Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
43,392 matching · page 132/868Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-74375(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix deadlock in read error recovery path raid1d and raid10d may resubmit a split md cloned bio while handling a read error. In this case, resubmitting the bio can lead to a deadlock if the array is suspended before md_handle_request() acquires an active_io reference via percpu_ref_tryget_live(). Since the cloned bio already holds an active_io reference, trying to acquire another reference via percpu_ref_tryget_live() can lead to a deadlock while the array is suspended. Fix this by using percpu_ref_get() for md cloned bios. | Aug 15, 2026 |
| CVE-2026-74374(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix error-path detection with md_cloned_bio() Detect the error path using md_cloned_bio() instead of relying on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be NULL or -1 after splitting and resubmitting a failed bio. As a result, the error path may not be recognized and memory allocations can incorrectly use GFP_NOIO instead of (GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under memory pressure. | Aug 15, 2026 |
| CVE-2026-74373(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix bio accounting for split md cloned bios Use md_cloned_bio() to control bio accounting instead of relying on r1bio_existed in raid1 or the io_accounting flag in raid10. The previous logic does not reliably reflect whether a bio is an md cloned bio. When a failed bio is split and resubmitted via bio_submit_split_bioset() on the error path, this can lead to either double accounting for md cloned bios, or missing accounting for bios returned from bio_submit_split_bioset() Fix this by using md_cloned_bio() to detect md cloned bios and skip accounting accordingly. | Aug 15, 2026 |
| CVE-2026-74372(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: raid1: fix nr_pending leak in REQ_ATOMIC bad-block error path In raid1_write_request(), each per-mirror loop iteration begins by incrementing rdev->nr_pending. If a REQ_ATOMIC write encounters a badblock within the requested range, the code jumps to err_handle without dropping the reference taken for the current mirror. err_handle's cleanup loop will only decrements for k < i and r1_bio->bios[k] is non-NULL. The current slot is therefore skipped, leaving its nr_pending reference leaked permanently. The reference prevents the rdev from ever being removed, since raid1_remove_conf() refuses to remove an rdev with nr_pending > 0. Fix this by calling rdev_dec_pending() before jumping to err_handle. | Aug 15, 2026 |
| CVE-2026-74371(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40 bytes, which was the layout before the addition of 'query.revision'), the kernel performs an out-of-bounds write. Fix this by propagating the user-provided attribute size 'uattr_size' down to the cgroup query handlers, and conditionally skipping writing the revision field to userspace when the provided buffer size is insufficient. query.revision in bpf_mprog_query is structurally identical to the cgroup case: a late tail field, written unconditionally. But the backward-compat hazard is not the same. The min-historical-size test is per command, and bpf_mprog_query only serves attach types that were born with revision in the struct: - tcx_prog_query -> BPF_TCX_INGRESS/EGRESS - netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER tcx, netkit, the revision field, and bpf_mprog_query itself all landed in the same v6.6 merge window (053c8e1f235d added the mprog query API + revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about revision. So for these commands the minimum legitimate struct already covers offset 56-64 — no old binary can be broken here. Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in 2017; revision write-back was bolted on years later (120933984460). That path has a real population of pre-revision callers. | Aug 15, 2026 |
| CVE-2026-74370(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: liveupdate: fix TOCTOU race in luo_session_retrieve() Extend the scope of the rwsem_read lock in luo_session_retrieve() to overlap with the acquisition of the session mutex. This prevents a concurrent thread from releasing and freeing the session between the lookup and the mutex lock. | Aug 15, 2026 |
| CVE-2026-74369(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: liveupdate: fix u-a-f in luo_file_unpreserve_files() and luo_file_finish() In luo_file_unpreserve_files() and luo_file_finish(), reorder module_put() and xa_erase() to ensure the file handler module remains pinned while its operations are being accessed. Specifically, luo_get_id() dereferences fh->ops->get_id, so the module reference must be held until after xa_erase() (which calls luo_get_id) completes. For luo_file_finish(), this requires moving the module_put() call out of the luo_file_finish_one() helper and into the main loop of luo_file_finish() itself. | Aug 15, 2026 |
| CVE-2026-74368(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic() In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the NWIFI header length is invalid, causing the function to abort early with -EINVAL. When this happens, the error propagates to ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it to NULL. As a result, the corresponding MSDU is no longer referenced by the defragmentation path and is never freed. This leads to a memory leak for the affected MSDU on this error path. Proper cleanup is required to ensure the MSDU is released when header validation fails during TKIP MIC verification. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | Aug 15, 2026 |
