Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
43,334 matching · page 128/867Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-74490(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: tipc: avoid use-after-free in poll trace queue dumps TIPC socket tracepoints dump queue state through tipc_sk_dump(). Most queue-dump callsites already serialize that walk under the socket lock or sk->sk_lock.slock, but tipc_poll() calls trace_tipc_sk_poll(..., TIPC_DUMP_ALL, ...) without holding either lock. That lets the poll trace path reach tipc_list_dump() and backlog head/tail dumping while another context dequeues and frees an skb, leaving the trace helper dereferencing a stale queue entry. Stop the unlocked poll trace site from requesting queue dumps. Other queue dump trace callsites keep their existing output under the locking they already provide, while poll still emits the event itself without walking live queue members from an unlocked context. | Aug 15, 2026 |
| CVE-2026-74489(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix tid_tx use-after-free on BA session stop ieee80211_stop_tx_ba_cb() hands tid_tx to kfree_rcu() through ieee80211_remove_tid_tx(), and then reads tid_tx->ndp after dropping sta->lock: ieee80211_remove_tid_tx(sta, tid); /* kfree_rcu(tid_tx, rcu_head) */ ... spin_unlock_bh(&sta->lock); if (start_txq) ieee80211_agg_start_txq(sta, tid, false); if (send_delba) ieee80211_send_delba(..., tid_tx->ndp); That read is not covered by an RCU read-side critical section, and it runs in preemptible process context: both callers hold the wiphy mutex, reaching it either from the ieee80211_ba_session_work() wiphy work or from ieee80211_sta_tear_down_BA_sessions() during station teardown. Softirqs can run in that window too, both from the local_bh_enable() that ends ieee80211_agg_start_txq() and from any interrupt exit, so the RCU callback can free tid_tx before the read. Driving the function from a test module with the grace period forced into that window, KASAN reports the read, and the free arrives on the ordinary RCU softirq path: BUG: KASAN: slab-use-after-free in ieee80211_stop_tx_ba_cb+0x3cd/0x400 Read of size 1 at addr ffff888002b9f52e by task kworker/0:1/10 [...] Freed by task 57: __kasan_slab_free+0x47/0x70 __rcu_free_sheaf_prepare+0x70/0x250 rcu_free_sheaf_nobarn+0x18/0x40 rcu_core+0x426/0x1310 handle_softirqs+0x144/0x590 __irq_exit_rcu+0xea/0x150 irq_exit_rcu+0x9/0x20 sysvec_apic_timer_interrupt+0x6b/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 send_delba is only set when tx_stop is set, which happens for AGG_STOP_LOCAL_REQUEST alone, so this is reached on local teardown - session idle timeout, PTK rekey, suspend, HW reconfig - and not from a peer's DELBA. Read ndp into a local before the session is freed, while sta->lock is still held. tid_tx->ndp has a single writer, in ieee80211_tx_ba_session_handle_start(), which cannot run concurrently here: both paths are serialised by the wiphy mutex, and the session is already marked HT_AGG_STATE_STOPPING at this point. tid_tx->ndp is also the only tid_tx dereference left after ieee80211_remove_tid_tx() in this function. [move/change the comment a bit to be more general not just on ndp, initialize ndp directly] | Aug 15, 2026 |
| CVE-2026-74488(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: use the subframe length when parsing A-MSDU TDLS frames mwifiex_11n_dispatch_amsdu_pkt() splits an A-MSDU with ieee80211_amsdu_to_8023s() and walks the resulting subframes. For each subframe it passes the subframe data pointer to mwifiex_process_tdls_action_frame(), but pairs it with skb->len, the length of the A-MSDU parent, instead of rx_skb->len: rx_skb = __skb_dequeue(&list); rx_hdr = (struct rx_packet_hdr *)rx_skb->data; if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) && ntohs(rx_hdr->eth803_hdr.h_proto) == ETH_P_TDLS) { mwifiex_process_tdls_action_frame(priv, (u8 *)rx_hdr, skb->len); } The parent is not a valid description of that buffer, and may not be valid memory at all. ieee80211_amsdu_to_8023s() ends with if (!reuse_skb) dev_kfree_skb(skb); and it only sets reuse_skb when the parent is linear, is not a head_frag, and is being consumed as the *last* subframe. So when the parent does not qualify for reuse it has already been freed, and the read of skb->len is a use-after-free. When it is reused, skb->len is the length of the last subframe, applied to every earlier subframe, which over-states the buffer whenever an earlier subframe is shorter. The callee cannot absorb a wrong length, because it derives its own ceiling from the value it is given. Each frame type computes ies_len = len - sizeof(struct ethhdr) - TDLS_*_FIX_LEN; and the element walk is then bounded entirely against that ceiling, for (end = pos + ies_len; pos + 1 < end; pos += 2 + pos[1]) { u8 ie_len = pos[1]; if (pos + 2 + ie_len > end) break; so a too-large len moves end past the end of the subframe and the walk reads and copies beyond it. The A-MSDU layout is chosen by the sender, which makes the difference between the last subframe and a shorter earlier one remotely selectable. Reaching this requires TDLS support in firmware and the TDLS ethertype on the subframe. The other caller, mwifiex_process_rx_packet(), is correct: it passes a pointer and a length that describe the same region of the RX buffer. Pass rx_skb->len, the length of the subframe actually being parsed. | Aug 15, 2026 |
| CVE-2026-74487(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: restore write access when removing an entry Registering an entry with the MISC_FMT_OPEN_FILE flag opens the interpreter via open_exec() which denies write access to it for as long as the entry exists. Removing the entry closes the interpreter file via filp_close() but never restores write access, leaving the inode's i_writecount permanently negative. Opening the interpreter for writing keeps failing with ETXTBSY long after the entry is gone until the inode is evicted from the inode cache. Commit 90f601b497d7 ("binfmt_misc: restore write access before closing files opened by open_exec()") fixed the same imbalance in the error path of bm_register_write() but the actual removal path has been leaking the write denial since the introduction of the flag. Restore write access in put_binfmt_handler() before closing the interpreter file. | Aug 15, 2026 |
