Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
43,392 matching · page 134/868Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-74275(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix out-of-bounds access in cxl_cancel_auto_attach() In cxl_cancel_auto_attach(), it assumes cxled->pos is a valid index for accessing p->targets[]. However, cxled->pos can be set to negative errno in cxl_region_sort_targets() if cxl_calc_interleave_pos() fails. This causes the driver to use a negative index to access p->targets[], resulting in out-of-bounds access. Fix it by walking p->targets[] instead of using cxled->pos directly. | Aug 15, 2026 |
| CVE-2026-74274(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fill first free targets[] slot during auto-discovery Any invalid endpoint decoder pointer in the target array of an active region is not allowed by cxl driver. This means cxl driver always assumes the first p->nr_targets entries of the target array in an auto-assembly region are valid. However, there are scenarios that could leave NULL endpoint decoder pointer holes in the target array. 1. When cxl_cancel_auto_attach() removes an endpoint decoder from a target array, the target slot is set to NULL. If the removed endpoint decoder is not the last element in the target array, the target array will contain a NULL hole. 2. When a auto-assembly region removes an assigned endpoint decoder, if the removed endpoint decoder is not the last element in the target array, always remains a NULL hole in the target array. When a NULL pointer hole exists in a region's target array, it introduces two potential problems: 1. Access an endpoint decoder via a NULL pointer. it always trigger calltrace like that. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KASAN PTI RIP: 0010:cxl_calc_interleave_pos+0x26/0x810 [cxl_core] Call Trace: <TASK> cxl_region_attach+0xc50/0x2140 [cxl_core] cxl_add_to_region+0x321/0x2330 [cxl_core] discover_region+0x92/0x150 [cxl_port] device_for_each_child+0xf3/0x170 cxl_port_probe+0x150/0x200 [cxl_port] cxl_bus_probe+0x4f/0xa0 [cxl_core] really_probe+0x1c8/0x960 __driver_probe_device+0x323/0x450 driver_probe_device+0x45/0x120 __device_attach_driver+0x15d/0x280 bus_for_each_drv+0x10f/0x190 2. Not having enough valid endpoint decoders attached to an auto-assembly region. if an auto-assembly region is created with lock flag or assigned endpoint decoder with lock flag, which means assigned endpoint decoder will not be reset during detaching, they could re-attach to the auto-assembly region again. But cxl region driver relies on p->nr_targets to verify whether the required number of endpoint decoders has been attached, and NULL endpoint decoder pointers are still counted in that case. To fix above issues, adjust cxl_region_attach_auto() logic to find the first free target slot for endpoint decoder attachment, this ensures NULL holes in the target array are filled, rather than adding new endpoint decoders at the tail of the target array. | Aug 15, 2026 |
| CVE-2026-74273(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: cxl/region: Block region delete during region creation Expand the range lock, rename it "regions_lock", to disable region deletion in the critical period between construct_region() and attach_target(), as well as the period between device_add() and registering the remove actions. Otherwise, userspace can confuse the kernel. It can violate the assumption the region stays registered through the completion of cxl_add_to_region(). It can violate the assumption that devm_add_action_or_reset() is working with a live 'struct cxl_region'. It is ok for the region to disappear outside of those windows as that mirrors device hotplug flows where the proper locks are held. | Aug 15, 2026 |
| CVE-2026-74272(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: cxl/region: Resolve region deletion races Sungwoo noticed that the sysfs trigger to delete a region may try to delete a region multiple times. It also has no exclusion relative to the kernel releasing the region via CXL root device teardown. Instead of installing new cxl root devres actions per region, use the existing root decoder unregistration event to remove all remaining regions. An xarray of regions replaces a devres list of regions. This handles 3 separate issues with the old approach: 1/ sysfs users racing to delete the same region: no longer possible now that the regions_lock is held over the lookup and deletion. 2/ multiple actions triggering deletion of the same region: solved by erasing regions while holding @regions_lock, and only proceeding on successful erasure. 3/ userspace racing devres_release_all() to trigger the devres not found warning: solved by sysfs unregistration not requiring a release action | Aug 15, 2026 |
| CVE-2026-74271(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: power: supply: core: fix supplied_from allocations If dts property power-supplies has multiple values, then accessing to psy->supplied_from[i-1] in __power_supply_populate_supplied_from will overrun supplied_from array. | Aug 15, 2026 |
| CVE-2026-74270(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: handshake: Require admin permission for DONE command ACCEPT and DONE are the two downcalls of the handshake genl family, both intended for use by the trusted handshake agent (tlshd). ACCEPT already requires GENL_ADMIN_PERM; DONE has no privilege check at all. The fd-lookup in handshake_nl_done_doit() only confirms that some pending handshake request exists for the supplied sockfd; it does not authenticate the sender. An unprivileged process that guesses or observes a valid sockfd can therefore submit a DONE with HANDSHAKE_A_DONE_STATUS == 0, leaving the kernel consumer to proceed as if the handshake succeeded. A non-zero status on a forged DONE tears down a legitimate in-flight handshake before tlshd can report its real result. | Aug 15, 2026 |