| CVE-2026-74367(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix inconsistent arvif state in vdev_create error paths ath12k_mac_vdev_create() has three error path issues that leave arvif in an inconsistent state: 1. When ath12k_wmi_vdev_create() fails, the function returns directly without clearing arvif->ar, which was already set before the WMI call. Subsequent code checking arvif->ar to determine vdev readiness will see a non-NULL value despite no vdev existing in firmware. 2. When ath12k_wmi_send_peer_delete_cmd() fails in err_peer_del, the code jumped to err: skipping the DP peer cleanup and vdev rollback, leaving num_created_vdevs, vdev maps and arvif list membership live. 3. When ath12k_wait_for_peer_delete_done() fails, the code jumped to err_vdev_del: skipping the DP peer cleanup. Fix by changing the ath12k_wmi_vdev_create() failure to goto err instead of returning directly, routing both err_peer_del failure paths through err_dp_peer_del: for proper DP peer and vdev rollback, and consolidating the arvif state cleanup at err:. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | Aug 15, 2026 |
| CVE-2026-74366(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL deref in change_sta_links for unready link _ieee80211_set_active_links() calls _ieee80211_link_use_channel() for each newly-added link and WARN_ON_ONCE()s if it fails. The call uses assign_on_failure=true, which allows mac80211 to continue despite driver failures, but when a mac80211-level channel validation fails (e.g., combinations check, DFS, or no available radio), drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create() is only called from that path, arvif->is_created remains false and arvif->ar remains NULL for the failed link. The subsequent drv_change_sta_links() call reaches ath12k_mac_op_change_sta_links(), which allocates an arsta and sets ahsta->links_map |= BIT(link_id) for the broken link before checking whether the link is ready. When the vdev was never created, only station_add() is skipped, but the link remains in links_map. Any subsequent operation iterating links_map and dereferencing arvif->ar without a NULL check will crash. Two observed examples are NULL deref in ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key() when wpa_supplicant installs PTK keys. BUG: Unable to handle kernel NULL pointer dereference at 0x00000000 pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k] Call trace: ath12k_mac_station_post_remove+0x40/0xe8 [ath12k] ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k] drv_sta_state+0x100/0xbd8 [mac80211] __sta_info_destroy_part2+0x148/0x178 [mac80211] ieee80211_set_disassoc+0x500/0x678 [mac80211] BUG: Unable to handle kernel NULL pointer dereference at 0x00000000 pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k] Call trace: ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k] drv_set_key+0x70/0x100 [mac80211] ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211] ieee80211_add_key+0x16c/0x2ac [mac80211] nl80211_new_key+0x138/0x280 [cfg80211] Fix this by checking arvif->is_created before calling ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from entering links_map, so all subsequent operations iterating the bitmap are protected. The reliability of arvif->is_created across all error paths is ensured by the preceding patch. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | Aug 15, 2026 |
| CVE-2026-74365(opens NVD record) | High | 7.3 | In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Handle preemption in BTT lane acquisition BTT lanes serialize access to per-lane metadata and workspace state during BTT I/O. The btt-check unit test reports data mismatches during BTT writes due to a race in lane acquisition that can lead to silent data corruption. The existing lane model uses a spinlock together with a per-CPU recursion count. That recursion model stopped being valid after BTT lanes became preemptible: another task can run on the same CPU, observe a non-zero recursion count, bypass locking, and use the same lane concurrently. BTT lanes are also held across arena_write_bytes() calls. That path reaches nsio_rw_bytes(), which flushes writes with nvdimm_flush(). Some provider flush callbacks can sleep, making a spinlock the wrong primitive for the lane lifetime. Replace the spinlock-based recursion model with a dynamically allocated per-lane mutex array and take the lane lock unconditionally. Add might_sleep() to catch any future atomic-context caller. Found with the ndctl unit test btt-check.sh. | Aug 15, 2026 |
| CVE-2026-74364(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: bpf: Reject exclusive maps as inner maps in map-in-map An exclusive map (created with excl_prog_hash) is bound to a single program by hash: check_map_prog_compatibility() refuses to load any program whose digest does not match map->excl_prog_sha. That check only runs for maps a program references directly, i.e. its used_maps. A map reached at runtime through a map-of-maps is never in used_maps, and bpf_map_meta_equal() does not consider excl_prog_sha, so an exclusive map can be inserted into a non-exclusive outer map and then looked up and mutated by an unrelated program, bypassing the exclusivity guarantee. For the signed loader this defeats the metadata map exclusivity check added in the signed loader: the cached map->sha[] is validated against the signed hash while another program on a hostile host rewrites the frozen map's contents through the outer map. | Aug 15, 2026 |
| CVE-2026-74363(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning htab with internal structs") moved inode cleanup from ->free_inode() into ->destroy_inode() to avoid sleeping in RCU context when calling bpf_any_put(). However this removed the RCU delay on freeing the inode itself and the cached symlink body (i_link), both of which can be accessed by RCU pathwalk (pick_link, may_lookup etc.). This causes a use-after-free when a concurrent unlinkat() drops the last inode reference and destroy_inode() frees the inode immediately, while another task is still walking the path in RCU mode and reads inode->i_opflags (offset +2) inside current_time() -> is_mgtime(). KASAN reports: BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313 Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags) The rules (per Al Viro): ->destroy_inode() called immediately, can sleep, use for blocking cleanup e.g. bpf_any_put() ->free_inode() called after RCU grace period, use for freeing inode and anything RCU-accessible e.g. i_link Fix: split the two concerns properly: - keep bpf_any_put() in bpf_destroy_inode() since it is blocking and needs to run promptly - introduce bpf_free_inode() to handle kfree(i_link) and free_inode_nonrcu() with proper RCU delay, preventing the UAF | Aug 15, 2026 |