| CVE-2026-74486(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: use exe_file_deny_write_access() for the interpreter clone For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the registered interpreter file and denies write access to the clone via plain deny_write_access(). The clone is installed as bprm->interpreter and later released by the exec machinery through exe_file_allow_write_access() which skips the i_writecount increment for files with FMODE_FSNOTIFY_HSM set. The deny and allow side can therefore come to different conclusions when pre-content watches are in play: if a pre-content watch is added to the interpreter after registration every subsequent exec through that entry takes a write denial on the clone that is never paired with a write allowance, driving the interpreter inode's i_writecount further down with each exec and leaving the interpreter unwritable even after the entry and all its users are gone. Take the write denial via exe_file_deny_write_access() so both sides of the pairing base their decision on the same file mode, and propagate failure instead of silently ignoring it: an interpreter that is concurrently open for writing now fails the exec with ETXTBSY, exactly like an interpreter freshly opened via open_exec() would. | Aug 15, 2026 |
| CVE-2026-74485(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: reject a flag character as the field delimiter The registration string starts with a user chosen delimiter that separates the individual fields. So that the field parsers terminate even on a truncated string create_entry() pads the buffer with that same delimiter: memset(buf + count, del, 8); Most fields are scanned for the delimiter with strchr()/scanarg() and happily stop on the padding. The flags field is different: instead of scanning for the delimiter check_special_flags() consumes the flag characters 'P', 'O', 'C' and 'F' and stops at the first byte that is none of them, relying on the trailing delimiter to end the scan. If the delimiter is itself a flag character the padding no longer acts as a terminator. The scan swallows all eight padding bytes and keeps reading past the end of the allocation until it hits a byte that is not a flag character. For example registering PaPEPPxPPiP with 'P' as the delimiter (name "a", type extension, magic "x", interpreter "i", empty flags) leaves the flag scan running off the end of the buffer. The registration is rejected in the end because the parser does not stop exactly at buf + count, but only after the out of bounds read has already happened. With an unlucky allocation layout the scan can walk into an unmapped page; under KASAN it is reported as a slab out of bounds read. binfmt_misc mounts are available to unprivileged users in a user namespace so the read is reachable without privileges. Reject a delimiter that is one of the flag characters up front. Such a registration was always rejected anyway, only after the out of bounds read, so no valid registration string changes meaning. | Aug 15, 2026 |
| CVE-2026-74484(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't let an 'F' entry pin its own instance An entry registered with 'F' opens its interpreter at registration time and holds that file until the entry is freed. Any entry nobody removes by hand only gets closed once the binfmt_misc superblock is shut down. If the interpreter lives on a mount that keeps that superblock alive the two pin each other: binfmt_misc sb -> inode -> entry -> interp_file -> vfsmount -> binfmt_misc sb TL;DR the file is never closed. Once the mount namespace is gone there is nothing left to unregister through either. There are two ways to trigger this bug: - Point the interpreter at the instance itself. Its files are regular files owned by the mounter and both bm_get_inode() and simple_fill_super() leave i_op at empty_iops. So notify_change() falls back to simple_setattr() and chmod +x works. We never set SB_I_NOEXEC and so open_exec() accepts it. - Use the instance as an overlayfs lower layer. The overlay superblock holds a clone_private_mount() of every layer until it is destroyed and that clone is in no namespace. So umount_tree() never reaches it. That's a DoS. And it isn't only the superblock that leaks. It pins the user namespace it was mounted in, so every iteration permanently eats one of the caller's user namespace charges. So let's just do the sane thing. SB_I_NOEXEC makes open_exec() fail on the instance's own files and s_stack_depth makes overlayfs reject the layer before it ever takes a clone. That also covers the ecryptfs and fuse passthrough variants. What 'F' promises is unchanged. The stable tag is narrower than the Fixes tags on purpose. Before sandboxed mounts this needed global root against the single instance everyone shares, and the change doesn't apply to those trees anyway. Note that SB_I_NODEV is implicitly raised for userns mounts but raise it explicitly here as well. | Aug 15, 2026 |
| CVE-2026-74483(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't leak the user namespace when the mount fails bm_get_tree() takes a reference to the user namespace and hands it to get_tree_keyed() as the sget key. sget_fc() moves that reference into sb->s_fs_info and clears fc->s_fs_info, so from that point on the superblock owns it and bm_free() doesn't see it anymore. The superblock drops it in ->put_super(). But generic_shutdown_super() only calls ->put_super() from inside the if (sb->s_root) branch, so nothing releases it when bm_fill_super() fails: - The kzalloc_obj() failure leaves s_root NULL and the whole branch is skipped. - A simple_fill_super() failure in the file loop leaves s_root set, but s_op still points at simple_super_operations, which has no ->put_super(). bm_fill_super() installs s_ops only once simple_fill_super() returned success, and installing it earlier wouldn't help either because simple_fill_super() overwrites s_op. Either way vfs_get_super() calls deactivate_locked_super() and the reference is gone for good. binfmt_misc mounts are available in a user namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so an unprivileged caller under a tight memory cgroup can fail simple_fill_super() on demand and leak one user namespace per attempt. Drop the reference in ->kill_sb() instead, which runs unconditionally, the same way nfsd and rpc_pipefs release their keyed s_fs_info. That also stops ->put_super() from clearing s_fs_info while the superblock is still on @fs_supers. generic_shutdown_super() leaves it there on purpose so that sget_fc() keeps finding it until kill_sb() has run, but a NULL s_fs_info makes test_keyed_super() miss it, so a concurrent mount for the same user namespace skips the grab_super() wait and creates a second superblock for a namespace that is still being torn down. | Aug 15, 2026 |