| CVE-2026-74269(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: bnxt: fix head underflow on XDP head-grow The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on a bnxt machine (and also crashes in NIPA). It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which builds the skb head: napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size); The problem with this expression is that in page mode, rx_offset is: bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM; Which evaluates (at least on x86_64) to 258. The test test_xdp_native_adjst_head_grow_data tests a case where the head is adjusted by -256. When this test runs, data_ptr is shifted to frag_start + 2 (where frag_start = page_address(page) + offset). Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb expression subtracts 258, landing at an address before frag_start. This could be either the previous fragment or the previous physical page when the offset is < 256 (e.g. if the fragment started at offset 0). When the skb is freed, the page pool fragment reference is dropped on either the wrong page or the wrong frag of the right page. In either case, the corrupted reference count can lead to the page being prematurely recycled while still in use. Once (incorrectly) recycled, it can be handed out again and on driver teardown this would result in a double free. The commit under fixes updated this code to handle the case where the native page size is >= 64k, but it unintentionally broke the head grow case. To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on allocation and preserve it on reuse. In bnxt_rx_multi_page_skb, use the newly added offset field to compute the fragment start and pass that to napi_build_skb. Adjust the layout with skb_reserve. There are two cases, the non-adjustment case and the adjustment case. In both cases, the skb is built at page_address(page) + offset to account for the case where the native page size >= 64K and skb_reserve is called with data_ptr - (page_address(page) + offset). That difference equals bp->rx_offset when data_ptr was not moved, or bp->rx_offset + xdp_adjust when XDP adjusted the head. Re-running the failing test with this commit applied causes the test to run successfully to completion. The other rx_skb_func implementations don't have this issue. | Aug 15, 2026 |
| CVE-2026-74268(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: tcp: clear sock_ops cb flags before force-closing a child socket A child socket inherits the listener's bpf_sock_ops_cb_flags via sk_clone_lock(). If its setup fails in tcp_v4_syn_recv_sock() / tcp_v6_syn_recv_sock(), the child is freed through put_and_exit, where inet_csk_prepare_forced_close() drops the socket lock and tcp_done() runs without it. If BPF_SOCK_OPS_STATE_CB_FLAG was inherited, tcp_done() -> tcp_set_state() calls tcp_call_bpf(), which expects the lock and trips sock_owned_by_me(): WARNING: include/net/sock.h:1799 at tcp_set_state+0x433/0x550 RIP: 0010:tcp_set_state+0x433/0x550 include/net/sock.h:1799 Call Trace: <IRQ> tcp_done+0xba/0x250 net/ipv4/tcp.c:5095 tcp_v4_syn_recv_sock+0x850/0xa50 net/ipv4/tcp_ipv4.c:1787 tcp_check_req+0xf30/0x1360 net/ipv4/tcp_minisocks.c:926 tcp_v4_rcv+0x1047/0x1b50 net/ipv4/tcp_ipv4.c:2164 </IRQ> The child is freed before it is ever established, so it should run no sock_ops callback. Clear its cb flags in inet_csk_prepare_for_destroy_sock(), the common point for the IPv4, IPv6 and chtls forced-close paths and for the MPTCP ->syn_recv_sock() failure path (dispose_child), which reaches tcp_done() on a child that was never established too. | Aug 15, 2026 |
| CVE-2026-74267(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen Whenever codel drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though codel still has 1 packet on the queue and, thus, will mistakenly deactivate the parent's class causing issues like a wild memory access when qfq has codel as a child: [ 36.339843][ T370] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI [ 36.340408][ T370] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] [ 36.340737][ T370] CPU: 2 UID: 0 PID: 370 Comm: tc Not tainted 7.1.0-rc5-00287-g66e13b626592 #87 PREEMPT(full) [ 36.341113][ T370] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 36.341357][ T370] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq [ 36.342221][ T370] RSP: 0018:ffff8881100ef370 EFLAGS: 00010216 [ 36.342422][ T370] RAX: 0000000000000000 RBX: ffff8881058a9568 RCX: dffffc0000000000 [ 36.342664][ T370] RDX: 1ffff11021064dc3 RSI: ffff888108326e00 RDI: dffffc0000000000 [ 36.342905][ T370] RBP: ffff8881058a8280 R08: dead000000000122 R09: 1bd5a00000000024 [ 36.343140][ T370] R10: fffffbfff2940329 R11: fffffbfff2940329 R12: 0000000000000000 [ 36.343383][ T370] R13: dead000000000100 R14: ffff8881058a9580 R15: ffff8881058a9578 [ 36.343631][ T370] FS: 00007fc04b0ca780(0000) GS:ffff888184fef000(0000) knlGS:0000000000000000 [ 36.343911][ T370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.344116][ T370] CR2: 0000557c02c02000 CR3: 000000010e0ba000 CR4: 0000000000750ef0 [ 36.344359][ T370] PKRU: 55555554 [ 36.344481][ T370] Call Trace: ... [ 36.345054][ T370] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq [ 36.345222][ T370] qdisc_reset (net/sched/sch_generic.c:1057) [ 36.345503][ T370] __qdisc_destroy (net/sched/sch_generic.c:1096) [ 36.345677][ T370] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 36.346335][ T370] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556) Fix this by only calling qdisc_tree_reduce_backlog in peek after the qlen is restored. | Aug 15, 2026 |
| CVE-2026-74266(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_dualpi2: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen Whenever dualpi2 drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though dualpi2 still has 1 packet on the queue and, thus, mistakenly deactivates the parent's class which leads to a null-ptr-deref: [ 101.427314][ T599] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] SMP KASAN NOPTI [ 101.427755][ T599] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f] [ 101.428048][ T599] CPU: 2 UID: 0 PID: 599 Comm: ping Not tainted 7.1.0-rc5-00284-gbce53c430ed7 #102 PREEMPT(full) [ 101.428400][ T599] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 101.428608][ T599] RIP: 0010:qfq_dequeue (net/sched/sch_qfq.c:1150) sch_qfq [ 101.428821][ T599] Code: 00 fc ff df 80 3c 02 00 0f 85 46 0c 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 2d 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b All code [ 