| CVE-2026-74362(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ext2: fix ignored return value of generic_write_sync() Fix ext2_dio_write_iter() to propagate the error returned by generic_write_sync() instead of silently discarding it, which could cause write(2) to return success to userspace on O_SYNC/O_DSYNC files even when the sync failed. The correct pattern, already used in ext2_dax_write_iter() in the same file and in ext4, xfs, f2fs among others, is: if (ret > 0) ret = generic_write_sync(iocb, ret); Found by Linux Verification Center (linuxtesting.org) with SVACE. [JK: Reflect also filemap_write_and_wait() return value] | Aug 15, 2026 |
| CVE-2026-74361(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: nvme: fix FDP fdpcidx bounds check The fdpcidx bounds check sets n = NUMFDPC + 1 but used > instead of >=, incorrectly accepting fdp_idx when it equals n (i.e. NUMFDPC + 1). | Aug 15, 2026 |
| CVE-2026-74360(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: bpf: Reject exclusive maps for bpf_map_elem iterators Exclusive maps (aka excl_prog_hash) are meant to be reachable only from the single program whose hash matches. This is enforced by check_map_prog_compatibility() when the map is referenced from a program such as signed BPF loaders. A bpf_map_elem iterator, however, binds its target map at attach time in bpf_iter_attach_map() instead of referencing it from the program, so the exclusivity check is never reached. On top of that, the iterator exposes the map value as a writable buffer. | Aug 15, 2026 |
| CVE-2026-74359(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: configfs_lookup(): don't leave ->s_dentry dangling on failure Normally ->s_dentry is cleared when dentry it's pointing to becomes negative (on eviction, realistically). However, that only happens if dentry gets to be positive in the first place; in case of inode allocation failure dentry never becomes positive, so ->d_iput() is not called at all. We do part of what normally would've been done by configfs_d_iput() (dropping the reference to configfs_dirent) manually, but we do not clear ->s_dentry there. Sloppy as it is, it does not matter in case of configfs_create_{dir,link}() - there configfs_dirent does not survive dropping the sole reference to it. However, for configfs_lookup() it *does* survive, with a dangling pointer to soon to be freed dentry sitting it its ->s_dentry. Subsequent getdents(2) in that directory will end up dereferencing that pointer in order to pick the inode number. Use after free... This is the minimal fix; the right approach is to set the linkage between dentry and configfs_dirent only after we know that we have an inode, but that takes more surgery and the bug had been there since 2006, so... | Aug 15, 2026 |
| CVE-2026-74358(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ext4: fix fast commit wait/wake bit mapping on 64-bit On 64-bit, ext4 dynamic inode states live in the upper half of i_flags, and ext4_test_inode_state() applies the corresponding +32 offset. The fast-commit wait and wake paths open-coded the wait key with the raw EXT4_STATE_* value. Add small helpers for the state wait word and bit, and use them for the FC_COMMITTING and FC_FLUSHING_DATA waits so the wait key follows the same mapping as the state helpers. | Aug 15, 2026 |
| CVE-2026-74357(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix KASAN slab-out-of-bounds in amdgpu_coredump ring dump The ring content dump in amdgpu_coredump() uses two separate loops over adev->rings[]: the first counts rings with unsignalled fences to size the allocation, and the second copies ring data into the allocated buffers. Both loops use the same condition to skip rings: atomic_read(&ring->fence_drv.last_seq) == ring->fence_drv.sync_seq Because last_seq is an atomic that is updated concurrently by the fence signalling path, additional rings may appear unsignalled in the second loop that were signalled during the first. When this happens, idx exceeds the allocated ring_count and the store to coredump->rings[idx] writes past the end of the kcalloc-ed buffer. This was found during IGT stressful test amd_queue_reset which triggers random GPU resets. The OVERSIZE subtest (CMD_STREAM_EXEC_INVALID_PACKET_LENGTH_OVERSIZE on GFX ring) provokes a ring timeout and subsequent coredump, which hits the race between the counting and copying loops. The failure is non-deterministic and depends on fence signalling timing during the reset. KASAN log: BUG: KASAN: slab-out-of-bounds in amdgpu_coredump+0x1274/0x12f0 [amdgpu] Write of size 4 at addr ffff888106154258 by task kworker/u128:5/23625 CPU: 16 UID: 0 PID: 23625 Comm: kworker/u128:5 Not tainted 6.19.0+ #35 Workqueue: amdgpu-reset-dev drm_sched_job_timedout [gpu_sched] Call Trace: <TASK> dump_stack_lvl+0xa5/0x110 print_report+0xd1/0x660 kasan_report+0xf3/0x130 __asan_report_store4_noabort+0x17/0x30 amdgpu_coredump+0x1274/0x12f0 [amdgpu] amdgpu_job_timedout+0xef0/0x16c0 [amdgpu] drm_sched_job_timedout+0x194/0x5c0 [gpu_sched] process_one_work+0x84b/0x1990 worker_thread+0x6b8/0x11b0 </TASK> Allocated by task 23625: kasan_save_stack+0x39/0x70 __kasan_kmalloc+0xc3/0xd0 __kmalloc_noprof+0x2ec/0x910 amdgpu_coredump+0x5c5/0x12f0 [amdgpu] amdgpu_job_timedout+0xef0/0x16c0 [amdgpu] The buggy address belongs to the object at ffff888106154200 which belongs to the cache kmalloc-rnd-09-96 of size 96 The buggy address is located 16 bytes to the right of allocated 72-byte region [ffff888106154200, ffff888106154248) 72 bytes = 3 * sizeof(struct amdgpu_coredump_ring), so ring_count was 3 but idx reached 3+, writing ring_index (at struct offset 16) 16 bytes past the allocation. Fix by adding an idx < ring_count guard to the copy loop so it cannot exceed the allocated count even when the fence state changes between the two passes. | Aug 15, 2026 |