| CVE-2026-74482(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: unlock i_mmap_rwsem before releasing after-split folios __folio_split() keeps dereferencing the mapping after the split: shmem_uncharge(mapping->host) and remap_page() while the folios are still frozen/locked, and i_mmap_unlock_read(mapping) at the very end, after the after-split folios have been unlocked and freed. Nothing holds an inode reference across that. The split relies on @folio -- which the beyond-EOF drop loop never removes, as it starts at folio_next(folio) -- staying locked and in the page cache to hold off eviction. But the unlock loop unlocks @folio before i_mmap_unlock_read() runs. If the caller's @lock_at is a tail beyond EOF, as memory_failure() passes when splitting a poisoned tail of a shmem THP that reaches past i_size during truncation, it too is gone from the page cache; so once @folio is unlocked no locked, in-cache folio pins the inode, and a concurrent final iput() can evict and RCU-free it before i_mmap_unlock_read() touches i_mmap_rwsem: BUG: KASAN: slab-use-after-free in __up_read+0x634/0x790 i_mmap_unlock_read include/linux/fs.h:537 [inline] __folio_split+0x732/0x1640 mm/huge_memory.c:4100 try_to_split_thp_page+0xab/0x390 mm/memory-failure.c:1675 memory_failure+0x1394/0x26e0 mm/memory-failure.c:2470 Freed by task 4601: shmem_free_in_core_inode+0x54/0xb0 mm/shmem.c:5177 evict+0x57f/0xac0 fs/inode.c:870 Do every mapping dereference while @folio still pins the inode: drop i_mmap_rwsem right after remap_page(), before the loop that unlocks and frees the after-split folios, and clear @mapping so the exit path does not unlock it again. shmem_uncharge() and remap_page() already run before that point, so after this nothing past the unlock loop touches the inode or the mapping. This is now a rule the split depends on, alongside keeping @folio frozen until the page cache is updated: no inode or mapping dereference once the after-split folios start being unlocked. | Aug 15, 2026 |
| CVE-2026-74481(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: mm/page_reporting: use system_freezable_wq to fix UAF during suspend During PM freeze (e.g. S3 suspend or S4 hibernation), device drivers like virtio_balloon reset their underlying virtio devices and delete their virtqueues via vdev->config->del_vqs(). However, page reporting work (page_reporting_process) was scheduled on the global system_wq. Because system_wq lacks the WQ_FREEZABLE flag, the PM freezer skips it, leaving page_reporting_process active during suspend. If pages are freed into the buddy allocator while suspending (for example, when core MM invokes the balloon shrinker during S4 hibernation image saving), page reporting triggers virtballoon_free_page_report() on deleted virtqueues, resulting in a Use-After-Free / General Protection Fault: [ 196.795226] general protection fault, probably for non-canonical address 0xaa1436fe70dae6df: 0000 [#1] SMP NOPTI [ 196.825967] Workqueue: events page_reporting_process [ 196.831038] RIP: 0010:virtqueue_add_split+0x233/0x4c0 [virtio_ring] [ 196.927073] virtballoon_free_page_report+0x3a/0xe0 [virtio_balloon] [ 196.946943] page_reporting_process+0x370/0x4f0 Fix this by switching page reporting work to system_freezable_wq. This ensures that the PM freezer pauses page_reporting_process before device drivers destroy their reporting virtqueues. Because the reporting worker is frozen, memory reclamation/freeing (e.g. via shrinker execution) can safely return pages to MM during freeze without triggering unfrozen reporting work on deleted virtqueues. This aligns with the driver's existing design. The comment in virtballoon_freeze() states: /* * The workqueue is already frozen by the PM core before this * function is called. */ Testing: I have verified these fixes using Google’s virtualization infrastructure by running continuous suspend/resume iterations (40+ cycles) while churning memory using stress-ng (`stress-ng --vm 4 --vm-bytes 60% --timeout 1`) to constantly create free pages for the buddy allocator. We also set the `page_reporting_order` parameter to 0 to make the page reporting worker highly sensitive, forcing it to pick up any 4K free pages. This confirmed that the UAF crashes are no longer reproducible. | Aug 15, 2026 |
| CVE-2026-74480(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: net: bridge: stop fast-leave after deleting a port group br_multicast_leave_group() iterates mp->ports with pp = &p->next in its fast-leave path. After br_multicast_del_pg() removes p, continuing the loop advances pp through the deleted entry. If multicast-to-unicast was enabled, the bridge can hold multiple port groups for the same port and group with different source MAC addresses. Once multicast-to-unicast is disabled, br_port_group_equal() matches those entries by port only. A fast leave can then delete one entry and continue from its stale next pointer, leaving mp->ports pointing at a deleted port group. Fast leave only needs to remove one matching port group. Break after br_multicast_del_pg() so the loop stops before dereferencing the removed entry. | Aug 15, 2026 |
| CVE-2026-74479(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net: pktgen: fix proc entry use-after-free pktgen_change_name() replaces pkt_dev->entry while holding t->if_lock. pktgen_remove_device() removes the same entry before _rem_dev_from_if_list() takes that lock. This allows the following interleaving: CPU 0 (NETDEV_CHANGENAME) CPU 1 (kpktgend) if_lock(t) proc_remove(pkt_dev->entry) proc_remove(pkt_dev->entry) pkt_dev->entry = proc_create_data(...) if_unlock(t) The kthread can pass the stale proc_dir_entry to proc_remove() after the rename path has freed it. A reproducer with a widened race window reports: BUG: KASAN: slab-use-after-free in proc_remove+0x78/0x80 Read of size 8 at addr ffff8881478fea70 by task kpktgend_0/67 Call Trace: proc_remove+0x78/0x80 pktgen_remove_device.isra.0+0x11c/0x4c0 pktgen_thread_worker+0x1214/0x6bc0 kthread+0x2c6/0x3b0 Allocated by task 95: __proc_create+0x204/0x790 proc_create_data+0x72/0xe0 pktgen_thread_write+0xd61/0x1510 Freed by task 28: kmem_cache_free+0xcb/0x3d0 proc_free_inode+0x5b/0x80 rcu_core+0x50a/0x1850 The buggy address belongs to the object at ffff8881478fea00 which belongs to the cache proc_dir_entry of size 192 Move proc_remove() into the if_lock-protected list removal helper. Keep it before list_del_rcu() to preserve the ordering required by add_device(). The rename path must then finish replacing the entry before removal, or it observes that the device is no longer on the list. | Aug 15, 2026 |