101.429348][ T599] RSP: 0018:ffff8881110df4f0 EFLAGS: 00010216 [ 101.429541][ T599] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000 [ 101.429763][ T599] RDX: 0000000000000009 RSI: 00000024c0000000 RDI: ffff88811436c2b0 [ 101.429985][ T599] RBP: ffff88811436c000 R08: ffff88811436c280 R09: 1ffff11021277523 [ 101.430206][ T599] R10: 1ffff11021277526 R11: 1ffff11021277527 R12: 00000024c0000000 [ 101.430423][ T599] R13: ffff88811436c2b8 R14: 0000000000000048 R15: 0000000020000000 [ 101.430642][ T599] FS: 00007f61813e1c40(0000) GS:ffff8881691ef000(0000) knlGS:0000000000000000 [ 101.430913][ T599] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.431100][ T599] CR2: 00005651650850a8 CR3: 000000010ca0b000 CR4: 0000000000750ef0 [ 101.431320][ T599] PKRU: 55555554 [ 101.431433][ T599] Call Trace: [ 101.431544][ T599] <TASK> [ 101.431628][ T599] __qdisc_run (net/sched/sch_generic.c:322 net/sched/sch_generic.c:427 net/sched/sch_generic.c:445) [ 101.431792][ T599] ? dev_qdisc_enqueue (./include/trace/events/qdisc.h:49 (discriminator 22) net/core/dev.c:4176 (discriminator 22)) [ 101.431941][ T599] __dev_queue_xmit (./include/net/pkt_sched.h:120 ./include/net/pkt_sched.h:117 net/core/dev.c:4292 net/core/dev.c:4831) Fix this by only calling qdisc_tree_reduce_backlog in peek after the qlen is restored. | Aug 15, 2026 |
| CVE-2026-74265(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: net: mana: initialize gdma queue id to INVALID_QUEUE_ID mana_gd_create_mana_wq_cq() leaves queue->id as 0 (from kzalloc_obj()) until mana_create_wq_obj() assigns the firmware-returned id. If creation fails before that, cleanup calls mana_gd_destroy_cq() with id 0, NULLing gc->cq_table[0] and silently breaking whichever real CQ owns that slot. Initialize queue->id to INVALID_QUEUE_ID right after allocation, matching mana_gd_create_eq(). The existing (id >= max_num_cqs) guard then short-circuits cleanly. | Aug 15, 2026 |
| CVE-2026-74264(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net: watchdog: fix refcount tracking races Blamed commit converted the untracked dev_hold()/dev_put() calls in the watchdog code to use the tracked dev_hold_track()/dev_put_track() (which were later renamed/interfaced to netdev_hold() and netdev_put()). By introducing dev->watchdog_dev_tracker to store the reference tracking information without adding synchronization between netdev_watchdog_up() and dev_watchdog(), it enabled the race condition where this pointer could be overwritten or freed concurrently, leading to the list corruption crash syzbot reported: list_del corruption, ffff888114a18c00->next is NULL kernel BUG at lib/list_debug.c:52 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 91 Comm: kworker/u8:5 Not tainted syzkaller #0 PREEMPT(lazy) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026 Workqueue: events_unbound linkwatch_event RIP: 0010:__list_del_entry_valid_or_report.cold+0x22/0x2a lib/list_debug.c:52 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:132 [inline] __list_del_entry include/linux/list.h:246 [inline] list_move_tail include/linux/list.h:341 [inline] ref_tracker_free+0x1a7/0x6c0 lib/ref_tracker.c:329 netdev_tracker_free include/linux/netdevice.h:4491 [inline] netdev_put include/linux/netdevice.h:4508 [inline] netdev_put include/linux/netdevice.h:4504 [inline] netdev_watchdog_down net/sched/sch_generic.c:600 [inline] dev_deactivate_many+0x28c/0xfe0 net/sched/sch_generic.c:1363 dev_deactivate+0x109/0x1d0 net/sched/sch_generic.c:1397 linkwatch_do_dev net/core/link_watch.c:184 [inline] linkwatch_do_dev+0xd3/0x120 net/core/link_watch.c:166 __linkwatch_run_queue+0x3a5/0x810 net/core/link_watch.c:240 linkwatch_event+0x8f/0xc0 net/core/link_watch.c:314 process_one_work+0xa0e/0x1980 kernel/workqueue.c:3314 process_scheduled_works kernel/workqueue.c:3397 [inline] worker_thread+0x5ef/0xe50 kernel/workqueue.c:3478 kthread+0x370/0x450 kernel/kthread.c:436 ret_from_fork+0x69a/0xc80 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 This patch has three coordinated parts: 1) Add dev->watchdog_lock and dev->watchdog_ref_held to serialize watchdog operations. 2) Remove netdev_watchdog_up() call from netif_carrier_on(): This ensures netdev_watchdog_up() is only called from process/BH context (via linkwatch workqueue dev_activate()), allowing us to use spin_lock_bh() for synchronization. 3) Synchronize watchdog up and watchdog timer: Protect netdev_watchdog_up() with tx_global_lock and watchdog_lock. Only allocate a new tracker in netdev_watchdog_up() if one is not already present. In dev_watchdog(), ensure we don't release the tracker if the timer was rescheduled either by dev_watchdog() itself or concurrently by netdev_watchdog_up(). | Aug 15, 2026 |
| CVE-2026-74263(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: check skb_clone in control TX t7xx_port_ctrl_tx() clones each skb fragment before passing it to the port transmit path. The clone is used immediately to set cloned->len, so an skb_clone() failure results in a NULL pointer dereference. Check the clone before using it. If previous fragments were already queued, preserve the driver's existing partial-write behavior by returning the number of bytes submitted so far. | Aug 15, 2026 |
| CVE-2026-74262(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: kcm: use WRITE_ONCE() when changing lower socket callbacks kcm_attach() replaces a live lower TCP socket's sk_data_ready and sk_write_space callbacks with KCM handlers, and kcm_unattach() restores them later. Those callback-pointer updates are still plain stores even though the same fields can be read and invoked concurrently on other CPUs. If another CPU observes an older callback snapshot after the live field has already been restored, callback execution can run with a mismatched target and sk_user_data state, leading to stale or misdirected wakeups. Use WRITE_ONCE() for the callback replacement and restore operations so these shared callback fields follow the same visibility contract already established by the earlier 4022 fixes. | Aug 15, 2026 |