| CVE-2026-74356(opens NVD record) | High | 7.4 | In the Linux kernel, the following vulnerability has been resolved: vhost: fix vhost_get_avail_idx for a non empty ring vhost_get_avail_idx is supposed to report whether it has updated vq->avail_idx. Instead, it returns whether all entries have been consumed, which is usually the same. But not always - in drivers/vhost/net.c and when mergeable buffers have been enabled, the driver checks whether the combined entries are big enough to store an incoming packet. If not, the driver re-enables notifications with available entries still in the ring. The incorrect return value from vhost_get_avail_idx propagates through vhost_enable_notify and causes the host to livelock if the guest is not making progress, as vhost will immediately disable notifications and retry using the available entries. This goes back to commit d3bb267bbdcb ("vhost: cache avail index in vhost_enable_notify()") which changed vhost_enable_notify() to compare the freshly read avail index against vq->last_avail_idx instead of the previously cached vq->avail_idx. Commit 7ad472397667 ("vhost: move smp_rmb() into vhost_get_avail_idx()") then carried over the same comparison when refactoring vhost_enable_notify() to call the unified vhost_get_avail_idx(). The obvious fix is to make vhost_get_avail_idx do what the comment says it does and report whether new entries have been added. | Aug 15, 2026 |
| CVE-2026-74355(opens NVD record) | High | 8.2 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix RB-tree corruption in probe error path The info->node RB-tree member is zero-initialized via kzalloc. If a device does not support ATS, the device_rbtree_insert() call is skipped. If a subsequent probe step fails, the error path jumps to device_rbtree_remove(), which misinterprets the zeroed node as a tree root and corrupts the device RB-tree. Fix this by explicitly initializing the RB-node as empty using RB_CLEAR_NODE() during initialization and guarding the removal with RB_EMPTY_NODE(). | Aug 15, 2026 |
| CVE-2026-74354(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: bpf: Take mmap_lock in zap_pages() zap_vma_range() requires the owning mm's mmap_lock to be held. Taking mmap_read_lock under arena->lock would AB-BA against arena_vm_close() and arena_map_mmap(), both of which run with mmap_write_lock held and then acquire arena->lock. Instead drop arena->lock, mmget_not_zero() the vma's mm, take mmap_read_lock, and re-resolve the vma via find_vma() since it may have been unmapped or replaced while waiting. Track processed vmls with a per-call generation in vml->zap_gen and serialize zap_pages() callers with a new arena->zap_mutex so concurrent callers on different uaddr ranges do not mark each other's vmls processed before the zap is done. | Aug 15, 2026 |
| CVE-2026-74353(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: always resume_all after suspend_all Need to restore any good queues even if the suspend_all failed for some. Always run remove_queue as that will schedule a GPU reset is removing the queue fails. v2: move resume_all after remove | Aug 15, 2026 |
| CVE-2026-74352(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: of: reserved_mem: avoid post-init UAF when alloc_reserved_mem_array() fails The global pointer 'reserved_mem' continues to reference the reserved_mem_array which lives in __initdata if alloc_reserved_mem_array() fails. of_reserved_mem_lookup() is exported for post-init use, that would dereference freed memory and trigger a use-after-free. So reset reserved_mem_count to 0 when alloc_reserved_mem_array() fails. | Aug 15, 2026 |
| CVE-2026-74351(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ocfs2: rebase copied fsdlm LVB pointers in locking_state The locking_state debugfs iterator snapshots struct ocfs2_lock_res by value under ocfs2_dlm_tracking_lock and later formats that copy in ocfs2_dlm_seq_show(). That is fine for the inline fields, but the userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still points into the original lockres owner, so teardown can free that container before the debugfs dump walks the raw LVB bytes. Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw LVB. The seq snapshot already carries the inline LVB storage reserved in struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes without borrowing the original lockres lifetime. The buggy scenario involves two paths, with each column showing the order within that path: locking_state reader: lockres teardown: 1. ocfs2_dlm_seq_start()/next() 1. file release or another owner copies struct ocfs2_lock_res teardown reaches 2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free() the copied row 2. the lockres is removed from the 3. ocfs2_dlm_lvb() follows the tracking list copied sb_lvbptr 3. the owner frees the original lockres container Validation reproduced this kernel report: KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430 RIP: 0033:0x7f8ec4b1e29d The buggy address belongs to the object at ffff88810a1e0800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 368 bytes inside of freed 1024-byte region [ffff88810a1e0800, ffff88810a1e0c00) Read of size 1 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 seq_read_iter+0x29d/0x790 seq_read+0x20a/0x280 find_held_lock+0x2b/0x80 rcu_read_unlock+0x18/0x70 full_proxy_read+0x9e/0xd0 vfs_read+0x12c/0x590 ksys_read+0xd2/0x170 do_user_addr_fault+0x65a/0x890 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 ocfs2_file_open+0x13e/0x300 do_dentry_open+0x233/0x7f0 vfs_open+0x5a/0x1b0 path_openat+0x66d/0x1540 do_file_open+0x186/0x2b0 do_sys_openat2+0xce/0x150 __x64_sys_openat+0xd0/0x140 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 ocfs2_file_release+0x138/0x260 __fput+0x1df/0x4b0 fput_close_sync+0xd2/0x170 __x64_sys_close+0x55/0x90 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f | Aug 15, 2026 |