| CVE-2026-74478(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: um: vector: fix use-after-free in vector_mmsg_rx() When vector_mmsg_rx() discards a packet whose overlay header fails verify_header(), it frees the skb and continues the loop: if (header_check < 0) { dev_kfree_skb_irq(skb); vp->estats.rx_encaps_errors++; continue; } The normal and short-packet paths fall through to the bottom of the loop body, which clears the consumed slot and advances the cursors: (*skbuff_vector) = NULL; mmsg_vector++; skbuff_vector++; The verify_header() < 0 path skips that via continue, so the freed skb is left in skbuff_vector[] and the cursors do not advance. The next iteration reads the same slot, gets the freed skb, and frees it again, producing a refcount underflow / use-after-free in the RX path. Discard the slot the same way the other paths do before continuing. Only transports whose verify_header() can return negative are affected: GRE and L2TPv3 do so on a cookie/session-id mismatch (raw/tap do not), so any peer on such a transport can trigger it without authentication. | Aug 15, 2026 |
| CVE-2026-74477(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: uprobes: Fix NULL pointer dereference in hprobe_expire() Forking a task that has a pending uretprobe can oops the kernel with a NULL pointer dereference in the clone() path: BUG: kernel NULL pointer dereference, address: 0000000000000018 Oops: 0002 [#1] SMP NOPTI RIP: 0010:hprobe_expire CR2: 0000000000000018 Call Trace: uprobe_copy_process copy_process kernel_clone __x64_sys_clone do_syscall_64 entry_SYSCALL_64_after_hwframe This was found on real hosts on Meta fleet. I've got the impression that this is what is happening: CPU 1 CPU 2 (traced task) ----- ------------------- hit uprobe, prepare_uretprobe(): hprobe LEASED, refcount >= 1 uprobe_unregister() put_uprobe(): refcount -> 0 fork() -> dup_utask() hprobe_expire(hprobe, true) try_get_uprobe() -> NULL get_uprobe(NULL) <-- Oops Only take the extra reference when the uprobe is non-NULL; a NULL means it is gone and is the correct value to return. | Aug 15, 2026 |
| CVE-2026-74476(opens NVD record) | Critical | 9.1 | In the Linux kernel, the following vulnerability has been resolved: veth: convert frag_list skbs before running XDP A frag_list skb can reach veth with data_len set but nr_frags zero. veth_convert_skb_to_xdp_buff() only converts skbs that are shared, locked, have frags[], or do not have enough headroom. It later uses skb_is_nonlinear() to decide whether to set XDP_FLAGS_HAS_FRAGS and xdp_frags_size. That exposes frag_list data to XDP as if it were stored in frags[], but frags[] is empty. AF_XDP copy mode can then trust the bogus XDP fragment metadata, walk an empty fragment entry, and crash in memcpy() from __xsk_rcv(). Route non-linear skbs through skb_pp_cow_data() before exposing them to XDP, and only advertise XDP frags when the resulting skb has frags[]. skb_copy_bits() already handles frag_list input, and skb_pp_cow_data() builds frags[] output with skb_add_rx_frag(), which is the representation XDP multi-buffer expects. | Aug 15, 2026 |
| CVE-2026-74475(opens NVD record) | Critical | 10.0 | In the Linux kernel, the following vulnerability has been resolved: vxlan: use neigh_ha_snapshot() in route_shortcircuit() The neighbour hardware address n->ha can be updated asynchronously by the neighbour subsystem, protected by n->ha_lock seqlock. Reading n->ha without holding the seqlock loop can lead to torn reads or reading a partially updated MAC address. Use neigh_ha_snapshot() in route_shortcircuit() to safely copy n->ha under read_seqbegin()/read_seqretry() lock protection before using it. Note that arp_reduce() and neigh_reduce() seem to have the same issue left for future patches. | Aug 15, 2026 |
| CVE-2026-74474(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: vxlan: use pskb_network_may_pull() for transmit path header pulls In vxlan_xmit(), arp_reduce(), and vxlan_mdb_entry_skb_get(), pskb_may_pull() was being called to verify the availability of network layer headers (ARP, IPv6/ND, IP/IPv6 MDB keys). However, during transmit skb->data points to the MAC header, so skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, len) only checks len bytes from skb->data rather than skb_network_offset(skb) + len, which can leave part of the network header in non-linear frags. Replace these remaining pskb_may_pull() calls with pskb_network_may_pull() to properly account for the MAC header offset. | Aug 15, 2026 |
| CVE-2026-74473(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: vxlan: use pskb_network_may_pull() in route_shortcircuit() route_shortcircuit() currently calls pskb_may_pull(skb, sizeof(struct iphdr)) (or ipv6hdr), which checks if bytes are available starting from skb->data. However, in vxlan_xmit(), skb->data points to the MAC header, so skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, 20) only checks 20 bytes from skb->data (which is 14 bytes MAC header + 6 bytes of IP header), leaving the rest of the IP header potentially un-pulled in non-linear frags. Subsequent dereferences of ip_hdr(skb)->daddr can read beyond the pulled linear buffer length. Fix this by using pskb_network_may_pull(), which adds skb_network_offset(skb) to the length check to ensure the full network header is present in the linear buffer. | Aug 15, 2026 |
| CVE-2026-74472(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: ublk: reset kernel-owned dev_info fields in ublk_ctrl_add_dev() ublk_ctrl_add_dev() memcpy()s the userspace ublksrv_ctrl_dev_info into ub->dev_info and then fixes up the fields the driver owns, but misses ->state and ->ublksrv_pid. A device added with ->state = UBLK_S_DEV_LIVE passes the "->state != UBLK_S_DEV_DEAD" test that ublk_stop_dev_unlocked() uses as its proxy for "a disk is attached", while ->ub_disk is still NULL, so DEL_DEV right after ADD_DEV oopses in del_gendisk(). UBLK_S_DEV_QUIESCED plus UBLK_F_USER_RECOVERY dies one step earlier, in ublk_force_abort_dev(). A poisoned ->state also gets START_USER_RECOVERY and the char device read/write path onto a device that was never started, and wedges START_DEV at -EEXIST. A poisoned ->ublksrv_pid just makes GET_DEV_INFO report an unrelated task as the ublk server. Reset both after the memcpy(), as ublk_detach_disk() does. Userspace only ever reads these back, so correcting them silently breaks nothing. ADD_DEV has copied ->state in unsanitized since ublk was merged, but back then it was harmless: the gendisk was allocated during ADD_DEV, and both teardown and the START_DEV -EEXIST check keyed off disk_live() rather than ->state. The oops became reachable once the disk allocation moved to START_DEV and those checks switched to ->state. | Aug 15, 2026 |