| CVE-2026-74261(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: avoid stale FIFO cells during resize snd_seq_fifo_resize() still needs to publish the replacement pool before it waits for FIFO users. A blocking snd_seq_read() holds f->use_lock while it sleeps, so concurrent senders must be able to queue to the new pool and wake that reader instead of failing against a closing old pool. However, snd_seq_fifo_event_in() duplicates an event before it takes f->lock, and snd_seq_read() can dequeue a cell and later call snd_seq_fifo_cell_putback() if copy_to_user() or snd_seq_expand_var_event() fails. If resize swaps f->pool and detaches oldhead in between, either path can relink an old-pool cell after the snapshot. That stale cell sits outside the drained oldhead list, keeps oldpool->counter elevated, and can leave snd_seq_pool_delete() waiting for the retired pool to drain. Keep the existing swap-before-wait ordering in snd_seq_fifo_resize(), but reject stale cells before any FIFO relink. Revalidate event-in cells under f->lock and retry them against the published replacement pool, and free stale putback cells instead of linking them back into the FIFO. The buggy scenario involves two paths, with each column showing the order within that path: resize path: relink path: 1. Allocate newpool. 1. Take f->use_lock. 2. Swap f->pool to newpool and 2. Duplicate or dequeue an old-pool detach oldhead. cell before oldpool closes. 3. Mark oldpool closing and 3. Reach a later relink point after wait for FIFO users. resize published newpool. 4. Free oldhead and delete 4. Relink the old-pool cell after oldpool. resize detached oldhead. 5. Drop f->use_lock. The reproducer reports a resize ioctl blocked in the expected pool teardown path: signal: resize iteration=98 target_pool=4 exceeded 250ms (elapsed=251ms) diagnostic: resize_tid=651 wchan=snd_seq_pool_done diagnostic: resize_tid=651 stack= snd_seq_pool_done+0x5b/0x140 snd_seq_pool_delete+0x7a/0x90 snd_seq_fifo_resize+0x193/0x1e0 snd_seq_ioctl_set_client_pool+0x214/0x260 snd_seq_ioctl+0x119/0x540 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f A second run with larger pools hit the same target path: signal: resize iteration=32 target_pool=64 exceeded 250ms (elapsed=251ms) diagnostic: resize_tid=663 wchan=snd_seq_pool_done diagnostic: resize_tid=663 stack= snd_seq_pool_done+0x5b/0x140 snd_seq_pool_delete+0x7a/0x90 snd_seq_fifo_resize+0x193/0x1e0 snd_seq_ioctl_set_client_pool+0x214/0x260 snd_seq_ioctl+0x119/0x540 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | Aug 15, 2026 |
| CVE-2026-74260(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_dup_netdev: add nf_dev_xmit_recursion*() helpers and use them Update nft_dup and nft_fwd to use the nf_dev_xmit_recursion() helpers. This patch also disables BH when transmitting the skb to address a possible migration to different CPU leading to imbalanced decrementation of the recursion counters. This is modeled after Florian Westphal's dev_xmit_recursion*() API available since commit 97cdcf37b57e ("net: place xmit recursion in softnet data") according to its current state in the tree. | Aug 15, 2026 |
| CVE-2026-74259(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: cifs: remove all cifs files before kill super Cifs files may be put into fileinfo_put_wq during umounting cifs. After umount done, cifsFileInfo_put_final is called, which cause following BUG: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 134.222152] list_lru_add+0x64/0x1a0 [ 134.222399] ? cifs_put_tcon+0x171/0x340 [cifs] [ 134.222772] d_lru_add+0x44/0x60 [ 134.222997] dput+0x1fc/0x210 [ 134.223213] cifsFileInfo_put_final+0x11a/0x140 [cifs] [ 134.223576] process_one_work+0x17c/0x320 [ 134.223843] worker_thread+0x188/0x280 [ 134.224084] ? __pfx_worker_thread+0x10/0x10 [ 134.224366] kthread+0xcc/0x100 [ 134.224576] ? __pfx_kthread+0x10/0x10 [ 134.224827] ret_from_fork+0x30/0x50 [ 134.225063] ? __pfx_kthread+0x10/0x10 [ 134.225328] ret_from_fork_asm+0x1b/0x30 This can be reproduce by following: unshare -n bash -c " mkdir -p ${CIFS_MNT} ip netns attach root 1 ip link add eth0 type veth peer veth0 netns root ip link set eth0 up ip -n root link set veth0 up ip addr add 192.168.0.2/24 dev eth0 ip -n root addr add 192.168.0.1/24 dev veth0 ip route add default via 192.168.0.1 dev eth0 ip netns exec root sysctl net.ipv4.ip_forward=1 ip netns exec root iptables -t nat -A POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE mount -t cifs ${CIFS_PATH} ${CIFS_MNT} -o vers=3.0,sec=ntlmssp,credentials=${CIFS_CRED},rsize=65536,wsize=65536,cache=none,echo_interval=1 touch ${CIFS_MNT}/a.txt ip netns exec root iptables -t nat -D POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE " umount ${CIFS_MNT} | Aug 15, 2026 |
| CVE-2026-74258(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: bpf: Guard __get_user acesss with access_ok for uprobe_multi data As reported by sashiko [1] we need to use access_ok to check the user space data bounds before we use __get-user to get it. [1] https://lore.kernel.org/bpf/20260610145235.CB1441F00893@smtp.kernel.org/ | Aug 15, 2026 |
| CVE-2026-74257(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: sockmap: Fix use-after-free in udp_bpf_recvmsg() syzbot reported use-after-free of struct sk_msg in sk_msg_recvmsg(). [0] sk_msg_recvmsg() peeks sk_msg from psock->ingress_msg under a lock, but its processing is lockless. Thus, sk_msg_recvmsg() must be serialised by callers, otherwise multiple threads could touch the same sk_msg. For example, TCP uses lock_sock(), and AF_UNIX uses unix_sk(sk)->iolock. Initially, udp_bpf_recvmsg() had used lock_sock(), but the cited commit removed it. Let's serialise sk_msg_recvmsg() with lock_sock() in udp_bpf_recvmsg(). Note that holding spin_lock_bh(&sk->sk_receive_queue.lock) is not an option due to copy_page_to_iter() in sk_msg_recvmsg(). [0]: BUG: KASAN: slab-use-after-free in sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428 Read of size 4 at addr ffff88814cdcf000 by task syz.0.24/6020 CPU: 1 UID: 0 PID: 6020 Comm: syz.0.24 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xba/0x230 mm/kasan/report.c:482 kasan_report+0x117/0x150 mm/kasan/report.c:595 sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428 udp_bpf_recvmsg+0x4bd/0xe00 net/ipv4/udp_bpf.c:84 inet_recvmsg+0x260/0x270 net/ipv4/af_inet.c:891 sock_recvmsg_nosec net/socket.c:1078 [inline] sock_recvmsg+0x1a8/0x270 net/socket.c:1100 ____sys_recvmsg+0x1e6/0x4a0 net/socket.c:2812 ___sys_recvmsg+0x215/0x590 net/socket.c:2854 do_recvmmsg+0x334/0x800 net/socket.c:2949 __sys_recvmmsg net/socket.c:3023 [inline] __do_sys_recvmmsg net/socket.c:3046 [inline] __se_sys_recvmmsg net/socket.c:3039 [inline] __x64_sys_recvmmsg+0x198/0x250 net/socket.c:3039 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fb319f9aeb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb31ad97028 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00007fb31a216090 RCX: 00007fb319f9aeb9 RDX: 0000000000000001 RSI: 0000200000000400 RDI: 0000000000000004 RBP: 00007fb31a008c1f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000040000021 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fb31a216128 R14: 00007fb31a216090 R15: 00007ffe21dd0a98 </TASK> Allocated by task 6019: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __kmalloc_cache_noprof+0x3d1/0x6e0 mm/slub.c:5780 kmalloc_noprof include/linux/slab.h:957 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] alloc_sk_msg net/core/skmsg.c:510 [inline] sk_psock_skb_ingress_self+0x60/0x350 net/core/skmsg.c:612 sk_psock_verdict_apply net/core/skmsg.c:1038 [inline] sk_psock_verdict_recv+0x7d9/0x8d0 net/core/skmsg.c:1236 udp_read_skb+0x73e/0x7e0 net/ipv4/udp.c:2045 sk_psock_verdict_data_ready+0x12d/0x550 net/core/skmsg.c:1257 __udp_enqueue_schedule_skb+0xc54/0x10b0 net/ipv4/udp.c:1789 __udp_queue_rcv_skb net/ipv4/udp.c:2346 [inline] udp_queue_rcv_one_skb+0xac5/0x19c0 net/ipv4/udp.c:2475 __udp4_lib_mcast_deliver+0xc06/0xcf0 net/ipv4/udp.c:2585 __udp4_lib_rcv+0x10f6/0x2620 net/ipv4/udp.c:2724 ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241 NF_HOOK+0x336/0x3c0 include/linux/netfilter.h:318 dst_input include/net/dst.h:474 [inline] ip_sublist_rcv_finish+0x221/0x2a0 net/ipv4/ip_input.c:584 ip_list_rcv_finish net/ipv4/ip_inp ---truncated--- | Aug 15, 2026 |
| CVE-2026-74256(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check start and len are u32, so u64 last = start + len; evaluates start + len in 32-bit and wraps before storing it in last. The bounds check if (start >= offset + l || last > msg->sg.size) return -EINVAL; can then be passed with an out-of-range start/len, after which the pop loop runs off the end of the scatterlist and sk_msg_shift_left() calls put_page() on the empty msg->sg.end slot: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:sk_msg_shift_left net/core/filter.c:2957 [inline] RIP: 0010:____bpf_msg_pop_data net/core/filter.c:3103 [inline] RIP: 0010:bpf_msg_pop_data+0x753/0x1a10 net/core/filter.c:2984 Call Trace: <TASK> bpf_prog_4cc92c278f4d5d56+0x1b1/0x1e8 bpf_prog_run_pin_on_cpu+0x107/0x320 include/linux/filter.h:746 sk_psock_msg_verdict+0x357/0x7f0 net/core/skmsg.c:934 tcp_bpf_send_verdict net/ipv4/tcp_bpf.c:420 [inline] tcp_bpf_sendmsg+0x766/0x1ae0 net/ipv4/tcp_bpf.c:583 __sock_sendmsg+0x153/0x1c0 net/socket.c:802 __sys_sendto+0x326/0x430 net/socket.c:2265 __x64_sys_sendto+0xe3/0x100 net/socket.c:2268 do_syscall_64+0x14c/0x480 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Widen the addition with a (u64) cast so the bound is evaluated in 64-bit and a len near U32_MAX no longer wraps below msg->sg.size. While here, change pop from int to u32. It counts bytes against the unsigned scatterlist lengths and can never be negative, so the signed type only invites sign-confusion in the pop loop. | Aug 15, 2026 |
| CVE-2026-74255(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in tipc_l2_send_msg() Syzbot reported a slab-use-after-free in ipvlan_hard_header() when called from tipc_l2_send_msg(). The root cause is that tipc_disable_l2_media() calls synchronize_net() while b->media_ptr is still valid. This allows concurrent RCU readers to obtain the device pointer after synchronize_net() has finished. The pointer is cleared later in bearer_disable(), but without any subsequent synchronization, allowing the device to be freed while still in use by readers. Fix this by clearing b->media_ptr in tipc_disable_l2_media() before calling synchronize_net(). This is safe to do now because the call order in bearer_disable() was reversed in 0d051bf93c06 ("tipc: make bearer packet filtering generic") to call tipc_node_delete_links() (which needs the pointer) before disable_media(). https: //lore.kernel.org/netdev/6a2c1007.428ffe26.258b27.015d.GAE@google.com/T/#u | Aug 15, 2026 |
| CVE-2026-72502(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: tcp: ipv6: clamp default adverting MSS to avoid GSO_BY_FRAGS (0xFFFF) When MTU is large, ip6_default_advmss() can return IPV6_MAXPLEN (65535). This is interpreted by TCP as mss_clamp, allowing the MSS to reach 65535. However, 0xFFFF is also used as a magic value GSO_BY_FRAGS in the kernel. If a TCP packet with gso_size=0xFFFF is passed to skb_segment(), it will be mistakenly treated as GSO_BY_FRAGS, leading to a NULL pointer dereference because local TCP packets do not use frag_list. Fix this by returning min(IPV6_MAXPLEN, GSO_BY_FRAGS - 1) (65534) from ip6_default_advmss() when MTU is large. Also update the stale comment in ip6_default_advmss() which suggested that IPV6_MAXPLEN is returned to mean "any MSS". | Aug 15, 2026 |
| CVE-2026-72501(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Initialize dpi variable to zero dpi is initialized only for BNXT_RE_ALLOC_WC_PAGE, but copied for all the cases. So initialize the dpi to 0. | Aug 15, 2026 |
| CVE-2026-72500(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Free SRQ toggle page after firmware teardown Free the toggle page only after firmware teardown completes so that an NQ interrupt arriving during bnxt_qplib_destroy_srq() won't write the toggle values to an already-freed page. Move free_page() after bnxt_qplib_destroy_srq(). | Aug 15, 2026 |
| CVE-2026-72499(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Free CQ toggle page after firmware teardown Free the toggle page only after firmware teardown completes so that an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write the toggle value to an already-freed page. Move free_page() after bnxt_qplib_destroy_cq. | Aug 15, 2026 |