| CVE-2026-74350(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path. Validation reproduced this kernel report: KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0 RIP: 0033:0x7f5c6d859aa7 Read of size 3905 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x19f/0x330 (?:?) kasan_report+0xe0/0x110 (?:?) kasan_check_range+0x105/0x1b0 (?:?) __asan_memcpy+0x23/0x60 (?:?) filemap_read_folio+0x27/0xe0 (?:?) filemap_read_folio+0x35/0xe0 (?:?) do_read_cache_folio+0x138/0x230 (?:?) __page_get_link+0x26/0x110 (?:?) page_get_link+0x2e/0x70 (?:?) vfs_readlink+0x15e/0x250 (?:?) touch_atime+0x4d/0x370 (?:?) do_readlinkat+0x186/0x200 (?:?) do_user_addr_fault+0x65a/0x890 (?:?) __x64_sys_readlink+0x46/0x60 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | Aug 15, 2026 |
| CVE-2026-74349(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject FITRIM ranges shorter than a cluster ocfs2_trim_mainbm() trims the global bitmap in cluster units, but its too-short range validation only checks sb->s_blocksize. On filesystems with a cluster size larger than the block size, a FITRIM range that is at least one block but shorter than one cluster is accepted and shifted down to len == 0. The later start + len - 1 and len -= ... arithmetic then underflows and can drive trimming past the requested range. Reject ranges shorter than s_clustersize instead. That preserves the existing -EINVAL behavior for requests that cannot discard even one allocation unit and keeps zero-cluster trims out of the group walk. | Aug 15, 2026 |
| CVE-2026-74348(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: require a ref for locking_state debugfs open debug_lockres_open() copies inode->i_private into struct debug_lockres and debug_lockres_release() later drops that pointer with dlm_put(). That only works if open successfully pins the struct dlm_ctxt. Today open calls dlm_grab(dlm) but ignores its return value. Once the last domain unregister has removed the context from dlm_domains, dlm_grab() returns NULL, yet open still stores the raw pointer and returns success. The later release path is outside the debugfs removal barrier, so it can call dlm_put() after dlm_free_ctxt_mem() has freed the context. KASAN reports this as a slab-use-after-free in dlm_put() called from debug_lockres_release(). Fail the open when dlm_grab() cannot acquire the reference and unwind the seq_file private state before returning. That keeps locking_state from handing out a file descriptor whose release path does not own the dlm_ctxt. The buggy scenario involves two paths, with each column showing the order within that path: locking_state debugfs open: last domain unregister: 1. debug_lockres_open() reads 1. dlm_unregister_domain() calls inode->i_private. dlm_complete_dlm_shutdown(). 2. debug_lockres_open() calls 2. shutdown removes the dlm_ctxt from dlm_grab(dlm) and gets NULL. dlm_domains. 3. open still stores the raw dlm 3. final teardown reaches pointer in dl->dl_ctxt and dlm_free_ctxt_mem() and frees it. returns success. 4. debug_lockres_release() later calls dlm_put(dl->dl_ctxt). Validation reproduced this kernel report: KASAN slab-use-after-free in dlm_put+0x82/0x200 RIP: 0033:0x7f4d349bc9e0 The buggy address belongs to the object at ffff888103a3c000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 816 bytes inside of freed 2048-byte region [ffff888103a3c000, ffff888103a3c800) Write of size 4 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xd0/0x630 (?:?) dlm_put+0x82/0x200 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x188/0x2f0 (?:?) kasan_report+0xe4/0x120 (?:?) kasan_check_range+0x105/0x1b0 (?:?) debug_lockres_release+0x53/0x80 (fs/ocfs2/dlm/dlmdebug.c:587) dlm_put+0x9/0x200 (?:?) debug_lockres_release+0x5c/0x80 (fs/ocfs2/dlm/dlmdebug.c:587) full_proxy_release+0x67/0x90 (?:?) __fput+0x1df/0x4b0 (?:?) do_raw_spin_lock+0x10f/0x1b0 (?:?) fput_close_sync+0xd2/0x170 (?:?) __x64_sys_close+0x55/0x90 (?:?) do_syscall_64+0x10c/0x640 (arch/x86/entry/syscall_64.c:87) irqentry_exit+0xac/0x6e0 (?:?) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) Freed by task stack: kasan_save_stack+0x33/0x60 (?:?) kasan_save_track+0x14/0x30 (?:?) kasan_save_free_info+0x3b/0x60 (?:?) __kasan_slab_free+0x5f/0x80 (?:?) kfree+0x30f/0x580 (?:?) dlm_put+0x1ce/0x200 (?:?) dlm_unregister_domain+0xf6/0xb30 (?:?) o2cb_cluster_disconnect+0x6b/0x90 (?:?) ocfs2_cluster_disconnect+0x41/0x70 (?:?) ocfs2_dlm_shutdown+0x1c4/0x220 (?:?) ocfs2_dismount_volume+0x38a/0x550 (?:?) generic_shutdown_super+0xc3/0x220 (?:?) kill_block_super+0x29/0x60 (?:?) deactivate_locked_super+0x66/0xe0 (?:?) cleanup_mnt+0x13d/0x210 (?:?) task_work_run+0xfa/0x170 (?:?) exit_to_user_mode_loop+0xd6/0x430 (?:?) do_syscall_64+0x3cb/0x640 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | Aug 15, 2026 |
| CVE-2026-74347(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount Add a refcount for struct nf_ct_timeout which is used by ct extension to set the custom ct timeout policy, this tells us that the ct timeout is being used by a conntrack entry. When the last conntrack entry drops the refcount on the ct timeout, the ct timeout is released. Remove the refcount for control plane which controls if the ruleset refers to the timeout policy. After this update, it is possible to remove the ct timeout policy from nfnetlink_cttimeout immediately. This is for simplicity not to handle two refcounts on a single object. Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just hold a reference to the nf_ct_timeout object until packet is reinjected, since this is part of the ct extension, this will be released by the time the conntrack is freed. nf_ct_untimeout() is still called to clean up in a best effort basis: the ct timeout on existing entries gets removed when the ct timeout goes away, but as long as the iptables ruleset still refers to the ct timeout through a template, new conntracks may keep attaching it and extend its lifetime until the rule is removed. nf_ct_untimeout() is not called anymore from module removal path, this is unlikely to find timeouts give module refcount is bumped, and the new refcount already tracks the ct timeout policy use so it is released when unused. | Aug 15, 2026 |