| CVE-2026-74471(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: tracing: Check return value of __register_event() in trace_module_add_events() trace_module_add_events() ignores the return value of __register_event() and unconditionally calls __add_event_to_tracers() for each event. If __register_event() fails (for example, if event_init() fails), the trace_event_call is not added to ftrace_events list, but __add_event_to_tracers() still creates a trace_event_file pointing to it. If module loading subsequently fails and module memory is freed, tracing state retains a stale trace_event_call pointer in trace_event_file, leading to a use-after-free when tracefs or tracing subsystem operations are later executed. Fix this by checking the return value of __register_event() and only calling __add_event_to_tracers() if event registration succeeded. | Aug 15, 2026 |
| CVE-2026-74470(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write resp_report_zones() sizes the reply buffer from the CDB allocation length. The v3 fix rounds alloc_len up with ALIGN() before deriving the descriptor count: rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) - RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD); arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1); For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to 0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which passes the !arr check, and desc = arr + 64 is then dereferenced in the loop -> out-of-bounds write / panic. Clamp rep_max_zones to devip->nr_zones. The loop already stops at sdebug_capacity (after nr_zones zones), so a report can never hold more than nr_zones descriptors; the clamp does not change the report, it only bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device property that can never reach 0x100000000. | Aug 15, 2026 |
| CVE-2026-74469(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: sctp: prevent peer transport count overflow sctp_assoc_add_peer() increments the association's 16-bit transport_count for every new unique peer. Adding the 65,536th transport wraps the count to zero. SCTP sock_diag uses transport_count to reserve the INET_DIAG_PEERS payload, then copies one sockaddr_storage for every entry in transport_addr_list. After the wrap, a diagnostic dump reserves an empty payload and writes 8 MiB of peer addresses past the skb tail. Reject a new unique peer when transport_count has reached U16_MAX. Perform the check after the existing-peer lookup so a duplicate address continues to return its existing transport at the limit. | Aug 15, 2026 |
| CVE-2026-74468(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: gpio: pch: use raw_spinlock_t for the register lock pch_irq_type() is registered as the irq_chip .irq_set_type callback and takes chip->spinlock with spin_lock_irqsave(). This callback is reached from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled. That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is an rtmutex-backed sleeping lock, so acquiring it there is invalid. This was confirmed on a PREEMPT_RT kernel with lockdep (PROVE_RAW_LOCK_NESTING and DEBUG_ATOMIC_SLEEP). A grounded PoC mirrored pch_irq_type()'s locking and drove it through the real genirq carrier irq_set_irq_type() -> __irq_set_trigger() -> chip->irq_set_type(), i.e. the same __irq_set_trigger() edge that __setup_irq() takes for a requested IRQ. With the original spin_lock_irqsave() edge lockdep reported an invalid wait context, immediately followed by: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 95, name: insmod hardirqs last disabled at (3784): _raw_spin_lock_irqsave+0x4f/0x60 rt_spin_lock+0x3a/0x1c0 repro_irq_set_type+0x64/0xa0 [pch_repro] __irq_set_trigger+0x69/0x140 irq_set_irq_type+0x78/0xd0 Switching the mirrored lock to raw_spinlock_t made both splats go away. Convert the register lock to raw_spinlock_t. The same lock also serializes the GPIO direction/value callbacks and the suspend/resume register save/restore, but all of those critical sections only perform MMIO register accesses (ioread32()/iowrite32()) and irq_set_handler_locked(); none of them contain sleepable operations. Keeping this register lock non-sleeping is therefore appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. This is the same class of issue and fix as recently addressed for other GPIO controllers, e.g. commit 286533cb14a3 ("gpio: sch: use raw_spinlock_t in the irq startup path") and commit 90f0109019e6 ("gpio: eic-sprd: use raw_spinlock_t in the irq startup path"). | Aug 15, 2026 |
| CVE-2026-74467(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: s390/qeth: Check CAP_NET_ADMIN for private ioctls Gate the SIOCDEVPRIVATE ioctl commands SIOC_QETH_ADP_SET_SNMP_CONTROL, SIOC_QETH_GET_CARD_TYPE and SIOC_QETH_QUERY_OAT with CAP_NET_ADMIN capable check to ensure unprivileged users cannot invoke them. | Aug 15, 2026 |
| CVE-2026-74466(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Close speculative mem read possibility The domain value is extracted from a given CCA or EP11 ioctl struct when a CPRB is about to be sent. Thus this is a user controlled value. Under some special conditions (custom device node used, administrative load) this value is used as an array index after bounds checking, but without speculation barrier. Add the missing array_index_nospec() call to prevent speculative execution where this domain value is used. | Aug 15, 2026 |
| CVE-2026-74465(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix potential UAF on meter attach failure While attaching a newly created meter attach_meter() function makes the new meter visible to other CPUs but can still fail afterwards. On failure, it detaches the meter back and returns an error. However, this is an unexpected behavior for the ovs_meter_cmd_set() that uses a plain kfree(meter) on attach failure without waiting for RCU readers to stop using it, assuming it was never visible. This is never a problem for ovs-vswitchd as it always creates meters before creating any flows that use them. But the UAF can be triggered with a custom application using uAPI: BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653) Read of size 8 at addr ffff88810d152650 by task meter/2508 Call Trace: ovs_meter_execute (net/openvswitch/meter.c:653) do_execute_actions (net/openvswitch/actions.c:1407) ovs_execute_actions (net/openvswitch/actions.c:1584) ovs_packet_cmd_execute (net/openvswitch/datapath.c:703) ... netlink_sendmsg (af_netlink.c:1900) Allocated by task 2519: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) ovs_meter_cmd_set (net/openvswitch/meter.c:422) ... netlink_sendmsg (af_netlink.c:1900) Freed by task 2519: kfree (mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720) ovs_meter_cmd_set (net/openvswitch/meter.c:479) ... netlink_sendmsg (af_netlink.c:1900) Fix that by making sure attach_meter() doesn't make the meter visible until all the checks are done and the function can't fail anymore. This also makes sure the "hash" value is calculated after the potential re-sizing of the table. Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-31642. | Aug 15, 2026 |