| CVE-2026-72498(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Avoid displaying the kernel pointer While dumping the info on MR using the rdma tool, we dump the mr_hwq which is a kernel pointer. There is no need to expose this value for end user. So avoid it. | Aug 15, 2026 |
| CVE-2026-72497(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Add a max slot check for SQ The variable WQE mode must be validated against the maximum slots supported by HW. The max supported value is 64K. Adding a max and min check and fail if user supplied value is more than the max supported and zero. | Aug 15, 2026 |
| CVE-2026-72496(opens NVD record) | Critical | 9.2 | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Proper rollback if the ioremap fails bnxt_qplib_alloc_dpi returns success even if ioremap fails. Add the proper rollback when the ioremap fails and return -ENOMEM status. | Aug 15, 2026 |
| CVE-2026-72495(opens NVD record) | Critical | 9.3 | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Avoid repeated requests to allocate WC pages Applications can request multiple WC pages for the same ucontext. As of now, only 1 WC page per ucontext is supported. Add a lock to avoid concurrent access and a check to fail repeated requests. Also, if the mmap entry insert fails for the WC, free the Doorbell page index mapped for the WC page. | Aug 15, 2026 |
| CVE-2026-72494(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Replace waitqueue and flag with completion The driver previously used a waitqueue along with an explicit request_done flag, but without proper barriers around request_done. An earlier patch by Gui-Dong Han <hanguidong02@gmail.com> attempted to fix this by adding the missing memory barriers. Rather than adding the barriers, this patch replaces the waitqueue+flag with a completion, which is designed for this exact purpose. | Aug 15, 2026 |
| CVE-2026-72493(opens NVD record) | Critical | 9.9 | In the Linux kernel, the following vulnerability has been resolved: net: serialize netif_running() check in enqueue_to_backlog() Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup(). The root cause is a race condition where packets can escape the backlog flushing during device unregistration (e.g., during netns exit). Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration") introduced a lockless netif_running() check in enqueue_to_backlog() to prevent queuing packets to an unregistering device. However, this creates a TOCTOU race window. A lockless transmitter (like veth_xmit) can pass the check before dev_close() clears IFF_UP. If the transmitter is then delayed, flush_all_backlogs() can run and finish before the transmitter grabs the backlog lock and queues the packet. The packet then escapes the flush and triggers UAF later when processed. Fix this by moving the netif_running() check inside the backlog lock. This serializes the check with the flush work (which also grabs the lock). We then either queue the packet before the flush runs (so it gets flushed), or check netif_running() after the flush/close completes (so it gets dropped). | Aug 15, 2026 |
| CVE-2026-72492(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in same_client_has_lease() same_client_has_lease() returns an opinfo pointer from ci->m_op_list after dropping ci->m_lock without taking a reference. smb_grant_oplock() then dereferences that pointer in copy_lease() and when checking breaking_cnt. A concurrent close can remove the old lease from ci->m_op_list and drop the last reference before the caller uses the returned pointer, leading to a use-after-free. Take a reference when same_client_has_lease() selects an existing lease, drop any previous match while scanning, and release the returned reference in smb_grant_oplock() after copying the lease state. | Aug 15, 2026 |
| CVE-2026-72491(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: net/9p: fix race condition on rdma->state in trans_rdma.c The rdma->state field is modified without holding req_lock in both recv_done() and p9_cm_event_handler(), while rdma_request() accesses the same field under the req_lock spinlock. This inconsistent locking creates a race condition: - recv_done() running in softirq completion context sets rdma->state = P9_RDMA_FLUSHING without acquiring req_lock - p9_cm_event_handler() modifies rdma->state at multiple points (ADDR_RESOLVED, ROUTE_RESOLVED, ESTABLISHED, CLOSED) without req_lock - rdma_request() uses spin_lock_irqsave(&rdma->req_lock, flags) to protect the read-modify-write of rdma->state The race can cause lost state transitions: recv_done() or the CM event handler could set state to FLUSHING/CLOSED while rdma_request() is concurrently checking or modifying state under the lock, leading to the FLUSHING transition being silently overwritten by CLOSING. This corrupts the connection state machine and can cause use-after-free on RDMA request objects during teardown. Fix by adding req_lock protection to all rdma->state modifications in recv_done() and p9_cm_event_handler(), matching the pattern already used in rdma_request(). Use spin_lock_irqsave/spin_unlock_irqrestore in the CM event handler since it can race with recv_done() which runs in softirq context. Tested with a kernel module that races two threads (simulating rdma_request and recv_done/CM handler) on rdma->state with proper locking: 5.5M+ FLUSHING writes over 27M iterations with 0 lost transitions. | Aug 15, 2026 |
| CVE-2026-72490(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix stainfo check in rtw_aes_decrypt The null-pointer-guard was incorrect, returning _FAIL on valid pointer. Invert the guard, so it returns _FAIL on invalid pointer. | Aug 15, 2026 |
| CVE-2026-72489(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: staging: nvec: fix use-after-free in nvec_rx_completed() In nvec_rx_completed(), when an incomplete RX transfer is detected, nvec_msg_free() is called to return the message back to the pool by clearing its 'used' atomic flag. Immediately after this, the code accesses nvec->rx->data[0] to check the message type. Since nvec_msg_free() marks the pool slot as available via atomic_set(), any concurrent or subsequent call to nvec_msg_alloc() could claim that same slot and overwrite its data[] array. Reading nvec->rx->data[0] after freeing the message is therefore a use-after-free. Fix this by saving the message type byte before calling nvec_msg_free(), then using the saved value for the battery quirk check. | Aug 15, 2026 |