| CVE-2026-74346(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix OOB read during CQ MR registration Sashiko pointed out an unrelated bug during a previous patch: https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com This change fixes the bug by eliminating the cqmr->split field which was not being set properly and instead just checks the CQ resize feature flag directly. The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE is set, but it was not being set until CQ creation time, which is _after_ CQ memory registration (the only other place where it is referenced). As a result, it would always be false during MR registration and would therefore cause irdma_handle_q_mem to populate cqmr->shadow even for GEN_2 HW and beyond: cqmr->shadow = (dma_addr_t)arr[req->cq_pages]; The issue is that for GEN_2 and beyond, req->cq_pages may be exactly equal to iwmr->page_cnt and therefore equal to the size of arr, which would cause an OOB read by one. | Aug 15, 2026 |
| CVE-2026-74345(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix endpoint/socket association handling Disassociating a socket from an endpoint via siw_socket_disassoc() may release the last reference on that endpoint and free it. Therefore, don't clear the endpoints socket pointer after calling that function, but within. This fixes a: BUG: KASAN: slab-use-after-free in siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1053 drivers/infiniband/sw/siw/siw_cm.c:1075) which occurred after processing a malformed MPA request during connection establishment, causing the new endpoint to be closed. | Aug 15, 2026 |
| CVE-2026-74344(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: bpf: Clear rb node linkage when freeing bpf_rb_root bpf_rb_root_free() detaches the root by copying the current rb_root_cached and then replacing the live root with RB_ROOT_CACHED. It then walks the copied root and drops each object contained in the tree. This leaves the rb node state intact while dropping the object. If the object is refcounted and survives the drop, its bpf_rb_node_kern still contains an owner pointer to the freed root and stale rb tree linkage. If a later bpf_rb_root allocation reuses the same address, bpf_rbtree_remove() can incorrectly pass the owner check and call rb_erase_cached() on a node whose rb pointers belong to the old tree. Mirror the list draining behavior by marking nodes as busy while the root is being detached, then clear the rb node and release the owner before dropping the containing object. This makes surviving nodes unowned and safe to reject from remove or accept for a later add. | Aug 15, 2026 |
| CVE-2026-74343(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: kernfs: fix xattr race condition with multiple superblocks Multiple superblocks with different namespaces can share the same kernfs_node when kernfs_test_super() finds a matching root but different namespace. This means multiple inodes from different superblocks can reference the same kernfs_node->iattr->xattrs structure. The VFS layer only holds per-inode locks during xattr operations, which is insufficient to serialize concurrent xattr modifications on the shared kernfs_node. This can lead to race conditions in simple_xattr_set() where the lookup->replace/remove sequence is not atomic with respect to operations from other superblocks. Fix this by protecting xattr operations with the existing hashed kernfs_locks->open_file_mutex[] array, which is already used to protect per-node open file data. The hashed mutex array provides scalable per-node serialization (scaled by CPU count, up to 1024 locks on 32+ CPU systems) with zero memory overhead. Changes: - Rename open_file_mutex[] to node_mutex[] to reflect dual purpose - Add kernfs_node_lock_ptr() and kernfs_node_lock() helpers - Protect simple_xattr_set() calls in kernfs_xattr_set() and kernfs_vfs_user_xattr_set() with the hashed mutex - Update file.c to use new helpers via compatibility wrappers - Update documentation to explain the extended lock usage | Aug 15, 2026 |
| CVE-2026-74342(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: kernfs: link kn to its parent before the LSM init hook After commit 12e9e3cd03b5 ("simpe_xattr: use per-sb cache"), kernfs_xattr_set() and kernfs_xattr_get() compute the cache via kernfs_root(kn) before any other check. kernfs_root(kn) walks kn->__parent first and falls back to kn->dir.root, both of which are NULL on a freshly kmem_cache_zalloc()'d kn. kn->__parent was being set in kernfs_new_node() after __kernfs_new_node() returned, and kn->dir.root is set even later by kernfs_create_dir_ns() / kernfs_create_empty_dir(). The LSM kernfs_init_security hook is invoked from inside __kernfs_new_node(), before either field has been initialized. selinux_kernfs_init_security() ends with kernfs_xattr_set(kn, XATTR_NAME_SELINUX, ...). kernfs_root(kn) then returns NULL, and &((struct kernfs_root *)NULL)->xa_cache evaluates to offsetof(struct kernfs_root, xa_cache) which faults: BUG: kernel NULL pointer dereference, address: 00000000000000e0 RIP: 0010:simple_xattr_set+0x27/0x8b0 Call Trace: kernfs_xattr_set+0x63/0xb0 selinux_kernfs_init_security+0x13b/0x270 security_kernfs_init_security+0x36/0xc0 __kernfs_new_node+0x182/0x290 kernfs_new_node+0x80/0xc0 kernfs_create_dir_ns+0x2b/0xa0 cgroup_create+0x116/0x380 cgroup_mkdir+0x7c/0x1a0 Reproduces deterministically at PID 1 (systemd) on an SELinux-enabled distro. The first cgroup mkdir under /sys/fs/cgroup with a labelled parent panics the kernel. The LSM hook's contract is that the kn_dir argument is the parent of the new kn, so kn->__parent should already point at kn_dir when the hook runs. Move kernfs_get(parent) and rcu_assign_pointer of kn->__parent from kernfs_new_node() into __kernfs_new_node() right before the security hook, and unwind the parent reference on the err_out4 path. kernfs_root(kn) then takes its parent branch during the hook and returns parent->dir.root, which is the correct root. This also closes the same-shape latent bug in kernfs_xattr_get() (which today is hidden only by kernfs_iattrs_noalloc() returning NULL on a fresh kn). | Aug 15, 2026 |