| CVE-2026-74464(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix skb leak on flow key update failure during ct ovs_ct_execute() always steals or frees the skb on failure while ovs_flow_key_update() does not. So, if it fails and we return right away, the skb ends up leaked. Fix that by breaking instead and letting the common error handling code at the bottom of the loop to free the skb properly. This is a very unlikely scenario as it requires the packet to become unparseable by applying a set of actions on a previously parseable skb, but should be fixed nevertheless. Reported by Sashiko. | Aug 15, 2026 |
| CVE-2026-74463(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock Fix a severe AB/BA deadlock between the Common Clock Framework (CCF) and the I2C adapter lock, which triggers when an I2C-controlled clock generator client (like the Si5351) is registered or modified under the CCF. During an i2c client clock (generator) frequency change, the CCF acquires its global 'prepare_lock' mutex and the driver calls i2c_transfer() to update the client's chip registers, stalling for the adapter's I2C bus lock. Concurrently, an independent, parallel transfer on the same bus (e.g., a GPIO expander handling LEDs) can hold the I2C adapter lock. Inside this parallel transfer path, jz4780_i2c_set_speed() calls clk_get_rate() on the host controller's input clock to calculate bus timings. This call attempts to acquire the blocked CCF 'prepare_lock', creating a circular dependency that freezes the system. The jz4780 host controller clock itself is static and never changes at runtime. However, calling clk_get_rate() inside the active transfer path introduces an unnecessary dependency on the CCF internal locks. Eliminate this synchronous clk_get_rate() call from the active transfer path by caching the static host peripheral clock rate once - inside the private jz4780_i2c structure during jz4780_i2c_probe(). Update jz4780_i2c_set_speed() to use this cached value, safely decoupling active I2C transactions from the CCF internal locks without any risk of stale timings. Assisted-by web based Google AI (pinpointing the bug and writing the message). | Aug 15, 2026 |
| CVE-2026-74462(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: i2c: imx: mark I2C adapter when hardware is powered down On some i.MX platforms, certain I2C client drivers keep a periodic workqueue which continues to trigger I2C transfers. During system suspend/resume, there exists a time window between: - suspend_noirq and the system entering suspend - the system starting to resume and resume_noirq In this window, the I2C controller resources such as clock and pinctrl may already be disabled or not yet restored. If a workqueue triggers an I2C transfer in this period, the driver attempts to access I2C registers while the hardware resources are unavailable, which may lead to system hang. Mark the I2C adapter as suspended during noirq suspend and block new transfers until resume, ensuring that I2C transfers are only issued when hardware resources are available. | Aug 15, 2026 |
| CVE-2026-74461(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: i2c: imx: Cancel hrtimer before clearing slave pointer In i2c_imx_unreg_slave(), the slave pointer is set to NULL after disabling interrupts. However, a pending interrupt might already have started the hrtimer (i2c_imx_slave_timeout) before the pointer was cleared. If the hrtimer fires after i2c_imx->slave is set to NULL, the timer callback i2c_imx_slave_finish_op() will call i2c_imx_slave_event() with a NULL slave pointer, which results in a use-after-free / NULL pointer dereference. Fix by canceling the hrtimer and waiting for it to complete after disabling interrupts, before clearing the slave pointer. | Aug 15, 2026 |
| CVE-2026-74460(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: validate CPC message lengths ems_usb_read_bulk_callback() walks CPC messages packed in one USB receive buffer. Check that each declared message fits in the URB payload. Also require the type-specific payload to cover the fields used by the CAN, state, error and overrun handlers. | Aug 15, 2026 |
| CVE-2026-74459(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure es58x_read_bulk_callback() resubmits the RX URB after processing a received packet. If the resubmit succeeds, the URB remains anchored and will be handled by the normal RX path or by teardown. However, if usb_submit_urb() fails, the callback unanchors the URB and then returns directly. This skips the existing free_urb path, so the coherent transfer buffer allocated with usb_alloc_coherent() is not released. Reuse the existing free_urb path after a resubmit failure so that the RX coherent buffer is freed before leaving the callback. | Aug 15, 2026 |
| CVE-2026-74458(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents The wait and bulk receive paths walk variable-length commands from a USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be dispatched, and the wait path copies a matching command into a fixed caller-owned struct kvaser_cmd using the device-provided length. Reject nonzero commands that do not contain the fixed header or that extend beyond the current USB buffer item. In the wait path, also reject a matching command that exceeds the destination before copying it. | Aug 15, 2026 |
| CVE-2026-74457(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: add bounds check for USB channel index The channel control index ctrl_idx is derived from rx->len which comes directly from a device USB payload. The mask 0x0f allows values 0-15, but the array size of usb_if->dev[] is only 2. Values 2-15 cause heap out-of-bounds read, eventually causing kernel panic in the IRQ context. Add bounds checking for ctrl_idx before the array access in both pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). | Aug 15, 2026 |