| CVE-2026-72488(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: soundwire: fix bug in sdw_add_element_group_count found by syzkaller The original implementation caused an out-of-bounds memory access in the sdw_add_element_group_count for-loop when i == num. for (i = 0; i <= num; i++) { if (rate == group->rates[i] && lane == group->lanes[i]) ... To fix this error, the function now checks for existing rate/lane entries in the group(a function parameter) using a for-loop before adding them. No functional changes apart from this fix. | Aug 15, 2026 |
| CVE-2026-72487(opens NVD record) | High | 7.7 | In the Linux kernel, the following vulnerability has been resolved: PCI: Check ROM header and data structure addr before accessing We meet a crash when running stress-ng on x86_64 machine: BUG: unable to handle page fault for address: ffa0000007f40000 RIP: 0010:pci_get_rom_size+0x52/0x220 Call Trace: <TASK> pci_map_rom+0x80/0x130 pci_read_rom+0x4b/0xe0 kernfs_file_read_iter+0x96/0x180 vfs_read+0x1b1/0x300 Our analysis reveals that the ROM space's start address is 0xffa0000007f30000, and size is 0x10000. Because of broken ROM space, before calling readl(pds), the pds's value is 0xffa0000007f3ffff, which is already pointed to the ROM space end, invoking readl() would read 4 bytes therefore cause an out-of-bounds access and trigger a crash. Fix this by adding image header and data structure checking. We also found another crash on arm64 machine: Unable to handle kernel paging request at virtual address ffff8000dd1393ff Mem abort info: ESR = 0x0000000096000021 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault The call trace is the same with x86_64, but the crash reason is that the data structure addr is not aligned with 4, and arm64 machine report "alignment fault". Fix this by adding alignment checking. [bhelgaas: shorten function names, wrap comments] | Aug 15, 2026 |
| CVE-2026-72486(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-adsp: fix UAF during device teardown When the SOF audio driver fails to initialize (e.g. firmware boot timeout), its devres unwind frees the snd_sof_dev object that the mailbox client (mtk-adsp-ipc) reaches via chan->cl->rx_callback. The mtk-adsp-mailbox shutdown clears the mailbox command registers but leaves the IRQ line unmasked, so a late interrupt can still queue a threaded handler after mbox_free_channel() had cleared chan->cl, and mbox_chan_received_data() would then trigger UAF: BUG: KASAN: slab-use-after-free in sof_ipc3_validate_fw_version sof_ipc3_validate_fw_version sof_ipc3_do_rx_work sof_ipc3_rx_msg mt8196_dsp_handle_request mtk_adsp_ipc_recv mbox_chan_received_data mtk_adsp_mbox_isr irq_thread_fn Freed by task ...: kfree devres_release_all really_probe ... (sof-audio-of-mt8196 probe failure) The crash was observed roughly three seconds after the failed probe. disable_irq() in shutdown and enable_irq() in startup. disable_irq() also waits for any in-flight interrupts, so by the time mbox_free_channel() proceeds to clear chan->cl no rx_callback can run. In addition, request the IRQ with IRQF_NO_AUTOEN so it stays masked between probe and the first client bind — otherwise an early interrupt can crash on chan->cl == NULL in mbox_chan_received_data(). | Aug 15, 2026 |
| CVE-2026-72485(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: coresight: platform: defer connection counter increment until alloc succeeds coresight_add_out_conn() increments nr_outconns before calling devm_krealloc_array() and again before devm_kmalloc(). If either allocation fails, the counter is already bumped while the corresponding array entry is NULL or uninitialized garbage. coresight_add_in_conn() has the same problem with nr_inconns and devm_krealloc_array(). In both cases the probe returns -ENOMEM, which causes coresight_get_platform_data() to call coresight_release_platform_data() for cleanup. That function iterates up to nr_outconns (or nr_inconns) entries and dereferences each pointer unconditionally, hitting the NULL or garbage entry and panicking instead of failing gracefully. Fix by moving the counter increments to after all allocations succeed, so the struct is always consistent on any error path. | Aug 15, 2026 |
| CVE-2026-72484(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: staging: most: video: avoid double free on video register failure comp_register_videodev() allocates a video_device with video_device_alloc() and releases it if video_register_device() fails. This can double free the video_device when __video_register_device() reaches device_register() and that call fails: video_register_device() -> __video_register_device() -> device_register() fails -> put_device(&vdev->dev) -> v4l2_device_release() -> vdev->release(vdev) -> video_device_release(vdev) comp_register_videodev() -> video_device_release(mdev->vdev) Use video_device_release_empty() while registering the device so that registration failure paths do not free mdev->vdev through vdev->release(). comp_register_videodev() then releases mdev->vdev exactly once on failure. Restore video_device_release() after successful registration so the registered device keeps its normal lifetime handling. This issue was found by a static analysis tool I am developing. | Aug 15, 2026 |
| CVE-2026-72483(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control() The `max3421_hub_control()` function handles USB hub class requests to the virtual root hub. In the `default` branches of both the `ClearPortFeature` and `SetPortFeature` switch statements, it modifies `max3421_hcd->port_status` by left shifting 1 by the request's `value` parameter. However, it does not validate whether this shift will exceed the width of `port_status`. So if a malicious userspace task with access to the root hub via /dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue` greater than or equal to 32, the left shift operation invokes shift-out-of-bounds undefined behavior. This results in arbitrary bit corruption of `port_status`, including the normally-immutable change bits, which can bypass internal state checks and confuse the hub status. Fix this by rejecting requests whose `value` exceeds the shift width before performing the shift. This issue was found using a KLEE-based symbolic execution tool for kernel drivers that I'm currently developing. | Aug 15, 2026 |