| CVE-2026-74341(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix heap overflow from oversized firmware HAL response The firmware response dispatcher copies all synchronous HAL responses into the 4096-byte hal_buf without validating the response length. A response exceeding WCN36XX_HAL_BUF_SIZE causes a heap buffer overflow with firmware-controlled content. Add a bounds check on the response length. | Aug 15, 2026 |
| CVE-2026-74340(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix OOB read from firmware count in PRINT_REG_INFO indication The firmware-controlled rsp->count field is used as the loop bound for indexing into the flexible rsp->regs[] array without validation against the message length. A count exceeding the actual data causes out-of- bounds reads from the heap-allocated message buffer. Add a check that count fits within the received message. | Aug 15, 2026 |
| CVE-2026-74339(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Clear variable event pointer on read snd_seq_read() copies a queued variable-length event header to userspace before expanding the payload. Queued variable-length events use SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first extension cell. The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the copy, but it leaves data.ext.ptr untouched. A userspace sequencer client can therefore write a direct variable event to itself and read back the extension-cell kernel address from the returned header. Clear the temporary header pointer before copy_to_user(). The original queued event remains unchanged and is still passed to snd_seq_expand_var_event(), so payload expansion keeps using the internal chain. | Aug 15, 2026 |
| CVE-2026-74338(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: bpf: Reject sleepable BPF_LSM_CGROUP programs at load time The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should not attach any sleepable BPF programs there. Add support to the verifier to explicitly reject attempts to load sleepable BPF programs destined for LSM cgroup attachment. Without this, we get the following splat from a BPF_LSM_CGROUP program marked BPF_F_SLEEPABLE attached to file_open when it calls bpf_get_dentry_xattr(): BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 34317, name: load preempt_count: 0, expected: 0 RCU nest depth: 2, expected: 0 Call Trace: down_read+0x76/0x480 ext4_xattr_get+0x11f/0x700 __vfs_getxattr+0xf0/0x150 bpf_get_dentry_xattr+0xbb/0xf0 bpf_prog_e76a298dac9218c6_test_open+0x6a/0x85 __cgroup_bpf_run_lsm_current+0x326/0x840 bpf_trampoline_6442534646+0x62/0x14d security_file_open+0x34/0x60 do_dentry_open+0x340/0x1260 vfs_open+0x7a/0x440 path_openat+0x1bac/0x30a0 libbpf provides a .s named section variant for every sleepable program type except lsm_cgroup, reflecting that per-cgroup LSM programs are intended to only run in a non-sleepable context. The above splat was obtained by bypassing libbpf by using bpf(2) directly. | Aug 15, 2026 |
| CVE-2026-74337(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NMI/tracepoint re-entry deadlock on lru locks NMI and tracepoint BPF programs can re-enter the per-CPU or global LRU lock that bpf_lru_pop_free()/push_free() already hold on the same CPU, AA-deadlocking. Lockdep reports "inconsistent {INITIAL USE} -> {IN-NMI}" on &l->lock (syzbot c69a0a2c816716f1e0d5) and "possible recursive locking detected" on &loc_l->lock (syzbot 18b26edb69b2e19f3b33). Prior trylock and rqspinlock based fixes (see links) were nacked because compromised on reliability. This patch converts every LRU lock site to rqspinlock_t and adds a recovery path for some failure windows to avoid node leaks. Failure recovery: - *_pop_free top-level: return NULL; prealloc_lru_pop() already treats that as no-free-element (-ENOMEM). - Cross-CPU steal: skip the victim's locked loc_l, try next CPU. - Post-steal local lock fail: publish stolen node to lockless per-CPU free_llist; next pop on this CPU picks it up. - push_free fail: mark node pending_free=1. __local_list_flush(), __local_list_pop_pending() reclaim the node from pending_list. __bpf_lru_list_shrink_inactive() reclaims the node from inactive list. Nodes from active list are reclaimed by __bpf_lru_list_shrink() or after __bpf_lru_list_rotate_active() demotes it to the inactive. | Aug 15, 2026 |
| CVE-2026-74336(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bound S1G TIM PVB walk to the TIM element ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a received TIM element. The TIM is handed in as the element payload: ieee802_11_parse_elems_full() stores elems->tim = elem->data and elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes are [tim, tim + tim_len). When walking the encoded blocks the function passes the walker an end sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <= end) and dereferences ptr (and the per-mode ieee80211_s1g_len_*() helpers read *ptr), so it can read up to two bytes beyond the TIM element -- an out-of-bounds read of adjacent skb/heap data when the TIM is the last element in the frame. The +2 appears to account for the element id/len header, but tim already points past that header at the element payload, so the addend is wrong. Pass the correct element end, (const u8 *)tim + tim_len. | Aug 15, 2026 |
