths. | Aug 15, 2026 |
| CVE-2026-72437(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry When a read is retried, raid1_read_request() may be called with a pre-allocated r1_bio. If wait_read_barrier() fails for a REQ_NOWAIT read, the bio is completed and the function returns immediately. In this case the existing r1_bio is leaked. This fixes a leak of pre-allocated r1_bio structures for retried reads. | Aug 15, 2026 |
| CVE-2026-72436(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types Sashiko pointed out that there are a few lockless RCU readers using test_bit() which is a relaxed atomic operation and provides no memory barrier guarantees. Use test_bit_acquire() instead where the operation may run parallel with add/del/gc, i.e. is not one from the next cases - protected by region lock - in a set destroy phase - in a new/temporary set creation phase | Aug 15, 2026 |
| CVE-2026-72435(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix order of kfree_rcu() and rcu_assign_pointer() Sashiko pointed out that kfree_rcu() was called before rcu_assign_pointer() in handling the comment extension. Fix the order so that rcu_assign_pointer() called first. | Aug 15, 2026 |
| CVE-2026-72434(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: make sure gc is properly stopped Sashiko noticed that when destroying a set, cancel_delayed_work_sync() was called while gc calls queue_delayed_work() unconditionally which can lead not to properly shutting down the gc. | Aug 15, 2026 |
| CVE-2026-72433(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_meta_bridge: fix NFT_META_BRI_IIFPVID stack leak This needs to test for nonzero retval. | Aug 15, 2026 |
| CVE-2026-72432(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: tpm_crb: Check ACPI_COMPANION() against NULL during probe Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the tpm_crb driver. | Aug 15, 2026 |
| CVE-2026-72431(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: alloc_tag: fix use-after-free in /proc/allocinfo after module unload allocinfo_start() only reinitializes the codetag iterator at position 0. For subsequent reads (position > 0), it reuses cached iterator state from the previous batch. allocinfo_stop() drops mod_lock between read batches, which allows module unload to complete and free the module memory that the cached iterator still references: CPU0 (read) CPU1 (rmmod) ---- ---- allocinfo_start(pos=0) down_read(mod_lock) allocinfo_show() ... allocinfo_stop() up_read(mod_lock) codetag_unload_module() kfree(cmod) release_module_tags() ... free_mod_mem() allocinfo_start(pos=N) down_read(mod_lock) // reuses cached iter, skips re-init allocinfo_show() ct->filename <-- UAF After free_mod_mem() frees the module's .rodata, allocinfo_show() dereferences ct->filename, ct->function which point there. Save the iterator state in allocinfo_next() and resume from it in allocinfo_start() with codetag_next_ct(), which detects module removal via idr_find() returning NULL and skips to the next module. | Aug 15, 2026 |
| CVE-2026-72430(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix nf_connlabels leak on two error paths tcf_ct_fill_params() calls nf_connlabels_get() (setting put_labels) when TCA_CT_LABELS is present, but two later error sites use a bare return instead of "goto err", skipping the err: nf_connlabels_put() cleanup. They also precede the "p->put_labels = put_labels" assignment, so the tcf_ct_params_free() fallback does not release the count either. Each failed RTM_NEWACTION on these paths leaks one nf_connlabels reference: net->ct.labels_used is incremented and never released. The action is reachable with CAP_NET_ADMIN over the netns, i.e. from an unprivileged user namespace on default-userns kernels. Impact: an unprivileged user with CAP_NET_ADMIN over a network namespace (e.g. via user namespaces) leaks one nf_connlabels reference per failed RTM_NEWACTION on the two error paths; net->ct.labels_used is never released. The err: label is safe to reach from both sites: p->tmpl is still NULL there (kzalloc'd, not yet assigned) and nf_ct_put(NULL) is a no-op, so no inline release is needed. | Aug 15, 2026 |