| CVE-2026-74456(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc() and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also frees the transfer buffer. If usb_submit_urb() fails, the error path frees the buffer explicitly with kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set, usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double free of the transfer buffer. BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0 Free of addr ffff8881069ccb80 by task trigger.sh/285 Call Trace: kfree+0x113/0x3c0 usb_free_urb.part.0+0x91/0xb0 Drop the redundant kfree(buf); usb_free_urb() already releases the transfer buffer. This mirrors commit 03819abbeb11 ("net: usb: lan78xx: Fix double free issue with interrupt buffer allocation"). | Aug 15, 2026 |
| CVE-2026-74455(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: validate uCAN receive record lengths pcan_usb_fd_decode_buf() walks uCAN records packed in one USB receive buffer. Require each record to contain the fixed header for its type, and verify CAN payload bytes before copying them into the skb. | Aug 15, 2026 |
| CVE-2026-74454(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB binner BO, but writes the size of the whole BO to BPOS. On every binner out-of-memory event the PTB is therefore authorized to write tile lists across all the other slots (which may hold the tile state, tile alloc and overflow memory of in-flight jobs) and, for any slot but the first, past the end of the binner BO into unrelated CMA memory. Since CMA pages are recycled into page cache and user allocations, this is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU hangs with corrupted control list pointers, userspace heap corruption, a GPU that stays permanently wedged after the first hang, and occasional full system crashes, whenever a job overflows the initial binner slot. The bug dates back to the conversion from a dedicated overflow BO (where writing the full BO size was correct) to the slotted binner BO. | Aug 15, 2026 |
| CVE-2026-74453(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Zero the tile state data array before each BIN job The binner BO is a single 16MB buffer split into 512KB slots that are handed out to jobs at submission time and recycled as jobs complete, without ever being cleared. Each slot holds the job's Tile State Data Array (TSDA) at its start, followed by the tile allocation pool. While the tile allocation pool is only walked by the render thread through branches the binner generated during the current job, the TSDA is the PTB's own per-tile bookkeeping and is consumed by the hardware itself. Although the kernel sets the "Auto-initialise Tile State Data Array" flag in the tile binning mode configuration, the PTB demonstrably still acts on stale tile state left by the slot's previous user: the binner ends up creating invalid command streams with invalid primitive streams and branches, which can cause GPU hangs as observed in [1][2]. Zero the TSDA when the job's binning slot is configured. This clears 48 bytes per tile (~24KB for a 1080p frame) in the submission path, and guarantees the PTB never sees another job's tile state. The tile count is only checked for being non-zero today, so the 8-bit fields it comes from can describe a tile state array almost six times larger than the slot it has to live in. Bound it before the slot is handed out, since such size decides how much of the slot is left for the tile alloc pool. | Aug 15, 2026 |
| CVE-2026-74452(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/panthor: reject firmware sections with oversized data In panthor_fw_load_section_entry(), the data size to copy is calculated without validating it against the allocated section_size: section->data.size = hdr.data.end - hdr.data.start; If a crafted firmware sets data.size larger than the allocated memory, this could cause a heap buffer overflow in panthor_fw_init_section_mem() memcpy(section->mem->kmap, section->data.buf, section->data.size); Additionally, if the section->data.size exceeds the BO size, could this memset underflow the size calculation, leading to a massive out-of-bounds zeroing of kernel memory? memset(section->mem->kmap + section->data.size, 0, panthor_kernel_bo_size(section->mem) - section->data.size); Reject section entries whose initial data is larger than the section size. | Aug 15, 2026 |
| CVE-2026-74451(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/panthor: validate firmware interface structure sizes iface_fw_to_cpu_addr() only checks that the firmware-provided MCU virtual address points inside the shared section. The returned pointer is later used as a full firmware interface structure, so accepting an address near the end of the shared section can still lead to out-of-bounds accesses. Pass the expected object size to iface_fw_to_cpu_addr() and reject ranges that do not fit entirely in the shared section. | Aug 15, 2026 |
| CVE-2026-74450(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix pptable use-after-free amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table after dropping adev->pm.mutex. The sysfs path then copies from that pointer. A concurrent pp_table write can replace and free the allocation during the copy, causing a use-after-free. Change the DPM interface to copy into caller-provided storage while the mutex is held. Keep the size-only query for attribute discovery without exposing the driver-owned pointer. (cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631) | Aug 15, 2026 |
| CVE-2026-74449(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport If a plane reaches calculate_mcache_setting with a zero-area viewport, calculate_mcache_setting exits early with num_mcaches == 0 and mvmpg_width/height == 0. This will cause a divide-by-zero panic and can also cause an underflow on num_mcaches. Fix this by changing calculate_mcache_setting to bool and adding guards after each calculate_mcache_row_bytes call. If num_mcaches or mvmpg_width/height is zero, return a false. Callers will propagate the failure as a rejected mode, which prevents the panic. (cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da) | Aug 15, 2026 |