| CVE-2026-74335(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL pointer dereference in bpf_task_from_vpid() bpf_task_from_vpid() looks up a task in the pid namespace of the current task, via find_task_by_vpid(): find_task_by_vpid(vpid) find_task_by_pid_ns(vpid, task_active_pid_ns(current)) find_pid_ns(nr, ns) -> idr_find(&ns->idr, nr) cgroup_skb programs run in softirq, which may interrupt a task that is itself in do_exit(). Once that task has passed exit_notify() -> release_task() -> __unhash_process(), its thread_pid is cleared, so task_active_pid_ns(current) returns NULL and find_pid_ns() dereferences &NULL->idr: BUG: kernel NULL pointer dereference, address: 0000000000000050 RIP: 0010:idr_find+0x11/0x30 lib/idr.c:176 Call Trace: <IRQ> find_pid_ns kernel/pid.c:370 [inline] find_task_by_pid_ns+0x3b/0xe0 kernel/pid.c:485 bpf_task_from_vpid+0x5b/0x200 kernel/bpf/helpers.c:2916 bpf_prog_run_array_cg+0x17e/0x530 kernel/bpf/cgroup.c:81 __cgroup_bpf_run_filter_skb+0x12b/0x250 kernel/bpf/cgroup.c:1612 sk_filter_trim_cap+0x1dc/0x4c0 net/core/filter.c:148 tcp_v4_rcv+0x18d1/0x2200 net/ipv4/tcp_ipv4.c:2223 </IRQ> <TASK> do_exit+0xa63/0x1270 kernel/exit.c:1010 get_signal+0x141c/0x1530 kernel/signal.c:3037 Bail out when current has no pid namespace. | Aug 15, 2026 |
| CVE-2026-74334(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: Fix locking when accessing mr->pd Sashiko points out that, due to rereg_mr, the PD is actually variable and all the touches in nldev are racy. Use mr->device instead of mr->pd->device. Getting the PD restrack ID is more tricky. To avoid disturbing all the happy paths, add an rdma_restrack_sync() operation which is sort of like flush_workqueue() or synchronize_irq(): after it returns, all the old nldev touches to the mr are gone and everything sees the new PD. This makes it safe to reach into the PD pointer. | Aug 15, 2026 |
| CVE-2026-74333(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-legacy: Bound DAI link iteration create_sdw_dailinks() walks soc_dais until it finds an entry with initialised cleared, but soc_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. This was reported by KASAN: BUG: KASAN: slab-out-of-bounds in mc_probe+0x26b3/0x2774 [snd_acp_sdw_legacy_mach] Read of size 1 Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array. | Aug 15, 2026 |
| CVE-2026-74332(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-sof: Bound DAI link iteration create_sdw_dailinks() walks sof_dais until it finds an entry with initialised cleared, but sof_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array. | Aug 15, 2026 |
| CVE-2026-74331(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix recursive lock in device_cache_fw_images() A recursive locking deadlock can occur in the firmware loader's power management notification handler. During system suspend or hibernation preparation, fw_pm_notify() calls device_cache_fw_images(). This function acquires fw_lock to set the firmware cache state to FW_LOADER_START_CACHE and then iterates over all devices using dpm_for_each_dev() while still holding the lock. For each device, dev_cache_fw_image() schedules asynchronous work to cache the firmware. If memory allocation for the async work entry fails (e.g., in out-of-memory conditions), async_schedule_node_domain() falls back to executing the work function synchronously in the current thread. The synchronous execution path (__async_dev_cache_fw_image() -> cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire fw_lock again. Since the current thread already holds fw_lock, this results in a recursive locking deadlock. Fix this by releasing fw_lock immediately after updating the cache state and before calling dpm_for_each_dev(). The lock is only needed to protect the state update. Concurrent firmware requests will correctly see the FW_LOADER_START_CACHE state and use the piggyback mechanism, which is independently protected by its own fwc->name_lock. | Aug 15, 2026 |
| CVE-2026-74330(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: configfs: fix lockless traversals of ->s_children Having the parent directory locked protects entries from removal by another thread, but it does *not* protect cursors from being moved around by lseek() - or freed, for that matter. | Aug 15, 2026 |
| CVE-2026-74329(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: watchdog: unregister PM notifier on watchdog unregister watchdog_register_device() registers wdd->pm_nb when WDOG_NO_PING_ON_SUSPEND is set, but watchdog_unregister_device() does not remove it. This leaves an embedded notifier block on the PM notifier chain after the watchdog device has been unregistered. A later suspend/resume notification can then call watchdog_pm_notifier() with a stale watchdog_device pointer, or at minimum after wdd->wd_data has been cleared by watchdog_dev_unregister(). Unregister the PM notifier before tearing down the watchdog device. | Aug 15, 2026 |
| CVE-2026-74328(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: iommufd: Destroy the pages content after detaching from dmabuf Sashiko points out this has gotten out of order, the mutex could still be in use through the dmabuf invalidation callbacks. Don't destroy any of the pages content until the dmabuf is fully detached. | Aug 15, 2026 |
| CVE-2026-74327(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: vmalloc: fix NULL pointer dereference in is_vm_area_hugepages() find_vm_area() can return NULL if the given address is not a valid vmalloc area. Check the return value before dereferencing it to avoid a kernel crash. | Aug 15, 2026 |
| CVE-2026-74326(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix resource leak in probe error path When pcim_iomap_region() or devm_kmemdup() fail, the code returns directly without cleaning up previously allocated resources: - mt76_device allocated by mt76_alloc_device() - pci irq vectors allocated by pci_alloc_irq_vectors() Fix this by jumping to the existing error cleanup path instead of returning directly. | Aug 15, 2026 |