| CVE-2026-72482(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: gpib: fix double decrement of descriptor_busy in command_ioctl() commit d1857f8296dc ("gpib: fix use-after-free in IO ioctl handlers") introduced a descriptor_busy reference counter to pin struct gpib_descriptor across IO ioctl operations. In command_ioctl(), the error path inside the loop decrements descriptor_busy and breaks, but execution then falls through to the unconditional decrement after the loop, underflowing the counter to -1. This re-enables the use-after-free that the original fix was meant to prevent: a concurrent close_dev_ioctl() sees descriptor_busy == 0 on an actively-used descriptor and frees it. Remove the early decrement from the error path. The post-loop decrement already handles all exit paths, matching the correct pattern used in read_ioctl() and write_ioctl(). | Aug 15, 2026 |
| CVE-2026-72481(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: iio: magnetometer: ak8975: fix potential kernel stack memory leak Currently in the AK8975 driver there are four instances where potential uninitialized kernel stack memory leaks can occur. If i2c_smbus_read_i2c_block_data_or_emulated() returns a value less than the size of the buffer, uninitialized bytes are retained in the buffer and later the buffer is passed on to IIO buffers, potentially leaking memory to userspace. Fix this by adding checks whether the return value of the function is equal to the size of the buffer and subsequently if the value is lesser than zero to distinguish from a returned error code. | Aug 15, 2026 |
| CVE-2026-72480(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: iio: adc: xilinx-ams: fix out-of-bounds channel lookup in event handling ams_event_to_channel() may return a pointer past the end of dev->channels when no matching scan_index is found. This can lead to invalid memory access in ams_handle_event(). Add a bounds check in ams_event_to_channel() and return NULL when no channel is found. Also guard the caller to safely handle this case. | Aug 15, 2026 |
| CVE-2026-72479(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: iio: accel: mma8452: handle I2C read error(s) in mma8452_read() Currently, If i2c_smbus_read_i2c_block_data() fails but mma8452_set_runtime_pm_state() succeeds, mma8452_read() returns 0. As a result, the caller mma8452_read_raw() assumes the read was successful and proceeds to use a buffer containing uninitialized stack memory. Add proper checking of the I2C read return value and propagate errors to the caller. | Aug 15, 2026 |
| CVE-2026-72478(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: add bounds check to run_get_highest_vcn() run_get_highest_vcn() parses a packed NTFS mapping-pairs buffer without any length bound, relying solely on a 0x00 terminator to stop. A crafted $LogFile UpdateMappingPairs record whose embedded attribute contains mapping-pairs runs without a terminator causes the function to read past the slab allocation, triggering a KASAN slab-out-of-bounds read on mount. The sibling function run_unpack() received an analogous bounds-check in commit b62567bca474 ("ntfs3: add buffer boundary checks to run_unpack()"), but run_get_highest_vcn() was missed. Take a run_buf_size parameter and reject any run header whose payload would extend past the buffer end, mirroring the pattern used by run_unpack(). The caller in fslog.c passes the remaining attribute bytes after the mapping-pairs offset. KASAN report (on mainline v7.1 merge window HEAD): BUG: KASAN: slab-out-of-bounds in run_get_highest_vcn+0x3c0/0x410 Read of size 1 at addr ffff88800e2d5400 by task mount/72 Call Trace: run_get_highest_vcn+0x3c0/0x410 do_action.isra.0+0x3ba8/0x7b50 log_replay+0x9ddd/0x10200 ntfs_loadlog_and_replay+0x4ad/0x610 ntfs_fill_super+0x214a/0x4540 | Aug 15, 2026 |
| CVE-2026-72477(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: call _ntfs_bad_inode() when failing to rename It is safe to call _ntfs_bad_inode on live inodes since: commit 519b078998ce ("fs/ntfs3: Exclude call make_bad_inode for live nodes.") The WARN_ON was added when it wasn't safe by: commit d99208b91933 ("fs/ntfs3: cancle set bad inode after removing name fails") Replace the WARN_ON with a call to _ntfs_bad_inode() to prevent further operations on the inconsistent inode. | Aug 15, 2026 |
| CVE-2026-72476(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix possible use after free In dma_release_channel(), check chan->device->privatecnt after call dma_chan_put(). However, dma_chan_put() call dma_device_put() which could release the last reference of the device if the DMA provider is already gone and hence free it. Fixes it by moving dma_chan_put() after the check. | Aug 15, 2026 |
| CVE-2026-72475(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: dmaengine: dma-axi-dmac: Properly free struct axi_dmac_desc Use axi_dmac_free_desc() to free fully the descriptor at fail path when call axi_dmac_alloc_desc() in axi_dmac_prep_peripheral_dma_vec(). | Aug 15, 2026 |
| CVE-2026-72474(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: dmaengine: dma-axi-dmac: use DMA pool to manange DMA descriptor For architectures like Microblaze or arm64 (where this IP is used), DMA_DIRECT_REMAP is set which means that dma_alloc_coherent() might remap (and hence vmalloc()) some memory. This became visible in a design where dma_direct_use_pool() is not possible. With the above, when calling dma_free_coherent(), vunmap() would be called from softirq context and thus leading to a BUG(). To fix it, use a dma pool that is allocated in .device_alloc_chan_resources() and allocate blocks from it. The key point is that now dma_pool_free() is used in axi_dmac_free_desc() to free the blocks and that just frees the blocks from the pool in the sense they can be used again. In other words, no actual call to dma_free_coherent() happens. That only happens when destroying the pool in axi_dmac_free_chan_resources() which does not happen in any interrupt context. | Aug 15, 2026 |