| CVE-2026-74448(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix QID bit leak in pqm_create_queue() When MES is enabled and amdgpu_amdkfd_alloc_kernel_mem() fails during the first queue creation for a process, pqm_create_queue() returns early via 'return retval' without going through the err_create_queue cleanup label. This means clear_bit(*qid, pqm->queue_slot_bitmap) is never called, leaving the reserved QID bit permanently set in queue_slot_bitmap. Over time this leaks QID slots, potentially exhausting all available queue slots. Fix this by replacing 'return retval' with 'goto err_allocate_pqn' so that clear_bit() is always called on the error path without touching the uninitialized pqn pointer. AILIKFD-813 (cherry picked from commit a107f74c38edbb80d6ab64dcaeeb292c14e9779f) | Aug 15, 2026 |
| CVE-2026-74447(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix uint32_t overflow in EOP ring buffer size alignment eop_ring_buffer_size in struct queue_properties is a u32. In kfd_queue_acquire_buffers() the expected EOP buffer size is computed as ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to 0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB BO, so CP EOP writes can land past the buffer and fault the GPU. Cast the operand to u64 so the alignment is computed in 64-bit; the size check in kfd_queue_buffer_get() then rejects the oversized request. (cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef) | Aug 15, 2026 |
| CVE-2026-74446(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: hold event_mutex while checkpointing CRIU events kfd_criu_checkpoint_events() counts the entries in p->event_idr via kfd_get_num_events(), allocates an array sized to that count, and then walks the same IDR to fill it. Neither the count nor the walk holds p->event_mutex. The CRIU checkpoint caller holds only p->mutex. Event create and destroy (kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not take p->mutex, so a second thread in the same process can insert or remove events between the count and the walk. If an event is inserted, the walk iterates more entries than were counted and writes past the end of the ev_privs allocation; if an event is removed, the walk dereferences an entry that is being freed. Hold p->event_mutex across the count and the walk so both observe a consistent view of p->event_idr. The lock is released before copy_to_user(), which only touches the local buffer. The caller already holds p->mutex and the create/destroy paths never take p->mutex, so the p->mutex -> p->event_mutex order is not inverted and no deadlock is introduced. (cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa) | Aug 15, 2026 |
| CVE-2026-74445(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: reject DX_BIND_QUERY without a DX context vmw_cmd_dx_bind_query() unconditionally dereferences sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer dereference from any render-node fd by submitting an execbuf with dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY opcode in the command stream: dx_ctx_node is left NULL and the kernel oopses on the assignment. The same NULL is then re-read in vmw_resources_reserve() via vmw_context_get_dx_query_mob(). All sibling DX handlers fail-close on a missing dx_ctx_node using VMW_GET_CTX_NODE(). Use the same pattern here, returning -EINVAL up front before any relocation state is published. | Aug 15, 2026 |
| CVE-2026-74444(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject undersized headers up front. | Aug 15, 2026 |
| CVE-2026-74443(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: bound DMA command body size against suffix pointer vmw_cmd_dma() locates the DMA suffix at (unsigned long) &cmd->body + header->size - sizeof(*suffix) without checking that header->size is large enough to contain both cmd->body and the suffix. An undersized header makes the suffix pointer underflow back into the previous command in the bounce buffer. The verifier later writes suffix->maximumOffset, clobbering verified fields of an already-relocated earlier command -- a TOCTOU on the device-visible command stream that lets one command rewrite another's GMR id, surface id, or other authenticated fields. Reject the command if the body is too small for the suffix to fit. | Aug 15, 2026 |
| CVE-2026-74442(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: avoid destroy_workqueue(NULL) on vkms init failure Two paths through vmw_vkms_init() can leave vmw->crc_workq NULL while still leaving the rest of the driver in a state that calls vmw_vkms_cleanup() at module unload: 1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or returning an oversized buffer -- the common case on hosts without a VBLANK guestinfo entry -- early-returned before the workqueue allocation. 2. alloc_ordered_workqueue() returning NULL on memory pressure. vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which dereferences wq->name and panics. Fix the first case by removing the early return: vmw->vkms_enabled is already false on the rpci-failure path so no work will ever be queued, and allocating the workqueue unconditionally keeps the control flow simple. Fix the second case by guarding the cleanup with a NULL check, since alloc_ordered_workqueue() can still fail under low memory. | Aug 15, 2026 |
| CVE-2026-74441(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix race condition and ordering in port unregistration A synchronization issue exists during port unregistration where pending partner work items can race against workqueue destruction, leading to use-after-free conditions: cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:__queue_work+0x83/0x4a0 Call Trace: <IRQ> __cfi_delayed_work_timer_fn+0x10/0x10 run_timer_softirq+0x3b6/0xbd0 sched_clock_cpu+0xc/0x110 irq_exit_rcu+0x18d/0x330 fred_sysvec_apic_timer_interrupt+0x5e/0x80 Fix this by ensuring strict ordering and proper serialization during teardown: 1. Move ucsi_unregister_partner() to the beginning of the teardown sequence and protect it under the connector mutex lock. 2. Ensure all pending partner tasks are explicitly flushed and finished before the workqueue is destroyed. 3. Switch from mod_delayed_work() to a cancel_delayed_work() and queue_delayed_work() sequence. This guarantees that items currently marked as pending won't be scheduled an additional time, preventing a double release of resources which leads to the following crash: Oops: general protection fault, probably for non-canonical address 0xdead000000000122: 0000 [#1] SMP NOPTI Workqueue: cros_ec_ucsi.3.auto-con2 ucsi_poll_worker RIP: 0010:ucsi_poll_worker+0x65/0x1e0 Call Trace: <TASK> process_scheduled_works+0x218/0x6d0 worker_thread+0x188/0x3f0 __cfi_worker_thread+0x10/0x10 kthread+0x226/0x2a0 To ensure these rules are applied identically across both the normal teardown and the ucsi_init() error paths, consolidate the cleanup logic into a new helper, ucsi_unregister_port(). | Aug 15, 2026 |