| CVE-2026-72429(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix type confusion of dst_entry IOAM uses a dummy dst_entry(null_dst) to mark that the destination should not be changed after the transformation. This dst is stored in the IOAM lwt state and may be passed to dst_cache_set_ip6(). However, the IPv6 dst cache path eventually calls rt6_get_cookie(), which treats the dst_entry as part of a struct rt6_info. Since the null_dst was embedded directly as a struct dst_entry in struct ioam6_lwt, this resulted in an invalid cast and rt6_get_cookie() reading fields from the wrong object. In practice, the wrong cookie is not used while dst->obsolete is zero, but rt6_get_cookie() may also access per-cpu value when rt->sernum is zero. In this case, rt->sernum aliases ioam6_lwt::cache::reset_ts, which can become zero, making this a potential invalid pointer access. Fix this by embedding a full struct rt6_info for the dummy IPv6 route and passing its dst member to the dst APIs. | Aug 15, 2026 |
| CVE-2026-72428(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack slot index in nospec checks check_stack_write_fixed_off() computes the byte slot for a fixed-offset stack write as -off - 1, and records each written byte in slot_type[] with (slot - i) % BPF_REG_SIZE. The Spectre v4 sanitization pre-check uses slot_type[i] instead. For a 4-byte write at fp-8 after the lower half of fp-8 has been zeroed, the pre-check scans bytes 0..3 and sees STACK_ZERO while the actual write updates bytes 7..4. That can leave the second half-slot write without nospec_result even though the bytes being overwritten still require sanitization. Use the same slot index in the sanitization pre-check that the write path uses when updating slot_type[]. | Aug 15, 2026 |
| CVE-2026-72427(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix effective prog array index with BPF_F_PREORDER replace_effective_prog() and purge_effective_progs() located the slot in the effective array by walking the program hlist and counting entries linearly. That count does not match the array layout: compute_effective_ progs() places BPF_F_PREORDER programs at the front (ancestor cgroup first, attach order within a cgroup) and the rest after them (descendant cgroup first). So when a preorder program is present, the linear hlist position no longer equals the program's index in the effective array. For replace_effective_prog() (bpf_link_update()) this overwrote the wrong slot, corrupting the effective order. For purge_effective_progs(), it could dummy out a slot belonging to a different program and leave the detached program in the array while bpf_prog_put() drops its reference, i.e. a use-after-free. Fix both by replaying compute_effective_progs()'s placement (including the per-cgroup preorder reversal) in a shared effective_prog_pos() helper. Identify the entry by its struct bpf_prog_list pointer rather than by (prog, link) value, so the lookup resolves to exactly the attachment the syscall selected even when the same bpf_prog is attached to several cgroups in the hierarchy. | Aug 15, 2026 |
| CVE-2026-72426(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve pointer spill metadata during half-slot cleanup __clean_func_state() cleans dead stack slots in 4-byte halves. When the high half of a STACK_SPILL slot is dead and the low half remains live, cleanup converts the live low half to STACK_MISC or STACK_ZERO and clears the saved spilled_ptr metadata. That conversion is safe only for scalar spills. For a pointer spill, this metadata clear lets a later 32-bit fill from the still-live half avoid the normal non-scalar register-fill check and be treated as an ordinary scalar stack read. Leave non-scalar spill slots intact in this half-live shape. This is conservative for pruning and preserves the existing check_stack_read_fixed_off() rejection path for partial fills from pointer spills. | Aug 15, 2026 |
| CVE-2026-72425(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs() Resetting all VFs causes resource leak on VFs with FDIR filters enabled as CTRL VSIs are only invalidated and not freed. Fix by using ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which aligns behavior with the ice_reset_vf() function. Reproduction: echo 1 > /sys/class/net/$pf/device/sriov_numvfs ethtool -N $vf flow-type ether proto 0x9000 action 0 echo 1 > /sys/class/net/$pf/device/reset | Aug 15, 2026 |
| CVE-2026-72424(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: rtc: msc313: fix NULL deref in shared IRQ handler at probe msc313_rtc_probe() calls devm_request_irq() with IRQF_SHARED and &pdev->dev as the cookie, but platform_set_drvdata() is only called later after the clock setup. With a shared IRQ line, another device on the same line can trigger the handler in that window. The handler does dev_get_drvdata() on the cookie, gets NULL, and dereferences priv->rtc_base in interrupt context. Pass priv as the cookie directly so the handler reads it from dev_id without the lookup, removing the dependency on probe order. | Aug 15, 2026 |